Search

Changes are emerging that will significantly alter structure and operation of this century's distribution networks, and photovoltaic (PV) systems will play greater role in energy sector, with implications for power system reliability. Considering uncertainties in solar irradiance and electrical loads and incorporating them into the optimization problem within an appropriate methodology is becoming increasingly important in reshaping distribution networks. In this paper, uncertainty scenarios are handled with Monte Carlo Simulation (MCS) under genetic algorithm (GA) and differential evolution- (DE-) based optimization, and probability distribution functions (pdf) of bus voltages and line current are obtained to be used in chance-constrained stochastic programming. This present study focuses on investigating impact of uncertainties in PV system operating under different irradiance scenarios on power loss with probabilistic constraints in distribution networks instead of precise deterministic limits to contribute more efficient and reliable use of energy. By combining meta-heuristic optimization and MCS technique under one framework, this paper contributes to knowledge base of how to allocate PV plants within distribution networks under chance-constrained strategy. In order to show the effectiveness of the proposed methodology, obtained optimization results are tested using MCS under set of uncertainty conditions and network constraints are evaluated for limit violation probabilities. The effectiveness of this method is investigated based on comparative results of two different optimization methods through probabilistic analysis and simulation. [ABSTRACT FROM AUTHOR]

Power quality is the main problem with the power system network. Poor electricity quality may cause disruptions and financial challenges for consumers. Additionally, it could cause electronic gadgets to overheat, be damaged, or operate inadvertently. Transformers and other components of the power distribution system may also overheat and experience core saturation. This study investigates potential problems with the quality of the electricity in a photovoltaic linked power system. This paper suggests a new optimization method for day-ahead trading and control in DC microgrid power management (MG). The goal of the multiobjective optimization dispatch (MOOD) problem is to lower overall operational costs as well as the costs associated with power loss in efficient conservation systems and exhaust emission quantities such as nitrogen oxides, sulphur dioxide, and carbon dioxide. Using the weighted sum approach, the multiobjective optimization problem is reduced to a single optimization problem. The analytical hierarchy process (AHP) method is then used to calculate the weight coefficients while accounting for each objective function's preferences. Power balancing, high levels of renewable energy penetration, the most effective scheduling of battery charging and discharging, control of load curtailment, and the technical limitations of the system are all taken into account when evaluating the system's performance in both grid-connected and standalone operation modes. The ant lion optimizer (ALO) technique is taken into account to tackle MOOD, comparing the effectiveness of the proposed method to other well-known heuristic optimization techniques. The simulation's results demonstrate how effectively the proposed strategy can address the coordinated control and optimization dispatch difficulties. They also found that operating the MG system economically in grid-connected mode can save overall costs by roughly 4.70% compared to doing it in independent mode. [ABSTRACT FROM AUTHOR]

Maximum power point tracking (MPPT) is becoming more and more important in the optimization of photovoltaic systems. Several MPPT algorithms and nonlinear controllers have been developed for improving the energy yield of PV systems. On the one hand, most of the conventional algorithms such as the incremental conductance (INC) demonstrate a good affinity for the maximum power point (MPP) but often fail to ensure acceptable stability and robustness of the PV system against fast-changing operating conditions. On the other hand, the MPPT nonlinear controllers can palliate the robust limitations of the algorithms. However, most of these controllers rely on expensive solar irradiance measurement systems or complex and relatively less accurate methods to seek the maximum power voltage. In this paper, we propose a new hybrid MPPT based on the incremental conductance algorithm and the integral backstepping controller. The hybrid scheme exploits the benefits of the INC algorithm in seeking the maximum power voltage and feeds a nonlinear integral backstepping controller whose stability was ensured by the Lyapunov theory. Therefore, in terms of characteristics, the overall system is a blend of the MPP-seeking potential of the INC and the nonlinear and robust potentials of the integral backstepping controller (IBSC). It was noted that the hybrid system successfully palliates the conventional limitations of the isolated INC and relieves the PV system from the expensive burden of solar irradiance measurement. The proposed hybrid system increased the operational efficiency of the PV system to 99.94% and was found better than the INC MPPT algorithm and 8 other recently published MPPT methods. An extended validation under experimental environmental conditions showed that the hybrid system is approximately four times faster than the INC in tracking the maximum power with better energy yield than the latter. [ABSTRACT FROM AUTHOR]

The photovoltaic(PV) system's efficiency can be improved with the aid of effective solar PV cell modeling. However, flawed solar cell parameters affect PV cell modeling incorrectly. The manufacturers are usually not providing all the necessary data for the exact modeling of PV cells. It is therefore necessary to efficiently predict the parameters of the PV cell. The literature discusses various optimization algorithms, but the suboptimal outcomes are obtained by most of the algorithms due to their convergence toward local minima. This paper introduces a new stochastic optimization algorithm for the estimation of solar PV cell parameters. Therefore, for the evaluation of the solar cell, a new novel chaotic algorithm is introduced in this paper called the chaotic tunicate swarm algorithm (CTSA). The proposed algorithm has a new function called an outstanding mathematical model of adaptive weights to stimulate negative and positive inputs from the spreading wave in order to find the best way to connect food with an excellent exploitation tendency and exploratory ability. For the double‐diode model, the computation time of the chaotic variants (CTSA1‐1.1885, CTSA2‐1.2502, CTSA3‐1.2962, CTSA4‐1.1204, and CTSA5‐1.2214) is better than the rest of the compared algorithms (particle swarm optimization [PSO]‐17.4532, tunicate swarm algorithm (TSA)‐2.5278, Harris hawks optimization [HHO]‐10.8942, ant lion optimizer [ALO]‐15.0214, and atom search optimization [ASO]‐9.5214). For the triple‐diode model, the computation time of the chaotic variants (CTSA1‐1.2658, CTSA2‐1.3520, CTSA3‐1.3056, CTSA4‐1.2290, and CTSA5‐1.3859) is better than the rest of the compared algorithms (PSO‐18.5421, TSA‐3.2568, HHO‐9.8754, ALO‐13.5841, and ASO‐11.8412). The superiority of proposed algorithm is established using ranking test, statistical error analysis, and sensitivity temperature variation. [ABSTRACT FROM AUTHOR]

The modeling of a solar PV system is challenging due to its nonlinear current vs. voltage characteristics. Although various optimization techniques have been applied for the parameter estimation of the solar PV system, there is still a scope to attain the best-optimized results. This paper uses a new meta-heuristic optimization algorithm and a classical technique named Ali Baba and the Forty Thieves (AFT) with Newton Rapson (NR) method to estimate solar PV system parameters. The well-known story of Ali Baba and the Forty Thieves has inspired the AFT. Besides, the inappropriate objective function used in earlier research to extract parameters from solar PV models is recognized. The experimental findings demonstrate that the suggested approach performs better when compared to state-of-the-art algorithms. Between the measured data and the computed data for AFT, the root mean square error values for the five PV models, such as single diode model (SDM), double diode model (DDM), Photowatt-PWP201, STM6-40/36, and STP6-120/36, are respectively 7.72 × 10−04 ± 6.121 × 10−16, 7.412 × 10−04 ± 9.52 × 10−06, 2.052 × 10−03 ± 3.05 × 10−17, 0.001721922 ± 2.19 × 10−17, and 0.014450817 ± 3.42 × 10−16. In terms of accuracy, the obtained results indicate that the proposed AFT algorithm is more efficient than the other optimization techniques available in the literature. The excellent correlation between the estimated parameters from characteristic curves and observed data for SDM, DDM, Photowatt-PWP201, STM6-40/36, and STP6-120/36 demonstrates that the proposed AFT is a potential option among the techniques available in the literature. The Friedman and Wilcoxon tests have been used to assess the statistical validity of the proposed algorithms. [ABSTRACT FROM AUTHOR]

This paper considers the problem of tracking the global maximum power point (GMPP) in partially shaded conditions (PSCs) as a multiobjective optimization problem and solves it using a novel multiobjective optimization algorithm on the basis of Bayesian optimization formulation. Bayesian optimization is a metamodel-based global optimization method that is able to balance exploration and exploitation. The Pareto solutions are obtained by using a multiobjective Bayesian optimization algorithm. Also, a new acquisition function is proposed to improve the diversity and convergence of the Pareto solutions. Two objective functions are introduced to remove the large tracking errors and oscillations of the operating point around the GMPP. The suggested method is implemented online for GMPP tracking so that the suggested method monitors any change in environmental conditions and generates the optimal duty cycle for the DC-DC converter for the GMPP tracking (GMPPT) by the PV array. Several multipeak PSC scenarios are implemented and simulated to show efficiency of the suggested approach. The MATLAB/SIMULINK is employed to implement a photovoltaic (PV) system comprising a PV array, a boost converter, and the proposed multiobjective Bayesian optimization algorithm (MOBOA). The simulation results show a very satisfactory performance of the MOBOA in terms of transient state and steady-state oscillations and tracking speed. [ABSTRACT FROM AUTHOR]

This paper discusses and analyses the work done in developing a Nature‐inspired optimization algorithm in a solar PV system for tracking the global maximum power point (GMPP) in partial shaded condition (PSC). Partial shading is a situation where PV panels connected in series do not receive the same solar radiation, thus exhibiting different I‐V characteristics for the individual panel. Under PSC, solar PV system output exhibits multiple local maximum power point (MPP) and a unique global MPP on the Power‐Voltage curve. Conventional maximum power point tracking (MPPT) techniques such as Perturb and Observe (P&O), incremental conductance (IC), and Hill Climbing (HC) method can only track MPP under uniform insolation conditions. It may fail to track GMPP in case of PSC and get trapped in local MPP, thereby causing loss of power that could have been tapped if the operation would have been at GMPP. To overcome the problem posed by PSC, researchers are applying the nature‐inspired optimization algorithm for tracking GMPP under partial shading conditions with fairly good results. Nature‐inspired optimization algorithm offers the advantage of solving multivariable nonlinear objective functions with constraints by exploiting the search space and can converge quickly to GMPP. Some of the most recent and famous nature‐inspired algorithms have been discussed and compared here. Simulation and hardware results of some of them are also taken in order to compare them effectively. Simulation results show that the Most Valuable Player Algorithm (MVPA) takes the least time to track the MPP in all the cases, and the MPP tracked is also comparable to the maximum while PSO with differentially perturbed velocity (PSO_DV) takes the maximum time to track the MPP in all cases. [ABSTRACT FROM AUTHOR]

Summary: Enhancing distribution system operation accomplished with the integration of renewable energy resources (RERs) has several technical, economical, and environmental dimensions. In this regard, this paper presents an optimal integration procedure of Distributed Generation (DG) based on Photovoltaic panel (PV) and Distribution Static Compensator (DSTATCOM) in Electrical Distribution System (EDS). The proposed procedure is formulated as a multi‐objective function (MOF). The considered objectives that reflect the technical, economic, and environmental issues, are Active Power Loss Level (APLL), Short Circuit Level (SCL), Voltage Deviation Level (VDL), Net Saving Level (NSL), and Environmental Pollution Reduction Level (EPRL). The proposed procedure investigates several hybrid optimization methods that combine the firefly algorithm (FA) with various acceleration coefficients PSO algorithms to improve the overall solution quality of the hybrid algorithms compared with the individual algorithms. To prove the capability of the proposed procedure, four different cases are tested on IEEE 33‐bus and 69‐bus EDSs. Added to that, the proposed algorithms are extended to practical Algerian EDS in Adrar City 205‐bus. Results obtained by the hybrid FA‐SCAC‐PSO algorithm showed that the simultaneous allocation of multiple DG and DSTATCOM in all standard and practical test systems significantly reduces the loss and enhances the voltage profile. An energy‐efficient analysis to proceed for different cases studied based on the best hybrid FA‐SCAC‐PSO algorithm to reach the best value of MOF compared to other algorithms, moreover the capability to achieve the optimal allocation of DG and DSTATCOM by maintaining the voltages profile within the permissible limit, whatever the variation of load. Significant technical economic and environmental achievements are found for different case studies especially in the existence of DGs and DSTATCOM devices. [ABSTRACT FROM AUTHOR]

Summary Partial shading conditions generate multiple peaks in the P‐V curve of photovoltaic (PV) arrays. Smart MPPT optimization techniques should be used to capture the global peak (GP) and avoid being trapped in one of the local peaks (LPs). The tracking of the GP should be fast and reliable to enhance the stability and increase the generated efficiency of the PV systems. Bat algorithm (BA) is one of the fastest swarm optimization techniques. The BA control parameters (BA‐CPs) have substantial effects on their performance. This paper introduced a nested BA strategy called BA‐BA strategy to determine the optimal values of control parameters of BA for the lowest convergence time and failure convergence rate to be used in the online MPPT of PV systems. The inner BA loop used the BA as an MPPT of the PV system, meanwhile, the outer BA loop used the inner BA loop as a fitness function to determine the optimal BA‐CPs for minimum convergence time and failure rate. Ten benchmark BA strategies, particle swarm optimization (PSO), and cuckoo search (CS) algorithm have been used to compare their results with the results obtained from the BA‐BA strategy. The results of the BA‐BA strategy reduced the convergence time of 250% of the time associated with the best benchmark BA strategy, 518%, and 395% as compared to the PSO, and CS algorithm, respectively. The simulation and experimental results obtained from the BA‐BA strategy showed its superior for determining the optimal control parameters for BA in MPPT of PV systems or any other applications. [ABSTRACT FROM AUTHOR]

In this paper, a new method of replacing the conventional honeycomb aluminum panel with 3D metal printing on the microsatellite is presented. The multiobjective optimization method is used to optimize the temperature difference, compression strength, shear strength, and weight of the new type of solar panel structure. The relationships between the structural parameters and optimization targets are established, and the influence of five factors on thermal and structural properties is analyzed. Finally, a group of better structural parameters of the panel is obtained. The relative deviations between simulation analysis and model are 27.45%, 6.12%, 1.365%, and 3.27%, respectively. The optimization results show that the regression model can be used to predict thermal and structural properties of the panel, and the establishment of the model is effective. The analysis results show that the performances can be improved by 91.62%, 46.94%, 17.91%, and 10.28%, respectively. The optimized results are used for 3D metal printing, and the new type of solar panel is obtained. It is proved that the method can effectively improve the thermal and structural properties of the panel and can effectively shorten the development and manufacture cycle of the panel and also reduce the cost. It has high engineering application value. [ABSTRACT FROM AUTHOR]

Electric vehicles (EVs) charging stations with a photovoltaic (PV) system for day-time charging have been studied. This paper investigates the issues such as how to coordinate the EVs customers for coordinated charging, maximize photovoltaic utilization, and reduce customers cost of EVs charging and operator electricity. Firstly, an ideal charging load curve was built through using the linear programming algorithm. This optimal curve, which realized maximum photovoltaic power and minimum electricity cost, was used as the objective curve. Secondly, a customer response model was utilized, to propose an optimization method and strategy for charging service tariffs. Particle swarm optimization algorithm was used for time-of-use tariffs and peak-flat-valley time division so that the charging load after price regulation was adjusted to best fit the objective curve, and both the EVs customers and the operator benefit from this. Finally, the proposed model and method have been verified by two cases. [ABSTRACT FROM AUTHOR]

In order to deliver the maximum available power to the load under the condition of varying solar irradiation and environment temperature, maximum power point tracking (MPPT) technologies have been used widely in PV systems. Among all the MPPT schemes, the chaos method is one of the hot topics in recent years. In this paper, a novel two-stage chaos optimization method is presented which can make search faster and more effective. In the process of proposed chaos search, the improved logistic mapping with the better ergodic is used as the first carrier process. After finding the current optimal solution in a certain guarantee, the power function carrier as the secondary carrier process is used to reduce the search space of optimized variables and eventually find the maximum power point. Comparing with the traditional chaos search method, the proposed method can track the change quickly and accurately and also has better optimization results. The proposed method provides a new efficient way to track the maximum power point of PV array. [ABSTRACT FROM AUTHOR]