Search

Abstract: Increasing demand of bandwidth in communication satellites has forced satellite links to be designed in Ku bands and above. But at these frequencies, rain and other tropospheric elements result in large attenuation. To mitigate the tropospheric attenuation of microwave satellite signals above 10GHz using any standard Fade Mitigation Technique (FMT), it is essential to have a priori knowledge about the level of attenuation. Hence, short-term rain attenuation prediction models play a key role in maintaining the link in which necessary compensation can be applied depending on the early information of attenuation. This paper presents a method of attenuation prediction using Adaptive Artificial Neural Network. Here In situ Learning Algorithm (ILA) has been used to enable the system to track the non-stationary nature of the attenuation. To validate this, Ku Band data, collected at three different sites in India have been used for the purpose of prediction. The performance of the algorithm is determined through the estimation of prediction accuracy by comparing the predicted values with the measured data. Results obtained using the mentioned technique shows considerably good accuracy even up to 20s of prediction interval with acceptable ratio between the under and over predictions. The prediction performance is evaluated for different prediction intervals. Furthermore the present model is also compared with the persistence model and the relative performance is quantified. [Copyright &y& Elsevier]

general neural network based methodology that has the potential to replace the computationally-intensive site-specific seismic analysis of structures is proposed in this paper. The basic framework of the methodology consists of a feed forward back propagation neural network algorithm with one hidden layer to represent the seismic potential of a region and soil amplification effects. The methodology is implemented and verified with parameters corresponding to Delhi city in India. For this purpose, strong ground motions are generated at bedrock level for a chosen site in Delhi due to earthquakes considered to originate from the central seismic gap of the Himalayan belt using necessary geological as well as geotechnical data. Surface level ground motions and corresponding site-specific response spectra are obtained by using a one-dimensional equivalent linear wave propagation model. Spectral acceleration values are considered as a target parameter to verify the performance of the methodology. Numerical studies carried out to validate the proposed methodology show that the errors in predicted spectral acceleration values are within acceptable limits for design purposes. The methodology is general in the sense that it can be applied to other seismically vulnerable regions and also can be updated by including more parameters depending on the state-of-the-art in the subject. [ABSTRACT FROM AUTHOR]