Search

Both the lack of the downward regulation capacity and the transmission capacity limit have led to considerable wind power curtailments in China. The battery energy storage system (BESS) provides a new solution to reduce the wind power curtailments due to its relatively high energy density and flexible installed location. In this paper, a new bi-level programming model is proposed to optimize the size and location of BESS for reducing the wind curtailments. The revenues of BESS, when it is located either at the wind farm or the load center, are considered comprehensively. Moreover, a numerical optimization algorithm is developed to solve the proposed model. Simulation results demonstrate the validity of the proposed model and developed algorithm. They also reveal that the BESS located at the load center offers more net profit compared to the one located at the wind farm. Subsequently, sensitivity analysis is performed to assess the effect of key parameters on the optimal values of BESS. [ABSTRACT FROM AUTHOR]

Abstract: In China, both the mountainous areas and the number of people who live in mountain areas occupy a significant proportion. When production accidents or natural disasters happen, the residents in mountain areas should be evacuated and the evacuation is of obvious importance to public safety. But it is a pity that there are few studies on safety evacuation in rough terrain. The particularity of the complex terrain in mountain areas, however, makes it difficult to study pedestrian evacuation. In this paper, a three-dimensional surface cellular automata model is proposed to numerically simulate the real time dynamic evacuation of residents. The model takes into account topographic characteristics (the slope gradient) of the environment and the biomechanics characteristics (weight and leg extensor power) of the residents to calculate the walking speed. This paper only focuses on the influence of topography and the physiological parameters are defined as constants according to a statistical report. Velocity varies with the topography. In order to simulate the behavior of a crowd with varying movement velocities, and a numerical algorithm is used to determine the time step of iteration. By doing so, a numerical simulation can be conducted in a 3D surface CA model. Moreover, considering residents evacuation around a gas well in a mountain area as a case, a visualization system for a three-dimensional simulation of pedestrian evacuation is developed. In the simulation process, population behaviors of congestion, queuing and collision avoidance can be observed. The simulation results are explained reasonably. Therefore, the model presented in this paper can realize a 3D dynamic simulation of pedestrian evacuation vividly in complex terrain and predict the evacuation procedure and evacuation time required, which can supply some valuable information for emergency management. [Copyright &y& Elsevier]

• A data-assimilation method has been proposed for the burnup distribution. • The three-dimensional variational algorithm and artificial neutral network algorithm were applied. • The data-assimilation method has been applied to PWR operated in China. In this paper, a data-assimilation method has been proposed and applied for the burnup distribution of PWR. The burnup distribution is significant for the safety and economy of the reactor, as it is essential for the fuel-reloading design and optimization. Due to the fact that the burnup distribution cannot be measured directly during the reactor operation, the numerical simulation is widely applied in reactor engineering. However, there definitely exist differences between the numerical simulation and the actual core due to some unavoidable factors, such as component manufacturing deviation, uneven flow distribution and so on. These differences would induce the errors to the simulation values of power distributions and hence to the burnup distributions. Therefore, a data-assimilation method for the burnup distribution has been proposed, aiming at reducing the burnup-distribution errors with application of the power-distribution measurements. In our research, the three-dimensional variational (3DVAR) algorithm was applied for burnup-distribution calibration and the artificial neutral network (ANN) algorithm was applied to establish the complex relations between burnup distribution and power distribution. As engineering verification, the proposed data-assimilation method has been applied to the CNP1000 PWR operated in China. The numerical results indicated that the burnup-distribution errors can be reduced notably, as the maximum value of relative errors for power distribution can be reduced from 9.53% to 5.11%. [ABSTRACT FROM AUTHOR]

Abstract: This paper presents a nonlinear piecewise smooth dynamical system of the trajectory of deviated wells according to engineering background. An optimal control model is established and the necessary conditions for optimality are proved via maximum principle. The optimal control problem is solved by a revised Hooke–Jeeves algorithm. The uniform design technique has been incorporated into the revised Hooke–Jeeves algorithm to handle the multimodal function. Computer simulation is used for this paper, and the numerical example illustrates the validity and efficiency of the algorithm. The procedure demonstrates its advantages in practical applications in Liaohe Oil Field. [Copyright &y& Elsevier]

Abstract: In this paper, an improved particle swarm optimization (IPSO) algorithm is proposed. Besides the individual best position and the global best position, a nominal average position of the swarm is introduced in IPSO. The performance of IPSO is compared to different PSO variants with five well-known benchmark functions. The experimental results show that the proposed IPSO algorithm improves the searching performance on the benchmark functions. And then, IPSO, as well as other PSO variants, is applied to optimal tuning of Proportional–Integral–Derivative (PID) gains for a typical PID control system of water turbine governor. The computer simulation results of an actual hydro power plant in China show that IPSO algorithm has stable convergence characteristic and good computational ability, and it is an effective and easily implemented method for optimal tuning of PID gains of water turbine governor. [Copyright &y& Elsevier]

Purpose - Taking into account the long-term influences of the non-linear behavior of the material as well as the large deformation and contact conditions, the limiting factors of the computer simulation are the computer runtime and the memory requirement during solution of seismic response analysis for immersed tunnel. This research aims to overcome these problems. Design/methodology/approach - This research deals with parallel explicit finite element simulation with domain decomposition for seismic response analysis of immersed tunnel, which is the non-linear and time-dependent behavior of complex structures in engineering. A domain decomposition method based on parallel contact algorithm and dynamic-explicit time integration procedure are used, and the latter is used for the solution of the semi-discrete equations of motion, which is very suited for parallel processing. Using the high performance computer SGI Onyx3800, the seismic response analysis of the immersed tunnel in Shanghai is processed with more than 1.2 million nodes and more than 1 million elements in final finite element model. Findings - The results show numerical scalability of this algorithm and reveal the dangerous joints in this immersed tunnel under Tangshan seismic acceleration, and it could also provide references for the antiseismic design of the immersed tunnel. Originality/value - With the increasing demands in the scale, accuracy and speed of numerical simulation in geotechnical engineering, parallel computing has its great application in this area. This paper fulfils an identified method need, and it is believed more and more research work will be devoted to this research field in the near future. [ABSTRACT FROM AUTHOR]