Search

This paper deals with the analysis of TRIP steel HCT690 deformation behaviour. The mechanical properties and deformation characteristics of the tested material are determined using selected material tests and tests that consider the required stress states used to define the yield criterion boundary condition and subsequent deformation behaviour in the region of severe plastic deformation. The measured data are subsequently implemented in the numerical simulation of sheet metal forming, where they are used as input data for the computational process in the form of a selected material model defining the yield criterion boundary and, furthermore, the material hardening law during deformation of the material. The chosen numerical simulation process corresponds to the sheet metal forming process, including the subsequent spring-back of the material, when the force does not affect the material. Furthermore, the influence of the chosen computational model and selected process parameters on the deformation and spring-back process of the material is evaluated. In addition to that, at the end of the paper, the results from the numerical simulation are compared with experimentally produced sheet stamping. [ABSTRACT FROM AUTHOR]

One-dimensional fourth-order boundary value problems (BVPs) play a critical role in engineering applications, particularly in the analysis of beams. Current numerical investigations primarily concentrate on homogeneous boundary conditions. In addition to its high precision advantages, the Hermite finite element method (HFEM) is capable of directly computing both the function value and its derivatives. In this paper, both the cubic and quintic HFEM are employed to address two prevalent non-homogeneous fourth-order BVPs. Furthermore, a priori error estimations are established for both BVPs, demonstrating the optimal error convergence order in H 2 semi-norm and L 2 norm. Finally, a numerical simulation is presented to validate the theoretical results. [ABSTRACT FROM AUTHOR]

The intricate geometry and thin walls of the motor housing in new energy vehicles render it susceptible to casting defects during conventional casting processes. However, the lost-foam casting process holds a unique advantage in eliminating casting defects and ensuring the strength and air-tightness of thin-walled castings. In this paper, the lost-foam casting process of thin-walled A356 alloy motor housing was simulated using ProCAST software (2016.0). The results indicate that the filling process is stable and exhibits characteristics of diffusive filling. Solidification occurs gradually from thin to thick. Defect positions are accurately predicted. Through analysis of the defect volume range, the optimal process parameter combination is determined to be a pouring temperature of 700 °C, an interfacial heat transfer coefficient of 50, and a sand thermal conductivity coefficient of 0.5. Microscopic analysis of the motor housing fabricated using the process optimized through numerical simulations reveals the absence of defects such as shrinkage at critical locations. [ABSTRACT FROM AUTHOR]

The experimental and numerical simulation analysis of a TiAl alloy by laser metal deposition technology is presented in this paper. The research examines the macroscopic morphology, microstructure, and mechanical properties of samples as laser power varies. It also delves into how the temperature field and residual stress evolve under different laser powers. The results reveal that the microstructure of samples is mainly composed of α2-Ti3Al phase and a γ-TiAl phase and that the details of the microstructure are significantly affected by laser power. As laser power increases, coarse lamellar structure content increases, corresponding to a decrease in α2 phase content. The deposited layer hardness ranges from 550 HV to 600 HV, and the average deposition layer hardness decreases with increased laser power. Simulation results predict the molten pool's size, temperature, and residual stresses. A significant increase in the molten pool size is observed when the laser power exceeds 1000 W, and the measured molten pool depths correspond closely to simulation predictions. However, significant tensile stresses are generated in the deposition layer due to high cooling rates, mainly in the x direction. Cracks are observed on the surface of the deposition layer at all laser powers. [ABSTRACT FROM AUTHOR]

Traditional fossil energy sources still dominate the world energy structure. And fully utilizing biomass is a viable approach for energy transition. A bubbling fluidized bed has better heat and mass transfer, while particle agglomeration limits the development of its industrial application. In this paper, two-phase flow characteristics of a bubbling fluidized bed are investigated by combining numerical simulations and fluidized bed gasification experiments. Numerical simulations found that the bed fluidization height reached twice the initial fluidization height at the 0.054 m initial fluidization height with uniform particle distribution. Fluidized bed gasification experiments found that syngas yield increased with increasing temperature. The carbon conversion efficiency reached 79.3% and the effective gas production was 0.64 m3/kg at 850 °C. In addition, when the water vapor concentration reached 15%, the carbon conversion efficiency and effective gas production reached the maximum values of 86.01% and 0.81 m3/kg, respectively. [ABSTRACT FROM AUTHOR]

Multi-material additive manufacturing using heterogeneous powders as raw materials is one of the important development directions of metal additive manufacturing technology. The evaporation behavior of heterogeneous powders in the selective laser melting (SLM) process has a significant influence on the accuracy of chemical composition control and the quality of the final product. In this paper, the fusion process of Fe20Mn (80 wt.% Fe and 20 wt.% Mn) heterogeneous powder, Fe and Mn elemental powders, and Fe20Mn pre-alloyed powder is numerically simulated using FLOW-3D® software and partially validated through SLM experimental results. The morphology and the characteristics of the flow field and temperature field in the melt pool for four kinds of powder materials are analyzed. The influence of the elemental evaporation behavior of different powders on the mass loss of the Mn element is discussed. The results show that the excessive accumulation of heat increases the maximum temperature of the melt pool, thus increasing mass loss. The Fe20Mn heterogeneous powder has a wider heat-affected zone and a higher peak value of temperature, nearly 400 K higher than that of the Fe20Mn pre-alloyed powders, which exhibits an intensive evaporation behavior. The mass loss of the Mn element obtained from the SLM experiment for Fe20Mn heterogeneous powders forming parts is more than the Fe20Mn pre-alloyed powders' forming parts for different laser powers, up to 17 wt.% at P = 120 W. This tendency is consistent with the numerical analysis of the effect of evaporation behavior of Fe–Mn heterogeneous powder during the SLM process. This study provides the necessary theoretical reference and process guidance for realizing the precise control of the SLM composition of a heterogeneous powder in multi-material additive manufacturing caused by evaporation behavior. [ABSTRACT FROM AUTHOR]

As industrial modernization advances rapidly, the need for energy becomes increasingly urgent. This paper aims to enhance the current burner design by optimizing the combustion calorific value, minimizing pollutant emissions, and validating the accuracy of the burner model using experimental data from previous studies. The enhanced porous medium burner model is used to investigate the burner's combustion and pollutant emission characteristics at various flow rates, equivalence ratios, combustion orifice sizes, and porosity of porous media. In comparison with the previous model, the combustion traits during ethylene combustion and the emission properties of pollutants under various operational circumstances have been enhanced with the enhanced porous medium burner model. The maximum temperature of ethylene combustion in the enhanced model is 174 k higher than that before the improvement, and the CO emissions are reduced by 31.9%. It is believed that the findings will serve as a guide for the practical implementation of porous media combustion devices. [ABSTRACT FROM AUTHOR]

The urban underlying surface may affect the thunderstorm process. However, current research on this phenomenon is still in its infancy. This paper aimed to analyze the influence of the urban underlying surface on the evolution of thunderstorm organization through ground observation and numerical simulation. The results indicated that when the thunderstorm system with strong synoptic conditions passed through the built-up area of Beijing, it exhibited obvious bifurcation and detour. The dynamic field of near-surface cold pools could serve as diagnostic indicators for understanding how the urban underlying surface affects the thunderstorm process. The large-scale compact-rise clusters in the city center could alter the movement direction and path of the cold pool outflow, thereby influencing the thunderstorm organization process. In addition to the spatial configuration of the building complex, the city size might also be an important factor influencing the thunderstorm process. This study might provide a fundamental foundation and technical support for predicting and assessing urban thunderstorm disasters. [ABSTRACT FROM AUTHOR]

Traditional polymer curing techniques present challenges such as a slow processing speed, high energy consumption, and considerable initial investment. Frontal polymerization (FP), a novel approach, transforms monomers into fully cured polymers through a self-sustaining exothermic reaction, which enhances speed, efficiency, and safety. This study focuses on acrylamide hydrogels, synthesized via FP, which hold significant potential for biomedical applications and 3D printing. Heat conduction is critical in FP, particularly due to its influence on the temperature distribution and reaction rate mechanisms, which affect the final properties of polymers. Therefore, a comprehensive analysis of heat conduction and chemical reactions during FP is presented through the establishment of mathematical models and numerical methods. Existing research on FP hydrogel synthesis primarily explores chemical modifications, with limited studies on numerical modeling. By utilizing Differential Scanning Calorimetry (DSC) data on the curing kinetics of polymerizable deep eutectic solvents (DES), this paper employs Malek's model selection method to establish an autocatalytic reaction model for FP synthesis. In addition, the finite element method is used to solve the reaction–diffusion model, examining the temperature evolution and curing degree during synthesis. The results affirm the nth-order autocatalytic model's accuracy in studying acrylamide monomer curing kinetics. Additionally, factors such as trigger temperature and solution initial temperature were found to influence the FP reaction's frontal propagation speed. The model's predictions on acrylamide hydrogel synthesis align with experimental data, filling the gap in numerical modeling for hydrogel FP synthesis and offering insights for future research on numerical models and temperature control in the FP synthesis of high-performance hydrogels. [ABSTRACT FROM AUTHOR]

The soliton propagation of the fractional-in-space nonlinear Schrodinger equation (NLSE) is much more complicated than that of the corresponding integer NLSE. The aim of this paper is to discover some novel fractal soliton propagation behaviors (FSPBs) of this fractional-in-space NLSE. Firstly, the exact solution is compared with the present numerical solution, and the validity and accuracy of the present numerical method are verified. Secondly, the effect of fractional derivatives on soliton propagation is explored through the present numerical simulation results. At the same time, the present method is extended to the three-dimensional fractional-order NLSE. Finally, some novel FSPBs of the fractional-in-space NLSE are given. [ABSTRACT FROM AUTHOR]

Inspired by the airway for phonation, fluid flow in an idealized model within a sudden expansion and contraction channel with a geometrically symmetric structure is investigated, and the nonlinear behaviors of the flow therein are explored via numerical simulations. Numerical simulation results show that, as the Reynolds number (Re = U0H/ν) increases, the numerical solution undergoes a pitchfork bifurcation, an inverse pitchfork bifurcation and a Hopf bifurcation. There are symmetric solutions, asymmetric solutions and oscillatory solutions for flows. When the sudden expansion ratio (Er) = 6.00, aspect ratio (Ar) = 1.78 and Re ≤ Rec1 (≈185), the numerical solution is unique, symmetric and stable. When Rec1 < Re ≤ Rec2 (≈213), two stable asymmetric solutions and one symmetric unstable solution are reached. When Rec2 < Re ≤ Rec3 (≈355), the number of numerical solution returns one, which is stable and symmetric. When Re > Rec3, the numerical solution is oscillatory. With increasing Re, the numerical solution develops from periodic and multiple periodic solutions to chaos. The critical Reynolds numbers (Rec1, Rec2 and Rec3) and the maximum return velocity, at which reflux occurs in the channel, change significantly under conditions with different geometry. In this paper, the variation rules of Rec1, Rec2 and Rec3 are investigated, as well as the maximum return velocity with the sudden expansion ratio Er and the aspect ratio Ar. [ABSTRACT FROM AUTHOR]

Wind flow over complex terrain is strongly influenced by the topographical features of the region, resulting in unpredictable local wind characteristics. This paper employs numerical simulation to study the wind flow at a towering peak extending out of a steep mountainside and the wind-induced effect on onsite landscape platforms. First, the wind flow from seven different directions is explored via 3D numerical simulations, and the wind load distribution on the platforms is highlighted. Second, a 2D numerical simulation is conducted to evaluate the wind speedup effect at the side peak, examining the influence of the side peak height and the mountainside steepness on the wind speedup factor. The numerical simulations presented in this research were validated by replicating a published numerical and experimental study. The results illustrate the amplifying and blocking effects of the surrounding topography, yielding unpredictable and nonuniform wind pressure distribution on the platforms. The presence of the side peak leads to a significant increase in the speedup factor, and the side peak height and the mountainside steepness have a moderate influence on the value of the speedup factor. Additionally, the speedup factor obtained from this study varies significantly, especially near the surface, from the recommendations of several wind load standards. Consequently, the impact of the local terrain and the wind speedup effect must be thoroughly assessed to ensure the structural integrity of structures installed at a similar topography. [ABSTRACT FROM AUTHOR]