Search

Hydrogen is an emerging technology changing the context of heating with cleaner combustion than traditional fossil fuels. Studies indicate the potential to repurpose the existing natural gas infrastructure, offering consumers a sustainable, economically viable option in the future. The integration of hydrogen in combined heat and power systems could provide residential energy demand and reduce environmental emissions. However, the widespread adoption of hydrogen will face several challenges, such as carbon dioxide emissions from the current production methods and the need for infrastructure modification for transport and safety. Researchers indicated the viability of hydrogen in decarbonizing heat, while some studies also challenged its long-term role in the future of heating. In this paper, a comprehensive literature review is carried out by identifying the following key aspects, which could impact the conclusion on the overall role of hydrogen in heat decarbonization: (i) a holistic view of the energy system, considering factors such as renewable integration and system balancing; (ii) consumer-oriented approaches often overlook the broader benefits of hydrogen in emission reduction and grid stability; (iii) carbon capture and storage scalability is a key factor for large-scale production of low-emission blue hydrogen; (iv) technological improvements could increase the cost-effectiveness of hydrogen; (v) the role of hydrogen in enhancing resilience, especially during extreme weather conditions, raises the potential of hydrogen as a flexible asset in the energy infrastructure for future energy supply; and finally, when considering the UK as a basis case, (vi) incorporating factors such as the extensive gas network and unique climate conditions, necessitates specific strategies. [ABSTRACT FROM AUTHOR]

The UK government has announced its ten-point plan to annually install 600,000 low-carbon heat pumps by 2028. However, there is a lack of evidence showing potential overheating risk in dwellings retrofitted with heat pumps. This paper examines the prevalence and magnitude of summertime overheating across 24 naturally ventilated social housing dwellings retrofitted with ground source heat pumps (GSHPs). The dwellings are located in a socially deprived area in Oxford (UK). The empirical study included longitudinal monitoring of indoor temperatures in the living rooms and bedrooms during the non-heating seasons of 2021 and 2022 (May–September), which included a record-breaking heatwave in July 2022. Indoor temperature and CO2 levels in bedrooms were monitored across a subset of six dwellings alongside the monitoring of window opening state in three bedrooms to understand the effect of natural ventilation in removing excess heat. About 136 thermal comfort surveys were conducted to ascertain the subjective responses of residents. Overheating risk assessment was carried out using CIBSE static and adaptive methods, which revealed that summertime overheating was prevalent across half of the dwellings in the non-heating season of 2022, as compared to 17% overheated dwellings in 2021. Bungalows with upgraded cavity wall insulation and top floor flats facing south and south-west had a propensity to overheat. The variation in indoor temperature and CO2 levels across a small sample also indicated the relationship between overheating and residents' behaviour. Given that the majority of the dwellings were occupied by retired elderly people with low incomes who are vulnerable to heat and cannot afford active forms of cooling, it is vital to deploy passive design measures, such as appropriate shading devices that are suitable for a heating-dominated climate and enhanced ventilation, as part of home energy retrofits. Implementing reversible heat pumps coupled with solar PVs can provide cooling during heatwaves while delivering low-carbon heat in the winter. [ABSTRACT FROM AUTHOR]

To reach net-zero emissions by 2050, buildings in the UK need to replace natural gas boilers with heat pumps and district heating. These technologies are efficient at reduced flow/return temperatures, typically 55/25 °C, while traditional heating systems are designed for 82/71 °C, and an oversized heating system can help this temperature transition. This paper reviews how heating systems have been sized over time in the UK and the degree of oversizing in existing buildings. It also reviews if lessons from other countries can be applied to the UK's building stock. The results show that methods to size a heating system have not changed over time, but the modern level of comfort, the retrofit history of buildings and the use of margin lead to the heating system being generally oversized. It is not possible to identify a specific trend by age, use or archetype. Buildings in Scandinavia have a nascent readiness for low-temperature heat as they can use it for most of the year without retrofit. Limitations come primarily from the faults and malfunctions of such systems. In the UK, it is estimated that 10% of domestic buildings would be ready for a supply temperature of 55 °C during extreme external conditions and more buildings at part-load operation. Lessons from Scandinavia should be considered with caution. The building stock in the UK generally underperforms compared to other EU buildings, with heating systems in the UK operating at higher temperatures and with night set-back; the importance of providing a low-return temperature does not exist in the UK despite being beneficial for condensing boiler operation. Sweden and Denmark started to develop district heating technologies with limitations to supply temperatures some 40 years ago whereas the UK is only just starting to consider similar measures in 2021. Recommendations for policy makers in this context have been drawn from this review in the conclusions. [ABSTRACT FROM AUTHOR]

Apart from numerous technical challenges, the transition towards a carbon-neutral energy supply is greatly hindered by limited economic feasibility of renewable energy sources. This results in their slow and bounded penetration in both commercial and residential sectors that are responsible for over 40% of final energy consumption. This paper aims to demonstrate that combined application of sophisticated planning methodologies at building-level and presents incentive mechanisms for renewables that can result in prosumers, featuring hybrid renewable energy systems (HRES), with economic performance comparable to that of conventional energy systems. The presented research enhances existing planning methodologies by integrating appliance-level demand side management into the decision process and investigates its effect on the planning problem. Moreover, the proposed methodology features an innovative and holistic approach that simultaneously assess electrical and thermal domain in both an isolated and grid-connected context. The analyzed hybrid system consists of solar photovoltaic, wind turbine and battery with thermal supply featuring solar thermal collector and a ground-source heat pump. Overall optimization problem is modeled as a mixed-integer linear program, while ranking of all feasible alternatives is made by the multicriteria decision-making algorithm against several technological, economic, and environmental criteria. A real-life scenario of energy system retrofit for a building in the United Kingdom was employed to demonstrate overall cost savings of 12% in the present market and regulation context. [ABSTRACT FROM AUTHOR]

The decarbonisation of heating in the United Kingdom is likely to entail both the mass adoption of heat pumps and widespread development of district heating infrastructure. Estimation of the spatially disaggregated heat demand is needed for both electrical distribution network with electrified heating and for the development of district heating. The temporal variation of heat demand is important when considering the operation of district heating, thermal energy storage and electrical grid storage. The difference between the national and urban heat demands profiles will vary due to the type and occupancy of buildings leading to temporal variations which have not been widely surveyed. This paper develops a high-resolution spatiotemporal heat load model for Great Britain (GB: England, Scotland a Wales) by identifying the appropriate datasets, archetype segmentation and characterisation for the domestic and nondomestic building stock. This is applied to a thermal model and calibrated on the local scale using gas consumption statistics. The annual GB heat demand was in close agreement with other estimates and the peak demand was 219 GWth. The urban heat demand was found to have a lower peak to trough ratio than the average national demand profile. This will have important implications for the uptake of heating technologies and design of district heating. [ABSTRACT FROM AUTHOR]