Search

This paper focuses on studying the optimization problem of multi-agent systems (MAS) under undirected graph. To reduce the communication frequency among agents, a zero-gradient-sum (ZGS) algorithm based on dynamic event-triggered (DET) mechanism is investigated. The event-triggered condition of each agent only uses its own state information and the neighbor's state information at the previous triggering instants, without requiring continuous state information from the neighbor. In addition, the designed algorithm allows for the sampling period to be arbitrarily large. The Lyapunov method is utilized to derive the sufficient conditions that incorporate time delay and parameters. As the event is only checked at the periodic moment, zeno behavior can be directly excluded. Finally, numerical simulations demonstrate the effectiveness of the theoretical results. [ABSTRACT FROM AUTHOR]

Combinatorial test design is a plan of test that aims to reduce the amount of test cases systematically by choosing a subset of the test cases based on the combination of input variables. The subset covers all possible combinations of a given strength and hence tries to match the effectiveness of the exhaustive set. This mechanism of reduction has been used successfully in software testing research with t-way testing (where t indicates the interaction strength of combinations). Potentially, other systems may exhibit many similarities with this approach. Hence, it could form an emerging application in different areas of research due to its usefulness. To this end, more recently it has been applied in a few research areas successfully. In this paper, we explore the applicability of combinatorial test design technique for Fractional Order (FO), Proportional-Integral-Derivative (PID) parameter design controller, named as FOPID, for an automatic voltage regulator (AVR) system. Throughout the paper, we justify this new application theoretically and practically through simulations. In addition, we report on first experiments indicating its practical use in this field. We design different algorithms and adapted other strategies to cover all the combinations with an optimum and effective test set. Our findings indicate that combinatorial test design can find the combinations that lead to optimum design. Besides this, we also found that by increasing the strength of combination, we can approach to the optimum design in a way that with only 4-way combinatorial set, we can get the effectiveness of an exhaustive test set. This significantly reduced the number of tests needed and thus leads to an approach that optimizes design of parameters quickly. [ABSTRACT FROM AUTHOR]

Orienteering problem (OP) is a routing problem, where the aim is to generate a path through set of nodes, which would maximize total score and would not exceed the budget. In this paper, we present an extension of classic OP—Orienteering Problem with Functional Profits (OPFP), where the score of a specific point depends on its characteristics, position in the route, and other points in the route. For solving OPFP, we developed an open-source framework for solving orienteering problems, which utilizes four core components of OP in its modular architecture. Fully-written in Go programming language our framework can be extended for solving different types of tasks with different algorithms; this was demonstrated by implementation of two popular algorithms for OP solving—Ant Colony Optimization and Recursive Greedy Algorithm. Computational efficiency of the framework was shown through solving four well-known OP types: classic Orienteering Problem (OP), Orienteering Problem with Compulsory Vertices (OPCV), Orienteering Problem with Time Windows (OPTW), and Time Dependent Orienteering Problem (TDOP) along with OPFP. Experiments were conducted on a large multi-source dataset for Saint Petersburg, Russia, containing data from Instagram, TripAdvisor, Foursquare and official touristic website. Our framework is able to construct touristic paths for different OP types within few seconds using dataset with thousands of points of interest. [ABSTRACT FROM AUTHOR]

Coordination is essential for improving supply chain performance, and one of the most critical factors in achieving the coordination of a supply chain is the integrated research of production and distribution. In this paper, a novel two-stage hybrid solution methodology is proposed. In the first stage, products are processed on the serial machines of multiple manufacturers located in two industrial parks. A fuzzy multi-objective scheduling optimization is performed using a modified non-dominated sorting genetic algorithm II (NSGA-II). The result obtained in the first stage is used in the second stage to optimize the distribution scheduling problem using a modified genetic annealing algorithm (GAA). Finally, simulation results verify both the feasibility and efficiency of the proposed solution methodology. [ABSTRACT FROM AUTHOR]

Research: The body composition model is closely related to the physiological characteristics of the human body. At the same time there can be a large number of physiological characteristics, many of which may be redundant or irrelevant. In existing human physiological feature selection algorithms, it is difficult to overcome the impact that redundancy and irrelevancy may have on human body composition modeling. This suggests a role for selection algorithms, where human physiological characteristics are identified using a combination of filtering and improved clustering. To do this, a feature filtering method based on Hilbert-Schmidt dependency criteria is first of all used to eliminate irrelevant features. After this, it is possible to use improved Chameleon clustering to increase the combination of sub-clusters amongst the characteristics, thereby removing any redundant features to obtain a candidate feature set for human body composition modeling. Method We report here on the use of an algorithm to filter the characteristic parameters in INBODY770 (this paper used INBODY 770 as body composition analyzer.) measurement data, which has three commonly-used impedance bands (1 kHZ, 250 kHZ, 500 kHZ). This algorithm is able to filter out parameters that have a low correlation with body composition BFM. The algorithm is also able to draw upon improved clustering techniques to reduce the initial feature set from 29 parameters to 10 parameters for any parameters of the 250 kHZ band that remain after filtering. In addition, we also examined the impact of different sample sizes on feature selection. Result: The proposed algorithm is able to remove irrelevant and redundant features and the resulting correlation between the model and the body composition (BFM which is a whole body fat evaluation can better assess the body's overall fat and muscle composition.) is 0.978, thereby providing an improved model for prediction with a relative error of less than 0.12. [ABSTRACT FROM AUTHOR]

Data mining and search-based algorithms have been applied to various problems due to their power and performance. There have been several studies on the use of these algorithms for refactoring. In this paper, we show how search based algorithms can be used for sequence diagram refactoring. We also show how a hybridized algorithm of Kmeans and Simulated Annealing (SA) algorithms can aid each other in solving sequence diagram refactoring. Results show that search based algorithms can be used successfully in refactoring sequence diagram on small and large case studies. In addition, the hybridized algorithm obtains good results using selected quality metrics. Detailed insights on the experiments on sequence diagram refactoring reveal that the limitations of SA can be addressed by hybridizing the Kmeans algorithm to the SA algorithm. [ABSTRACT FROM AUTHOR]

Identifying influential nodes is an important topic in many diverse applications, such as accelerating information propagation, controlling rumors and diseases. Many methods have been put forward to identify influential nodes in complex networks, ranging from node centrality to diffusion-based processes. However, most of the previous studies do not take into account overlapping communities in networks. In this paper, we propose an effective method based on network representation learning. The method considers not only the overlapping communities in networks, but also the network structure. Experiments on real-world networks show that the proposed method outperforms many benchmark algorithms and can be used in large-scale networks. [ABSTRACT FROM AUTHOR]

Most of real-world image distortions are multiply distortion rather than single distortion. To address this issue, in this paper we propose a quaternion wavelet transform (QWT) based full reference image quality assessment (FR IQA) metric for multiply distorted images, which jointly considers the local similarity of phase and magnitude of each subband via QWT. Firstly, the reference images and distorted images are decomposed by QWT, and then the similarity of amplitude and phase are calculated on each subband, thirdly the IQA metric is constructed by the weighting method considering human visual system (HVS) characteristics, and lastly the scores of each subband are averaged to get the quality score of test image. Experimental results show that the proposed method outperforms the state of art in multiply distorted IQA. [ABSTRACT FROM AUTHOR]

An end-to-end network traffic matrix is significantly helpful for network management and for Software Defined Networks (SDN). However, the end-to-end network traffic matrix's inferences and estimations are a challenging problem. Moreover, attaining the traffic matrix in high-speed networks for SDN is a prohibitive challenge. This paper investigates how to estimate and recover the end-to-end network traffic matrix in fine time granularity from the sampled traffic traces, which is a hard inverse problem. Different from previous methods, the fractal interpolation is used to reconstruct the finer-granularity network traffic. Then, the cubic spline interpolation method is used to obtain the smooth reconstruction values. To attain an accurate the end-to-end network traffic in fine time granularity, we perform a weighted-geometric-average process for two interpolation results that are obtained. The simulation results show that our approaches are feasible and effective. [ABSTRACT FROM AUTHOR]

This work presents optimal linear quadratic regulator (LQR) based on genetic algorithm (GA) to solve the two degrees of freedom (2 DoF) motion control problem in head seas for wave piercing catamarans (WPC). The proposed LQR based GA control strategy is to select optimal weighting matrices (Q and R). The seakeeping performance of WPC based on proposed algorithm is challenged because of multi-input multi-output (MIMO) system of uncertain coefficient problems. Besides the kinematical constraint problems of WPC, the external conditions must be considered, like the sea disturbance and the actuators (a T-foil and two flaps) control. Moreover, this paper describes the MATLAB and LabVIEW software plats to simulate the reduction effects of WPC. Finally, the real-time (RT) NI CompactRIO embedded controller is selected to test the effectiveness of the actuators based on proposed techniques. In conclusion, simulation and experimental results prove the correctness of the proposed algorithm. The percentage of heave and pitch reductions are more than 18% in different high speeds and bad sea conditions. And the results also verify the feasibility of NI CompactRIO embedded controller. [ABSTRACT FROM AUTHOR]

Revocation functionality and hierarchy key delegation are two necessary and crucial requirements to identity-based cryptosystems. Revocable hierarchical identity-based encryption (RHIBE) has attracted a lot of attention in recent years, many RHIBE schemes have been proposed but shown to be either insecure or bounded where they have to fix the maximum hierarchical depth of RHIBE at setup. In this paper, we propose a new unbounded RHIBE scheme with decryption key exposure resilience and with short public system parameters, and prove our RHIBE scheme to be adaptively secure. Our system model is scalable inherently to accommodate more levels of user adaptively with no adding workload or restarting the system. By carefully designing the hybrid games, we overcome the subtle obstacle in applying the dual system encryption methodology for the unbounded and revocable HIBE. To the best of our knowledge, this is the first construction of adaptively secure unbounded RHIBE scheme. [ABSTRACT FROM AUTHOR]

A wide variety of methods have been proposed in protein subnuclear localization to improve the prediction accuracy. However, one important trend of these means is to treat fusion representation by fusing multiple feature representations, of which, the fusion process takes a lot of time. In view of this, this paper novelly proposed a method by combining a new single feature representation and a new algorithm to obtain good recognition rate. Specifically, based on the position-specific scoring matrix (PSSM), we proposed a new expression, correlation position-specific scoring matrix (CoPSSM) as the protein feature representation. Based on the classic nonlinear dimension reduction algorithm, kernel linear discriminant analysis (KLDA), we added a new discriminant criterion and proposed a dichotomous greedy genetic algorithm (DGGA) to intelligently select its kernel bandwidth parameter. Two public datasets with Jackknife test and KNN classifier were used for the numerical experiments. The results showed that the overall success rate (OSR) with single representation CoPSSM is larger than that with many relevant representations. The OSR of the proposed method can reach as high as 87.444% and 90.3361% for these two datasets, respectively, outperforming many current methods. To show the generalization of the proposed algorithm, two extra standard datasets of protein subcellular were chosen to conduct the expending experiment, and the prediction accuracy by Jackknife test and Independent test is still considerable. [ABSTRACT FROM AUTHOR]

With the exploitation of offshore oil and gas gradually moving to deep water, higher temperature differences and pressure differences are applied to the pipeline system, making the global buckling of the pipeline more serious. For unburied deep-water pipelines, the lateral buckling is the major buckling form. The initial imperfections widely exist in the pipeline system due to manufacture defects or the influence of uneven seabed, and the distribution and geometry features of initial imperfections are random. They can be divided into two kinds based on shape: single-arch imperfections and double-arch imperfections. This paper analyzed the global buckling process of a pipeline with 2 initial imperfections by using a numerical simulation method and revealed how the ratio of the initial imperfection’s space length to the imperfection’s wavelength and the combination of imperfections affects the buckling process. The results show that a pipeline with 2 initial imperfections may suffer the superposition of global buckling. The growth ratios of buckling displacement, axial force and bending moment in the superposition zone are several times larger than no buckling superposition pipeline. The ratio of the initial imperfection’s space length to the imperfection’s wavelength decides whether a pipeline suffers buckling superposition. The potential failure point of pipeline exhibiting buckling superposition is as same as the no buckling superposition pipeline, but the failure risk of pipeline exhibiting buckling superposition is much higher. The shape and direction of two nearby imperfections also affects the failure risk of pipeline exhibiting global buckling superposition. The failure risk of pipeline with two double-arch imperfections is higher than pipeline with two single-arch imperfections. [ABSTRACT FROM AUTHOR]

Reactive navigation is a well-known paradigm for controlling an autonomous mobile robot, which suggests making all control decisions through some light processing of the current/recent sensor data. Among the many advantages of this paradigm are: 1) the possibility to apply it to robots with limited and low-priced hardware resources, and 2) the fact of being able to safely navigate a robot in completely unknown environments containing unpredictable moving obstacles. As a major disadvantage, nevertheless, the reactive paradigm may occasionally cause robots to get trapped in certain areas of the environment—typically, these conflicting areas have a large concave shape and/or are full of closely-spaced obstacles. In this last respect, an enormous effort has been devoted to overcome such a serious drawback during the last two decades. As a result of this effort, a substantial number of new approaches for reactive navigation have been put forward. Some of these approaches have clearly improved the way how a reactively-controlled robot can move among densely cluttered obstacles; some other approaches have essentially focused on increasing the variety of obstacle shapes and sizes that could be successfully circumnavigated; etc. In this paper, as a starting point, we choose the best existing reactive approach to move in densely cluttered environments, and we also choose the existing reactive approach with the greatest ability to circumvent large intricate-shaped obstacles. Then, we combine these two approaches in a way that makes the most of them. From the experimental point of view, we use both simulated and real scenarios of challenging complexity for testing purposes. In such scenarios, we demonstrate that the combined approach herein proposed clearly outperforms the two individual approaches on which it is built. [ABSTRACT FROM AUTHOR]

The sampling of scale-free networks in Molecular Biology is usually achieved by growing networks from a seed using recursive algorithms with elementary moves which include the addition and deletion of nodes and bonds. These algorithms include the Barabási-Albert algorithm. Later algorithms, such as the Duplication-Divergence algorithm, the Solé algorithm and the iSite algorithm, were inspired by biological processes underlying the evolution of protein networks, and the networks they produce differ essentially from networks grown by the Barabási-Albert algorithm. In this paper the mean field analysis of these algorithms is reconsidered, and extended to variant and modified implementations of the algorithms. The degree sequences of scale-free networks decay according to a powerlaw distribution, namely P(k) ∼ k− γ, where γ is a scaling exponent. We derive mean field expressions for γ, and test these by numerical simulations. Generally, good agreement is obtained. We also found that some algorithms do not produce scale-free networks (for example some variant Barabási-Albert and Solé networks). [ABSTRACT FROM AUTHOR]

This paper proposes the correction of faulty sensors using a synthesis of the greedy sparse constrained optimization GSCO) technique. The failure of sensors can damage the radiation power pattern in terms of sidelobes and nulls. The synthesis problem can recover the wanted power pattern with reduced number of sensors into the background of greedy algorithm and solved with orthogonal matching pursuit (OMP) technique. Numerical simulation examples of linear arrays are offered to demonstrate the effectiveness of getting the wanted power pattern with a reduced number of antenna sensors which is compared with the available techniques in terms of sidelobes level and number of nulls. [ABSTRACT FROM AUTHOR]

This paper demonstrates a framework of processes for identifying potential witnesses of events from evidence they post to social media. The research defines original evidence models for micro-blog content sources, the relative uncertainty of different evidence types, and models for testing evidence by combination. Methods to filter and extract evidence using automated and semi-automated means are demonstrated using a Twitter case study event. Further, an implementation to test extracted evidence using Dempster Shafer Theory of Evidence are presented. The results indicate that the inclusion of evidence from micro-blog text and linked image content can increase the number of micro-bloggers identified at events, in comparison to the number of micro-bloggers identified from geotags alone. Additionally, the number of micro-bloggers that can be tested for evidence corroboration or conflict, is increased by incorporating evidence identified in their posting history. [ABSTRACT FROM AUTHOR]

Penetration attacks are one of the most serious network security threats. However, existing network defense technologies do not have the ability to entirely block the penetration behavior of intruders. Therefore, the network needs additional defenses. In this paper, a decoy chain deployment (DCD) method based on SDN+NFV is proposed to address this problem. This method considers about the security status of networks, and deploys decoy chains with the resource constraints. DCD changes the attack surface of the network and makes it difficult for intruders to discern the current state of the network. Simulation experiments and analyses show that DCD can effectively resist penetration attacks by increasing the time cost and complexity of a penetration attack. [ABSTRACT FROM AUTHOR]

Based on the traditional Fast Retina Keypoint (FREAK) feature description algorithm, this paper proposed a Gravity-FREAK feature description algorithm based on Micro-electromechanical Systems (MEMS) sensor to overcome the limited computing performance and memory resources of mobile devices and further improve the reality interaction experience of clients through digital information added to the real world by augmented reality technology. The algorithm takes the gravity projection vector corresponding to the feature point as its feature orientation, which saved the time of calculating the neighborhood gray gradient of each feature point, reduced the cost of calculation and improved the accuracy of feature extraction. In the case of registration method of matching and tracking natural features, the adaptive and generic corner detection based on the Gravity-FREAK matching purification algorithm was used to eliminate abnormal matches, and Gravity Kaneda-Lucas Tracking (KLT) algorithm based on MEMS sensor can be used for the tracking registration of the targets and robustness improvement of tracking registration algorithm under mobile environment. [ABSTRACT FROM AUTHOR]

The objective of this paper is to evaluate a panel of statistical algorithms for temporal outbreak detection. Based on a large dataset of simulated weekly surveillance time series, we performed a systematic assessment of 21 statistical algorithms, 19 implemented in the R package and two other methods. We estimated false positive rate (FPR), probability of detection (POD), probability of detection during the first week, sensitivity, specificity, negative and positive predictive values and F1-measure for each detection method. Then, to identify the factors associated with these performance measures, we ran multivariate Poisson regression models adjusted for the characteristics of the simulated time series (trend, seasonality, dispersion, outbreak sizes, etc.). The FPR ranged from 0.7% to 59.9% and the POD from 43.3% to 88.7%. Some methods had a very high specificity, up to 99.4%, but a low sensitivity. Methods with a high sensitivity (up to 79.5%) had a low specificity. All methods had a high negative predictive value, over 94%, while positive predictive values ranged from 6.5% to 68.4%. Multivariate Poisson regression models showed that performance measures were strongly influenced by the characteristics of time series. Past or current outbreak size and duration strongly influenced detection performances. [ABSTRACT FROM AUTHOR]

The use of RFID technology in complex and distributed environments often leads to a multi-domain RFID system, in which trust establishment among entities from heterogeneous domains without past interaction or prior agreed policy, is a challenge. The current trust management mechanisms in the literature do not meet the specific requirements in multi-domain RFID systems. Therefore, this paper analyzes the special challenges on trust management in multi-domain RFID systems, and identifies the implications and the requirements of the challenges on the solutions to the trust management of multi-domain RFID systems. A multi-domain trust management model is proposed, which provides a hierarchical trust management framework include a diversity of trust evaluation and establishment approaches. The simulation results and analysis show that the proposed method has excellent ability to deal with the trust relationships, better security, and higher accuracy rate. [ABSTRACT FROM AUTHOR]

To further improve the fuel economy of series hybrid electric tracked vehicles, a reinforcement learning (RL)-based real-time energy management strategy is developed in this paper. In order to utilize the statistical characteristics of online driving schedule effectively, a recursive algorithm for the transition probability matrix (TPM) of power-request is derived. The reinforcement learning (RL) is applied to calculate and update the control policy at regular time, adapting to the varying driving conditions. A facing-forward powertrain model is built in detail, including the engine-generator model, battery model and vehicle dynamical model. The robustness and adaptability of real-time energy management strategy are validated through the comparison with the stationary control strategy based on initial transition probability matrix (TPM) generated from a long naturalistic driving cycle in the simulation. Results indicate that proposed method has better fuel economy than stationary one and is more effective in real-time control. [ABSTRACT FROM AUTHOR]

In 1979 Haralick famously introduced a method for analyzing the texture of an image: a set of statistics extracted from the co-occurrence matrix. In this paper we investigate novel sets of texture descriptors extracted from the co-occurrence matrix; in addition, we compare and combine different strategies for extending these descriptors. The following approaches are compared: the standard approach proposed by Haralick, two methods that consider the co-occurrence matrix as a three-dimensional shape, a gray-level run-length set of features and the direct use of the co-occurrence matrix projected onto a lower dimensional subspace by principal component analysis. Texture descriptors are extracted from the co-occurrence matrix evaluated at multiple scales. Moreover, the descriptors are extracted not only from the entire co-occurrence matrix but also from subwindows. The resulting texture descriptors are used to train a support vector machine and ensembles. Results show that our novel extraction methods improve the performance of standard methods. We validate our approach across six medical datasets representing different image classification problems using the Wilcoxon signed rank test. The source code used for the approaches tested in this paper will be available at: http://www.dei.unipd.it/wdyn/?IDsezione=3314&IDgruppo_pass=124&preview=. [ABSTRACT FROM AUTHOR]

Network address shuffling is a novel moving target defense (MTD) that invalidates the address information collected by the attacker by dynamically changing or remapping the host’s network addresses. However, most network address shuffling methods are limited by the limited address space and rely on the host’s static domain name to map to its dynamic address; therefore these methods cannot effectively defend against random scanning attacks, and cannot defend against an attacker who knows the target’s domain name. In this paper, we propose a network defense method based on random domain name and address mutation (RDAM), which increases the scanning space of the attacker through a dynamic domain name method and reduces the probability that a host will be hit by an attacker scanning IP addresses using the domain name system (DNS) query list and the time window methods. Theoretical analysis and experimental results show that RDAM can defend against scanning attacks and worm propagation more effectively than general network address shuffling methods, while introducing an acceptable operational overhead. [ABSTRACT FROM AUTHOR]

As the quality of crucial entities can directly affect that of software, their identification and protection become an important premise for effective software development, management, maintenance and testing, which thus contribute to improving the software quality and its attack-defending ability. Most analysis and evaluation on important entities like codes-based static structure analysis are on the destruction of the actual software running. In this paper, from the perspective of software execution process, we proposed an approach to mine dynamic noteworthy functions (DNFM)in software execution sequences. First, according to software decompiling and tracking stack changes, the execution traces composed of a series of function addresses were acquired. Then these traces were modeled as execution sequences and then simplified so as to get simplified sequences (SFS), followed by the extraction of patterns through pattern extraction (PE) algorithm from SFS. After that, evaluating indicators inner-importance and inter-importance were designed to measure the noteworthiness of functions in DNFM algorithm. Finally, these functions were sorted by their noteworthiness. Comparison and contrast were conducted on the experiment results from two traditional complex network-based node mining methods, namely PageRank and DegreeRank. The results show that the DNFM method can mine noteworthy functions in software effectively and precisely. [ABSTRACT FROM AUTHOR]

Color image compression is a commonly used process to represent image data as few bits as possible, which removes redundancy in the data while maintaining an appropriate level of quality for the user. Color image compression algorithms based on quaternion are very common in recent years. In this paper, we propose a color image compression scheme, based on the real SVD, named real compression scheme. First, we form a new real rectangular matrix C according to the red, green and blue components of the original color image and perform the real SVD for C. Then we select several largest singular values and the corresponding vectors in the left and right unitary matrices to compress the color image. We compare the real compression scheme with quaternion compression scheme by performing quaternion SVD using the real structure-preserving algorithm. We compare the two schemes in terms of operation amount, assignment number, operation speed, PSNR and CR. The experimental results show that with the same numbers of selected singular values, the real compression scheme offers higher CR, much less operation time, but a little bit smaller PSNR than the quaternion compression scheme. When these two schemes have the same CR, the real compression scheme shows more prominent advantages both on the operation time and PSNR. [ABSTRACT FROM AUTHOR]

Background: Non-coding RNAs perform a wide range of functions inside the living cells that are related to their structures. Several algorithms have been proposed to predict RNA secondary structure based on minimum free energy. Low prediction accuracy of these algorithms indicates that free energy alone is not sufficient to predict the functional secondary structure. Recently, the obtained information from the SHAPE experiment greatly improves the accuracy of RNA secondary structure prediction by adding this information to the thermodynamic free energy as pseudo-free energy. Method: In this paper, a new method is proposed to predict RNA secondary structure based on both free energy and SHAPE pseudo-free energy. For each RNA sequence, a population of secondary structures is constructed and their SHAPE data are simulated. Then, an evolutionary algorithm is used to improve each structure based on both free and pseudo-free energies. Finally, a structure with minimum summation of free and pseudo-free energies is considered as the predicted RNA secondary structure. Results and Conclusions: Computationally simulating the SHAPE data for a given RNA sequence requires its secondary structure. Here, we overcome this limitation by employing a population of secondary structures. This helps us to simulate the SHAPE data for any RNA sequence and consequently improves the accuracy of RNA secondary structure prediction as it is confirmed by our experiments. The source code and web server of our proposed method are freely available at . [ABSTRACT FROM AUTHOR]

Anonymity, which is more and more important to multi-receiver schemes, has been taken into consideration by many researchers recently. To protect the receiver anonymity, in 2010, the first multi-receiver scheme based on the Lagrange interpolating polynomial was proposed. To ensure the sender’s anonymity, the concept of the ring signature was proposed in 2005, but afterwards, this scheme was proven to has some weakness and at the same time, a completely anonymous multi-receiver signcryption scheme is proposed. In this completely anonymous scheme, the sender anonymity is achieved by improving the ring signature, and the receiver anonymity is achieved by also using the Lagrange interpolating polynomial. Unfortunately, the Lagrange interpolation method was proven a failure to protect the anonymity of receivers, because each authorized receiver could judge whether anyone else is authorized or not. Therefore, the completely anonymous multi-receiver signcryption mentioned above can only protect the sender anonymity. In this paper, we propose a new completely anonymous multi-receiver signcryption scheme with a new polynomial technology used to replace the Lagrange interpolating polynomial, which can mix the identity information of receivers to save it as a ciphertext element and prevent the authorized receivers from verifying others. With the receiver anonymity, the proposed scheme also owns the anonymity of the sender at the same time. Meanwhile, the decryption fairness and public verification are also provided. [ABSTRACT FROM AUTHOR]

Traffic identification of the target category is currently a significant challenge for network monitoring and management. To identify the target category with pertinence, a feature extraction algorithm based on the subset with highest proportion is presented in this paper. The method is proposed to be applied to the identification of any category that is assigned as the target one, but not restricted to certain specific category. We divide the process of feature extraction into two stages. In the stage of primary feature extraction, the feature subset is extracted from the dataset which has the highest proportion of the target category. In the stage of secondary feature extraction, the features that can distinguish the target and interfering categories are added to the feature subset. Our theoretical analysis and experimental observations reveal that the proposed algorithm is able to extract fewer features with greater identification ability of the target category. Moreover, the universality of the proposed algorithm proves to be available with the experiment that every category is set to be the target one. [ABSTRACT FROM AUTHOR]

As one of data mining techniques, outlier detection aims to discover outlying observations that deviate substantially from the reminder of the data. Recently, the Local Outlier Factor (LOF) algorithm has been successfully applied to outlier detection. However, due to the computational complexity of the LOF algorithm, its application to large data with high dimension has been limited. The aim of this paper is to propose grid-based algorithm that reduces the computation time required by the LOF algorithm to determine the k-nearest neighbors. The algorithm divides the data spaces in to a smaller number of regions, called as a “grid”, and calculates the LOF value of each grid. To examine the effectiveness of the proposed method, several experiments incorporating different parameters were conducted. The proposed method demonstrated a significant computation time reduction with predictable and acceptable trade-off errors. Then, the proposed methodology was successfully applied to real database transaction logs of Korea Atomic Energy Research Institute. As a result, we show that for a very large dataset, the grid-LOF can be considered as an acceptable approximation for the original LOF. Moreover, it can also be effectively used for real-time outlier detection. [ABSTRACT FROM AUTHOR]

Due to a set of constant initial values, the performance of conventional TCP drops significantly encountering heterogeneous network, showing low throughput and unfairness. This paper firstly demonstrates the chaotic character of TCP congestion control in heterogeneous network, especially the sensitivity to initial value. Inspired by merit of nature-inspired algorithm, a novel structure of TCP congestion control (IPPM, Internet Prey-Predator Model) is proposed. Parameters such as available link capacity(C), congestion window (W) and queue length (Q) are collected by IPPM, which calculates the max value of C according to the interacting relationship existing in C, W and Q, and IPPM initiates the TCP ssthresh with the calculated value. Plenty of simulation results show that the modified TCP can effectively avoid network congestion and packet loss. Besides, it holds high resource utilization, convergence speeds, fairness and stability. [ABSTRACT FROM AUTHOR]

In the context of multivariate multilevel data analysis, this paper focuses on the multivariate linear mixed-effects model, including all the correlations between the random effects when the dimensional residual terms are assumed uncorrelated. Using the EM algorithm, we suggest more general expressions of the model’s parameters estimators. These estimators can be used in the framework of the multivariate longitudinal data analysis as well as in the more general context of the analysis of multivariate multilevel data. By using a likelihood ratio test, we test the significance of the correlations between the random effects of two dependent variables of the model, in order to investigate whether or not it is useful to model these dependent variables jointly. Simulation studies are done to assess both the parameter recovery performance of the EM estimators and the power of the test. Using two empirical data sets which are of longitudinal multivariate type and multivariate multilevel type, respectively, the usefulness of the test is illustrated. [ABSTRACT FROM AUTHOR]

As a result of the greatly increased use of mobile devices, the disadvantages of portable devices have gradually begun to emerge. To solve these problems, the use of mobile cloud computing assisted by cloud data centers has been proposed. However, cloud data centers are always very far from the mobile requesters. In this paper, we propose an improved multi-objective local mobile cloud model: Compounded Local Mobile Cloud Architecture with Dynamic Priority Queues (LMCpri). This new architecture could briefly store jobs that arrive simultaneously at the cloudlet in different priority positions according to the result of auction processing, and then execute partitioning tasks on capable helpers. In the Scheduling Module, NSGA-II is employed as the scheduling algorithm to shorten processing time and decrease requester cost relative to PSO and sequential scheduling. The simulation results show that the number of iteration times that is defined to 30 is the best choice of the system. In addition, comparing with LMCque, LMCpri is able to effectively accommodate a requester who would like his job to be executed in advance and shorten execution time. Finally, we make a comparing experiment between LMCpri and cloud assisting architecture, and the results reveal that LMCpri presents a better performance advantage than cloud assisting architecture. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to develop an algorithm for hybrid spectral computed tomography (CT) which combines energy-integrating and photon-counting detectors. While the energy-integrating scan is global, the photon-counting scan can have a local field of view (FOV). The algorithm synthesizes both spectral data and energy-integrating data. Low rank and sparsity prior is used for spectral CT reconstruction. An initial estimation is obtained from the projection data based on physical principles of x-ray interaction with the matter, which provides a more accurate Taylor expansion than previous work and can guarantee the convergence of the algorithm. Numerical simulation with clinical CT images are performed. The proposed algorithm produces very good spectral features outside the FOV when no K-edge material exists. Exterior reconstruction of K-edge material can be partially achieved. [ABSTRACT FROM AUTHOR]

If equipped with several radar emitters, a target will produce more than one measurement per time step and is denoted as an extended target. However, due to the requirement of all possible measurement set partitions, the exact probability hypothesis density filter for extended target tracking is computationally intractable. To reduce the computational burden, a fast partitioning algorithm based on hierarchy clustering is proposed in this paper. It combines the two most similar cells to obtain new partitions step by step. The pseudo-likelihoods in the Gaussian-mixture probability hypothesis density filter can then be computed iteratively. Furthermore, considering the additional measurement information from the emitter target, the signal feature is also used in partitioning the measurement set to improve the tracking performance. The simulation results show that the proposed method can perform better with lower computational complexity in scenarios with different clutter densities. [ABSTRACT FROM AUTHOR]

Minimum driver node sets (MDSs) play an important role in studying the structural controllability of complex networks. Recent research has shown that MDSs tend to avoid high-degree nodes. However, this observation is based on the analysis of a small number of MDSs, because enumerating all of the MDSs of a network is a #P problem. Therefore, past research has not been sufficient to arrive at a convincing conclusion. In this paper, first, we propose a preferential matching algorithm to find MDSs that have a specific degree property. Then, we show that the MDSs obtained by preferential matching can be composed of high- and medium-degree nodes. Moreover, the experimental results also show that the average degree of the MDSs of some networks tends to be greater than that of the overall network, even when the MDSs are obtained using previous research method. Further analysis shows that whether the driver nodes tend to be high-degree nodes or not is closely related to the edge direction of the network. [ABSTRACT FROM AUTHOR]

In this paper, a Semantic Web service matchmaker called UltiMatch-NL is presented. UltiMatch-NL applies two filters namely Signature-based and Description-based on different abstraction levels of a service profile to achieve more accurate results. More specifically, the proposed filters rely on semantic knowledge to extract the similarity between a given pair of service descriptions. Thus it is a further step towards fully automated Web service discovery via making this process more semantic-aware. In addition, a new technique is proposed to weight and combine the results of different filters of UltiMatch-NL, automatically. Moreover, an innovative approach is introduced to predict the relevance of requests and Web services and eliminate the need for setting a threshold value of similarity. In order to evaluate UltiMatch-NL, the repository of OWLS-TC is used. The performance evaluation based on standard measures from the information retrieval field shows that semantic matching of OWL-S services can be significantly improved by incorporating designed matching filters. [ABSTRACT FROM AUTHOR]

The automatic detection of bilateral symmetry is a challenging task in computer vision and pattern recognition. This paper presents an approach for the detection of bilateral symmetry in digital single object images. Our method relies on the extraction of Scale Invariant Feature Transform (SIFT) based feature points, which serves as the basis for the ascertainment of the centroid of the object; the latter being the origin under the Cartesian coordinate system to be converted to the polar coordinate system in order to facilitate the selection symmetric coordinate pairs. This is followed by comparing the gradient magnitude and orientation of the corresponding points to evaluate the amount of symmetry exhibited by each pair of points. The experimental results show that our approach draw the symmetry line accurately, provided that the observed centroid point is true. [ABSTRACT FROM AUTHOR]

Web services today are among the most widely used groups for Service Oriented Architecture (SOA). Service selection is one of the most significant current discussions in SOA, which evaluates discovered services and chooses the best candidate from them. Although a majority of service selection techniques apply Quality of Service (QoS), the behaviour of QoS-based service selection leads to service selection problems in Multi-Criteria Decision Making (MCDM). In the existing works, the confidence level of decision makers is neglected and does not consider their expertise in assessing Web services. In this paper, we employ the VIKOR (VIšekriterijumskoKOmpromisnoRangiranje) method, which is absent in the literature for service selection, but is well-known in other research. We propose a QoS-based approach that deals with service selection by applying VIKOR with improvement of features. This research determines the weights of criteria based on user preference and accounts for the confidence level of decision makers. The proposed approach is illustrated by an example in order to demonstrate and validate the model. The results of this research may facilitate service consumers to attain a more efficient decision when selecting the appropriate service. [ABSTRACT FROM AUTHOR]

An increasing number of genes have been experimentally confirmed in recent years as causative genes to various human diseases. The newly available knowledge can be exploited by machine learning methods to discover additional unknown genes that are likely to be associated with diseases. In particular, positive unlabeled learning (PU learning) methods, which require only a positive training set P (confirmed disease genes) and an unlabeled set U (the unknown candidate genes) instead of a negative training set N, have been shown to be effective in uncovering new disease genes in the current scenario. Using only a single source of data for prediction can be susceptible to bias due to incompleteness and noise in the genomic data and a single machine learning predictor prone to bias caused by inherent limitations of individual methods. In this paper, we propose an effective PU learning framework that integrates multiple biological data sources and an ensemble of powerful machine learning classifiers for disease gene identification. Our proposed method integrates data from multiple biological sources for training PU learning classifiers. A novel ensemble-based PU learning method EPU is then used to integrate multiple PU learning classifiers to achieve accurate and robust disease gene predictions. Our evaluation experiments across six disease groups showed that EPU achieved significantly better results compared with various state-of-the-art prediction methods as well as ensemble learning classifiers. Through integrating multiple biological data sources for training and the outputs of an ensemble of PU learning classifiers for prediction, we are able to minimize the potential bias and errors in individual data sources and machine learning algorithms to achieve more accurate and robust disease gene predictions. In the future, our EPU method provides an effective framework to integrate the additional biological and computational resources for better disease gene predictions. [ABSTRACT FROM AUTHOR]

There is great potential to be explored regarding the use of agent-based modelling and simulation as an alternative paradigm to investigate early-stage cancer interactions with the immune system. It does not suffer from some limitations of ordinary differential equation models, such as the lack of stochasticity, representation of individual behaviours rather than aggregates and individual memory. In this paper we investigate the potential contribution of agent-based modelling and simulation when contrasted with stochastic versions of ODE models using early-stage cancer examples. We seek answers to the following questions: (1) Does this new stochastic formulation produce similar results to the agent-based version? (2) Can these methods be used interchangeably? (3) Do agent-based models outcomes reveal any benefit when compared to the Gillespie results? To answer these research questions we investigate three well-established mathematical models describing interactions between tumour cells and immune elements. These case studies were re-conceptualised under an agent-based perspective and also converted to the Gillespie algorithm formulation. Our interest in this work, therefore, is to establish a methodological discussion regarding the usability of different simulation approaches, rather than provide further biological insights into the investigated case studies. Our results show that it is possible to obtain equivalent models that implement the same mechanisms; however, the incapacity of the Gillespie algorithm to retain individual memory of past events affects the similarity of some results. Furthermore, the emergent behaviour of ABMS produces extra patters of behaviour in the system, which was not obtained by the Gillespie algorithm. [ABSTRACT FROM AUTHOR]

In biological systems, the dynamic analysis method has gained increasing attention in the past decade. The Boolean network is the most common model of a genetic regulatory network. The interactions of activation and inhibition in the genetic regulatory network are modeled as a set of functions of the Boolean network, while the state transitions in the Boolean network reflect the dynamic property of a genetic regulatory network. A difficult problem for state transition analysis is the finding of attractors. In this paper, we modeled the genetic regulatory network as a Boolean network and proposed a solving algorithm to tackle the attractor finding problem. In the proposed algorithm, we partitioned the Boolean network into several blocks consisting of the strongly connected components according to their gradients, and defined the connection between blocks as decision node. Based on the solutions calculated on the decision nodes and using a satisfiability solving algorithm, we identified the attractors in the state transition graph of each block. The proposed algorithm is benchmarked on a variety of genetic regulatory networks. Compared with existing algorithms, it achieved similar performance on small test cases, and outperformed it on larger and more complex ones, which happens to be the trend of the modern genetic regulatory network. Furthermore, while the existing satisfiability-based algorithms cannot be parallelized due to their inherent algorithm design, the proposed algorithm exhibits a good scalability on parallel computing architectures. [ABSTRACT FROM AUTHOR]

With the development of medical imaging modalities and image processing algorithms, there arises a need for methods of their comprehensive quantitative evaluation. In particular, this concerns the algorithms for vessel tracking and segmentation in magnetic resonance angiography images. The problem can be approached by using synthetic images, where true geometry of vessels is known. This paper presents a framework for computer modeling of MRA imaging and the results of its validation. A new model incorporates blood flow simulation within MR signal computation kernel. The proposed solution is unique, especially with respect to the interface between flow and image formation processes. Furthermore it utilizes the concept of particle tracing. The particles reflect the flow of fluid they are immersed in and they are assigned magnetization vectors with temporal evolution controlled by MR physics. Such an approach ensures flexibility as the designed simulator is able to reconstruct flow profiles of any type. The proposed model is validated in a series of experiments with physical and digital flow phantoms. The synthesized 3D images contain various features (including artifacts) characteristic for the time-of-flight protocol and exhibit remarkable correlation with the data acquired in a real MR scanner. The obtained results support the primary goal of the conducted research, i.e. establishing a reference technique for a quantified validation of MR angiography image processing algorithms. [ABSTRACT FROM AUTHOR]

In this paper, based on the gravity principle of classical physics, we propose a tunable gravity-based model, which considers tag usage pattern to weigh both the mass and distance of network nodes. We then apply this model in solving the problems of information filtering and network evolving. Experimental results on two real-world data sets, Del.icio.us and MovieLens, show that it can not only enhance the algorithmic performance, but can also better characterize the properties of real networks. This work may shed some light on the in-depth understanding of the effect of gravity model. [ABSTRACT FROM AUTHOR]

The population migration algorithm (PMA) is a simulation of a population of the intelligent algorithm. Given the prematurity and low precision of PMA, this paper introduces a local search mechanism of the leap-frog algorithm and crossover operator to improve the PMA search speed and global convergence properties. The typical test function verifies the improved algorithm through its performance. Compared with the improved population migration and other intelligential algorithms, the result shows that the convergence rate of the improved PMA is very high and its convergence is proved. [ABSTRACT FROM AUTHOR]

The one-sample-per-person problem has become an active research topic for face recognition in recent years because of its challenges and significance for real-world applications. However, achieving relatively higher recognition accuracy is still a difficult problem due to, usually, too few training samples being available and variations of illumination and expression. To alleviate the negative effects caused by these unfavorable factors, in this paper we propose a more accurate spectral feature image-based 2DLDA (two-dimensional linear discriminant analysis) ensemble algorithm for face recognition, with one sample image per person. In our algorithm, multi-resolution spectral feature images are constructed to represent the face images; this can greatly enlarge the training set. The proposed method is inspired by our finding that, among these spectral feature images, features extracted from some orientations and scales using 2DLDA are not sensitive to variations of illumination and expression. In order to maintain the positive characteristics of these filters and to make correct category assignments, the strategy of classifier committee learning (CCL) is designed to combine the results obtained from different spectral feature images. Using the above strategies, the negative effects caused by those unfavorable factors can be alleviated efficiently in face recognition. Experimental results on the standard databases demonstrate the feasibility and efficiency of the proposed method. [ABSTRACT FROM AUTHOR]