Search

The case study presented in this paper is an innovative ground source heat pump (GSHP) system constituted by a hybrid Photovoltaic Thermal (PVT) solar system for poultry houses. Farmers tend to not to apply GSHPs because of the high prices of excavation and time consumption. The innovative heat pump system assessed in this study comprises of a new type of heat exchangers; a thin-tube solar polyethylene heat exchanger installed between roof tiles and PV panels and a novel vertical ground heat exchanger to utilize the heat stored in the soil. The heating system applied to a poultry house are monitored and evaluated under a variety of environmental and operating conditions to achieve annual/long-term efficiency of the heating system in Kirton, UK. The maximum heating demand of the poultry house is determined 34.4 MWh/PC while the minimum is 11,1 MWh/PC. The monitored results show that the heat pump produced 15.02 MWh of thermal energy per annum. Solar PV and heat pump worked very well together with solar PV covering all the heat pump's annual electrical energy requirement and generated 8.74 MWh of extra electricity exported to the grid. The seasonal coefficient of performance is found 3.73 through a year. The novel PVT-GSHP heating system is a very promising solution for high fossil fuel consumption in the agriculture industry and the energy savings of the whole system can be noticeably increased dependent up on the system controlling. [ABSTRACT FROM AUTHOR]

Residential demand response using low carbon technologies can potentially offer energy flexibility to the electricity network along with integration of renewable generation. This paper seeks to empirically evaluate the effectiveness of residential demand response trials on a low voltage feeder of a secondary substation in Barnsley (UK). The study used a sample of 14 well-insulated dwellings equipped with home batteries, heat pumps and solar photovoltaic systems coordinated using automated control. Statistical analysis was undertaken using time-series monitoring data obtained at the individual dwelling level, dwelling sample and at the feeder level of the local low voltage network. Resident experience of the trials was assessed through qualitative data obtained from household telephone surveys. Over three weeks of trials, daily demand response interventions of 2 h duration were applied to the sample of 14 dwellings. For evening peak times, the mean reduction in grid electricity import was found to be 1.3 kWh (67%) per dwelling for turn-down interventions which aimed to minimise import. For turn-up interventions between 1 and 3 pm, the mean increase in grid electricity import was found to be 5.8 kWh (645%) per dwelling. The effect of interventions was measured at the low voltage network level for two single-phase feeders, where penetration of trial homes was approximately one-third. A reduction in mean real power up to 21% was observed for turn-down interventions as well as an increase in real mean power up to 307% for turn-up interventions. In general, the trials had little effect on residents in terms of thermal comfort, hot water availability, noise disturbance or disruption to routines, and where such effects were noticed, they were broadly acceptable. The widespread implementation of residential demand response schemes will require increased roll-out of time-of-use tariffs, enhanced resident support and extensive monitoring of low voltage feeders in electricity substations. [ABSTRACT FROM AUTHOR]

• Over the technologies' typical 20-year lifetime, most UK dwellings have a cost optimum low-carbon heating system using air source heat pumps. • Dwelling properties and spatiotemporal variabilities significantly change the optimum low-carbon technology from blue hydrogen boilers, direct electrical heating, and air source heat pumps, to ground source heat pumps. • Direct electrical heating is economically preferred over heat pumps in lower demand dwellings and with analysis over shorter timescales. • Incentives for low-carbon heating need to target adoption of efficient technologies to reduce the greater increase in network demands. An understanding of heating technologies from the consumers' perspective is critical to ensure low-carbon technologies are adopted for reducing their current associated emissions. Existing studies from the consumers' perspective do not compare and optimise the full range and combinations of potential heating systems. There is also little consideration of how spatiotemporal and dwelling variations combined alter the economic and environmental effectiveness of technologies. The novelty of this paper is the creation and use of a new comprehensive framework to capture the range of heating technologies and their viability for any specific dwelling's traits and climate from customers' perspective which is missing from current studies. The model optimises combinations of prime heaters, energy sources, ancillary solar technologies and sizes, thermal energy storage sizes and tariffs with hourly heating simulation across a year and compares their operation, capital, and lifetime costs alongside emissions to realise the true preferential heating systems for customers, which could be used by various stakeholders. Using the UK as a case study, the results show electrified heating is generally the optimum lifetime cost solution, mainly from air source heat pumps coupled with photovoltaics. However, direct electrical heating becomes more economically viable as dwelling demands reduce from smaller dwellings or warmer climates, as shorter durations of the ownership are considered, or with capital cost constraints from lower income households. Understanding this is of high importance, as without correctly targeted incentives, a larger uptake of direct electrical heating may occur, which will burden the electrical network and generation to a greater extent than more efficient heat pumps. [ABSTRACT FROM AUTHOR]

To reach net-zero emissions by 2050, buildings in the UK need to replace natural gas boilers with heat pumps and district heating. These technologies are efficient at reduced flow/return temperatures, typically 55/25 °C, while traditional heating systems are designed for 82/71 °C, and an oversized heating system can help this temperature transition. This paper reviews how heating systems have been sized over time in the UK and the degree of oversizing in existing buildings. It also reviews if lessons from other countries can be applied to the UK's building stock. The results show that methods to size a heating system have not changed over time, but the modern level of comfort, the retrofit history of buildings and the use of margin lead to the heating system being generally oversized. It is not possible to identify a specific trend by age, use or archetype. Buildings in Scandinavia have a nascent readiness for low-temperature heat as they can use it for most of the year without retrofit. Limitations come primarily from the faults and malfunctions of such systems. In the UK, it is estimated that 10% of domestic buildings would be ready for a supply temperature of 55 °C during extreme external conditions and more buildings at part-load operation. Lessons from Scandinavia should be considered with caution. The building stock in the UK generally underperforms compared to other EU buildings, with heating systems in the UK operating at higher temperatures and with night set-back; the importance of providing a low-return temperature does not exist in the UK despite being beneficial for condensing boiler operation. Sweden and Denmark started to develop district heating technologies with limitations to supply temperatures some 40 years ago whereas the UK is only just starting to consider similar measures in 2021. Recommendations for policy makers in this context have been drawn from this review in the conclusions. [ABSTRACT FROM AUTHOR]