Search

The gig economy and gig work have grown quickly in recent years and have drawn much attention from researchers in different fields. Because the platform mediated gig economy is a relatively new phenomenon, studies have produced a range of interesting findings; of interest here are the socio‐technical issues that this work has surfaced. This systematic literature review (SLR) provides a snapshot of a range of socio‐technical issues raised in the last 12 years of literature focused on the platform mediated gig economy. Based on a sample of 515 papers gathered from nine databases in multiple disciplines, 132 were coded that specifically studied the gig economy, gig work, and gig workers. Three main socio‐technical themes were identified: (1) the digital workplace, which includes information infrastructure and digital labor that are related to the nature of gig work and the user agency; (2) algorithmic management, which includes platform governance, performance management, information asymmetry, power asymmetry, and system manipulation, relying on a diverse set of technological tools including algorithms and big data analytics; (3) ethical design, as a relevant value set that gig workers expect from the platform, which includes trust, fairness, equality, privacy, and transparency. A social informatics perspective is used to rethink the relationship between gig workers and platforms, extract the socio‐technical issues noted in prior research, and discuss the underexplored aspects of the platform mediated gig economy. The results draw attention to understudied yet critically important socio‐technical issues in the gig economy that suggest short‐ and long‐term opportunities for future research directions. [ABSTRACT FROM AUTHOR]

Traditional federated learning faces challenges such as high communication costs, structural heterogeneity,and insufficient privacy protection. To address these issues, this paper proposes a federated learning evolutionary algorithm that applies sparse evolutionary training algorithm to reduce communication costs and integrates local differential privacy protection for participants’ privacy. Additionally, it utilizes the NSGA-Ⅲ algorithm to optimize the network structure and sparsity of the global federated learning model, adjusting the relationship between data availability and privacy protection. This achieves a balance between the effectiveness, communication costs, and privacy of the global federated learning model. Experimental results under unstable communication environments demonstrate that, on the MNIST and CIFAR-10 datasets, compared to the solution with the lowest error rate using the FNSGA-Ⅲ algorithm, the proposed algorithm improves communication efficiency by 57. 19% and 52. 17%, respectively. The participants also achieved（3. 46, 10-4） and（6. 52, 10-4）-local differential privacy. This algorithm can effectively reduce communication costs and protect participant privacy without significantly compromising the accuracy of the global model. [ABSTRACT FROM AUTHOR]

The rapid development of technology has resulted in a surge in the volume of digital data available. This situation creates a problem for users who need assistance in locating specific information within this massive collection of data, resulting in a time-consuming process. Automatic Text Summarization systems have been developed as a more effective solution than traditional summarization techniques to address this problem and improve user access to relevant information. It is well known that researchers in the health sciences find it difficult to keep up with the latest literature due to their busy schedules. This study aims to produce comprehensive abstracts of Turkish-language scientific papers in the field of health sciences. Although abstracts of scientific papers are already available, more thorough summaries are still needed. To the best of our knowledge, no previous attempt has been made to automatically summarize Turkish language health science papers. For this purpose, a dataset of 105 Turkish papers was collected from DergiPark. Term Frequency, Term Frequency-Inverse Document Frequency, Latent Semantic Analysis, TextRank, and Latent Dirichlet Allocation algorithms were chosen as extractive text summarization methods due to their frequent use in this field. The performance of the text summarization models was evaluated using recall, precision, and F-score metrics, and the algorithms gave satisfactory results for Turkish. [ABSTRACT FROM AUTHOR]

This document is a special issue of the journal Algorithms, featuring selected papers from the journal's editorial board members from 2022 and 2023. The issue includes 16 research papers covering a range of topics such as game theory, fault detection in cellular networks, optimization algorithms, machine learning, cryptocurrency trading, and more. Each paper presents its own unique research findings and methodologies. The issue aims to showcase the diverse research interests and expertise of the journal's editorial board members. [Extracted from the article]

There is increasing focus on applying deep learning methods to electrocardiograms (ECGs), with recent studies showing that neural networks (NNs) can predict future heart failure or atrial fibrillation from the ECG alone. However, large numbers of ECGs are needed to train NNs, and many ECGs are currently only in paper format, which are not suitable for NN training. We developed a fully-automated online ECG digitisation tool to convert scanned paper ECGs into digital signals. Using automated horizontal and vertical anchor point detection, the algorithm automatically segments the ECG image into separate images for the 12 leads and a dynamical morphological algorithm is then applied to extract the signal of interest. We then validated the performance of the algorithm on 515 digital ECGs, of which 45 were printed, scanned and redigitised. The automated digitisation tool achieved 99.0% correlation between the digitised signals and the ground truth ECG (n = 515 standard 3-by-4 ECGs) after excluding ECGs with overlap of lead signals. Without exclusion, the performance of average correlation was from 90 to 97% across the leads on all 3-by-4 ECGs. There was a 97% correlation for 12-by-1 and 3-by-1 ECG formats after excluding ECGs with overlap of lead signals. Without exclusion, the average correlation of some leads in 12-by-1 ECGs was 60–70% and the average correlation of 3-by-1 ECGs achieved 80–90%. ECGs that were printed, scanned, and redigitised, our tool achieved 96% correlation with the original signals. We have developed and validated a fully-automated, user-friendly, online ECG digitisation tool. Unlike other available tools, this does not require any manual segmentation of ECG signals. Our tool can facilitate the rapid and automated digitisation of large repositories of paper ECGs to allow them to be used for deep learning projects. [ABSTRACT FROM AUTHOR]

In view of the problems of data sparsity and the diversity in academic paper recom-mender systems,based on CONVNCF, this paper proposed an algorithm of convolution with word and heterogeneous information network for academic paper recommendation ( WN -APR) . Firstly, WN -APR algorithm learned user and paper' s diverse features from different semantics to alleviate the sparsity problem. Then it designed an outer product fusing way to seamlessly combine user features with paper features. Replacing of 2D CNN, this algorithm applied 3 D convolution to mine the influence of different features on the performance. Finally, it modified the BPR loss function to enhance diversity in recommendations. Experimental results on CiteULike-a and CiteULike-t datasets show that WN-APR improves the performance of accuracy and diversity over the baseline models. [ABSTRACT FROM AUTHOR]

The electrocardiogram (ECG) signal describes the heart's electrical activity, allowing it to detect several health conditions, including cardiac system abnormalities and dysfunctions. Nowadays, most patient medical records are still paper-based, especially those made in past decades. The importance of collecting digitized ECGs is twofold: firstly, all medical applications can be easily implemented with an engineering approach if the ECGs are treated as signals; secondly, paper ECGs can deteriorate over time, therefore a correct evaluation of the patient's clinical evolution is not always guaranteed. The goal of this paper is the realization of an automatic conversion algorithm from paper-based ECGs (images) to digital ECG signals. The algorithm involves a digitization process tested on an image set of 16 subjects, also with pathologies. The quantitative analysis of the digitization method is carried out by evaluating the repeatability and reproducibility of the algorithm. The digitization accuracy is evaluated both on the entire signal and on six ECG time parameters (R-R peak distance, QRS complex duration, QT interval, PQ interval, P-wave duration, and heart rate). Results demonstrate the algorithm efficiency has an average Pearson correlation coefficient of 0.94 and measurement errors of the ECG time parameters are always less than 1 mm. Due to the promising experimental results, the algorithm could be embedded into a graphical interface, becoming a measurement and collection tool for cardiologists. [ABSTRACT FROM AUTHOR]

This special issue contains six revised and extended versions of tool papers that appeared in the proceedings of TACAS 2021, the 27th International Conference on Tools and Algorithms for the Construction and Analysis of Systems. The issue is dedicated to the realization of algorithms in tools and the studies of the application of these tools for analysing hard- and software systems. [ABSTRACT FROM AUTHOR]

One of the most widely used measures of scientific impact is the number of citations. However, due to its heavy-tailed distribution, citations are fundamentally difficult to predict but can be improved. This study was aimed at investigating the factors and parts influencing the citation number of a scientific paper in the otology field. Therefore, this work proposes a new solution that utilizes machine learning and natural language processing to process English text and provides a paper citation as the predicted results. Different algorithms are implemented in this solution, such as linear regression, boosted decision tree, decision forest, and neural networks. The application of neural network regression revealed that papers' abstracts have more influence on the citation numbers of otological articles. This new solution has been developed in visual programming using Microsoft Azure machine learning at the back end and Programming Without Coding Technology at the front end. We recommend using machine learning models to improve the abstracts of research articles to get more citations. [ABSTRACT FROM AUTHOR]

Document forgeries that involve modification of the materials used, such as ink and paper, provide evidence of any malpractices being performed. Forensic specialists use different techniques to identify and classify these samples; however, the most preferred method is to use nondestructive techniques to avoid any potential damage to the original specimen under investigation. Hyperspectral imaging has already been explored in several application domains and used as a powerful method in forensic investigations to extract information about the materials under examination. To precisely classify the material information and utilize the hyperspectral imaging technique's potential, we probed the potential of some hybrid spectral similarity measures to classify different commonly used paper samples. A comparison of these methods is quantitatively presented in this article. Hybrid spectral similarity algorithms are tested on forensic analysis of paper data. We compared the classification capabilities of various hybrid spectral similarity algorithms on hyperspectral data of 40 different paper samples. The overall accuracy (OA), kappa K̂, Z‐score of kappa (ZK̂), and the 95% confidence interval of kappa (CI(K̂)) are used for comparison. The SID‐SAM and SID‐SCA produced an overall accuracy of 88% and 87%, respectively, which is highest among the hybrid spectral similarity measures tested. [ABSTRACT FROM AUTHOR]

The traditional method for transformer moisture diagnosis is to establish empirical equations between feature parameters extracted from frequency domain spectroscopy (FDS) and the transformer’s moisture content. However, the established empirical equation may not be applicable to a novel testing environment, resulting in an unreliable evaluation result. In this regard, it is acknowledged that FDS combined with machine learning is more suitable for estimating moisture content in a variety of test environments. Nonetheless, the accuracy of the estimation results obtained using the existing method is limited by the algorithm’s inability to generalize. To address this issue, we propose an AdaBoost algorithm-enhanced back-propagation neural network (BP_AdaBoost). This study creates a database by extracting feature parameters from the FDS that characterize the insulation states of the prepared samples. Then, using the BP_AdaBoost algorithm and the newly constructed database, the moisture estimation models are trained. Finally, the results of the estimation are discussed in terms of laboratory and field transformers. By comparing the proposed BP_AdaBoost algorithm to other intelligence algorithms, it is demonstrated that it not only performs better in generalization, but also maintains a high level of accuracy. [ABSTRACT FROM AUTHOR]

With the exponential growth in the number of academic researchers, it is crucial for editors of scientific journals to identify the highest-quality papers. While several measures exist to evaluate a paper's impact post-publication, the challenge of determining the potential impact of a manuscript during the review process remains an understudied issue. In this paper, we propose a reviewer-reputation ranking algorithm to identify high-quality papers based on paper citations, where a reviewer's reputation is computed from the correlation between their past ratings and the current number of citations received by the papers they have evaluated. During the review process, reviewers with high reputation scores are given more weight to determine the quality of papers. We test the algorithm on an artificial network with 200 reviewers and 600 papers, as well as on the American Physical Society (APS) data set, including in the analysis 308,243 papers and 274,154 mutual citations. We compare our approach with two existing methods, demonstrating that our algorithm significantly outperforms the others in identifying manuscripts with the highest quality. Our findings can help improve the impact of scientific journals, thereby contributing to academic and scientific progress. • We propose an algorithm to identify the papers with the highest quality from a large number of submissions. • We compare our new algorithm with other existing methods of aggregating user ratings in various online services. • We test our algorithm both with an artificial network and with the empirical data of the APS data set. • We show that our algorithm outperforms the other methods in identifying the papers with the highest quality. [ABSTRACT FROM AUTHOR]

They give fixed parameter tractable algorithms for the problem parameterized by various structural parameters. The authors give a greedy loop-free algorithm for the exhaustive generation, a successor algorithm that runs in constant amortized time, among other algorithms, as well as results for the fixed spin generalization of this problem. IWOCA (International Workshop on Combinatorial Algorithms) is an annual conference series covering all aspects of combinatorial algorithms. [Extracted from the article]

The authors offer observation on utilizing tables, figures, charts and graphs to help understand the research presented in a simple manner but also engage and sustain the reader's interest. Topics discussed include benefits provided by the use of tables/figures/charts/graphs, general methodology of design and submission, and copyright issues of using material from government publications/public domain.

The paper presents a technique for determining the time index of growth of the slope of reverse voltage for double insulated cables, based on the body of the theory of series. It is proved that in the vicinity of the extremum point (maximum) the function of the reverse voltage is approximated by polynomials of the nth power. It is proposed to use second-degree polynomials for practical calculations. The method for calculating relevant indicators is illustrated using real data. Analysis of deviations made it possible to conclude that the calculation method proposed in the paper is far more accurate. In the final part of the study, it was concluded that there is a promising outlook for further development of methodological guidelines for determining complex indices of the remaining life of the cable, including but not limited to the use of various mathematical methods. [ABSTRACT FROM AUTHOR]

We study the quadratic cycle cover problem (QCCP), which aims to find a node-disjoint cycle cover in a directed graph with minimum interaction cost between successive arcs. We derive several semidefinite programming (SDP) relaxations and use facial reduction to make these strictly feasible. We investigate a nontrivial relationship between the transformation matrix used in the reduction and the structure of the graph, which is exploited in an efficient algorithm that constructs this matrix for any instance of the problem. To solve our relaxations, we propose an algorithm that incorporates an augmented Lagrangian method into a cutting-plane framework by utilizing Dykstra's projection algorithm. Our algorithm is suitable for solving SDP relaxations with a large number of cutting-planes. Computational results show that our SDP bounds and efficient cutting-plane algorithm outperform other QCCP bounding approaches from the literature. Finally, we provide several SDP-based upper bounding techniques, among which is a sequential Q-learning method that exploits a solution of our SDP relaxation within a reinforcement learning environment. Summary of Contribution: The quadratic cycle cover problem (QCCP) is the problem of finding a set of node-disjoint cycles covering all the nodes in a graph such that the total interaction cost between successive arcs is minimized. The QCCP has applications in many fields, among which are robotics, transportation, energy distribution networks, and automatic inspection. Besides this, the problem has a high theoretical relevance because of its close connection to the quadratic traveling salesman problem (QTSP). The QTSP has several applications, for example, in bioinformatics, and is considered to be among the most difficult combinatorial optimization problems nowadays. After removing the subtour elimination constraints, the QTSP boils down to the QCCP. Hence, an in-depth study of the QCCP also contributes to the construction of strong bounds for the QTSP. In this paper, we study the application of semidefinite programming (SDP) to obtain strong bounds for the QCCP. Our strongest SDP relaxation is very hard to solve by any SDP solver because of the large number of involved cutting-planes. Because of that, we propose a new approach in which an augmented Lagrangian method is incorporated into a cutting-plane framework by utilizing Dykstra's projection algorithm. We emphasize an efficient implementation of the method and perform an extensive computational study. This study shows that our method is able to handle a large number of cuts and that the resulting bounds are currently the best QCCP bounds in the literature. We also introduce several upper bounding techniques, among which is a distributed reinforcement learning algorithm that exploits our SDP relaxations. [ABSTRACT FROM AUTHOR]

In this paper, we propose a novel paper currency defect detection algorithm using quaternion uniform strength. We first build paper currency image preprocessing integration framework which includes intensity balancing, paper currency location, and geometric correction. We then propose a global–local paper currency image registration algorithm by moving key areas within certain range which can eliminate the false difference effectively. Finally, the quaternion uniform strength is calculated by using quaternion convolution edge detector. The defect degree of paper currency is determined by using the quaternion uniform color difference. The proposed algorithm is tested using different datasets from five countries: CNY, USD, EUR, VND, and RUB. The experimental results demonstrate that the proposed algorithm yields better results than the existing state-of-the-art paper currency defect detection techniques. The demo of the proposed paper currency defect detection algorithm will be publicly available. [ABSTRACT FROM AUTHOR]

This work describes the log-MAP (BCJR) algorithm implementation of a close to capacity dirty paper coding CODEC. The CODEC consists of eight deep pipeline processors. It decodes blocks of 975 bits in 26.9 ms using less than 9.7% of low-cost FPGA (and no DSP blocks). Two pipelines, for alpha and beta, calculate the values of gamma (of the BCJR) to reduce the storage requirements. The final log-likelihood ratio (LLR) is calculated together with alpha, reusing intermediate results. The number of bits used by the different signals of the processor is easily configurable. It was set to six bits to the channel measure signals and eight bits to log of probability signals like alpha, beta, and others. The CODEC clock was 100 MHz. The achieved bit rate is 36.2 Kbps per CODEC, but multiple CODECs can be fit into a single chip. The CODEC is 3.49 dB from the channel capacity. [ABSTRACT FROM AUTHOR]

Although it was claimed that the MKR-α method can improve the overshoot and nonlinear stability characteristics of the KR-α method, it seems that it still has a high frequency overshoot in steady-state responses and a weak instability. Three examples are applied to numerically illustrate the two adverse properties. A loading-correction term is introduced into the displacement difference equation to remove the adverse overshoot in high frequency steady-state responses. Besides, it is analytically verified that the MKR-α method has an adverse weak instability. Although the problem of high frequency overshoot in steady-state responses can be overcome, there is no way to eliminate the adverse weak instability for both the KR-α method and MKR-α method. Thus, the applications of the two families of integration methods are very limited. It is demonstrated that a high frequency numerical damping is incapable of mitigating the overshoot caused by a weak instability. [ABSTRACT FROM AUTHOR]

The teleprompter, invented in 1948 as a memory aid for show business, has become a ubiquitous technology in modern politics. Yet, the hidden ways in which this device shapes our understanding of performance, newscasting, and political rhetoric are rarely studied by media scholars. Recognizing this lacuna, this article traces the evolution of the teleprompter from a cumbersome, human-operated device to an invisible system of screens designed to conceal its own existence. The teleprompter has not only shaped the standardization of speech, but also restructured the televised spectacle by collapsing the sonic, the tactile, and the optical. By focusing on teleprompter fiascos and moments of breakdown from President Eisenhower to President Trump, we make a broader argument regarding the importance of failure and the accidental to the study of visual culture. [ABSTRACT FROM AUTHOR]

Machine learning (ML), a form of artificial intelligence (AI), is being increasingly employed in neurology. Reported performance metrics often match or exceed the efficiency of average clinicians. The neurologist is easily baffled by the underlying concepts and terminologies associated with ML studies. The superlative performance metrics of ML algorithms often hide the opaque nature of its inner workings. Questions regarding ML model's interpretability and reproducibility of its results in real-world scenarios, need emphasis. Given an abundance of time and information, the expert clinician should be able to deliver comparable predictions to ML models, a useful benchmark while evaluating its performance. Predictive performance metrics of ML models should not be confused with causal inference between its input and output. ML and clinical gestalt should compete in a randomized controlled trial before they can complement each other for screening, triaging, providing second opinions and modifying treatment. [ABSTRACT FROM AUTHOR]

In order to solve the problems of the current art circulation information is not transparent and the centralized trading authority is asymmetric, this paper proposed a art blockchain certificate traceability model based on three chains. First, in view of the large amount of data in a single piece of artwork information, this paper proposed a blockchain-based symmetric searchable encryption algorithm, and used the interplanetary file system to securely store artwork circulation records on-chain and off-chain. Secondly, for the characteristics of the increasing effective data of artwork information, this paper proposed a blockchain-based inverted fast query and traceability algorithm to help data users realize fast traceability and positioning. At the same time, this paper proposed for the first time that the false information alliance chain stores false art circulation records to realize the processing of false information. Finally, experiments verify the feasibility of the model for big data security storage and fast query traceability. Experiments show that the model is feasible and the query method is efficient. [ABSTRACT FROM AUTHOR]

Zemblys et al. (Behavior Research Methods, 51(2), 840–864, 2019) reported on a method for the classification of eye-movements ("gazeNet"). I have found three errors and two problems with that paper that are explained herein. Error 1: The gazeNet classification method was built assuming that a hand-scored dataset from Lund University was all collected at 500 Hz, but in fact, six of the 34 recording files were actually collected at 200 Hz. Of the six datasets that were used as the training set for the gazeNet algorithm, two were actually collected at 200 Hz. Problem 1 has to do with the fact that even among the 500 Hz data, the inter-timestamp intervals varied widely. Problem 2 is that there are many unusual discontinuities in the saccade trajectories from the Lund University dataset that make it a very poor choice for the construction of an automatic classification method. Error 2 The gazeNet algorithm was trained on the Lund dataset, and then compared to other methods, not trained on this dataset, in terms of performance on this dataset. This is an inherently unfair comparison, and yet nowhere in the gazeNet paper is this unfairness mentioned. Error 3 arises out of the novel event-related agreement analysis employed by the gazeNet authors. Although the authors intended to classify unmatched events as either false positives or false negatives, many are actually being classified as true negatives. True negatives are not errors, and any unmatched event misclassified as a true negative is actually driving kappa higher, whereas unmatched events should be driving kappa lower. [ABSTRACT FROM AUTHOR]

The folded paper-size illusion is as easy to demonstrate as it is powerful in generating insights into perceptual processing: First take two A4 sheets of paper, one original sized, another halved by folding, then compare them in terms of area size by centering the halved sheet on the center of the original one! We perceive the larger sheet as far less than double (i.e., 100%) the size of the small one, typically only being about two thirds larger--this illusion is preserved by rotating the inner sheet and even by aligning it to one or two sides, but is dissolved by aligning both sheets to three sides, here documented by 88 participants' data. A potential explanation might be the general incapability of accurately comparing more than one geometrical dimension at once--in everyday life, we solve this perceptual-cognitive bottleneck by reducing the complexity of such a task via aligning parts with same lengths. [ABSTRACT FROM AUTHOR]

Within the context of fewest-switch surface hopping (FSSH) dynamics, one often wishes to remove the angular component of the derivative coupling between states J and K . In a previous set of papers, Shu et al. [J. Phys. Chem. Lett. 11, 1135–1140 (2020)] posited one approach for such a removal based on direct projection, while we isolated a second approach by constructing and differentiating a rotationally invariant basis. Unfortunately, neither approach was able to demonstrate a one-electron operator O ̂ whose matrix element J O ̂ K was the angular component of the derivative coupling. Here, we show that a one-electron operator can, in fact, be constructed efficiently in a semi-local fashion. The present results yield physical insight into designing new surface hopping algorithms and are of immediate use for FSSH calculations. [ABSTRACT FROM AUTHOR]

The paper presents a technique for determining the time index of growth of the slope of reverse voltage for double insulated cables, based on the body of the theory of series. It is proved that in the vicinity of the extremum point (maximum) the function of the reverse voltage is approximated by polynomials of the nth power. It is proposed to use second-degree polynomials for practical calculations. The method for calculating relevant indicators is illustrated using real data. Analysis of deviations made it possible to conclude that the calculation method proposed in the paper is far more accurate. In the final part of the study, it was concluded that there is a promising outlook for further development of methodological guidelines for determining complex indices of the remaining life of the cable, including but not limited to the use of various mathematical methods. [ABSTRACT FROM AUTHOR]

The application of big data, radiomics, machine learning, and artificial intelligence (AI) algorithms in radiology requires access to large data sets containing personal health information. Because machine learning projects often require collaboration between different sites or data transfer to a third party, precautions are required to safeguard patient privacy. Safety measures are required to prevent inadvertent access to and transfer of identifiable information. The Canadian Association of Radiologists (CAR) is the national voice of radiology committed to promoting the highest standards in patient-centered imaging, lifelong learning, and research. The CAR has created an AI Ethical and Legal standing committee with the mandate to guide the medical imaging community in terms of best practices in data management, access to health care data, de-identification, and accountability practices. Part 2 of this article will inform CAR members on the practical aspects of medical imaging de-identification, strengths and limitations of de-identification approaches, list of de-identification software and tools available, and perspectives on future directions. [ABSTRACT FROM AUTHOR]

The present paper is in two folds. In the first fold, we prove the Lipschitz continuity of the proximal mapping associated with a general strongly H-monotone mapping and compute an estimate of its Lipschitz constant under some mild assumptions imposed on the mapping H involved in the proximal mapping. We provide two examples to show that a maximal monotone mapping need not be a general H-monotone for a single-valued mapping H from a Banach space to its dual space. A class of multi-valued nonlinear variational inclusion problems is considered, and by using the notion of proximal mapping and Nadler's technique, an iterative algorithm with mixed errors is suggested to compute its solutions. Under some appropriate hypotheses imposed on the mappings and parameters involved in the multi-valued nonlinear variational inclusion problem, the strong convergence of the sequences generated by the proposed algorithm to a solution of the aforesaid problem is verified. The second fold of this paper investigates and analyzes the notion of Cn-monotone mappings defined and studied in [S.Z. Nazemi, A new class of monotone mappings and a new class of variational inclusions in Banach spaces, J. Optim. Theory Appl. 155(3)(2012) 785-795]. Several comments related to the results and algorithm appeared in the above mentioned paper are given. [ABSTRACT FROM AUTHOR]

Heritage visualizations are works of the cultural imaginary and this paper examines the artwork Artistic License: VR Sydney Cove circa 1800, which foregrounds the interpretive nature of heritage visualization. It is a reimagining in VR of A View of Sydney Cove, New South Wales, 1804, a contemporaneous print of Sydney Cove. Existing in the liminal space between accuracy and authenticity it is both art object and heritage visualization. The dual nature of this work supports engagement with wider audiences, fostering and broadening debate at individual, institutional, academic and societal levels about the nature and role of heritage. [ABSTRACT FROM AUTHOR]

In view of the problem of fuzziness of rating and tag in traditional collaborative filtering algorithms,this paper used trapezoidal fuzzy number to describe the mapping relationship between rating and satisfaction.The algorithm considered the impact of sparseness of the rating,constructed a new trapezoidal fuzzy rating model to determine the similarity based on fuzzy rating,analyzed the degree of membership between the tag and the item,and constructed a fuzzy item-tag matrix to measure the similarity based on the degree of tag membership.Finally,it used the improved scoring prediction strategy to estimate the score.The experimental results on the MovieLens dataset show that the proposed algorithm improves the prediction accuracy while suppressing the cold start of the project,alleviating the problems of fuzziness and sparseness,which indicates the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

The estimation of time‐lapse time shifts between two, or several, repeated seismic surveys has become increasingly popular over the past eighteen years. These time shifts are a reliable and informative seismic attribute that can relate to reservoir production. Correction for these time shifts or the underlying velocity perturbations and/or subsurface displacement in an imaging sense also permits accurate evaluation of time‐lapse amplitudes by attempting to decouple the kinematic component. To date, there are approximately thirty methods for time‐shift estimation described in the literature. We can group these methods into three main families of mathematical development, together with several miscellaneous techniques. Here we detail the underlying bases for these methods, and the acknowledged benefits and weaknesses of each class of method highlighted. We illustrate this review with a number of time‐lapse seismic examples from producing fields. No method is necessarily superior to the others, as its selection depends on ease of implementation, noise characteristics of the field data, and whether the inherent assumptions suit the case in question. However, cross‐correlation stands out as the algorithm of choice based on the Pareto principle and waveform inversion the algorithm delivering best resolution. This is a companion study to the previous review of time‐shift magnitudes and a discussion of their rock physics basis. [ABSTRACT FROM AUTHOR]

In order to better solve the problem of automatic identification of quality control line and detection line in the detection of gold standard test strip, this paper proposes to collect the image information of gold standard test strip after color rendering through CMOS sensor, preprocess the obtained information, transform RGB image into gray image, build cloud model in the CIELAB/HSV/HSL space, and apply the improved AdaBoost algorithm to determine the position of detection line and quality control line Place. Compared with the traditional template matching method, it improves the accuracy and accuracy of recognition. [ABSTRACT FROM AUTHOR]

This paper proposed an electronic voting scheme based on one-time ring signature and blockchain to solve the problems of the current e-voting system in terms of anonymity, transparency and open vote-counting. This paper introduced one-time ring signature, blockchain and stealth address technology. The one-time ring signature technology solved the problem of voter anonymity, repeated voting and public verification. The blockchain technology could ensure the openness and transparency of the e-voting system. The one-time ring signature technology could ensure no one or institution could obtain the voting intermediate result before the voting ends. In order to improve the efficiency of vote-counting,it used the method of key sharing to improve the vote-counting algorithm. Through security and performance analysis, the scheme conforms to the basic security standards of an electronic voting system. [ABSTRACT FROM AUTHOR]

In this paper we present the Markovian Multiagent Monte-Carlo Second Order Self-Consistent Field Algorithm (M3-SOSCF). This algorithm provides a highly reliable methodology for converging SCF calculations in single-reference methods using a modified differential evolution approach. Additionally, M3 is embarrassingly parallel and modular in regards to Newton–Raphson subroutines. We show that M3 is able to surpass contemporary SOSCFs in reliability, which is illustrated by a benchmark employing poor initial guesses and a second benchmark with SCF calculations which face difficulties using standard SCF algorithms. Furthermore, we analyse inherent properties of M3 and show that in addition to its robustness and efficiency, it is more user-friendly than current SOSCFs. [ABSTRACT FROM AUTHOR]

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. [ABSTRACT FROM AUTHOR]

The digital trunking system has the characteristics that the calling mode is mainly group calling and the communication mode is mostly half duplex. For the problem that the traditional user classification method couldn't meet the classification requirements of digital cluster users, this paper proposed a digital cluster user classification method based on improved RFM model. Firstly, it introduced the average speech duration attribute to establish the recency vitality speak (RVS) model. Then, it used the analytic hierarchy process to determine the weight of each parameter in the model. Finally, it used the K-means + + clustering algorithm to classify digital cluster users. The simulation result shows that, by using the user classification method proposed in this paper, the accuracy of digital cluster user classification can reach more than 87. 9% . [ABSTRACT FROM AUTHOR]

In this paper two procedures are developed for the identification of the parameters contained in an orthotropic elastic-plastic-hardening model for free standing foils, particularly of paper and paperboard. The experimental data considered are provided by cruciform tests and digital image correlation. A simplified version of the constitutive model proposed by Xia et al. (Int J Solids Struct 39:4053-4071, ) is adopted. The inverse analysis is comparatively performed by the following alternative computational methodologies: (a) mathematical programming by a trust-region algorithm; (b) proper orthogonal decomposition and artificial neural network. The second procedure rests on preparatory once-for-all computations and turns out to be applicable economically and routinely in industrial environments. [ABSTRACT FROM AUTHOR]

This paper examines the work practices involved in making data legible to machines and machine output legible to humans. The study is based on ethnographic research of a team of art experts at DNArt – a data classification system that features a growing database of art images, a classification scheme, a similarity matching algorithm, and a website that together serve as a consumer judgment device in an emerging online market for art. I analyze interactions from meeting observations, interviews, documentation, and online interaction data to show how non-technical art experts explain and repair sociotechnical breakdowns – when their expectations for similarity between art images and artists differ from the similarity relations produced by the algorithm. By repairing breakdowns, the art experts construct the algorithm anew, as a legitimate revealer of similarity in art. In doing so, the team's repair work is folded back into the black box of the algorithm, rendering it invisible and unacknowledged, sometimes even by the experts themselves. [ABSTRACT FROM AUTHOR]

This paper presents a novel real-time kinematic simulation algorithm for planar N-bar linkage mechanisms, both single- and multi-degrees-of-freedom, comprising revolute and/or prismatic joints and actuators. A key feature of this algorithm is a reinterpretation technique that transforms prismatic elements into a combination of revolute joint and links. This gives rise to a unified system of geometric constraints and a general-purpose solver which adapts to the complexity of the mechanism. The solver requires only two types of methods--fast dyadic decomposition and relatively slower optimization-based--to simulate all types of planar mechanisms. From an implementation point of view, this algorithm simplifies programming without requiring handling of different types of mechanisms. This versatile algorithm can handle serial, parallel, and hybrid planar mechanisms with varying degrees-of-freedom and joint types. Additionally, this paper presents an estimation of simulation time and structural complexity, shedding light on computational demands. Demonstrative examples showcase the practicality of this method. [ABSTRACT FROM AUTHOR]

We have recently witnessed the rapid development of several emerging technologies, including the internet of things, which lead to a high interest in wireless sensor networks. Tiny sensor nodes are now important parts of a large number of complex systems, with numerous applications, including military, environment monitoring, and surveillance and body area sensor networks. A wireless sensor network builds the core part for IoT. Besides this, lifetime maximization is the biggest challenge in the wireless sensor network. Also, In a wireless sensor network, it is difficult to find an optimal node deployment approach that would minimize costs, be robust to node failures, decrease computing overhead and communication, and maintain a high degree of coverage and network connectivity. There is numerous literature addressed this challenge which is discussed in this paper; still there are lot many challenges yet to be addressed. Considering this scenario, in this paper, we propose a scheduled-based node deployment algorithm using Firefly Optimization (FA) to offer a circumstance where we have a group of target points that satisfy p-coverage and sensor nodes that satisfy q-connectivity, with subject to the selection of the optimal number of a sensor node that has the highest energy and minimum distance. The multiple parameters as no. of sensor nodes, distance, survivability factors, coverage, and connectivity of the sensor nodes are considered for designing the fitness function. A comprehensive statistical analysis is done using the simulation results to prove the proposed scheme's efficiency with other existing state-of-the-art methods under various p-coverage and q-connectivity configurations. [ABSTRACT FROM AUTHOR]

Recently, many image encryption algorithms have been proposed. Part of them failed to pass the cryptanalysis test and were found to be unsecure. Some others were more secure and could resist the known cryptanalysis methods. Many of those recent schemes followed a well-known model that consists of encrypting the image's pixels using a variety of techniques and methods. Many algorithms were claimed to be secure and performant to be used in real applications. This paper investigates this claim by performing a comparative analysis between a chaotic algorithm recently proposed and the standard general purpose AES cryptosystem in a web application context. The experimental tests conducted on both algorithms in this paper proved that the pixel-wise algorithms are not suitable for this kind of applications. [ABSTRACT FROM AUTHOR]

A charge and discharge management scheme is proposed. The stored electric energy in distributed storage devices will converge to the consistent. The consistency of the stored electric energy of the devices helps to maintain the maximum load capacity and maximum consumption capacity of distributed storage devices. The charging and discharging process is constructed as a time-varying optimization problem, and the proposed algorithm can respond to the time-varying parameters of the distributed storage devices in real time. The time-varying neurodynamic algorithms can obtain time-varying optimal solution trajectories to give the optimal charging and discharging strategy in real time. In addition, the proposed approach in this paper focuses on the privacy protection of device data. Each device can calculate the power of discharging or charging by communicating with the partially connected nodes. Numerical simulations of the proposed scheme in the paper are given to verify the effectiveness of the scheme. Numerical simulations show that our scheme can make the electric energy stored in each storage device converge and maintain the maximum load capacity or maximum consumption capacity of the whole distributed storage device. [ABSTRACT FROM AUTHOR]

In response to the numerous challenges faced by traditional human pose recognition methods in practical applications, such as dense targets, severe edge occlusion, limited application scenarios, complex backgrounds, and poor recognition accuracy when targets are occluded, this paper proposes a YOLO-Pose algorithm for human pose estimation. The specific improvements are divided into four parts. Firstly, in the Backbone section of the YOLO-Pose model, lightweight GhostNet modules are introduced to reduce the model's parameter count and computational requirements, making it suitable for deployment on unmanned aerial vehicles (UAVs). Secondly, the ACmix attention mechanism is integrated into the Neck section to improve detection speed during object judgment and localization. Furthermore, in the Head section, key points are optimized using coordinate attention mechanisms, significantly enhancing key point localization accuracy. Lastly, the paper improves the loss function and confidence function to enhance the model's robustness. Experimental results demonstrate that the improved model achieves a 95.58% improvement in mAP50 and a 69.54% improvement in mAP50-95 compared to the original model, with a reduction of 14.6 M parameters. The model achieves a detection speed of 19.9 ms per image, optimized by 30% and 39.5% compared to the original model. Comparisons with other algorithms such as Faster R-CNN, SSD, YOLOv4, and YOLOv7 demonstrate varying degrees of performance improvement. [ABSTRACT FROM AUTHOR]

Communication security has become particularly crucial with the rapid development of the Internet of Things (IoT). Frequency hopping spread spectrum (FHSS) technology, a prevalent method in wireless communication, has a wide range of applications in the Internet of Things. Enhancing the security of frequency hopping sequences is an essential means to improve the security of frequency hopping communication in the Internet of Things, as the performance of frequency hopping sequences plays a crucial role in frequency hopping systems. This paper proposes constructing secure adaptive frequency hopping sequence sets based on the advanced encryption standard (AES) algorithm. As a block cipher algorithm with superior security, the AES algorithm can provide a fundamental guarantee for the security of the proposed frequency hopping sequences. The mapping methods from ciphertext sequences to frequency hopping sequences proposed in this paper can achieve the construction of frequency hopping sequences of any frequency set size to meet the requirements of adaptive frequency hopping. In addition, we also model and analyse the problem of overlapping spectrum band of the IoT groups in the industrial, scientific, and medical (ISM) band, aiming to achieve better packet transmission performance by adjusting the frequency set size. [ABSTRACT FROM AUTHOR]

Objective. The percutaneous puncture lung mass biopsy procedure, which relies on preoperative CT (Computed Tomography) images, is considered the gold standard for determining the benign or malignant nature of lung masses. However, the traditional lung puncture procedure has several issues, including long operation times, a high probability of complications, and high exposure to CT radiation for the patient, as it relies heavily on the surgeon's clinical experience. Approach. To address these problems, a multi-constrained objective optimization model based on clinical criteria for the percutaneous puncture lung mass biopsy procedure has been proposed. Additionally, based on fuzzy optimization, a multidimensional spatial Pareto front algorithm has been developed for optimal path selection. The algorithm finds optimal paths, which are displayed on 3D images, and provides reference points for clinicians' surgical path planning. Main results. To evaluate the algorithm's performance, 25 data sets collected from the Second People's Hospital of Zigong were used for prospective and retrospective experiments. The results demonstrate that 92% of the optimal paths generated by the algorithm meet the clinicians' surgical needs. Significance. The algorithm proposed in this paper is innovative in the selection of mass target point, the integration of constraints based on clinical standards, and the utilization of multi-objective optimization algorithm. Comparison experiments have validated the better performance of the proposed algorithm. From a clinical standpoint, the algorithm proposed in this paper has a higher clinical feasibility of the proposed pathway than related studies, which reduces the dependency of the physician's expertise and clinical experience on pathway planning during the percutaneous puncture lung mass biopsy procedure. [ABSTRACT FROM AUTHOR]