Search

Salp swarm algorithm (SSA) is a swarm intelligence algorithm inspired by the swarm behavior of salps in oceans. In this paper, a adaptive multi-group salp swarm algorithm (AMSSA) with three new communication strategies is presented. Adaptive multi-group mechanism is to evenly divide the initial population into several subgroups, and then exchange information among subgroups after each adaptive iteration. Communication strategy is also an important part of adaptive multi-group mechanism. This paper proposes three new communication strategies and focuses on promoting the performance of SSA. These measures significantly improve the cooperative ability of SSA, accelerate convergence speed, and avoid easily falling into local optimum. And the benchmark functions confirm that AMSSA is better than the original SSA in exploration and exploitation. In addition, AMSSA is combined with prediction of wind power based on back propagation (AMSSA-BP) neural network. The simulation results show that the AMSSA-BP neural network prediction model can achieve a better prediction effect of wind power. [ABSTRACT FROM AUTHOR]

A novel vertical handover algorithm based on multi-attribute and neural network for heterogeneous integrated network is proposed in this paper. The whole frame of the algorithm is constructed by setting the network environment in which we use the network resources by switching between UMTS, GPRS, WLAN, 4G, and 5G. Each network build their own three-layer BP (Back Propagation, BP) neural network model and then the maximum transmission rate, minimum delay, SINR (signal to interference and noise ratio, SINR), bit error rate, user moving speed, and packet loss rate which can affect the overall performance of the wireless network are employed as reference objects to participate in the setting of BP neural network input layer neurons and the training and learning process of subsequent neural network data. Finally, the network download rate is adopted as prediction target to evaluate performance on the five wireless networks and then the vertical handover algorithm will select the right wireless network to perform vertical handover decision. The simulation results on MATLAB platform show that the vertical handover algorithm designed in this paper has a handover success rate up to 90% and realizes efficient handover and seamless connectivity between multi-heterogeneous networks. [ABSTRACT FROM AUTHOR]

The utilization of back-propagation neural network in identification of internal dynamics of chaotic motion is found appropriate. However, during its training through Rumelhart algorithm, it is found that, a high learning rate (α) leads to rapid learning but the weights may oscillate, while a lower value of 'α' leads to slower learning process in weight updating formula Δvjk = αδjxi Momentum factor (μ) is to accelerate the convergence of error during the training in the equation wjk(t+1) = wjk(t) + αδkzj + μ{wjk(t) - wjk(t - 1)} vjk(t+1) = vjk(t) + αδkz + μ{vjk(t) - vjk(t-1) while transfer function sigmoid f(x) = 1/1+e-δx+n. It is the most complicated and experimental task to identify optimum value of 'α' and 'μ' during the training. To identiαy optimum value of 'α' and 'μ', firstly the network is trained with 10³ epochs under different values of 'α' in the close interval 0 < α <1 and μ = 1. At α = 0.3the convergence of initial weights and minimization of error (i.e., mean square error) process is found appropriate. Afterwards to find optimum value of μ, the network was trained again with α = 0.3 (fixed) and with different values of μ in the close interval 0 <μ < 1 for 10³ epochs. It was observed that the convergence of initial weights and minimization of error was appropriate with α = 0.3 and μ = 0.9. On this optimum value of α and μ the network was trained successfully from local minima of error = 1.67029292416874E-03 at 10³ epochs to global minima of error = 4.99180426869658E-04 at 15 105 epochs. At the global minima, the network has exhibited excellent performance in identification of internal dynamics of chaotic motion and in prediction of future values by past recorded data series. These essentials are presented through this research paper. [ABSTRACT FROM AUTHOR]

To improve the accuracy of learning result, in practice multiple parties may collaborate through conducting joint Back-Propagation neural network learning on the union of their respective data sets. During this process no party wants to disclose her/his private data to others. Existing schemes supporting this kind of collaborative learning are either limited in the way of data partition or just consider two parties. There lacks a solution that allows two or more parties, each with an arbitrarily partitioned data set, to collaboratively conduct the learning. This paper solves this open problem by utilizing the power of cloud computing. In our proposed scheme, each party encrypts his/her private data locally and uploads the ciphertexts into the cloud. The cloud then executes most of the operations pertaining to the learning algorithms over ciphertexts without knowing the original private data. By securely offloading the expensive operations to the cloud, we keep the computation and communication costs on each party minimal and independent to the number of participants. To support flexible operations over ciphertexts, we adopt and tailor the BGN "doubly homomorphic" encryption algorithm for the multiparty setting. Numerical analysis and experiments on commodity cloud show that our scheme is secure, efficient, and accurate. [ABSTRACT FROM AUTHOR]

This paper presents an application of artificial neural network for the classification of single channel EMG signal in the context of hand motion detection. Seven statistical input features that are extracted from the preprocessed single channel EMG signals recorded for four predefined hand motions have been used for neural network classifier. Different structures of neural network, based on the number of hidden neurons and two prominent training algorithms, have been considered in the research to find out their applicability for EMG signal classification. The classification performances are analyzed for different architectures of neural network by considering the number of input features, number of hidden neurons, learning algorithms, correlation between network outputs and targets, and mean square error. Between the Levenberg-Marquardt and scaled conjugate gradient learning algorithms, the aforesaid algorithm shows better classification performance. The outcomes of the research show that the optimal design of Levenberg-Marquardt based neural network classifier can perform well with an average classification success rate of 88.4%. A comparison of results has also been presented to validate the effectiveness of the designed neural network classifier to discriminate EMG signals. [ABSTRACT FROM AUTHOR]

In this paper, the method of the graphical interpretation of the single-layer network weights is introduced. It is shown that the network parameters can be converted to the image and their particular elements are the pixels. For this purpose, weight-to-pixel conversion formula is used. Moreover, new weights' modification method is proposed. The weight coefficients are computed on the basis of pixel values for which image filtration algorithms are implemented. The approach is applied to the weights of three types of the models: single-layer network, two-layer backpropagation network and the hybrid network. The performance of the models is then compared on two independent data sets. By means of the experiments, it is presented that the adjustment of the weights to new values decreases test error value compared to the error obtained for initial set of weights. [ABSTRACT FROM AUTHOR]

Abstract: In mammography diagnosis systems, high False Negative Rate (FNR) has always been a significant problem since a false negative answer may lead to a patient''s death. This paper is directed towards the development of a novel Computer-aided Diagnosis (CADx) system for the diagnosis of breast masses. It aims at intensifying the performance of CADx algorithms as well as reducing the FNR by utilizing Zernike moments as descriptors of shape and margin characteristics. The input Regions of Interest (ROIs) are segmented manually and further subjected to a number of preprocessing stages. The outcomes of preprocessing stage are two processed images containing co-scaled translated masses. Besides, one of these images represents the shape characteristics of the mass, while the other describes the margin characteristics. Two groups of Zernike moments have been extracted from the preprocessed images and applied to the feature selection stage. Each group includes 32 moments with different orders and iterations. Considering the performance of the overall CADx system, the most effective moments have been chosen and applied to a Multi-layer Perceptron (MLP) classifier, employing both generic Back Propagation (BP) and Opposition-based Learning (OBL) algorithms. The Receiver Operational Characteristics (ROC) curve and the performance of resulting CADx systems are analyzed for each group of features. The designed systems yield Az=0.976, representing fair sensitivity, and Az=0.975 demonstrating fair specificity. The best achieved FNR and FPR are 0.0% and 5.5%, respectively. [Copyright &y& Elsevier]

In this paper, a neural network is trained and validated using a low end and inexpensive microcontroller. The well-known backpropagation algorithm is implemented to train a neural network model. Both the training and the validation parts are shown through an alphanumeric liquid crystal display. A chemical process was chosen as a realistic nonlinear system to demonstrate the feasibility, and the performance of the results found using the microcontroller. A comparison was made between the microcontroller and the computer results. [ABSTRACT FROM AUTHOR]

Abstract: In this paper, the convergence of a new back-propagation algorithm with adaptive momentum is analyzed when it is used for training feedforward neural networks with a hidden layer. A convergence theorem is presented and sufficient conditions are offered to guarantee both weak and strong convergence result. Compared with existing results, our convergence result is of deterministic nature and we do not require the error function to be quadratic or uniformly convex. [ABSTRACT FROM AUTHOR]

Abstract: The attenuation of extremely low-frequency magnetic fields is important in reducing electromagnetic interference on electric and electronic equipment. In this paper, an innovative method is presented for shielded magnetic field level estimation at power frequencies by a neural network (NN) technique which uses experimental data. The utilized NN is applied to cylindrical shields (transformer-grade iron, copper, and aluminum) in various shield arrangements. Using the developed NN model, the mitigated magnetic field of multilayered shields is measured and evaluated to predict the magnetic field at any distance apart from the magnetic source. The NN, which is based on a feed-forward neural network (FNN), is trained with scaled conjugate gradient, gradient descent with momentum and adaptive learning back propagation, and Levenberg–Marquardt algorithms to compute the shielded magnetic field. Results have shown that the developed FNN trained with the Levenberg–Marquardt algorithm is better than the other training algorithms in predicting the shielded magnetic field value accurately even in the presence of various shield arrangements. [Copyright &y& Elsevier]

In the paper, a method of precision motion control for permanent magnet linear motors is proposed. Unlike rotational motors, permanent magnetic linear motors are more sensitive to various force disturbances because of the reduction of gears. So, as a feedback compensator, a disturbance observer is used to compensate the force disturbances based on the disturbance model. But the force disturbances of permanent magnetic linear motors cannot be fully compensated owing to the error of dynamic model, inaccurately detected velocity and acceleration, especially when a permanent magnetic linear motor runs in low speed. Further analysis shows that the force ripple is the main force disturbance when the velocity of a PMLM is close to zero, and the disturbance model denotes that the force ripple is position dependent. In order to further suppress the force disturbances of permanent magnetic linear motors a feedforward neural network using the BP algorithm is proposed to approximate and compensate the force ripple. The experimental results show that the force ripple is efficiently alleviated and the high positioning precision can be achieved by using the proposed precision motion control method. [ABSTRACT FROM AUTHOR]