Search

This paper presents the effects of installing variable current-limit reactors (CLRs) and adjusting load tap changers (LTCs) on the performance of a commercial wind farm in Taiwan using computer simulations. The companion paper (Part I) demonstrates the field-measured results, simulation model, and simulation results of the studied Jang-Bin wind farm with 23 2-MW doubly fed induction generator-type wind turbine generators connected to the utility system through a 23/161-kV 60-MVA step-up main transformer (MT) from six feeders. Six CLRs, which were originally designed to limit short-circuit currents under faulted conditions, are connected in series with the six feeders. The LTCs of the MT are used to adjust/regulate the secondary-side voltage at the 23-kV bus. Some simulated steady-state and transient results of the studied wind farm with variable values of the proposed CLRs and LTCs are analyzed and compared. [ABSTRACT FROM PUBLISHER]

The subject of this paper is to construct a current-transformer (CT) model based on the Jiles-Atherton (J-A) theory of ferromagnetic hysteresis using transient analysis of control systems (TACS) functions within the Electromagnetic Transients Program (EMTP) in a closed-loop manner. The J-A theory of ferromagnetic hysteresis is presented by the nonlinear first-order ordinary differential equations and inclusive of five parameters that can be found by measurements of hysteresis characteristic. We can use TACS functions within EMTP to describe the J-A theory of ferromagnetic hysteresis. The powerful advantage of this way is the interaction between the electrical network and TACS in EMTP. Compared with the CT model based on the type 96 nonlinear hysteresis inductor, the simulated result of the CT model based on the J-A theory of ferromagnetic hysteresis is almost the same in steady-state situations, but apparently different in a fault transient situation. The analysis and simulation of the actual measured fault profiles in the Taiwan power system is an example of the validation of this proposed model. Therefore, this proposed CT model based on the J-A theory of ferromagnetic hysteresis has the analysis capability of the transient response. The flexibility of TACS makes the simulation of any other situation easier and is another advantage. [ABSTRACT FROM AUTHOR]