Search

The study of pore characteristics is of great importance in reservoir evaluation, especially in deeply buried sandstone. It controls the storage mechanism and reservoir fluid properties of the permeable horizons. The first member of Eocene Shahejie Formation (Es1) sandstone is classified as feldspathic litharenite and lithic arkose. The present research investigates the pore characteristics and reservoir features of the deeply buried sandstone reservoir of Es1 member of Shahejie Formation. The techniques including thin-section petrography, mercury injection capillary pressure (MICP), scanning electron microscopy and laser scanning confocal microscope images were used to demarcate the pores including primary intergranular pores and secondary intergranular, intragranular, dissolution and fracture pores. Mercury injection test and routine core analysis were led to demarcate the pore network characteristics of the studied reservoir. Pore size and pore throat size distribution are acquired from mercury injection test. Porosity values range from 0.5% to 30%, and permeability ranges 0.006–7000 mD. Pore radii of coarse-grained sandstone and fine-grained sandstone range from 0.2 to > 4 µm and 1 nm to 1.60 µm, respectively, by MICP analysis. The mineral composition also plays an important role in protecting the pores with pressure from failure. Fractured sandstone and coarse-grained sandstone consist of large and interconnected pores that enhance the reservoir porosity and permeability, whereas fine-grained sandstone and siltstone consist of numerous pores but not well interconnected, and so they consist of high porosity with low permeability. [ABSTRACT FROM AUTHOR]

Facies identification is a fundamental issue on evaluation and prediction for siliciclastic sediments. The purpose of this paper is to identify sedimentary-diagenetic facies and investigate the influence of sedimentary-diagenetic facies on reservoir quality in coarse-grained deposits from the Eocene Es4 interval, Dongying Depression, Bohai Bay Basin. Based on detailed core observation, thin section petrography combined with conventional wireline logs and core measurement analysis, 12 types of sedimentary- diagenetic facies were divided according to their lithofacies, diagenetic products and related contributions to reservoir quality. The identification and spatial distribution of these sedimentary-diagenetic facies can be determined based on the Bayes discriminant analysis and related cross-plot analysis. The variations of porosity and permeability with burial depth were precisely determined with ±2% for porosity and ±1 × 10–3 μm2 for permeability. The spatial distribution of reservoir porosity and permeability can be predicted quantitatively: high zones of porosity and permeability mainly distributed in the central sections of thick-bedded sandbody, ranging from 6% to greater than 12% for reservoir porosity and from 1 × 10–3 μm2 to greater than 6 × 10–3 μm2; relatively low zones of porosity (less than 6%) and permeability (less than 1 × 10–3 μm2) mainly occur in the bottom and the margin of the thick-bedded sandbody. [ABSTRACT FROM AUTHOR]