Search

Electromyography (EMG) signals have been used to recognize various actions of hand movements, finger movements, and hand gestures. This paper aims to improve the classification accuracy of EMG signals while decreasing the number of features using the tree-seed algorithm. The dataset containing EMG signals utilized in this investigation is derived from a publicly accessible source. The rationale for selecting the tree-seed algorithm centers on its ability to enhance classification accuracy while minimizing the dimensionality of feature sets. The object function and treeseed algorithm’s nature avoids the results to have low accuracy with fewer features. The aim is not just to use a smaller number of features but also to achieve a higher accuracy rate. To ensure that selecting a smaller number of features does not decrease classification accuracy, the performance of all feature subsets was evaluated using the objective function. As a result, the number of selected features decreased, while the accuracy rate increased. The best accuracy improvement was observed, with the rate rising from 84.78% to 90.21% using the k-nearest neighbor (kNN) classifier with 50 out of 80 features. The maximum classification accuracy achieved was 99.75%, also using the kNN classifier. In this study, two different feature sets were compared using two different optimization algorithms in conjunction with four traditional machine learning algorithms to evaluate changes in classification accuracy. The classification accuracy and the improvements in accuracy, along with the number of selected features at the end of the iterations, have been reported. [ABSTRACT FROM AUTHOR]

Machine Learning and Data Mining algorithms are used extensively to enhance the performance of Intrusion Detection Systems. The number of training instances and the dimensionality of data are crucial factors affecting the performance of the model built during the training of any supervised learning algorithms. A sufficient proportion of instances having relevant features from all classes of attacks and normal traffic are considered most desirable while building the classification model that classifies the network traffic into attack and normal. This paper proposes a methodology to improve the accuracy of the model by giving importance to the relevant features that can contribute to model building. The feature selection using correlation‐based and information gain‐based techniques during training and testing contributes much to the detection of stealthier attacks and minority attacks. Then the features of the less detected attacks are identified as the second phase of the filter that is used to improve the performance. The relevant features of stealthy attacks are identified based on the correlation of corresponding features of the attack and normal data as the attacks are made stealthy mostly by making it resemble the normal traffic. Finally, the attacks that are rarely found in the training data are oversampled to improve their detection. CICIDS 2017 data set is employed as it comprises stealthier attacks generated using modern tools. NSL KDD data set is also used for evaluation to compare the proposed work with existing literature as it is used in most of the available literature. The results show superior performance with an accuracy of 99.8%, false positive rate of 0.2%, and a detection rate and 99.8%. [ABSTRACT FROM AUTHOR]

Background: Cancer diagnosis based on machine learning has become a popular application direction. Support vector machine (SVM), as a classical machine learning algorithm, has been widely used in cancer diagnosis because of its advantages in high-dimensional and small sample data. However, due to the high-dimensional feature space and high feature redundancy of gene expression data, SVM faces the problem of poor classification effect when dealing with such data. Methods: Based on this, this paper proposes a hybrid feature selection algorithm combining information gain and grouping particle swarm optimization (IG-GPSO). The algorithm firstly calculates the information gain values of the features and ranks them in descending order according to the value. Then, ranked features are grouped according to the information index, so that the features in the group are close, and the features outside the group are sparse. Finally, grouped features are searched using grouping PSO and evaluated according to in-group and out-group. Results: Experimental results show that the average accuracy (ACC) of the SVM on the feature subset selected by the IG-GPSO is 98.50%, which is significantly better than the traditional feature selection algorithm. Compared with KNN, the classification effect of the feature subset selected by the IG-GPSO is still optimal. In addition, the results of multiple comparison tests show that the feature selection effect of the IG-GPSO is significantly better than that of traditional feature selection algorithms. Conclusion: The feature subset selected by IG-GPSO not only has the best classification effect, but also has the least feature scale (FS). More importantly, the IG-GPSO significantly improves the ACC of SVM in cancer diagnostic. [ABSTRACT FROM AUTHOR]

For the feature selection of network intrusion detection, the issue of numerous redundant features arises, posing challenges in enhancing detection accuracy and adversely affecting overall performance to some extent. Artificial rabbits optimization (ARO) is capable of reducing redundant features and can be applied for the feature selection of network intrusion detection. The ARO exhibits a slow iteration speed in the exploration phase of the population and is prone to an iterative stagnation condition in the exploitation phase, which hinders its ability to deliver outstanding performance in the aforementioned problems. First, to enhance the global exploration capabilities further, the thinking of ARO incorporates the mud ring feeding strategy from the bottlenose dolphin optimizer (BDO). Simultaneously, for adjusting the exploration and exploitation phases, the ARO employs an adaptive switching mechanism. Second, to avoid the original algorithm getting trapped in the local optimum during the local exploitation phase, the levy flight strategy is adopted. Lastly, the dynamic lens-imaging strategy is introduced to enhance population variety and facilitate escape from the local optimum. Then, this paper proposes a modified ARO, namely LBARO, a hybrid algorithm that combines BDO and ARO, for feature selection in the network intrusion detection model. The LBARO is first empirically evaluated to comprehensively demonstrate the superiority of the proposed algorithm, using 8 benchmark test functions and 4 UCI datasets. Subsequently, the LBARO is integrated into the feature selection process of the network intrusion detection model for classification experimental validation. This integration is validated utilizing the NSL-KDD, UNSW NB-15, and InSDN datasets, respectively. Experimental results indicate that the proposed model based on LBARO successfully reduces redundant characteristics while enhancing the classification capabilities of network intrusion detection. [ABSTRACT FROM AUTHOR]

The salp swarm algorithm (SSA) is a well-known optimization algorithm that is increasingly being utilized to solve many sorts of optimization problems. However, SSA may converge to sub-optimal solutions when it is applied to discrete problems such as the feature selection (FS) problem. This paper presents the enhanced opposition-based learning salp swarm algorithm (EOSSA), which is an improved SSA algorithm for solving the FS problem in intrusion detection systems (IDS). EOSSA incorporates four improvements into the original SSA algorithm. Firstly, the opposition-based learning (OBL) method is used in the initialization step of SSA to boost its population diversity. Secondly, the Elite opposition-based learning (EOBL) is used in the improvement loop of SSA to improve its exploration ability. Third, a variable neighborhood search (VNS) method is used in the improvement loop of SSA to improve its exploration mechanism to improve the local search space. Lastly, the Sigmoid binary transform function is used to convert the continuous candidate solutions produced by SSA into discrete binary solutions. EOSSA was evaluated against eighteen popular optimization algorithms (e.g., improved salp swarm algorithm based on opposition-based learning (ISSA), SSA, particle swarm algorithm (PSO), cuckoo search (CS), bat algorithm (BA), and Harris Hawk Optimization (HHO)) using eleven popular intrusion detection datasets (CICIDS2017, CSE-CIC-IDS2018, CICDDOS2019, CIRA-CIC-DoH, Intrusion detection 2018, UNSW-NB15, NSL-KDD, Phishing Legitimate, Malmem2022, IoT, and LUFlow Network) to Detect IoT Botnet Attacks. Moreover, EOSSA was compared with four machine learning algorithms (Decision Tree (DT), logistic regression (LR), Naive Bayes (NB), and K-Nearest Neighborhood (KNN)). The overall simulation results suggested that the proposed method is superior to the other algorithms in terms of the accuracy and number of selected features. The statistical analysis of the simulation results using the Friedman and Wilcoxon signed-rank test confirms the superiority of the proposed method. [ABSTRACT FROM AUTHOR]

In the era of healthcare and its related research fields, the dimensionality problem of high-dimensional data is a massive challenge as it is crucial to identify significant genes while conducting research on diseases like cancer. As a result, studying new Machine Learning (ML) techniques for raw gene expression biomedical data is an important field of research. Disease detection, sample classification, and early disease prediction are all important analyses of high-dimensional biomedical data in the field of bioinformatics. Recently, machine-learning techniques have dramatically improved the analysis of high-dimension biomedical data sets. Nonetheless, researchers' studies on biomedical data faced the challenge of vast dimensions, i.e., the vast features (genes) with a very low sample space. In this paper, two-dimensionality reduction methods, feature selection, and feature extraction are introduced with a systematic comparison of several dimension reduction techniques for the analysis of high-dimensional gene expression biomedical data. We presented a systematic review of some of the most popular nature-inspired algorithms and analyzed them. The paper is mainly focused on the original principles behind each of the algorithms and their applications for cancer classification and prediction from gene expression data. Lastly, the advantages and disadvantages of nature-inspired algorithms for biomedical data are evaluated. This review paper may guide researchers to choose the most effective algorithm for cancer classification and prediction for the satisfactory analysis of high-dimensional biomedical data. [ABSTRACT FROM AUTHOR]

The Internet of Things (IoT) and network-enabled smart devices are crucial to the digitally interconnected society of the present day. However, the increased reliance on IoT devices increases their susceptibility to malicious activities within network traffic, posing significant challenges to cybersecurity. As a result, both system administrators and end users are negatively affected by these malevolent behaviours. Intrusion-detection systems (IDSs) are commonly deployed as a cyber attack defence mechanism to mitigate such risks. IDS plays a crucial role in identifying and preventing cyber hazards within IoT networks. However, the development of an efficient and rapid IDS system for the detection of cyber attacks remains a challenging area of research. Moreover, IDS datasets contain multiple features, so the implementation of feature selection (FS) is required to design an effective and timely IDS. The FS procedure seeks to eliminate irrelevant and redundant features from large IDS datasets, thereby improving the intrusion-detection system's overall performance. In this paper, we propose a hybrid wrapper-based feature-selection algorithm that is based on the concepts of the Cellular Automata (CA) engine and Tabu Search (TS)-based aspiration criteria. We used a Random Forest (RF) ensemble learning classifier to evaluate the fitness of the selected features. The proposed algorithm, CAT-S, was tested on the TON_IoT dataset. The simulation results demonstrate that the proposed algorithm, CAT-S, enhances classification accuracy while simultaneously reducing the number of features and the false positive rate. [ABSTRACT FROM AUTHOR]

Relevant attribute selection in machine learning is a key aspect aimed at simplifying the problem, reducing its dimensionality, and consequently accelerating computation. This paper proposes new algorithms for selecting relevant features and evaluating and selecting a subset of relevant objects in a dataset. Both algorithms are mainly based on the use of a fuzzy approach. The research presented here yielded preliminary results of a new approach to the problem of selecting relevant attributes and objects and selecting appropriate ranges of their values. Detailed results obtained on the Sonar dataset show the positive effects of this approach. Moreover, the observed results may suggest the effectiveness of the proposed method in terms of identifying a subset of truly relevant attributes from among those identified by traditional feature selection methods. [ABSTRACT FROM AUTHOR]

This paper proposes a novel network anomaly detection framework based on data balance and feature selection. Different from the previous binary classification of network intrusion, the network anomaly detection strategy proposed in this paper solves the problem of multiple classification of network intrusion. Regarding the common data imbalance of a network intrusion detection set, a resampling strategy generated by random sampling and Borderline SMOTE data is developed for data balance. According to the features of the intrusion detection dataset, feature selection is carried out based on information gain rate. Experiments are carried out on three basic machine learning algorithms (K-nearest neighbor algorithm (KNN), decision tree (DT), random forest (RF)), and the optimal feature selection scheme is obtained. [ABSTRACT FROM AUTHOR]

Intrusion detection systems (IDS) play a crucial role in securing networks and identifying malicious activity. This is a critical problem in cyber security. In recent years, metaheuristic optimization algorithms and deep learning techniques have been applied to IDS to improve their accuracy and efficiency. Generally, optimization algorithms can be used to boost the performance of IDS models. Deep learning methods, such as convolutional neural networks, have also been used to improve the ability of IDS to detect and classify intrusions. In this paper, we propose a new IDS model based on the combination of deep learning and optimization methods. First, a feature extraction method based on CNNs is developed. Then, a new feature selection method is used based on a modified version of Growth Optimizer (GO), called MGO. We use the Whale Optimization Algorithm (WOA) to boost the search process of the GO. Extensive evaluation and comparisons have been conducted to assess the quality of the suggested method using public datasets of cloud and Internet of Things (IoT) environments. The applied techniques have shown promising results in identifying previously unknown attacks with high accuracy rates. The MGO performed better than several previous methods in all experimental comparisons. [ABSTRACT FROM AUTHOR]

The efficiency and the effectiveness of a machine learning (ML) model are greatly influenced by feature selection (FS), a crucial preprocessing step in machine learning that seeks out the ideal set of characteristics with the maximum accuracy possible. Due to their dominance over traditional optimization techniques, researchers are concentrating on a variety of metaheuristic (or evolutionary) algorithms and trying to suggest cutting-edge hybrid techniques to handle FS issues. The use of hybrid metaheuristic approaches for FS has thus been the subject of numerous research works. The purpose of this paper is to critically assess the existing hybrid FS approaches and to give a thorough literature review on the hybridization of different metaheuristic/evolutionary strategies that have been employed for supporting FS. This article reviews pertinent documents on hybrid frameworks that were published in the period from 2009 to 2022 and offers a thorough analysis of the used techniques, classifiers, datasets, applications, assessment metrics, and schemes of hybridization. Additionally, new open research issues and challenges are identified to pinpoint the areas that have to be further explored for additional study. [ABSTRACT FROM AUTHOR]

Chronic kidney disease is a global health issue that affects millions of people worldwide and causes significant social, economic, and medical issues. Several automated detection systems can diagnose chronic kidney disease. This paper proposes the recursive random forest feature selection (RFFS) based ensemble learning algorithm to diagnose chronic kidney diseases (CKD). In the decision point, decision tree‐based classifiers are used. The accuracy and kappa scores are used to determine the classification results. According to the results of the proposed algorithm's performance analyses, the ensemble learning classifiers outperform other classifiers for classifying CKD. The proposed RFFS algorithm achieves 6%–40% improved prediction accuracy using the feature selection algorithm. Further, it attains 15%–39% of reduced mean square error. The performance metrics, precision, sensitivity, specificity, f1 score, and Jaccard scores, have been analysed and show greater results for the RFFS algorithm. Thus, the proposed RFE‐GB algorithm results prove it as a prominent model for CKD estimation and treatment. [ABSTRACT FROM AUTHOR]

This paper proposes a new, novel ranking method called Inverse-Reinforcement Learning Ranking. The main goal is to find a reward function representing the user's perceived utility after clicking on each result. It is necessary to utilize log information of all users' queries in the search engine dataset to reach this goal while assuming that the decisions (clicks) of the users are the best (optimal policy). The respective reward function is constructed using features extracted through a feature selection, and their corresponding weights are obtained by two optimization models, which are applicable for ranking results represented to the new users. In addition, new performance criteria were developed to illustrate the performance of the presented ranking method. To evaluate and test the proposed ranking algorithm, a real medium-sized dataset from a search engine is preprocessed and used in this research. Findings show promising results and decisive superiority over the default ranking method. It is illustrated that clicks on the top five results, top ten, and even the first results are remarkably improved by about 13–19% in all experiments, and the perplexity remarkably decreases by almost 23% after applying the ranking method. [ABSTRACT FROM AUTHOR]

This paper is devoted to the problem of class imbalance in machine learning, focusing on the intrusion detection of rare classes in computer networks. The problem of class imbalance occurs when one class heavily outnumbers examples from the other classes. In this paper, we are particularly interested in classifiers, as pattern recognition and anomaly detection could be solved as a classification problem. As still a major part of data network traffic of any organization network is benign, and malignant traffic is rare, researchers therefore have to deal with a class imbalance problem. Substantial research has been undertaken in order to identify these methods or data features that allow to accurately identify these attacks. But the usual tactic to deal with the imbalance class problem is to label all malignant traffic as one class and then solve the binary classification problem. In this paper, however, we choose not to group or to drop rare classes but instead investigate what could be done in order to achieve good multi-class classification efficiency. Rare class records were up-sampled using SMOTE method (Chawla et al., 2002) to a preset ratio targets. Experiments with the 3 network traffic datasets, namely CIC-IDS2017, CSE-CIC-IDS2018 (Sharafaldin et al., 2018) and LITNET-2020 (Damasevicius et al., 2020) were performed aiming to achieve reliable recognition of rare malignant classes available in these datasets. Popular machine learning algorithms were chosen for comparison of their readiness to support rare class detection. Related algorithm hyper parameters were tuned within a wide range of values, different data feature selection methods were used and tests were executed with and without over-sampling to test the multiple class problem classification performance of rare classes. Machine learning algorithms ranking based on Precision, Balanced Accuracy Score, G ¯ , and prediction error Bias and Variance decomposition, show that decision tree ensembles (Adaboost, Random Forest Trees and Gradient Boosting Classifier) performed best on the network intrusion datasets used in this research. [ABSTRACT FROM AUTHOR]

Text classification is the critical content of machine learning, and it is widely applied in information filtering, sentimental analysis, and text review. It is very important to improve the accuracy of classification results, and this is also the main research purpose of researchers in this field in recent years. Feature selection plays an important role in text classification, which has the functions of eliminating irrelevant features, reducing dimensionality, and improving classification accuracy. So, this paper studies the CHI feature selection algorithm, and the main work and innovations are as follows: firstly, this paper analyzed the CHI algorithm's flaws, determined that the introduction of new parameters will be the improvement direction of the CHI algorithm, and thus proposed a new algorithm based on variance and coefficient of variation. Secondly, experiment to verify the effectiveness of the new algorithm. In terms of language, the experiment in this paper includes two text classification systems, which were Chinese and English. In terms of classifiers, two classifier algorithms were used, which included the KNN classifier and the Naive Bayes classifier. In terms of data types, two distribution types of data were used: balanced datasets and unbalanced datasets. Finally, experiment and result analysis. This paper has conducted 3 comparative experiments and analyzed the results of each experiment. The experimental results obtained are all significantly improved compared to the results before the improvement. [ABSTRACT FROM AUTHOR]

• A feature selection method based on binary dandelion algorithm is proposed. • The algorithm applies a sine-cosine operator and a restart strategy. • Mutual information and quick bit mutation improve the performance of the algorithm. • The algorithm performs well on datasets with larger dimensions. Feature selection (FS) is an important data preprocessing technology for machine learning and data mining. Metaheuristic algorithm (MH) has been widely used in feature selection because of its powerful search function. This paper presents an improved Binary Dandelion Algorithm using Sine Cosine operator and Restart strategy (SCRBDA) for feature selection. First, the sine cosine operator is used in the radius formula of the core dandelions (CD), which significantly enhances the ability of algorithm development and exploration. Secondly, the algorithm uses a restart strategy to increase its ability to get rid of local optimum. Thirdly, mutual information is used to guide the generation of some dandelions, which pays more attention to the correlation between the selected features and categories. Finally, quick bit mutation is used as the mutation strategy to improve the diversity of the population. The SCRBDA proposed in this paper was tested on 18 datasets of different sizes from UCI machine learning database. The SCRBDA was compared with 8 other classical feature selection algorithms, and the performance of the proposed algorithm was evaluated through feature subset size, classification accuracy, fitness value, and F1-score. The experimental results show that SCRBDA achieves the best performance, which has stronger feature reduction ability and achieves better overall performance on most datasets. Especially on large-scale datasets, SCRBDA can obtain extremely smaller feature subsets while maintaining much higher classification accuracy, and satisfactory F1-score. [ABSTRACT FROM AUTHOR]

Simple Summary: Single Cell RNA Sequencing generates gene expression data at a single cell resolution. While single cell RNA has many applications in biomedical research, the high dimensionality of the data produced poses a considerable computational challenge. This study proposes a novel algorithm using penalized regression methods to analyze single cell RNA sequencing data. The proposed algorithm reduces high dimensionality of the gene expression data using a sequence feature selection methods such as Ridge regression, LASSO, Elastic Net, Drop LASSO, and Sparse Group LASSO. The proposed algorithm successfully detected highly differentiated genes, including the marker genes, for 5 different single cell RNA sequencing datasets associated with the species mouse, plant, and human. With the emergence of single-cell RNA sequencing (scRNA-seq) technology, scientists are able to examine gene expression at single-cell resolution. Analysis of scRNA-seq data has its own challenges, which stem from its high dimensionality. The method of machine learning comes with the potential of gene (feature) selection from the high-dimensional scRNA-seq data. Even though there exist multiple machine learning methods that appear to be suitable for feature selection, such as penalized regression, there is no rigorous comparison of their performances across data sets, where each poses its own challenges. Therefore, in this paper, we analyzed and compared multiple penalized regression methods for scRNA-seq data. Given the scRNA-seq data sets we analyzed, the results show that sparse group lasso (SGL) outperforms the other six methods (ridge, lasso, elastic net, drop lasso, group lasso, and big lasso) using the metrics area under the receiver operating curve (AUC) and computation time. Building on these findings, we proposed a new algorithm for feature selection using penalized regression methods. The proposed algorithm works by selecting a small subset of genes and applying SGL to select the differentially expressed genes in scRNA-seq data. By using hierarchical clustering to group genes, the proposed method bypasses the need for domain-specific knowledge for gene grouping information. In addition, the proposed algorithm provided consistently better AUC for the data sets used. [ABSTRACT FROM AUTHOR]

Background: Machine learning can be used to predict the different onset of human cancers. Highly dimensional data have enormous, complicated problems. One of these is an excessive number of genes plus over-fitting, fitting time, and classification accuracy. Recursive Feature Elimination (RFE) is a wrapper method for selecting the best subset of features that cause the best accuracy. Despite the high performance of RFE, time computation and over-fitting are two disadvantages of this algorithm. Random forest for selection (RFS) proves its effectiveness in selecting the effective features and improving the over-fitting problem. Method: This paper proposed a method, namely, positions first bootstrap step (PFBS) random forest selection recursive feature elimination (RFS-RFE) and its abbreviation is PFBS- RFS-RFE to enhance cancer classification performance. It used a bootstrap with many positions included in the outer first bootstrap step (OFBS), inner first bootstrap step (IFBS), and outer/ inner first bootstrap step (O/IFBS). In the first position, OFBS is applied as a resampling method (bootstrap) with replacement before selection step. The RFS is applied with bootstrap = false i.e., the whole datasets are used to build each tree. The importance features are hybrid with RFE to select the most relevant subset of features. In the second position, IFBS is applied as a resampling method (bootstrap) with replacement during applied RFS. The importance features are hybrid with RFE. In the third position, O/IFBS is applied as a hybrid of first and second positions. RFE used logistic regression (LR) as an estimator. The proposed methods are incorporated with four classifiers to solve the feature selection problems and modify the performance of RFE, in which five datasets with different size are used to assess the performance of the PFBS-RFS-RFE. Results: The results showed that the O/IFBS-RFS-RFE achieved the best performance compared with previous work and enhanced the accuracy, variance and ROC area for RNA gene and dermatology erythemato-squamous diseases datasets to become 99.994%, 0.0000004, 1.000 and 100.000%, 0.0 and 1.000, respectively. Conclusion: High dimensional datasets and RFE algorithm face many troubles in cancers classification performance. PFBS-RFS-RFE is proposed to fix these troubles with different positions. The importance features which extracted from RFS are used with RFE to obtain the effective features. [ABSTRACT FROM AUTHOR]

In fault detection and the diagnosis of large industrial systems, whose chemical processes usually exhibit complex, high-dimensional, time-varying and non-Gaussian characteristics, the classification accuracy of traditional methods is low. In this paper, a kernel limit learning machine (KELM) based on an adaptive variation sparrow search algorithm (AVSSA) is proposed. Firstly, the dataset is optimized by removing redundant features using the eXtreme Gradient Boosting (XGBOOST) model. Secondly, a new optimization algorithm, AVSSA, is proposed to automatically adjust the network hyperparameters of KELM to improve the performance of the fault classifier. Finally, the optimized feature sequences are fed into the proposed classifier to obtain the final diagnosis results. The Tennessee Eastman (TE) chemical process is used to verify the effectiveness of the proposed method through multidimensional diagnostic metrics. The results show that our proposed diagnosis method can significantly improve the accuracy of TE process fault diagnosis compared with traditional optimization algorithms. The average diagnosis rate for 21 faults was 91.00%. [ABSTRACT FROM AUTHOR]

• MMODE is developed as a new hybrid gene selection method for tumor identification. • MMODE combines multi-tasking and multi-objective frameworks. • MMODE uses a new elite strategy and a new guidance strategy. • MMODE selects a few genes and achieves high classification accuracy. A key preprocessing step in tumor recognition based on microarray expression profile data and machine learning is to identify tumor marker genes. Gene selection aims to select the most relevant gene subset from the original ultra-high dimensional microarray expression profile data to improve tumor identification performance. Inspired by evolutionary multitasking (EMT) and multi-objective optimization, this paper puts forward a novel multitasking multi-objective differential evolution gene selection algorithm (MMODE) which uses new elite and guidance strategies to select the best gene subsets. MMODE initializes two different populations according to different filtering criteria to increase the diversity of the search. These two populations guide their respective populations to search in the optimal direction through knowledge transfer in the evolutionary process. In addition, MMODE employs new elite and guidance strategies that enables individuals to narrow the search range and jump out of local optima. The proposed algorithm is validated on 13 publicly available microarray expression datasets in comparison with state-of-the-art gene selection algorithms. The experimental results show that MMODE can find smaller gene subsets and achieve higher classification accuracy compared with other algorithms. [ABSTRACT FROM AUTHOR]

With the development of artificial intelligence, big data classification technology provides the advantageous help for the medicine auxiliary diagnosis research. While due to the different conditions in the different sample collection, the medical big data is often imbalanced. The class-imbalance problem has been reported as a serious obstacle to the classification performance of many standard learning algorithms. SMOTE algorithm could be used to generate sample points randomly to improve imbalance rate, but its application is affected by the marginalization generation and blindness of parameter selection. Focusing on this problem, an improved SMOTE algorithm based on Normal distribution is proposed in this paper, so that the new sample points are distributed closer to the center of the minority sample with a higher probability to avoid the marginalization of the expanded data. Experiments show that the classification effect is better when use proposed algorithm to expand the imbalanced dataset of Pima, WDBC, WPBC, Ionosphere and Breast-cancer-wisconsin than the original SMOTE algorithm. In addition, the parameter selection of the proposed algorithm is analyzed and it is found that the classification effect is the best when the distribution characteristics of the original data was maintained best by selecting appropriate parameters in our designed experiments. [ABSTRACT FROM AUTHOR]

Background: Finding significant genes or proteins from gene chip data for disease diagnosis and drug development is an important task. However, the challenge comes from the curse of the data dimension. It is of great significance to use machine learning methods to find important features from the data and build an accurate classification model. Results: The proposed method has proved superior to the published advanced hybrid feature selection method and traditional feature selection method on different public microarray data sets. In addition, the biomarkers selected using our method show a match to those provided by the cooperative hospital in a set of clinical cleft lip and palate data. Method: In this paper, a feature selection algorithm ILRC based on clustering and improved L1 regularization is proposed. The features are firstly clustered, and the redundant features in the sub-clusters are deleted. Then all the remaining features are iteratively evaluated using ILR. The final result is given according to the cumulative weight reordering. Conclusion: The proposed method can effectively remove redundant features. The algorithm's output has high stability and classification accuracy, which can potentially select potential biomarkers. [ABSTRACT FROM AUTHOR]

Heart-rate variability has proved a valid tool in prognosis definition of patients with congestive heart failure (CHF). Previous research has documented Poincaré plot analysis as a valuable approach to study heart-rate variability performance among different subjects. In this paper, we explored the possibility to feed machine-learning (ML) algorithms using unconventional quantitative parameters extracted from Poincaré plots (generated from 24-h electrocardiogram recordings) to classify patients with CHF belonging to different New York Heart Association (NYHA) classes. We performed in sequence the following investigations: first, a statistical analysis was carried out on 9 morphological parameters, automatically measured from Poincaré plots. Subsequently, a feature selection through a wrapper with a 10-fold cross-validation method was performed to find the best subset of features which maximized the classification accuracy for each considered ML algorithm. Finally, patient classification was assessed through a ML analysis using AdaBoost of Decision Tree, k-Nearest Neighbors and Naive Bayes algorithms. A univariate statistical analysis proved 5 out of 9 parameters presented statistically significant differences among patients of distinct NYHA classes; similarly, a multivariate logistic regression confirmed the importance of the parameter ry in the separability between low-risk and high-risk classes. The ML analysis achieved promising results in terms of evaluation metrics (especially the Naive Bayes algorithm), with accuracies greater than 80% and Area Under the Receiver Operating Curve indices greater than 0.7 for the overall three algorithms. The study indicates the proposed features have a predictive power to discriminate the NYHA classes, to which the features seem evenly correlated. Despite the NYHA classification being subjective and easily recognized by cardiologists, the potential relevance in the clinical cardiology of the proposed features and the promising ML results implies the methodology could be a valuable approach to automatically classify CHF. Future investigations on enriched datasets may further confirm the presented evidence. [ABSTRACT FROM AUTHOR]

Background: This paper exploits recent developments in topological data analysis to present a pipeline for clustering based on Mapper, an algorithm that reduces complex data into a one-dimensional graph. Results: We present a pipeline to identify and summarise clusters based on statistically significant topological features from a point cloud using Mapper. Conclusions: Key strengths of this pipeline include the integration of prior knowledge to inform the clustering process and the selection of optimal clusters; the use of the bootstrap to restrict the search to robust topological features; the use of machine learning to inspect clusters; and the ability to incorporate mixed data types. Our pipeline can be downloaded under the GNU GPLv3 license at https://github.com/kcl-bhi/mapper-pipeline. [ABSTRACT FROM AUTHOR]

Nuclear power plant operating data are characterized by a large variety, strong coupling, and low data value density. When using machine learning techniques for fault diagnosis and other related research, feature selection enables dimensionality reduction while maintaining the physical meaning of the original features, thus improving the computational efficiency and generalization ability of the learning model. In this paper, a correlation-based feature selection algorithm is developed to implement feature selection of nuclear power plant operating data. The proposed algorithm is verified by experiments and compared with traditional correlation-based feature selection algorithms. The experiments and comparison results show that the proposed algorithm is effective in realizing the dimensionality reduction of nuclear power plant operating data. [ABSTRACT FROM AUTHOR]

With the development of civil aviation, the number of flights keeps increasing and the flight delay has become a serious issue and even tends to normality. This paper aims to prove that Stacking algorithm has advantages in airport flight delay prediction, especially for the algorithm selection problem of machine learning technology. In this research, the principle of the Stacking classification algorithm is introduced, the SMOTE algorithm is selected to process imbalanced datasets, and the Boruta algorithm is utilized for feature selection. There are five supervised machine learning algorithms in the first-level learner of Stacking including KNN, Random Forest, Logistic Regression, Decision Tree, and Gaussian Naive Bayes. The second-level learner is Logistic Regression. To verify the effectiveness of the proposed method, comparative experiments are carried out based on Boston Logan International Airport flight datasets from January to December 2019. Multiple indexes are used to comprehensively evaluate the prediction results, such as Accuracy, Precision, Recall, F1 Score, ROC curve, and AUC Score. The results show that the Stacking algorithm not only could improve the prediction accuracy but also maintains great stability. [ABSTRACT FROM AUTHOR]

Feature selection is one of the main steps in preprocessing data in machine learning, and its goal is to reduce features by removing additional and noisy features. Feature selection methods and feature reduction in a dataset must consider the accuracy of the classifying algorithms. Meta-heuristic algorithms serve as the most successful and promising methods to solve this problem. Symbiotic Organisms Search (SOS) is one of the most successful meta-heuristic algorithms inspired by organisms' interaction in nature called mutualism, commensalism, and parasitism. In this paper, three SOS-based binary approaches are offered to solve the feature selection problem. In the first and second approaches, several S-shaped transfer functions and several Chaotic Tent Function-based V-shaped transfer functions called BSOSST and BSOSVT are used to make the binary SOS (BSOS). In the third approach, an advanced BSOS based on changing SOS and the chaotic Tent function operators called EBCSOS is provided. The EBCSOS algorithm uses the chaotic Tent function and the Gaussian mutation to increase usefulness and exploration. Moreover, two new operators, i.e., BMPT and BCPT, are suggested to make the commensalism and mutualism stage binary based on a chaotic function to solve the feature selection problem. Finally, the proposed BSOSST and BSOSVT methods and the advanced version of EBCSOS were implemented on 25 datasets than the basic algorithm's binary meta-heuristic algorithms. Various experiments demonstrated that the proposed EBCSOS algorithm outperformed other methods in terms of several features and accuracy. To further confirm the proposed EBCSOS algorithm, the problem of detecting spam E-mails was applied, with the results of this experiment indicating that the proposed EBCSOS algorithm significantly improved the accuracy and speed of all categories in detecting spam E-mails. [ABSTRACT FROM AUTHOR]

Highlights • Fault prediction improves the effectiveness of software quality assurance activities. • This paper focuses on building an effective fault prediction classifier. • Fault prediction model using Iterated feature selection algorithms with L-RNN. • We perform experiments on 19 open source projects. • Fault prediction model is best suitable for projects with faulty classes less than the threshold value. Abstract Software fault prediction (SFP) is typically used to predict faults in software components. Machine learning techniques (e.g., classification) are widely used to tackle this problem. With the availability of the huge amount of data that can be obtained from mining software historical repositories, it becomes possible to have some features (metrics) that are not correlated with the faults, which consequently mislead the learning algorithm and thus decrease its performance. One possible solution to eliminate those metrics is Feature Selection (FS). In this paper, a novel FS approach is proposed to enhance the performance of a layered recurrent neural network (L-RNN), which is used as a classification technique for the SFP problem. Three different wrapper FS algorithms (i.e, Binary Genetic Algorithm (BGA), Binary Particle Swarm Optimization (BPSO), and Binary Ant Colony Optimization (BACO)) were employed iteratively. To assess the performance of the proposed approach, 19 real-world software projects from PROMISE repository are investigated and the experimental results are discussed. Receiver operating characteristic - area under the curve (ROC-AUC) is used as a performance measure. The results are compared with other state-of-art approaches including Naïve Bayes (NB), Artificial Neural Network (ANN), logistic regression (LR), the k-nearest neighbors (k-NN) and C4.5 decision trees, in terms of area under the curve (AUC). Our results have demonstrated that the proposed approach can outperform other existing methods. [ABSTRACT FROM AUTHOR]

This paper proposes a mixture regression model-based method for drug sensitivity prediction. The proposed method explicitly addresses two fundamental issues in drug sensitivity prediction, namely, population heterogeneity and feature selection pertaining to each of the subpopulations. The mixture regression model is estimated using the imputation-conditional consistency algorithm, and the resulting estimator is consistent. This paper also proposes an average-BIC criterion for determining the number of components for the mixture regression model. The proposed method is applied to the CCLE dataset, and the numerical results indicate that the proposed method can make a drastic improvement over the existing ones, such as random forest, support vector regression, and regularized linear regression, in both drug sensitivity prediction and feature selection. The p-values for the comparisons in drug sensitivity prediction can reach the order O(10−8) or lower for the drugs with heterogeneous populations. [ABSTRACT FROM AUTHOR]

Attribute reduction can remove data noise and redundancy, thus reducing computational complexity, which is very important for machine learning. Because the difference between nominal attribute values is difficult to measure, attribute reduction for hybrid data faces challenges. In addition, most of the existing methods are sensitive to noise due to the lack of an anti-noise mechanism. Decision attribute contains the most important information of data. This paper proposes some techniques that consider the above problems from the perspective of fuzzy evidence theory. First of all, a new distance incorporating decision attributes is defined, and then a new fuzzy relation with an anti-noise mechanism is defined. Furthermore, fuzzy belief and fuzzy plausibility are defined based on the defined new distance and new fuzzy relation. In this framework, two anti-noise attribute reduction algorithms for hybrid data are proposed. Experiments on 12 data sets of various types show that compared with the other 8 state-of-the-art algorithms, the proposed algorithms improve the classification accuracy by at least 2% and the anti-noise ability by at least 11%. Therefore, it can be concluded that the proposed algorithms have excellent anti-noise ability while maintaining good feature selection ability. [ABSTRACT FROM AUTHOR]

Accurate identification of Golgi protein types can provide useful clues to reveal the correlation between GA dysfunction and disease pathology and improve the ability to develop more effective treatments for the diseases. This paper introduces an effective and robust method to classify Golgi protein type with traditional machine learning algorithms. In which various features such as n-GDip, DCCA, psePSSM were used as training features and SVM with linear kernel was employed as a classifier. To solve the imbalance problem of the benchmark datasets, the oversampling technique SMOTE was adopted. To deal with the huge amount of features, the PCA algorithm and Fisher feature selection method were adopted to reduce feature dimensions and remove redundant features. The experimental results show that the proposed method had a further improvement compared with other traditional machine learning methods in 10-fold cross-validation, Jackknife cross-validation and independent testing, which means a further step for the clinical application of computational methods to predict the Golgi protein types. [ABSTRACT FROM AUTHOR]

Due to the huge amount of data being generating from different sources, the analyzing and extracting of useful information from these data becomes a very complex task. The difficulty of dealing with big data optimization problems comes from many factors such as the high number of features, and the existing of lost data. The feature selection process becomes an important step in many data mining and machine learning algorithms to reduce the dimensionality of the optimization problems and increase the performance of the classification or clustering algorithms. In this paper, a set of hybrid and efficient genetic algorithms are proposed to solve feature selection problem, when the handled data has a large feature size. The proposed algorithms use a new gene-weighted mechanism that can adaptively classify the features into strong relative features, weak or redundant features, and unstable features during the evolution of the algorithm. Based on this classification, the proposed algorithm gives the strong features high priority and the weak features less priority when generating new candidate solutions. In the same time, the proposed algorithm tries to more concentrate on unstable features that sometimes appear and sometimes disappear from the best solutions of the population. The performance of proposed algorithms is investigated by using different datasets and feature selection algorithms. The results show that our proposed algorithms can outperform the other feature selection algorithms and effectively enhance the classification performance over the tested datasets. [ABSTRACT FROM AUTHOR]

The Industry 4.0 revolution is insisting strongly for use of machine learning-based processes and condition monitoring. In this paper, emphasis is given on machine learning-based approach for condition monitoring of shaft misalignment. This work highlights combined approach of artificial neural network and support vector machine for identification and measure of shaft misalignment. The measure of misalignment requires more features to be extracted under variable load conditions. Hence, primary objective is to measure misalignment with a minimum number of extracted features. This is achieved through normalization of vibration signal. An experimental setup is prepared to collect the required vibration signals. The normalized time domain nonstationary signals are given to discrete wavelet transform for features extraction. The extracted features such as detailed coefficient is considered for feature selection viz. Skewness, Kurtosis, Max, Min, Root mean square, and Entropy. The ReliefF algorithm is used to decide best feature on rank basis. The ratio of maximum energy to Shannon entropy is used in wavelet selection. The best feature is used to train machine learning algorithm. The rank-based feature selection has improved classification accuracy of support vector machine. The result obtained with the combined approach are discussed for different misalignment conditions. [ABSTRACT FROM AUTHOR]

Introduction/purpose: The anomaly-based intrusion detection system detects intrusions based on a reference model which identifies the normal behavior of a computer network and flags an anomaly. Machine-learning models classify intrusions or misuse as either normal or anomaly. In complex computer networks, the number of training records is large, which makes the evaluation of the classifiers computationally expensive. Methods: A feature selection algorithm that reduces the dataset size is presented in this paper. Results: The experiments are conducted on the Kyoto 2006+ dataset and four classifier models: feedforward neural network, k-nearest neighbor, weighted k-nearest neighbor, and medium decision tree. The results show high accuracy of the models, as well as low false positive and false negative rates. Conclusion: The three-step pre-processing algorithm for feature selection and instance normalization resulted in improving performances of four binary classifiers and in decreasing processing time. [ABSTRACT FROM AUTHOR]

Filter or screening methods are often used as a preprocessing step for reducing the number of variables used by a learning algorithm in obtaining a classification or regression model. While there are many such filter methods, there is a need for an objective evaluation of these methods. Such an evaluation is needed to compare them with each other and also to answer whether they are at all useful, or a learning algorithm could do a better job without them. For this purpose, many popular screening methods are partnered in this paper with three regression learners and five classification learners and evaluated on ten real datasets to obtain accuracy criteria such as R-square and area under the ROC curve (AUC). The obtained results are compared through curve plots and comparison tables in order to find out whether screening methods help improve the performance of learning algorithms and how they fare with each other. Our findings revealed that the screening methods were useful in improving the prediction of the best learner on two regression and two classification datasets out of the ten datasets evaluated. [ABSTRACT FROM AUTHOR]

Highlights • Feature selection over high-dimensional colon cancer Microarray Datasets. • Features selected from both Gene Expression and DNA-Methylation Microarray datasets. • Resultant six biomarker genes for colon cancer validated using Enrichment Analysis. • Biomarker genes validated on independent datasets with 99.9% classification accuracy. Abstract Cancer is a dangerous disease that causes death worldwide. Discovering few genes relevant to one cancer disease can result in effective treatments. The challenge associated with the Microarray datasets is its high dimensionality; the huge number of features compared to the modest number of samples in these datasets. Recent research efforts attempted to reduce this high-dimensionality using different feature selection techniques. This paper presents an ensemble feature selection technique based on t -test and genetic algorithm. After preprocessing the data using t -test, a Nested Genetic Algorithm, namely Nested-GA, is used to get the optimal subset of features by combining data from two different datasets. Nested-GA consists of two Nested Genetic Algorithms (outer and inner) that run on two different kinds of datasets. The Outer Genetic Algorithm (OGA-SVM) works on Microarray gene expression datasets, whereas the Inner Genetic Algorithm (IGA-NNW) runs on DNA Methylation datasets. Nested-GA is performed on a colon cancer dataset with 5-fold cross validation. After applying Nested-GA, the Incremental Feature Selection (IFS) strategy is used to get the smallest optimal genes subset. The genes subset has been validated on an independent dataset resulting in 99.9% classification accuracy. Consequently, the biological significance of the resulting optimal genes is validated using Enrichment Analysis. Moreover, the results of Nested-GA have been compared to the results of other feature selection algorithms that have been run on either Gene Expression or DNA Methylation datasets. From the experimental results, Nested-GA showed the highest classification performance with a small optimal feature subset compared to the other algorithms. Furthermore, by running Nested-GA on lung cancer datasets that contain two different cancer subtypes, it resulted in significantly better classification accuracy (98.4%) compared to the accuracy of a previous research (84.6%) that utilized lung cancer DNA-Methylation data only. [ABSTRACT FROM AUTHOR]

High dimensional biomedical data contain tens of thousands of features, accurate and effective identification of the core features in these data can be used to assist diagnose related diseases. However, there are often a large number of irrelevant or redundant features in biomedical data, which seriously affect subsequent classification accuracy and machine learning efficiency. To solve this problem, a novel filter feature selection algorithm based on redundant removal (FSBRR) is proposed to classify high dimensional biomedical data in this paper. First of all, two redundant criteria are determined by vertical relevance (the relationship between feature and class attribute) and horizontal relevance (the relationship between feature and feature). Secondly, to quantify redundant criteria, an approximate redundancy feature framework based on mutual information (MI) is defined to remove redundant and irrelevant features. To evaluate the effectiveness of our proposed algorithm, controlled trials based on typical feature selection algorithm are conducted using three different classifiers, and the experimental results indicate that the FSBRR algorithm can effectively reduce the feature dimension and improve the classification accuracy. In addition, an experiment of small sample dataset is designed and conducted in the section of discussion and analysis to clarify the specific implementation process of FSBRR algorithm more clearly. [ABSTRACT FROM AUTHOR]

Highlights • Two binary variants of the butterfly optimization algorithm (BOA) are proposed. • Two transfer functions are used to map the continuous search space to discrete one. • Twenty one UCI datasets are utilized in the experiments. • A superior performance of the proposed binary variants is proved in the experiments. Abstract In this paper, binary variants of the Butterfly Optimization Algorithm (BOA) are proposed and used to select the optimal feature subset for classification purposes in a wrapper-mode. BOA is a recently proposed algorithm that has not been systematically applied to feature selection problems yet. BOA can efficiently explore the feature space for optimal or near-optimal feature subset minimizing a given fitness function. The two proposed binary variants of BOA are applied to select the optimal feature combination that maximizes classification accuracy while minimizing the number of selected features. In these variants, the native BOA is utilized while its continuous steps are bounded in a threshold using a suitable threshold function after squashing them. The proposed binary algorithms are compared with five state-of-the-art approaches and four latest high performing optimization algorithms. A number of assessment indicators are utilized to properly assess and compare the performance of these algorithms over 21 datasets from the UCI repository. The experimental results confirm the efficiency of the proposed approaches in improving the classification accuracy compared to other wrapper-based algorithms, which proves the ability of BOA algorithm in searching the feature space and selecting the most informative attributes for classification tasks. [ABSTRACT FROM AUTHOR]

Background: Classification and localization of focal epileptic seizures provide a proper diagnostic procedure for epilepsy patients. Visual identification of seizure activity from long-term electroencephalography (EEG) is tedious, time-consuming and leads to human error. Therefore, there is a need for an automated classification system. Methods: In this paper, we introduce a tool called CADFES: computerized automated detection of focal epileptic seizures. For the study, total 41.66 hours of EEG data from the Bern-Barcelona database was used. Set of 28 features were extracted from time, frequency, and statistical domain and significant features were selected using neighborhood component analysis (NCA). In NCA, optimization of regularization parameter ensured better classification accuracy (less classification loss) with seven features. The performance of the algorithm was assessed using support vector machine (SVM), K-nearest neighbor (K-NN), random forest and adaptive boosting (AdaBoost) classifiers. Results: Experimental results revealed sensitivity, specificity, accuracy, positive predictive rate, negative predictive rate, and area under the curve of 97.6%, 94.4%, 96.1%, 92.9%, 98.8% and 0.96 respectively using the SVM classifier. Finally, MATLAB based software tool referred to as CADFES was introduced for automated classification of focal and non-focal seizures. Comparison results ensure that proposed study is superior to existing methods. Hence, it is expected to perform better at the hospitals for automated classification of focal epileptic seizures in real-time. [ABSTRACT FROM AUTHOR]

In recent years, cyber-attacks against businesses and organizations have increased. Such attacks usually result in significant damage to the organization, such as the loss and/or leakage of sensitive and confidential information. Because email communication is an integral part of daily business operations, attackers frequently leverage email as an attack vector in order to initially penetrate the targeted organization. Email message allows the attacker to deliver dangerous content to the victim, such as malicious attachments or links to malicious websites. Existing email analysis solutions analyze only specific parts of the email using rule-based methods, while other important parts remain unanalyzed. Existing anti-virus engines primarily use signature-based detection methods, and therefore are insufficient for detecting new unknown malicious emails. Machine learning methods have been shown to be effective at detecting maliciousness in various domains and particularly in email. Previous works which used machine learning methods suggested sets of features which offer a limited perspective over the whole email message. In this paper, we propose a novel set of general descriptive features extracted from all email components (header, body, and attachments) for enhanced detection of malicious emails using machine learning methods. The proposed features are extracted just from the email itself; therefore, our features are independent, since the extraction process does not require an Internet connection or the use of external services or other tools, thereby meeting the needs of real-time detection systems. We conducted an extensive evaluation of our new novel features against sets of features suggested by previous academic work using a collection of 33,142 emails which contains 38.73% malicious and 61.27% benign emails. The results show that malicious emails can be detected effectively when using our novel features with machine learning algorithms. Moreover, our novel features enhance the detection of malicious emails when used in conjunction with features suggested by related work. The Random Forest classifier achieved the highest detection rates, with an AUC of 0.929, true positive rate (TPR) of 0.947, and false positive rate (FPR) of 0.03. We also present the IDR (integrated detection rate), a new measure which helps calibrate the threshold of a machine learning classifier in order to achieve the optimal TP and FP rates, which are the most important measures for a real-time and practical cyber-security application. [ABSTRACT FROM AUTHOR]

Feature selection and classification are the main topics in microarray data analysis. Although many feature selection methods have been proposed and developed in this field, SVM-RFE (Support Vector Machine based on Recursive Feature Elimination) is proved as one of the best feature selection methods, which ranks the features (genes) by training support vector machine classification model and selects key genes combining with recursive feature elimination strategy. The principal drawback of SVM-RFE is the huge time consumption. To overcome this limitation, we introduce a more efficient implementation of linear support vector machines and improve the recursive feature elimination strategy and then combine them together to select informative genes. Besides, we propose a simple resampling method to preprocess the datasets, which makes the information distribution of different kinds of samples balanced and the classification results more credible. Moreover, the applicability of four common classifiers is also studied in this paper. Extensive experiments are conducted on six most frequently used microarray datasets in this field, and the results show that the proposed methods have not only reduced the time consumption greatly but also obtained comparable classification performance. [ABSTRACT FROM AUTHOR]

Objective: This paper constructs a mortality prediction system based on a real-world dataset. This mortality prediction system aims to predict mortality in heart failure (HF) patients. Effective mortality prediction can improve resources allocation and clinical outcomes, avoiding inappropriate overtreatment of low-mortality patients and discharging of high-mortality patients. This system covers three mortality prediction targets: prediction of in-hospital mortality, prediction of 30-day mortality and prediction of 1-year mortality.Materials and Methods: HF data are collected from the Shanghai Shuguang hospital. 10,203 in-patients records are extracted from encounters occurring between March 2009 and April 2016. The records involve 4682 patients, including 539 death cases. A feature selection method called Orthogonal Relief (OR) algorithm is first used to reduce the dimensionality. Then, a classification algorithm named Dynamic Radius Means (DRM) is proposed to predict the mortality in HF patients.Results and Discussions: The comparative experimental results demonstrate that mortality prediction system achieves high performance in all targets by DRM. It is noteworthy that the performance of in-hospital mortality prediction achieves 87.3% in AUC (35.07% improvement). Moreover, the AUC of 30-day and 1-year mortality prediction reach to 88.45% and 84.84%, respectively. Especially, the system could keep itself effective and not deteriorate when the dimension of samples is sharply reduced.Conclusions: The proposed system with its own method DRM can predict mortality in HF patients and achieve high performance in all three mortality targets. Furthermore, effective feature selection strategy can boost the system. This system shows its importance in real-world applications, assisting clinicians in HF treatment by providing crucial decision information. [ABSTRACT FROM AUTHOR]

Cost-sensitive feature selection learning is an important preprocessing step in machine learning and data mining. Recently, most existing cost-sensitive feature selection algorithms are heuristic algorithms, which evaluate the importance of each feature individually and select features one by one. Obviously, these algorithms do not consider the relationship among features. In this paper, we propose a new algorithm for minimal cost feature selection called the rough sets and Laplacian score based cost-sensitive feature selection. The importance of each feature is evaluated by both rough sets and Laplacian score. Compared with heuristic algorithms, the proposed algorithm takes into consideration the relationship among features with locality preservation of Laplacian score. We select a feature subset with maximal feature importance and minimal cost when cost is undertaken in parallel, where the cost is given by three different distributions to simulate different applications. Different from existing cost-sensitive feature selection algorithms, our algorithm simultaneously selects out a predetermined number of “good” features. Extensive experimental results show that the approach is efficient and able to effectively obtain the minimum cost subset. In addition, the results of our method are more promising than the results of other cost-sensitive feature selection algorithms. [ABSTRACT FROM AUTHOR]

Assigning weights in features has been an important topic in some classification learning algorithms. In this paper, we propose a new paradigm of assigning weights in classification learning, called value weighting method. While the current weighting methods assign a weight to each feature, we assign a different weight to the values of each feature. The performance of naive Bayes learning with value weighting method is compared with that of some other traditional methods for a number of datasets. The experimental results show that the value weighting method could improve the performance of naive Bayes significantly. [ABSTRACT FROM AUTHOR]

A major issue of machinery fault diagnosis using vibration signals is that it is over-reliant on personnel knowledge and experience in interpreting the signal. Thus, machine learning has been adapted for machinery fault diagnosis. The quantity and quality of the input features, however, influence the fault classification performance. Feature selection plays a vital role in selecting the most representative feature subset for the machine learning algorithm. In contrast, the trade-off relationship between capability when selecting the best feature subset and computational effort is inevitable in the wrapper-based feature selection (WFS) method. This paper proposes an improved WFS technique before integration with a support vector machine (SVM) model classifier as a complete fault diagnosis system for a rolling element bearing case study. The bearing vibration dataset made available by the Case Western Reserve University Bearing Data Centre was executed using the proposed WFS and its performance has been analysed and discussed. The results reveal that the proposed WFS secures the best feature subset with a lower computational effort by eliminating the redundancy of re-evaluation. The proposed WFS has therefore been found to be capable and efficient to carry out feature selection tasks. [ABSTRACT FROM AUTHOR]

Age estimation has become inordinately significant for human beings for many reasons, such as detecting legal and criminal responsibility and other social events like a marriage license, birth certificate, etc. This paper aims to decide on the most desirable machine learning algorithm (from conventional machine learning algorithms to deep learning) for dental age estimation based on buccal bone level. The database consisted of 150 CBCT images (73 males and 77 females) from an existing base of the Faculty of Dental Medicine with Clinics, University of Sarajevo, aged 20-69. Results were obtained using the Waikato Environment for Knowledge Analysis (Weka), machine learning software in Java. Left and Right Buccal Alveolar Bone Levels are increasing with age, so they showed to be the most important attributes, especially the latter. Random Forest classifier provided the greatest result with the correlation coefficient of 0.803 and the mean absolute error of 6.022. We have also shown that considering sinus-related features can be a significant addition to the databases. Our paper is probably one of the first studies where regression algorithms based on the Support Vector Machines and Random Forest were utilized. [ABSTRACT FROM AUTHOR]

We live in a period when smart devices gather a large amount of data from a variety of sensors and it is often the case that decisions are taken based on them in a more or less autonomous manner. Still, many of the inputs do not prove to be essential in the decision-making process; hence, it is of utmost importance to find the means of eliminating the noise and concentrating on the most influential attributes. In this sense, we put forward a method based on the swarm intelligence paradigm for extracting the most important features from several datasets. The thematic of this paper is a novel implementation of an algorithm from the swarm intelligence branch of the machine learning domain for improving feature selection. The combination of machine learning with the metaheuristic approaches has recently created a new branch of artificial intelligence called learnheuristics. This approach benefits both from the capability of feature selection to find the solutions that most impact on accuracy and performance, as well as the well known characteristic of swarm intelligence algorithms to efficiently comb through a large search space of solutions. The latter is used as a wrapper method in feature selection and the improvements are significant. In this paper, a modified version of the salp swarm algorithm for feature selection is proposed. This solution is verified by 21 datasets with the classification model of K-nearest neighborhoods. Furthermore, the performance of the algorithm is compared to the best algorithms with the same test setup resulting in better number of features and classification accuracy for the proposed solution. Therefore, the proposed method tackles feature selection and demonstrates its success with many benchmark datasets. [ABSTRACT FROM AUTHOR]