Search

In this article, we present a novel nonlinear vector network analyzer (NVNA) setup for charactering the in-band full-duplex (IBFD) performance of millimeter-wave antenna systems. To achieve millimeter-wave modulated measurements on dense spectral grids, this NVNA setup utilizes user-defined: 1) digitally-modulated test stimuli; 2) multisine phase reference; and 3) pulsed-radio frequency (RF) phase calibration standards for test bench establishment and calibration. To create the IBFD test scenario, a special design of test stimuli is developed for antenna characterization, where the spectral components of two periodical transmitting signals (digitally modulated within the same frequency band) do not overlap with each other. In this way, the desired magnitude and phase information of transmitted and received signals can be easily separated and extracted from the NVNA measurements, to support various frequency-, time-, and digital-domain analysis. The validity of the proposed NVNA setup is experimentally verified at 28 GHz, where the error vector magnitude (EVM) results of 100 MSymbol/s 64-QAM test signals are from 2.0% to 2.3%. From the application perspective, this measurement setup and test method can be widely used for fifth-generation (5G)-oriented over-the-air test of IBFD antenna systems. [ABSTRACT FROM AUTHOR]

In this article, we present a novel nonlinear vector network analyzer (NVNA) setup for generating and measuring digitally modulated signals at millimeter-wave test bands. The first difference between this setup and commercial NVNAs is the use of a user-defined multisine signal as the phase reference, in order to enable more precise synchronization and denser spectral grid. To achieve this, a single 12.5-GHz microwave source is used for generating both the digitally modulated test signal and the phase reference, which not only offers the clock to the arbitrary waveform generator for user-defined intermediate frequency (IF) waveform generation but also provides the local oscillator drive after frequency multiplication. The second novelty of this work is the use of pulsed-radio frequency (RF) signals for NVNA phase calibration. By replacing the digitally modulated IF waveform with pulsed-RF signals, tone-by-tone phase calibration on dense spectral grids can be easily achieved under the same synchronization scheme. The validity of the proposed NVNA setup (as well as its simplified modification) and the phase calibration method is verified at the fifth-generation (5G)-oriented millimeter-wave bands of 28, 39, 43, and 70 GHz in this work, where the EVM measurements of 64-QAM test signals with a wide range of symbol rates from 0.1 to 1.5625 GSymbol/s are demonstrated reachable in practice. [ABSTRACT FROM AUTHOR]

We investigated the measurement techniques of the nonlinear vector network analyzer (NVNA) test bench, to fully characterize the nonlinear behavior of radio frequency (RF) power amplifiers (PAs) driven by complex modulated signals. In order to extend the baseband measurements, two kinds of NVNA phase reference approaches are developed as alternative solutions, so that the baseband phase measurements can be achieved with those of modulated components at multiharmonic RF bands. In the first approach, a modulated baseband signal is combined with another modulated RF one to become the desired NVNA phase reference. While as an alternative solution, the second phase reference design is based on a “stepped” multisine, which is stepped through the baseband and each harmonic following the NVNA swept measurements, to achieve stable phase measurements. To validate these proposed NVNA test bench designs, an RF PA, driven by a large-signal long-term evolution-like multisine, was tested and compared with digital real-time oscilloscope measurements. [ABSTRACT FROM PUBLISHER]

This paper presents novel nonlinear vector network analyzer (NVNA)-based techniques for characterizing the harmonic and intermodulation nonlinearity of dual-band radio frequency (RF) power amplifiers (PAs). On the one hand, a wideband Schroeder-phase multisine is used to drive a step recovery diode comb generator, so that a novel multiharmonic-band NVNA phase reference on a dense spectral grid is obtained. On the other hand, a novel phase calibration approach is developed to synchronize the NVNA multiband measurements. To validate the NVNA testbed with novel techniques, an RF PA under two typical kinds of dual-band multisine stimulus is tested, where the NVNA measurement is compared with that of an oscilloscope. This paper can be easily adapted for various multiband conditions. [ABSTRACT FROM PUBLISHER]

This paper presents a novel realization of nonlinear vector network analyzer (NVNA) test-bed with a new phase calibration technique, in order to characterize the multiharmonic intermodulation nonlinearity of a radio frequency (RF) power amplifier (PA) under a large-signal modulated input. The NVNA test-bed uses a step recovery diode comb generator as the phase reference, which is driven by a pulsed-RF signal with a high duty cycle of over 99%. Hence all the multiharmonic intermodulation tones of interest can be measured at once. A multisine phase standard provided by a vector signal analyzer is used to calibrate the intermodulation tones at each harmonic on a dense spectral grid. Two harmonic phase standards with different fundamental frequencies are used to synchronize the phase calibration results at different harmonics. The validity of this paper is verified by comparing NVNA measurements with oscilloscope measurements of the same PA under test. This paper can be used to inspect the nonlinearity of RF amplifiers under large-signal modulated excitations in both the frequency and time domains. [ABSTRACT FROM AUTHOR]