Search

The purpose of the paper was to design geometric models of the movable connection made of brass for three different attachment options and three different loads. The numerical analysis of the mechanical properties, stresses, strains and displacements using the finite element method was carried out in SolidWorks 2020 and their comparative analysis was performed. The computer simulations performed will allow the boundary conditions that directly affect the mechanical properties of the engineering materials to be optimised [ABSTRACT FROM AUTHOR]

• A numerical simulation method for the multifactor coupling of stress field and temperature field is developed. • The numerical simulation method is in good agreement with the experiment results at elevated temperatures. • The numerical simulative description of the grout material failure and fracture of a steel bar. • Prediction of the yield point and the ultimate point of FGSC from 25 °C to 1000 °C. Fire is one of the main objects of study at the cutting edge of the research on disaster prevention and mitigation in structures. In the event of a fire, the mechanical properties of the structural material will be significantly reduced, resulting in serious consequences. This paper simulates the tensile properties of sleeve grouting members at five different temperatures, to contribute to the research here. The simulated member stress-strain curves fit well with the corresponding experimental results. The paper introduces constitutive models of concrete, steel, and sleeve. Beyond that, a feasible finite element model of the grouted sleeve is proposed. Two special points' (yield point, ultimate point) coordinate formulas which are related to different temperatures (25–1000 °C) are presented. It indicates the regularity of fully-grouted sleeve tensile force-displacement curves in various temperatures. Meanwhile, the research content provides the basis for further research on reinforcing bars spliced by grout-filled coupling sleeves. [ABSTRACT FROM AUTHOR]

Within the civil engineering field, the use of the Finite Element Method has acquired a significant importance, since numerical simulations have been employed in a broad field, which encloses the design, analysis and prediction of the structural behaviour of constructions and infrastructures. Nevertheless, these mathematical simulations can only be useful if all the mechanical properties of the materials, boundary conditions and damages are properly modelled. Therefore, it is required not only experimental data (static and/or dynamic tests) to provide references parameters, but also robust calibration methods able to model damage or other special structural conditions. The present paper addresses the model calibration of a footbridge bridge tested with static loads and ambient vibrations. Damage assessment was also carried out based on a hybrid numerical procedure, which combines discrete damage functions with sets of piecewise linear damage functions. Results from the model calibration shows that the model reproduces with good accuracy the experimental behaviour of the bridge. [ABSTRACT FROM AUTHOR]