Search

Paired electrolysis offers an auspicious strategy for the generation of high‐value chemicals, at both the anode and cathode, in an integrated electrochemical reactor. Through efficient electron utilization, routine product misuse at overlooked electrodes can be prevented. Here, an original paired electrosynthetic system is reported that can convert CO2 to ethylene (C2H4) at the cathode, and water to hydrogen peroxide (H2O2) at the anode under a single pass of electric charge. Amongst various investigated copper (Cu) nanomorphologies, the bespoke mixed Cu nanowire/nanoparticle catalyst recorded a peak C2H4 Faraday efficiency (FE) of 60% following 370 h of electrolysis at 200 mA cm−2, while the tailored boron‐doped diamond (BDD) anode accumulated an unprecedented ≈1% w/w of H2O2 in 4 m K2CO3 upon applying 300 mA cm−2 for 10 h. When paired, the dual C2H4‐H2O2 electrochemical cell attains a combined FE of 120% for 50 h at 200 mA cm−2, a combined energy efficiency (EE) of 69%, and a 50% decrease in the overall electrical energy consumption (EEC) compared to the individual electrosynthesis of C2H4 and H2O2. [ABSTRACT FROM AUTHOR]

In an article published in Advanced Energy Materials, researchers describe a paired electrochemical reactor that can continuously produce ethylene and hydrogen peroxide. The reactor achieved a combined Faraday efficiency of 120% and an energy efficiency of 69% when operated at 200 mA cm−2 for 50 hours. Additionally, the reactor's overall electrical energy consumption was reduced by 50%. This research has implications for the sustainable production of chemicals and fuels using carbon dioxide reduction and water oxidation reactions. [Extracted from the article]

CO 2 reduction offers an attractive alternative green synthetic route for ethylene, especially where CO 2 could be sourced from industrial exhausts and in combination with green power sources. However, practical applications are currently limited due to the unfortunately low selectivity of cathode materials towards ethylene. This work uses polymers with intrinsic microporosity (PIMs) to improve the performance of copper gas diffusion electrodes for CO 2 reduction to ethylene. We report an improved selectivity and activity towards ethylene with the addition of a thin PIMs layer, which is seen as improved Faradaic efficiency, increased stability and a shift in the reduction to lower overpotential. This improvement is highly dependent on the thickness of the added polymer layer, with too thick a layer having a detrimental impact on the hydrophobicity of the gas diffusion layer. With a compromise in loading, PIMs can be used to enhance the activity and selectivity of catalysts for targeted CO 2 reduction to ethylene. Image 10694 • Gas diffusion electrodes allow CO 2 reduction to ethylene, but selectivity is low. • Polymers with intrinsic microporosity can increase ethylene production. • Using too much polymer has a detrimental impact. • A compromise polymer thickness increases ethylene yield and electrode stability. [ABSTRACT FROM AUTHOR]