Search

The JK Paper industry located at Rayagada discharges biologically untreated effluent more than the permissible limit prescribed by Pollution Control Board, Odisha in to the environment. The industry is seriously polluting the surrounding aquatic and terrestrial environment. No detailed intensive study was carried out by previous workers on this industry earlier. The present study aims at finding out the impact of effluent on the flora at the contaminated site. The chemically treated effluent (TE) contained significant amount of mercury and cadmium. The TE has high BOD, COD, dissolved solids and suspended solids when compared to normal river water at the site of discharge. The TE deteriorated the natural water bodies changing the physico-chemical properties of natural river water. After meeting the river water the TE was diluted after 1 km distance from the meeting point of the river. Crop plants collected from the contaminated site showed higher level of residual Hg and Cd and significant depletion in pigment was observed. Plants collected from both the sides of the treated effluent canal showed significant amount residue mercury and cadmium in the plant leaves. The plants exposed to the TE, showed variation in chlorophyll and Phaeophytin pigment content when compared to their respective control values in all terrestrial plants collected from the contaminated site. In some plant leaves little increment in the pigment level was noted but the values were not significant. The changes observed in the plant pigment might be due to heavy metal accumulation. The presence of residual Hg and Cd in crop plants and plant leaves grazed by grazing animals after absorption, accumulation and enrichment may lead to a possible biological magnification, warrants attention. Proper biological treatment, treatment of effluent by modern methods and removal of heavy metals from the effluent before discharge by the industry is suggested. • Biological treatment of the effluent was not carried out by the industry & chemicals present in the effluent were significantly high.. • The water quality of the river water deteriorated due to the discharge of effluent of the paper mill. • Plants collected from the contaminated site showed significant accumulation of cadmium and mercury in leaf tissues • Significant depletion in pigment content of exposed plant leaves was noticed. • Depletion in plant pigment was due to accumulation of cadmium and mercury in plant tissues absorbed from the effluent. [ABSTRACT FROM AUTHOR]

A long-term feasibility analysis of a 100 ton per day mechanical biological treatment (MBT) plant for municipal solid waste (MSW) valorization and material and energy recovery was carried out. It involves the material recovery and segregation stage (MRSS), organic extraction (pulping), thermophilic anaerobic digestion (AD), composting, effluent treatment plant (ETP), and biogas genset stages producing: 11.90% recyclables, 33% refused derived fuel (RDF), 5% compost of total waste received, 70 m3/day recyclable water and 0.435 MWh/day electricity. The biogas and methane yield were 0.535 and 0.350 m3/kg VS added (avg.), respectively, with 40% VS removal (avg total solids (TS) 10%). Less than 3% (inert) of total waste received was subjected to landfill disposal. The MBT plant's revenue generation is 995 US$ per day/148 tons ($ 6.72/ton) waste processed. The gross OPEX is 24 US$/ton making the net OPEX of 17 US$/ton (minus revenue), which could be considered as the excellent OPEX for MSW based MBT plants as per global benchmarks. Further, local usage of RDF can significantly reduce the OPEX to 14 US$/ton, as almost 16% of the OPEX goes towards RDF disposal to cement companies located at a distance of 200–500 km from the MBT plant site. As per LCA study, the total GHG emissions have been calculated to be −25.68 tons CO 2 eq./100 tons MSW. The negative emissions result from the export of electricity, compost, and RDF as well as recycling of paper and plastic products. Our study presents a cutting-edge scenario of all-inclusive recycling, recovery, and reuse loop of MSW direly required for accomplishing a circular economy. [Display omitted] • Long term performance of first successful 100 tons/d MBT plant in India was studied. • 12% recyclable, 33% RDF, 0.435 MWh/d power, 5% compost, 70 m3/d water were recovered. • Biogas and methane yield were 0.535 and 0.350 m3/kgVS added (65%CH 4), 40%VS removal. • MBT plant has OPEX of US$ 24/ton and revenue of $6.72/ton; net OPEX of US$ 17/ton. • LCA study revealed the negative GHG emission of −41.45 tons CO 2 eq./100 tons MSW. [ABSTRACT FROM AUTHOR]

Phenolic compounds are one of the main contributors to water source contamination worldwide. In this review, the data collected on Elsevier, Scopus, and Pubmed, considering papers published between 2000 and 2023, showed more than 60 different phenols have been identified in water matrix (<0.065–179,000,000 ng L−1). The highest concentration reported was in surface water canals in India. The most recurrent and studied compound was bisphenol A (n = 93) in concentrations ranging from 0.45 to 2,970,000 ng L−1. The solid phase extraction (HBL Oasis cartridge) and methanol as solvent was the method of pre-concentration most used followed by gas chromatography for the determination of phenols in water samples. The importance of drinking water guidelines incorporating more phenolic compounds was emphasized given the variety of these compounds quantified in water matrix. The human health risk assessment (HRA) was performed for the min-max concentrations of the pollutants reported in the literature. High HRA even at the lowest concentrations for 2-nitrophenol, 2,6-dichlorophenol, 3,4,5-trichlorophenol, 2,3,4,6-tetrachlorophenol, and 2,4-dinitrophenol was recognized. The cancer risk estimated was considered possible for 3-methylphenol, 2,4-dimethylphenol, 2,4,6-trichlorophenol, pentachlorophenol, and 2,4-dinitrophenol in the highest concentrations. The in-depth discussion of mechanisms, advantages, challenges, and carbon footprint of membrane technologies in water treatment and phenols retention demonstrated the great potential and trends for the production of safe drinking water, highlighting reverse osmosis, as a mature technology, and membrane distillation, as an emergent technology. [Display omitted] • More than 60 phenolic compounds were identified in water sources. • The highest concentration in surface water was reported as 1.79 E8 ng L−1 in India. • Water guidelines address, in general, only 14 phenols. • High risk to human health and the possibility of cancer were estimated. • Membrane technology can effectively remove phenols, especially reverse osmosis. [ABSTRACT FROM AUTHOR]

South Asia's coastlines are the most densely inhabited and economically active ecosystems have already begun to shift due to climate change. Over the past century, climate change has contributed to a gradual and considerable rise in sea level, which has eroded shorelines and increased storm-related coastal flooding. The differences in estuary water quality over time, both seasonally and annually, have been efficiently controlled by changes in stream flow. Assessment requires digitized analytical platforms to lower the risk of catastrophes associated with climate change in coastal towns. To predict future changes in an area's vulnerability and waste planning decisions, a prospective investigation requires qualitative and quantitative scenarios. The paper concentrates on the development of a forecasting platform to evaluate the climate change and waste water impacts on the south coastal region of India. Due to the enhancement of Digitization, a multi-model ensemble combined with manifold learning is implemented on the multi-case models influencing the uncertainty probability rate of 23% and can be ignored with desired precaution on the coastal environmental. Because Manifold Learning Analysis results cannot be utilized directly in wastewater management studies because of their inherent biases, a statistical bias correction and meta-feature estimation have been implemented. Within the climate-hydrology modeling chain, the results demonstrate a wide range of expected changes in water resources in some places. Experimental statistics reveal that the forecasted rate of 91.45% will be the better choice to reduce the uncertainty of climatic change and wastewater management. • Development of Multi-Objective Neighborhood Embedding Ensemble Strategy (NEES) to predict waste water and climate change impacts. • Manifold learning with metafeatures estimator model to forecast the temperature index and oxygen depletion. • Enhanced Coastal Management system with multi-parameter reliability model for South Asia Coastal region to safeguard the environmental eco-stability. • Manifold predictor models for waste water impact and climatic influence with maximum data samples with optimized cost function. [ABSTRACT FROM AUTHOR]

Economists have used historical heights as markers of health, living standards, and long-run development. Although possible selection bias has been debated, height measurement error is less studied. I analyze novel administrative data of male Indian indentured laborers with repeated measurements of adult height to answer an important underlying question of precision. Laborers were measured by British colonial officials on departure in India and again several years later when opting to return to India. I find no height differences for men who had attained full height in India. Younger men continued to grow even into their twenties. A caste subgroup analysis finds mostly similar results. This paper provides some of the first evidence showing height consistency in repeated measurements of adult heights. [ABSTRACT FROM AUTHOR]

Implementing unified municipal solid waste management (MSWM) is often difficult due to socio-economic variables. However, spatial GIS models and statistical analysis of solid waste characterized by the weekdays, weekends, and festivals can somewhat mitigate the variance and assist with selecting suitable waste management methods. This paper presents the example of Rajouri, India, to propose a suitable MSWM based on Inverse Distance Weighted (IDW) intensity maps and statistical findings. The considered region was divided into different sample sites based on the local population density, and Municipal Solid Waste (MSW) was collected from four locations in each site on weekdays, weekends, and festivals. Compositional analysis of the MSW was then used to generate spatial IDW models in QGIS 3.22.7 to interpolate MSW generation over the entire area. Finally, statistical analysis was conducted to gain insight into the waste generation and accumulation trends. The results show that Rajouri produces 245 tonnes of waste daily (per capita: 0.382 kg/day) with a large organic fraction compared to other waste categories. Besides, waste generation is observed to increase over weekends and festivals due to increased consumption of material goods. Composting could serve as a vector for municipal solid waste because of its increased organic component and cost constraints. However, further research on the potential segregation techniques for the organic fraction of solid waste is needed. • Extensive MSW sampling on weekdays, weekends, and festivals is investigated. • Waste generation is observed to increase over weekends and festivals. • Spatial modeling and thorough statistical analysis of the gathered data. • Dominated MSW contents are organics (Max = 87.05%) and plastics (Max = 12.67%). • Pearson analysis showed (+) correlation for WDF, WDPl and (−) correlations for WDPa, WDTe. [ABSTRACT FROM AUTHOR]

Clean energy transition via utilizing biomass resources has been projected as an important climate change mitigation strategy. A vital characteristic of biomass is its localized nature; therefore, bioenergy utilization should follow decentralized planning. Agrarian countries like India can take benefit of its large agricultural biomass waste pool to produce clean renewable energy. However, prior knowledge of spatio-temporal distribution, competing uses, and biomass characteristics are necessary for successful bioenergy planning. This paper assesses biomass resource and its power generation potential at different agro-climatic zone levels in the state of Rajasthan, India considering crop residue biomass (25 different crop residues from 14 crops) and livestock manure (from cattle, buffalo, and poultry). Uncertainties associated with the availability of biomass and the power generation potential are assessed for each agro-climatic zone under different scenarios. Greenhouse gases (GHGs) emissions from biomass-based power generations are also estimated and compared with biomass-equivalent coal power plants. It is observed that the annual biomass power potential of Rajasthan is 3056 MW (2496 MW from crop residues and 560 MW from livestock manure). Scenario analysis suggests that the potential varies from 2445 to 6045 MW under different biomass availability and power plant operating conditions. Annual GHGs emissions due to biomass power generation is 5053 kt CO 2 eq. Replacing coal-based power with biomass power would result in annual GHGs savings of 11412 kt CO 2 eq. The paper also discusses various carriers and barriers viz. logistics, institutional, financial and technical in setting up decentralized bioenergy plants. Outcomes of the present study are expected to assist renewable energy planners in India. • Biomass resources and their power potential are assessed for Rajasthan, India. •Biomass power potential for different selected scenario ranges from 2445-6045 MW. •GHG emissions from biomass power is assessed and compared with fossil fuels. •Spatio-temporal variability, low density and logistics are limitations of biomass. •Favourable policies, technologies and market can help to promote bioenergy sector. [ABSTRACT FROM AUTHOR]

The paper reports on an innovative application of dioxin-like persistent organic pollutants (dl-POPs) emission trends as a measure of environmental performance for designing feasible municipal solid waste management (MSWM) schemes. MSWM systems are highly dependent on the income status and the population density and it is quintessential for developing countries to devise strategies suiting to its characteristics rather than simply adapting successful processes/technologies in developed nations. Hence a lower-middle-income, high-density populated state of India – Kerala, which represents the typical scenario of majority of towns in developing countries was selected as the verification study site. Annual inventorisation of dl-POPs for the current scenario of the state was developed as a spatial model at the lowest administrative block level using geographical information system for the easy and effective comparative assessment. Further, a dl-POPs emission based MSWM scheme which could reduce up to 65% of emissions from current scenario has been developed and compared it with contemporary life cycle assessment (LCA) and life cycle cost analysis (LCCA) schemes in terms of green-house gas emissions (GHG) and landfill area requirements as environmental performance validation. Daily exposure dose of dl-POPs were predicted from the per-capita annual emission associated with different MSWM schemes and hazard quotients were also calculated to provide an overview of the health risk posed by the emissions. The predicted health risk factors were observed to be 5 times higher than the threshold level in current scenario whereas 10 times reduction in dose levels could be achieved through the proposed scheme of MSWM. [Display omitted] • Employed dl-POPs emission as a decision support tool for formulating MSWM scheme. • Verified the environmental performance in a typical developing country scenario. • 65% reduction in dl-POPs emission can be achieved through proposed scheme. • Spatial inventory of dl-POPs from MSWM activities has been prepared. • Average per-capita dose from proposed MSWM scheme was below the acceptable dose. [ABSTRACT FROM AUTHOR]

Impact of heavy metal (HM) pollution and its understanding on environment as well as human beings has grown a lot during the last few decades. The goal of this study is to create a scientometric study on heavy metal contamination, in the period 1989 to 2020, in order to provide futuristic goals for the new researchers on wastewater treatment. For this, a search was conducted in the Web of Science (WoS) and Scopus databases, related to heavy metal pollution. Totally, 37,154 records were collected during the study period from 1989 to 2020. The findings revealed that China, the United States, and India has most referenced papers across a wide range of trans disciplinary issues such as toxicity, technology, and pollution. As a result, this study concludes that more research on various treatment methods is required in order to obtain high-quality water for consumption and routine activities, with the incorporation of various treatment tasks poses various challenges for the upcoming future studies. [Display omitted] • A bibliometric study is performed an heavy metal pollution between 1989 and 2020. • 37,154 records were critically analyzed to extract the bibliographic maps. • China, USA and India are the leading countries in heavy metal pollution research. • Advanced oxidation, coagulation-flocculation, adsorption, and membrane filtering technologies were focussed. [ABSTRACT FROM AUTHOR]

Safety of sanitation workers remains an often-ignored aspect in Fecal Sludge Management. While shifting workers from manual to mechanical means of de-sludging remains a priority, this paper highlights that there are a number of safety issues, including exposure to sludge, faced by sanitation workers, even in a mechanised context, where de-sludging trucks are utilised to provide de-sludging services. Based on a detailed analysis of observation of stakeholders and extensive process documentation (of de-sludging process), and expert interviews, the study identified three key safety concerns: inhalation of harmful gases, contact with sludge, and physical injury, and determined the underlying cause for the same, using a systems thinking approach. These causes are varied including behaviours and practices by households such as non-compliance of septic tank construction to design standards, irregular cleaning, improper disposal of inappropriate items in toilets; inappropriate or inadequate design of decanting stations, tools and equipment, and inadequate awareness and knowledge among all stakeholders. Using the hierarchy of controls framework, a set of measures are described to increase the safety of workers. These proposed interventions go beyond the provision of Personal Protective Equipment (PPE), and range from behaviour change campaigns, improvements in decanting stations, better access to appropriately designed tools. The study highlights the need to place emphasis on eliminating, substituting and controlling the hazards as necessary steps for PPE to be relevant. Finally, the paper places the issue of occupational safety within the larger context of the informal nature of de-sludging occupation and the overall vulnerability of workers. It posits that this makes safety more complicated to address as several factors need to be taken into account, and actions are required by multiple sets of actors. • Safety concerns are prevalent even with mechanical desludging. • Key concerns are exposure to harmful gases, skin infections and physical injury. • hierarchy of control pyramid need to be addressed in totality. • Measures to improve worker safety must address existing processes and practices. • All stakeholders – households, workers, government are responsible to ensure safety. [ABSTRACT FROM AUTHOR]

The paper reports an update to the polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs) annual emission inventory of India from open burning of municipal solid wastes (MSW) through the generation of nation-specific emission factors for air (EF air) and burned residue (EF land) vectors. The MSW characteristics and modes of disposal practiced in Indian cities exhibits subtle variations from that of developed nations due to differences in food habits, living standards and climatic conditions. The annual emission calculations based on EFs from hitherto studies simulating conditions prevailing in developed countries can lead to anomalous accounting of emission levels. It is the first experimental study reported from Indian subcontinent to determine EFs of dioxins and dl-PCBs from MSW open burning by simulated combustion experiments conducted in a custom fabricated Open Burning Test Facility (OBTF) - "Burn Hut", using real dumpsite waste samples. Iso-kinetic sampling and coning and quartering methods were employed for the sampling of air and land emissions from combustion experiments. The PCDD/F's EF air ranged from 3 to 675 μg toxicity equivalence (TEQ)/ton of waste with a geometric mean (GM air) of 67.0 μgTEQ/ton and EF land ranged from 10 to 2531 μgTEQ/ton waste (GM land – 100.0 μgTEQ/ton). The EF air and EF land of dl-PCBs ranged from 0.5 to 46 μgTEQ/ton (GM air 7.0 μgTEQ/ton) and 0.5 to 96 μgTEQ/ton of waste (GM land 6.0 μgTEQ/ton) respectively. A detailed assessment of correlations between emission and MSW composition/combustion practices were conducted along with a comparative evaluation of EF present vis-à-vis EFs reported elsewhere. [Display omitted] • Critically evaluated the effect of Indian MSW composition on PCDD/F/dl-PCB emission. • Real dumpsite MSW were used for the determination of PCDD/F/dl-PCB emission factor. • Updated annual dioxin emission inventory of India from MSW open burning. • Isokinetic air sampling used in OBTF ensured better quantification of air emission. [ABSTRACT FROM AUTHOR]

Technological interventions and eco-innovative solutions are necessary to cope with the adverse environmental impacts of waste accumulation. The notion to consider "waste as a resource and recycling of the same for getting the value of the waste" has truly transformed the approach towards solid waste management (SWM). Technological eco-innovations rely on the automation of waste segregation, collection, route optimization, digital apps for creating communication (enhanced efficiency by 40–85%) and treatment technologies. The regulatory framework with amendments in rules, new policies, schemes, smart city missions are responsible for the implementation of "Tech-innovations" at the ground level and has shown societal benefits. India has significantly shown progress in sustainable development goals (SDGs) score from 50.93 to 60.23 (year 2000–2019). The innovative and sustainable waste management practices in India have increased contribution to renewable energy (approx. 2554 MW/annum), 15-billion-USD business opportunity by the circular economy, 25–30% resale profit from processed E-waste, increased co-operative collaborations, trailblazing start-ups, improved SDG 3,7,8,9,11,12,13, improved market for green products and services, brilliant institutional and regional innovations addressing the issue of climate change. The present article critically reviews the exemplary eco-innovations (technological and non-technological) including resource recovery and viable technologies for SWM in India. The review also illustrates the lacunae (in awareness, bioproducts adoption and advanced technologies), recommendations based on findings and future research areas. The paper can also assist researchers, entrepreneurs and the policy makers for improving the status of SWM in India as well as other developing countries with the same societal and economic status. [Display omitted] • Collated details of technological advancements for SWM in India. • Summarized eco-innovations in SWM and its impacts on societal economy and SDG. • Deliberated effects of digitization and collaborations in waste Management. • Trailblazing start-ups of India are also deeply elaborated with examples. [ABSTRACT FROM AUTHOR]

This article examines the structural aspects of climate vulnerabilities in the context of monsoon failures. The paper is based on a unique household survey, conducted in Tamil Nadu, India. The study uses a rural differentiation framework to interrogate unequal vulnerabilities to monsoon failures, based on measures such as Gini coefficients and Lorenz curves of monetary losses. Results show that negative consequences of climate change in general, and monsoon failures in particular, intensify pre-existing socio-economic disparities. When the rural differentiation theory is applied in a broader sense, the analysis shows that landed and farming households have greater exposure and losses. When we move beyond these aggregate categories, the revelation is that households with pre-existing disadvantages such as marginal landholders, subsistence farmers and agricultural workers are more vulnerable. • Global warming affects agriculture in South Asia in a major way through monsoon failures. • Vulnerability to monsoon failures can be measured by associated monetary losses. • These losses are highly unevenly distributed, pointing to significant inequality in impacts. • Landless households, marginal holders and subsistence farmers have higher losses. • Climate change intensifies existing structural disadvantages. [ABSTRACT FROM AUTHOR]

Globally, all countries have producing different levels of carbon emissions and also facing both the problems of climate change and global warming due high carbon emissions in the atmosphere. Therefore, it is important to cutting carbon emissions in the atmosphere. This is only possible by switching to cleaner fuels, use of innovation technologies and development of carbon capture storages. These can substantially help the nations to reaching carbon neutrality. Given this background, t his paper examines the effect of disaggregated energy consumption, technological innovations, capital on economic output and CO 2 emissions in India for the period of 1990–2018. Based on empirical analysis, our long-run elasticities indicate that disaggregated energy consumption and technological innovations have a positive impact on economic growth, while renewable energy consumption and technological innovations have a positive impact on CO 2 emissions. It implies that more use of energy consumption producing significant amount of CO 2 emissions and by using renewable energy consumption and technological innovations (i.e. carbon capture storages) can significantly lowering CO 2 emissions, which is clearly indicating that India has moving towards carbon neutrality. The causality analysis further indicates a unidirectional causal relationship running from disaggregated energy usage to economic growth and carbon emissions. These empirical findings suggest that the increased consumption of renewable power does not lead to rise carbon emissions, which, in turn, ensures sustainable economic growth. • Examines the disaggregated energy consumption, technological innovations, capital on economic output and CO 2 emissions. • Time series data from 1990 to 2018 was used to analyze the empirical results. • Disaggregated energy consumption and technological innovations have a positive impact on economic growth. • Renewable energy consumption and technological innovations have a positive impact on CO 2 emissions. • Suggest that increased in consumption of renewable power does not lead to rise carbon emissions. [ABSTRACT FROM AUTHOR]

Agriculture is one of the most important sectors in the Indian context. It is one of the highest employing sectors in the Indian scenario. Unlike other sectors agriculture is highly dependent on the quality and the quantity of both the external factors like rainfall, climate, pH of the soil, fertilizers and insecticides used, and internal factors like the quality of seeds. This paper predicts the production of crops as a function of rainfall for four Indian States. This knowledge can be implemented in generating a rough overview of how the production is based on rainfall and how much can a specific crop production for the amount of rainfall it receives. Two crops each belonging to four different states are chosen and the best regression model for the crop of the state is chosen. There is no research done solely on how rainfall affects crops of particular states. The proposed method of evaluation is better than other existing methods of evaluation as it evaluates all the regression techniques (Linear Regression, Polynomial Regression, Support Vector Regression, Decision Tree Regression, Random Forest, and XGBRegression) for two crops of four individual states. For balanced evaluation, two states of North India and two states of South India are selected. The regression techniques are evaluated based on their Mean Squared Error. • Crops of same species have different production rates within a same country. • Performance of each algorithm is different for crops within state. • Rainfall is the key determining factor for crop production in India. • Production of crop is affected by environment more than the genotype. • Predicting the production provides high impetus for developing economies. [ABSTRACT FROM AUTHOR]

This paper explores the features of accounting for the national carbon emission inventory under four different system boundaries, including the presently operational territorial production-based accounting (PBA) practised by the UNFCCC. Using a recently published input-output table with the base year for 2013–2014, the study calculates India's 'Nationally Determined Contribution (NDC)' to the mitigation of carbon emissions using production-based, consumption-based, sharing-based and equity-based accounting. The study finds India as a net importer of carbon emissions, especially for its high emission-intensive capital and energy goods import such that the country is bearing the minimum burden of emission reduction responsibility. However, the study intends to analyse this burden of responsibility in terms of the criteria of justice and effectiveness and addresses the future policy priorities for India to become a net exporter of industrial goods. We recommend India for supporting and implementing an alternative system boundary of emission inventory accounting which would be more consistent with the provisions of 'equity' subscribed under the UNFCCC while at the same time, helpful for achieving the climate goals by appropriately trace and track the sources of 'carbon leakage'. • We explore accounting features of the national carbon emission inventory in India. • India is a net importer of C O 2 emissions with less burden of emission responsibility. • Besides accounting of the emission inventory, the concept of 'emission responsibility' accommodates the criterion of 'justice' and 'effectiveness'. • The existing system boundary of emission inventory accounting could be an obstacle to achieve carbon-neutrality for India. • India must implement alternative system boundary of emission inventory accounting. [ABSTRACT FROM AUTHOR]