Search

This paper is concerned with the design of a dual-loop control system for permanent magnet synchronous motor (PMSM). An improved linear extended state observer (LESO) with excellent estimation capability is employed to develop an improved linear active disturbance rejection control (LADRC) suitable for PMSM speed regulation, achieving outstanding disturbance suppression in PMSM speed control. The use of an internal model control scheme to initialize the parameters of the proportional-integral- (PI-) based current controller simplifies the search space of the control system parameter optimization. An improved particle swarm optimization (PSO) algorithm is applied to optimize the controller parameters, thereby enhancing the overall system performance. Finally, through a series of simulations and experiments, we validate that our proposed controller exhibits superior performance compared to some other control methods. [ABSTRACT FROM AUTHOR]

Considering that in the process of job scheduling, the cluster load should be prebalanced rather than remedied when the load is seriously unbalanced; therefore, in this paper, the task scheduling flow of the Hadoop cluster is analyzed deeply. On the Hadoop platform, a self-dividing algorithm is proposed for load balancing. An intelligent optimization algorithm is used to solve load balance. A dynamic feedback load balancing scheduling method is proposed from the point of view of task scheduling. In order to solve the shortcoming of the fair scheduling algorithm, this paper proposes two ways to improve the resource utilization and overall performance of Hadoop. When the mapping task is completed and the tasks to be reduced are assigned, the task assignment is based on the performance of the nodes to be reduced. It gives full play to the advantages of the ant colony algorithm and the hive colony algorithm so that the fusion algorithm can better deal with load balance. Then, three existing scheduling algorithms are introduced in detail: single queue scheduling, capacity scheduling, and fair scheduling. On this basis, an improved task scheduling strategy based on genetic algorithm is proposed to allocate and execute application tasks to reduce task completion time. The experiment verifies the effectiveness of the algorithm. The LBNP algorithm greatly improves the efficiency of reducing task execution and job execution. The delay capacity scheduling algorithm can ensure that most tasks can achieve localization scheduling, improve resource utilization, improve load balance, and speed up job completion time. [ABSTRACT FROM AUTHOR]

Based on the theory and application, this paper discusses the optimization of art image segmentation algorithm based on FFNN (Feed Forward Neural Network). In this paper, residual units are used in the corresponding stages of encoder and decoder, and feature information of several convolution layers in each convolution stage of encoder is extracted at the same time. And the feature pyramid module is used to extract multiscale features from the feature map of the last convolution stage in the encoder. Finally, pixel by pixel additions combine the previously mentioned feature information into the corresponding layer of the decoder. Additionally, an improved weight adaptive algorithm based on feature preservation is suggested in this paper, which addresses the issue that the conventional image segmentation algorithm is noise-sensitive. The adaptive connection weight mechanism is also introduced. The accuracy and recall rates of this optimization algorithm can both reach 96.574%, according to the results of 50% cross-validation. All the segmentation performance evaluation indexes of this algorithm are higher than the existing main algorithms. Moreover, the algorithm takes a short time, does not need too much manual intervention, and can effectively segment artistic images. The optimization algorithm in this paper has certain reference significance for the related research of artistic image segmentation. [ABSTRACT FROM AUTHOR]

In order to effectively solve the problem that the radar detection system is difficult to detect the "low, small, slow" UAV, the high-performance computing early warning neural network is used to recognize the air UAV in real time and extract the target category and image space location information; the PSO algorithm is used to optimize the parameters of the anti-UAV to ensure that the anti-UAV not only relies on factors but also fully combines the dependence of the visual field factor to quickly obtain the optimal solution through analyzing the high-performance computing early warning neural network in this paper. This algorithm is used to initialize the anti-UAV resources and improve the global optimization capability of the algorithm proposed in this paper. Finally, the experimental results show that the proposed PSO algorithm has better high-performance computing early warning performance to meet the actual needs of network high-performance computing early-warning neural networks. [ABSTRACT FROM AUTHOR]

Attribute reduction is a popular topic in research on rough sets. In the classical model, much progress has been made in the study of the attribute reduction of indiscernibility and discernibility relations. To enhance the fault tolerance of the model, concepts of both indiscernibility and discernibility relations involving uncertain or imprecise information are proposed in this paper. The attribute reductions of the relative β -indiscernibility relation and relative β -discernibility relation and their algorithms are proposed. When the precision satisfies certain conditions, the reduction of two relation concepts can be converted into a positive region reduction. Therefore, the discernibility matrix is used to construct the reductions of the two relation concepts and the positive region. Furthermore, the corresponding algorithm of the relative β -indiscernibility (discernibility) relation reduction can be optimized when the precision is greater than 0.5, and this is used to develop an optimization algorithm that constructs the discernibility matrix more efficiently. Experiments show the feasibility of the two relation reduction algorithms. More importantly, the reduction algorithms of the two relations and the optimization algorithm are compared to demonstrate the feasibility of the optimization algorithm proposed in this paper. [ABSTRACT FROM AUTHOR]

Many important computational applications in science, engineering, industry, and technology are represented by PSE (parameter sweep experiment) applications. These applications involve a large number of resource-intensive and independent computational tasks. Because of this, cloud autoscaling approaches have been proposed to execute PSE applications on public cloud environments that offer instances of different VM (virtual machine) types, under a pay-per-use scheme, to execute diverse applications. One of the most recent approaches is the autoscaler MOEA (multiobjective evolutive algorithm), which is based on the multiobjective evolutionary algorithm NSGA-II (nondominated sorting genetic algorithm II). MOEA considers on-demand and spot VM instances and three optimization objectives relevant for users: minimizing the computing time, monetary cost, and spot instance interruptions of the application's execution. However, MOEA's performance regarding these optimization objectives depends significantly on the optimization algorithm used. It has been shown recently that MOEA's performance improves considerably when NSGA-II is replaced by a more recent algorithm named NSGA-III. In this paper, we analyze the incorporation of other multiobjective optimization algorithms into MOEA to enhance the performance of this autoscaler. First, we consider three multiobjective optimization algorithms named E-NSGA-III (extreme NSGA-III), SMS-EMOA (S-metric selection evolutionary multiobjective optimization algorithm), and SMPSO (speed-constrained multiobjective particle swarm optimization), which have behavioral differences with NSGA-III. Then, we evaluate the performance of MOEA with each of these algorithms, considering the three optimization objectives, on four real-world PSE applications from the meteorology and molecular dynamics areas, considering different application sizes. To do that, we use the well-known CloudSim simulator and consider different VM types available in Amazon EC2. Finally, we analyze the obtained performance results, which show that MOEA with E-NSGA-III arises as the best alternative, reaching better and significant savings in terms of computing time (10%–17%), monetary cost (10%–40%), and spot instance interruptions (33%–100%). [ABSTRACT FROM AUTHOR]

This paper solves the shortcomings of sparrow search algorithm in poor utilization to the current individual and lack of effective search, improves its search performance, achieves good results on 23 basic benchmark functions and CEC 2017, and effectively improves the problem that the algorithm falls into local optimal solution and has low search accuracy. This paper proposes an improved sparrow search algorithm based on iterative local search (ISSA). In the global search phase of the followers, the variable helix factor is introduced, which makes full use of the individual's opposite solution about the origin, reduces the number of individuals beyond the boundary, and ensures the algorithm has a detailed and flexible search ability. In the local search phase of the followers, an improved iterative local search strategy is adopted to increase the search accuracy and prevent the omission of the optimal solution. By adding the dimension by dimension lens learning strategy to scouters, the search range is more flexible and helps jump out of the local optimal solution by changing the focusing ability of the lens and the dynamic boundary of each dimension. Finally, the boundary control is improved to effectively utilize the individuals beyond the boundary while retaining the randomness of the individuals. The ISSA is compared with PSO, SCA, GWO, WOA, MWOA, SSA, BSSA, CSSA, and LSSA on 23 basic functions to verify the optimization performance of the algorithm. In addition, in order to further verify the optimization performance of the algorithm when the optimal solution is not 0, the above algorithms are compared in CEC 2017 test function. The simulation results show that the ISSA has good universality. Finally, this paper applies ISSA to PID parameter tuning and robot path planning, and the results show that the algorithm has good practicability and effect. [ABSTRACT FROM AUTHOR]

Aiming at the problems existing in the traditional teaching mode, this paper intelligently optimizes English teaching courses by using multidirectional mutation genetic algorithm and its optimization neural network method. Firstly, this paper gives the framework of intelligent English course optimization system based on multidirectional mutation genetic BP neural network and analyses the local optimization problems existing in the traditional BP algorithm. A BP neural network optimization algorithm based on multidirectional mutation genetic algorithm (MMGA-BP) is presented. Then, the multidirectional mutation genetic BPNN algorithm is applied to the intelligent optimization of English teaching courses. The simulation shows that the multidirectional mutation genetic BP neural network algorithm can solve the local optimization problem of traditional BP neural network. Finally, a control group and an experimental group are set up to verify the role of multidirectional mutation genetic algorithm and its optimization neural network in the intelligent optimization system of English teaching courses through the combination of summative and formative teaching evaluations. The data show that MMGA-BP algorithm can significantly improve the scores of academic students in English courses and has better teaching performance. The effect of vocabulary teaching under the guidance of MMGA-BP optimization theory is very significant, which plays a certain role in the intelligent curriculum optimization of the experimental class. [ABSTRACT FROM AUTHOR]

The photovoltaic(PV) system's efficiency can be improved with the aid of effective solar PV cell modeling. However, flawed solar cell parameters affect PV cell modeling incorrectly. The manufacturers are usually not providing all the necessary data for the exact modeling of PV cells. It is therefore necessary to efficiently predict the parameters of the PV cell. The literature discusses various optimization algorithms, but the suboptimal outcomes are obtained by most of the algorithms due to their convergence toward local minima. This paper introduces a new stochastic optimization algorithm for the estimation of solar PV cell parameters. Therefore, for the evaluation of the solar cell, a new novel chaotic algorithm is introduced in this paper called the chaotic tunicate swarm algorithm (CTSA). The proposed algorithm has a new function called an outstanding mathematical model of adaptive weights to stimulate negative and positive inputs from the spreading wave in order to find the best way to connect food with an excellent exploitation tendency and exploratory ability. For the double‐diode model, the computation time of the chaotic variants (CTSA1‐1.1885, CTSA2‐1.2502, CTSA3‐1.2962, CTSA4‐1.1204, and CTSA5‐1.2214) is better than the rest of the compared algorithms (particle swarm optimization [PSO]‐17.4532, tunicate swarm algorithm (TSA)‐2.5278, Harris hawks optimization [HHO]‐10.8942, ant lion optimizer [ALO]‐15.0214, and atom search optimization [ASO]‐9.5214). For the triple‐diode model, the computation time of the chaotic variants (CTSA1‐1.2658, CTSA2‐1.3520, CTSA3‐1.3056, CTSA4‐1.2290, and CTSA5‐1.3859) is better than the rest of the compared algorithms (PSO‐18.5421, TSA‐3.2568, HHO‐9.8754, ALO‐13.5841, and ASO‐11.8412). The superiority of proposed algorithm is established using ranking test, statistical error analysis, and sensitivity temperature variation. [ABSTRACT FROM AUTHOR]

In order to improve the effect of classroom teaching and realize the improvement of mathematics teaching quality, this article combines data-driven decision-making technology to design a mathematics teaching plan system and applies data-driven decision-making technology to the design of mathematics teaching plan by improving the big data algorithm. In addition, this paper designs a mathematics teaching plan design system based on data-driven decision-making technology. The system learning module displays the knowledge points in a chapter-sequential navigation mode and stores data or information in the nodes, which are connected to form a network structure through chains. Finally, this paper verifies the designed system with experiments. From the results of the experimental research data, it can be seen that the mathematical teaching plan design system based on the data-driven decision-making technology constructed in this article has good practical effects. On this basis, the system constructed in this article can be verified through further practice. [ABSTRACT FROM AUTHOR]

The decomposition-based algorithm, for example, multiobjective evolutionary algorithm based on decomposition (MOEA/D), has been proved effective and useful in a variety of multiobjective optimization problems (MOPs). On the basis of MOEA/D, the MOEA/D-DE replaces the simulated binary crossover (SBX) operator with differential evolution (DE) operator, which is used to enhance the diversity of the solutions more effectively. However, the amplification factor and the crossover probability are fixed in MOEA/D-DE, which would lead to a low convergence rate and be more likely to fall into local optimum. To overcome such a prematurity problem, this paper proposes three different adaptive operators in DE with crossover probability and amplification factors to adjust the parameter settings adaptively. We incorporate these three adaptive operators in MOEA/D-DE and MOEA/D-PaS to solve MOPs and many-objective optimization problems (MaOPs), respectively. This paper also designs a sensitive experiment for the changeable parameter η in the proposed adaptive operators to explore how η would affect the convergence of the proposed algorithms. These adaptive algorithms are tested on many benchmark problems, including ZDT, DTLZ, WFG, and MaF test suites. The experimental results illustrate that the three proposed adaptive algorithms have better performance on most benchmark problems. [ABSTRACT FROM AUTHOR]

Recent advancements in computer science include some optimization models that have been developed and used in real applications. Some metaheuristic search/optimization algorithms have been tested to obtain optimal solutions to speed controller applications in self-driving cars. Some metaheuristic algorithms are based on social behaviour, resulting in several search models, functions, and parameters, and thus algorithm-specific strengths and weaknesses. The present paper proposes a fitness function on the basis of the mathematical description of proportional integrative derivate controllers showing that mean square error is not always the best measure when looking for a solution to the problem. The fitness developed in this paper contains features and equations from the mathematical background of proportional integrative derivative controllers to calculate the best performance of the system. Such results are applied to quantitatively evaluate the performance of twenty-one optimization algorithms. Furthermore, improved versions of the fitness function are considered, in order to investigate which aspects are enhanced by applying the optimization algorithms. Results show that the right fitness function is a key point to get a good performance, regardless of the chosen algorithm. The aim of this paper is to present a novel objective function to carry out optimizations of the gains of a PID controller, using several computational intelligence techniques to perform the optimizations. The result of these optimizations will demonstrate the improved efficiency of the selected control schema. [ABSTRACT FROM AUTHOR]

Summary: Automatic generation control (AGC) plays a crucial role in modern power system to control the frequency with change in power demand. A novel fractional order (FO) hybrid PID‐fuzzy‐PID (FO‐hPID‐FPID) controller is proposed in this paper as the secondary controller for AGC of a three unequal area interconnected nonlinear reheat thermal power system considering generation rate constraint. This paper also deals with the implementation of FO fuzzy PID (FOFPID) and FO PID (FOPID) controllers in addition to the proposed controller along with their counterpart integer order controllers to establish the dominance of FO controllers over integer order controllers. Various parameters of the controllers are optimized by hybridizing two global optimization techniques: particle swarm optimization and modified sine cosine algorithm (MSCA) and the optimization techniques so obtained is called as hybrid PSO‐MSCA (hPSO‐MSCA) technique. A step load perturbation of 0.01 p.u. is injected in area‐1, and the system response is investigated independently with different controllers. It is revealed that the proposed FO‐hPID‐FPID delivers superior performance than the other controllers. Sensitivity analysis for parametric variations is carried out, and random load test is performed to validate the robustness of the proposed controller. Further, it is observed that the controllers deliver result in an ascending order of control performance as PID, FOPID, FPID, FOFPID, hPID‐FPID and FO‐hPID‐FPID controllers with FO‐hPID‐FPID controller delivering the best result and the FO controllers deliver better control performance than their integer order counterparts. [ABSTRACT FROM AUTHOR]

At present, there are some problems in the process of human motion recognition, such as poor timeliness and low fault tolerance rate. How to effectively identify the motion process accurately has become a hot spot in the optimization system. In the existing research studies, the recognition accuracy is not very good and the response time is long. To end this issue, the paper proposed an information processing system and optimization method of human motion recognition based on the GA-BP neural network algorithm. Firstly, a human motion recognition system based on dynamic capture recognition technology is designed, which realizes the recognition of motion information from common postures such as action span, speed change, motion trajectory, and other aspects in the process of human motion. Secondly, the proposed algorithm is used to comprehensively analyse and evaluate the motion state. Finally, experiments are designed to verify and analyse the results. Compared to some baseline methods in human motion recognition information systems, the system in this paper based on the GA-BP neural network algorithm has the advantages of higher data accuracy and response speed, which can quickly and accurately identify the muscle group change in the process of human motion, and it can also provide customized motion suggestions based on the results. [ABSTRACT FROM AUTHOR]

The deep Q-network (DQN) is one of the most successful reinforcement learning algorithms, but it has some drawbacks such as slow convergence and instability. In contrast, the traditional reinforcement learning algorithms with linear function approximation usually have faster convergence and better stability, although they easily suffer from the curse of dimensionality. In recent years, many improvements to DQN have been made, but they seldom make use of the advantage of traditional algorithms to improve DQN. In this paper, we propose a novel Q-learning algorithm with linear function approximation, called the minibatch recursive least squares Q-learning (MRLS-Q). Different from the traditional Q-learning algorithm with linear function approximation, the learning mechanism and model structure of MRLS-Q are more similar to those of DQNs with only one input layer and one linear output layer. It uses the experience replay and the minibatch training mode and uses the agent's states rather than the agent's state-action pairs as the inputs. As a result, it can be used alone for low-dimensional problems and can be seamlessly integrated into DQN as the last layer for high-dimensional problems as well. In addition, MRLS-Q uses our proposed average RLS optimization technique, so that it can achieve better convergence performance whether it is used alone or integrated with DQN. At the end of this paper, we demonstrate the effectiveness of MRLS-Q on the CartPole problem and four Atari games and investigate the influences of its hyperparameters experimentally. [ABSTRACT FROM AUTHOR]

Most of the current algorithms for solving distributed online optimization problems are based on the first-order method, which are simple in computation but slow in convergence. Newton's algorithm with fast convergence speed needs to calculate the Hessian matrix and its inverse, leading to computationally complex. A distributed online optimization algorithm based on Newton's step is proposed in this paper, which constructs a positive definite matrix by using the first-order information of the objective function to replace the inverse of the Hessian matrix in Newton's method. The convergence of the algorithm is proved theoretically and the regret bound of the algorithm is obtained. Finally, numerical experiments are used to verify the feasibility and efficiency of the proposed algorithm. The experimental results show that the proposed algorithm has an efficient performance on practical problems, compared to several existing gradient descent algorithms. [ABSTRACT FROM AUTHOR]

Feature selection provides the optimal subset of features for data mining models. However, current feature selection methods for high-dimensional data also require a better balance between feature subset quality and computational cost. In this paper, an efficient hybrid feature selection method (HFIA) based on artificial immune algorithm optimization is proposed to solve the feature selection problem of high-dimensional data. The algorithm combines filter algorithms and improves clone selection algorithms to explore the feature space of high-dimensional data. According to the target requirements of feature selection, combined with biological research results, this method introduces the lethal mutation mechanism and the Cauchy operator to improve the search performance of the algorithm. Moreover, the adaptive adjustment factor is introduced in the mutation and update phases of the algorithm. The effective combination of these mechanisms enables the algorithm to obtain a better search ability and lower computational costs. Experimental comparisons with 19 state-of-the-art feature selection methods are conducted on 25 high-dimensional benchmark datasets. The results show that the feature reduction rate for all datasets is above 99%, and the performance improvement for the classifier is between 5% and 48.33%. Compared with the five classical filtering feature selection methods, the computational cost of HFIA is lower than the two of them, and it is far better than these five algorithms in terms of the feature reduction rate and classification accuracy improvement. Compared with the 14 hybrid feature selection methods reported in the latest literature, the average winning rates in terms of classification accuracy, feature reduction rate, and computational cost are 85.83%, 88.33%, and 96.67%, respectively. [ABSTRACT FROM AUTHOR]

In this article, a novel methodology has been created based on optimized fuzzy PI controller using position control optimization (PCO). This proposed PCO algorithm ensures better control of brushless direct current motor (BLDCM) in order to reduce steady-state error and oscillation as well as improve the system response by optimizing the speed and position of rotor. The suitability of this technique has been simulated in different stages, so as to infer the optimization in results. The main motivation of this paper is to get better efficiency and optimum response from BLDCM, by comparing its performance characteristics with existing methods. The detailed investigation research through simulation is carried out using MATLAB/Simulink. However, in order to obtain well-defined results, the PCO technique was applied and the performance obtained was highly optimized than previously applied techniques. Through the simulations, the proposed approach can outperform the existing approaches such as PSO and moth-flame algorithm (MFA). [ABSTRACT FROM AUTHOR]

In intelligent warehouse, the problem of transporting goods in intelligent warehouse is becoming increasingly complex, and the traditional way of automatically guiding vehicles (AGVs) is inefficient, so automated robot systems are introduced into intelligent warehouses. In this paper, a task assignment model for robots is presented with the transportation problem of robots in intelligent warehouse as the research background. To solve the robot task assignment problem in intelligent warehouse, a novel Pareto-based multiobjective optimization algorithm (MOEA) is proposed, and the aggregation function is invoked to replace the crowding distance; the brain storm operator is used for crossover and mutation. Finally, the ability of the algorithm to solve the benchmark test problem suite and real-world problems is experimentally confirmed. [ABSTRACT FROM AUTHOR]

In the financial industry, it is of great significance to study the multiobjective portfolio optimization for obtaining a reasonable investment strategy. This paper designs the financial portfolio scheme based on the multiobjective optimization algorithm that is based on the framework of the NSGA-II algorithm. In order to introduce convergence information, aiming at the actual problem of the portfolio, the mixed individual coding mechanism with asset information expands the application of the multiobjective evolutionary algorithm in portfolio optimization. The portfolio scheme obtained is effective, which is helpful to improve the decision-making efficiency of financial investors and enriches the application of modern financial theory. [ABSTRACT FROM AUTHOR]

Strong ground clutter echoes make it difficult to detect low-altitude slow-speed small (LSS) targets. To suppress ground clutter effectively in LSS target detection, a robust transmit beamforming algorithm has been proposed in this paper. Sidelobes in the ground side can be cut down, with the excess energy concentrated on the air side, which would be cleaner and simpler. The objective function is a second-order cone programming problem and can be solved by the convex optimization algorithm. With the consideration of taking full advantage of transmit power, the weight vector is further processed under the unimodular constraint. Numerical experiments are carried out to demonstrate the validity and superiority of the proposed method. [ABSTRACT FROM AUTHOR]

Many optimization algorithms have been applied to solve high-dimensional instances of the 0-1 knapsack problem. However, these algorithms often fall into a local optimization trap and thus fail to obtain the global optimal solutions. To circumvent this shortcoming, a hybrid harmony search algorithm with distribution estimation is proposed in this paper. A few important features of the proposed algorithm are as follows: (i) the idea of probability distribution estimation is employed to design the adaptive search strategy, (ii) a fixed improvisation process is presented to improve the algorithm searching ability, (iii) a new method of initialization is used to ensure that the initialization is feasible harmony and (iv) an improved remediation approach is proposed to effectively repair the infeasible solutions. To assess the effectiveness of the proposed algorithm, some experiments are carried out. The experimental results reveal that the proposed algorithm is a reliable and promising alternative for solving the 0-1 knapsack problem. [ABSTRACT FROM AUTHOR]

It is well known that we, as human beings, are prone to a variety of undesirable emotions such as excitement, boredom, and fear, all of which are induced by varying degrees of negative states. In this paper, we designed an emotion-evoking experiment to induce calm, excited, bored, and fearful emotions, as well as low, moderate, and high levels of tension. Based on the six physiological signals such as heart rate and respiration rate of the subjects in these emotion states, feature extraction was performed after removing the baseline preprocessing, combined with particle swarm optimisation algorithm for feature selection, and the k-nearest neighbour algorithm was used to classify the different emotion and tension levels in the undesirable states. By comparing the results of several sets of experiments, we found that with baseline removal and particle swarm feature selection optimisation, our experimental results using k-nearest neighbour classification showed a significant improvement in recognition accuracy compared to the traditional k-nearest neighbour algorithm, which indicates that the proposed method has better recognition results. [ABSTRACT FROM AUTHOR]

Most of the traditional tourism route planning algorithms only consider single-factor planning, that is, the influence of scenic spots on route planning. Particle swarm optimization algorithm is favored by many people because of its simple concept, easy implementation, and good robustness. Aiming at this problem, this paper takes the actual geographic data as the research object of the tourism route problem and describes the model of the discrete particle swarm algorithm based on geographic coordinates to solve the tourism route problem, which is used to solve practical problems. In order to further improve the global search ability of the algorithm, a self-balancing mechanism is proposed, which makes the algorithm process simple and the algorithm performance improved. At the same time, multithread parallelism is adopted to improve the solution speed of the algorithm, which makes up for the deficiency of the parallelization research of the algorithm. [ABSTRACT FROM AUTHOR]

In the process of 3D printing, the setting of the initial layer is the most important step to achieve perfect printing results, and its main function is to prevent warping in 3D printing. There are three main types of the first layer: Raft, Brim, and Skirt. The Brim is a special skirt and is usually the preferred starting layer for the printing process. In order to increase the adhesion, multiple Brim contour edges will be printed, which increases the difficulty of removal. Otherwise, poor adhesion effect will occur. By analyzing the distinction between inner and outer contours of polygons, the offset process of contour points in different cases is calculated in this paper, and a simplified processing method of contour offset line is designed by using the idea of Douglas–Peucker simplifying curve feature points. According to the functional characteristics of the Brim edge structure, a novel platform attached support structure is generated based on ray-casting algorithm and contour offset algorithm. The proposed algorithm is encapsulated into the slicing engine and compared with three common initial layer structures for conducting part printing comparison experiments. The experimental results show that the edge structure realized by the proposed generation optimization algorithm of a novel platform attached support can effectively reduce the slicing execution time, and the auxiliary structure has little impact on the forming quality. It can be easier to remove on the premise and the warpage of the printing model is small. [ABSTRACT FROM AUTHOR]

Innovation and institutional governance are the key enabling factors of cluster ecosystem development. Its synergistic effects play an important role in enhancing ecosystem competitiveness. In this paper, pseudocode language is applied to cluster ecosystem cooperative model reasoning. The coordination and optimization of the innovation system and institutional governance system were studied in a biomedical cluster. Besides, Pearson algorithm was used to test the correlation degree of elements in three Chinese biomedical clusters. The results show that, in Zhangjiang and Nanchang biomedical clusters, the synergistic correlation coefficient between the innovation system and the institutional governance system fluctuates around 0.8. However, in Tonghua biomedical cluster, the synergy correlation coefficient fluctuated around -0.2. The fluctuation range between the two clusters was large. After adjusting the range of order parameters, the rank of synergy trend was Zhangjiang > Nanchang > Tonghua. Finally, further analysis shows that Zhangjiang and Nanchang biomedical clusters can achieve the optimal synergy state by adjusting innovation and institutional governance, but Tonghua cannot. Therefore, the collaboration between the innovation system and institutional governance system provides some reference for the high-quality development of the cluster ecosystem. [ABSTRACT FROM AUTHOR]

Slime mould algorithm (SMA) is a population-based metaheuristic algorithm inspired by the phenomenon of slime mould oscillation. The SMA is competitive compared to other algorithms but still suffers from the disadvantages of unbalanced exploitation and exploration and is easy to fall into local optima. To address these shortcomings, an improved variant of SMA named MSMA is proposed in this paper. Firstly, a chaotic opposition-based learning strategy is used to enhance population diversity. Secondly, two adaptive parameter control strategies are proposed to balance exploitation and exploration. Finally, a spiral search strategy is used to help SMA get rid of local optimum. The superiority of MSMA is verified in 13 multidimensional test functions and 10 fixed-dimensional test functions. In addition, two engineering optimization problems are used to verify the potential of MSMA to solve real-world optimization problems. The simulation results show that the proposed MSMA outperforms other comparative algorithms in terms of convergence accuracy, convergence speed, and stability. [ABSTRACT FROM AUTHOR]

A decentralized control strategy can effectively solve the control problem of the large-scale time delayed structures. In this paper, combining the overlapping decentralized control method, linear matrix inequality (LMI) method, and H∞ control algorithm, overlapping decentralized H∞ control approach of the time delayed structures has been established. The feedback gain matrixes of all subsystems are obtained by this method based on genetic algorithm optimization tools and the specific goal of optimization control. The whole vibration control system of the time delayed structures is divided into a series of overlapping subsystems by overlapping decentralized control strategy. The feedback gain matrixes of each subsystem can be obtained by using H∞ control algorithm to calculate each subsystem. The vibration control of a twenty layers' antiseismic steel structure Benchmark model was analyzed with the numerical method. The results show that the proposed method can be applied to control system with time delay. The overlapping decentralized control strategies acquire the similar control effects with that of the centralized control strategy. Moreover, the flexibility of the controller design has been enhanced by using overlapping decentralized control strategies. [ABSTRACT FROM AUTHOR]

Summary: This paper addresses the allocation of a hybrid system that includes PV‐DG and DSTATCOM. The planning problem considers the variations of load demand and solar irradiance under deterministic and probabilistic conditions. An efficient optimization algorithm called MPA is implemented to assign the optimal placement and ratings of the hybrid PV‐DG and DSTATCOM. The considered objective function is a multi‐objective function that includes the annual cost reduction, improvement of voltage profiles, and system stability improvement. The assessment is accomplished with the inclusion of a single and two‐hybrid system on a large 94‐bus system. For validating the effectiveness of the MPA, the yielded results are compared with the PSO, which is considered a commonly used algorithm. In deterministic conditions, the hourly variations of the load demand and solar radiation are considered in four yearly seasons, while in probabilistic conditions, 3 years of hourly historical data of solar irradiance and load demand are utilized to describe the uncertainties of the load demand and solar irradiance. The simulation results demonstrate that the optimal inclusion of a single‐hybrid PV‐DG and DSTATCOM system can enhance the system's technical performance (the voltage profile, the voltage stability) and enhance the economic scheme (total annual cost reduction). In addition, the inclusion of two‐hybrid systems is superior compared with the inclusion of a single‐hybrid system in terms of the considered objective functions, as well as the proposed technique is more efficient for solving the allocation problem of the hybrid system. [ABSTRACT FROM AUTHOR]

Influence maximization (IM) is fundamental to social network applications. It aims to find multiple seed nodes with an enormous impact cascade to maximize these nodes' spread of influence in social networks. Traditional methods for solving influence maximization of the social network, such as the distance method, greedy method, and PageRank method, may suffer from issues of low calculation accuracy and high computational cost. In this paper, we propose a new bacterial foraging optimization algorithm to solve the IM problem based on the complete-three-layer-influence (CTLI) evaluation model. In this algorithm, a novel grid-based reproduction strategy and a direction-adjustment-based chemotaxis strategy are devised to enhance the algorithm's searchability. Finally, we conduct comprehensive experiments on four social network cases to verify the effectiveness of the proposed algorithm. The experimental results show that our proposed algorithm effectively solves the social network's influence maximization. [ABSTRACT FROM AUTHOR]

Influence maximization (IM) is fundamental to social network applications. It aims to find multiple seed nodes with an enormous impact cascade to maximize these nodes' spread of influence in social networks. Traditional methods for solving influence maximization of the social network, such as the distance method, greedy method, and PageRank method, may suffer from issues of low calculation accuracy and high computational cost. In this paper, we propose a new bacterial foraging optimization algorithm to solve the IM problem based on the complete-three-layer-influence (CTLI) evaluation model. In this algorithm, a novel grid-based reproduction strategy and a direction-adjustment-based chemotaxis strategy are devised to enhance the algorithm's searchability. Finally, we conduct comprehensive experiments on four social network cases to verify the effectiveness of the proposed algorithm. The experimental results show that our proposed algorithm effectively solves the social network's influence maximization. [ABSTRACT FROM AUTHOR]

Cloud computing platforms have been extensively using scientific workflows to execute large-scale applications. However, multiobjective workflow scheduling with scientific standards to optimize QoS parameters is a challenging task. Various metaheuristic scheduling techniques have been proposed to satisfy the QoS parameters like makespan, cost, and resource utilization. Still, traditional metaheuristic approaches are incompetent to maintain agreeable equilibrium between exploration and exploitation of the search space because of their limitations like getting trapped in local optimum value at later evolution stages and higher-dimensional nonlinear optimization problem. This paper proposes an improved Fruit Fly Optimization (IFFO) algorithm to minimize makespan and cost for scheduling multiple workflows in the cloud computing environment. The proposed algorithm is evaluated using CloudSim for scheduling multiple workflows. The comparative results depict that the proposed algorithm IFFO outperforms FFO, PSO, and GA. [ABSTRACT FROM AUTHOR]

Financial early warning mechanism is of great significance to the long-term healthy development and stable operation of listed enterprises. This paper adopts the logistic regression early warning model and BP neural network early warning model. Based on the BP neural network t early warning model optimized by the simulated annealing algorithm, the prediction effects of the model are compared from the perspectives of model accuracy and variable importance. Through the comparative analysis of the empirical results of the three methods, it can be seen that the simulated annealing algorithm has many advantages. The combination of the simulated annealing algorithm with multithreading, data compression, and segmentation greatly improves the efficiency of the algorithm and shortens the running time. Using the logistic regression early warning model and BP neural network early warning model and based on the BP neural network t early warning model optimized by the simulated annealing algorithm, the prediction effects of the model are compared from the perspective of model accuracy and variable importance. The results show that the three index dimensions of the BP neural network optimized by the simulated annealing algorithm have good discrimination ability to financial status. The BP neural network early warning model optimized based on the simulated annealing algorithm has good prediction accuracy and good practical significance. [ABSTRACT FROM AUTHOR]

Most network pruning methods rely on rule-of-thumb for human experts to prune the unimportant channels. This is time-consuming and can lead to suboptimal pruning. In this paper, we propose an effective SuperPruner algorithm, which aims to find optimal pruned structure instead of pruning unimportant channels. We first train a VerifyNet, a kind of super network, which is able to roughly evaluate the performance of any given network structure. The particle swarm optimization algorithm is then used to search for optimal network structure. Lastly, the weights in the VerifyNet are used as the initial weights of the optimal pruned structure to make fine-tuning. VerifyNet is a network performance evaluation; our algorithm can quickly prune the network under any hardware constraints. Our algorithm can be applied in multiple fields such as object recognition and semantic segmentation. Extensive experiment results demonstrate the effectiveness of SuperPruner. For example, on CIFAR-10, the pruned VGG16 achieves 93.18% Top-1 accuracy and reduces 74.19% of FLOPs and 89.25% of parameters. Compared with state-of-the-art methods, our algorithm can achieve higher pruned ratio with less accuracy cost. [ABSTRACT FROM AUTHOR]

In the context of cloud computing, one problem that is frequently encountered is task scheduling. This problem has two primary implications, which are the planning of tasks on virtual machines and the attenuation of performance. In order to address the problem of task scheduling in cloud computing, requisite nontraditional optimization attitudes to attain the optima of the problem, the present paper puts forth a hybrid multiple-objective approach called hybrid grey wolf and whale optimization (HGWWO) algorithms, that integrates two algorithms, namely, the grey wolf optimizer (GWO) and the whale optimization algorithm (WOA), with the purpose of conjoining the advantages of each algorithm for minimizing costs, energy consumption, and total execution time needed for task implementation, beside that improving the use of resources. Assessment of the aims of the proposed approach is carried out with the help of the tool known as CloudSim. As pointed out by the results of the experimental work undertaken, the proposed approach has the capability of performing at a superior level by comparison to the original algorithms GWO and WOA on their own with regard to costs, energy consumption, makespan, use of resources, and degree of imbalance. [ABSTRACT FROM AUTHOR]

Based on Salp Swarm Algorithm (SSA) and Slime Mould Algorithm (SMA), a novel hybrid optimization algorithm, named Hybrid Slime Mould Salp Swarm Algorithm (HSMSSA), is proposed to solve constrained engineering problems. SSA can obtain good results in solving some optimization problems. However, it is easy to suffer from local minima and lower density of population. SMA specializes in global exploration and good robustness, but its convergence rate is too slow to find satisfactory solutions efficiently. Thus, in this paper, considering the characteristics and advantages of both the above optimization algorithms, SMA is integrated into the leader position updating equations of SSA, which can share helpful information so that the proposed algorithm can utilize these two algorithms' advantages to enhance global optimization performance. Furthermore, Levy flight is utilized to enhance the exploration ability. It is worth noting that a novel strategy called mutation opposition-based learning is proposed to enhance the performance of the hybrid optimization algorithm on premature convergence avoidance, balance between exploration and exploitation phases, and finding satisfactory global optimum. To evaluate the efficiency of the proposed algorithm, HSMSSA is applied to 23 different benchmark functions of the unimodal and multimodal types. Additionally, five classical constrained engineering problems are utilized to evaluate the proposed technique's practicable abilities. The simulation results show that the HSMSSA method is more competitive and presents more engineering effectiveness for real-world constrained problems than SMA, SSA, and other comparative algorithms. In the end, we also provide some potential areas for future studies such as feature selection and multilevel threshold image segmentation. [ABSTRACT FROM AUTHOR]