Search

This work deals with the investigation and characterization of Ti6Al4V parts produced with an intriguing manufacturing process belonging to the Wire Arc Additive Manufacturing (WAAM) family: the Cold Metal Transfer technology (CMT). Wall‐shaped parts were produced according to different process parameters, namely the wire feed speed and voltage–current combinations, leading to different energy inputs. The parts were characterized in terms of surface morphology, microhardness, microstructure, tensile properties, and fatigue crack growth. The results suggested that the investigated deposition parameters led to similar results. Moreover, the mechanical and fatigue crack growth behavior was in line with parts of the same alloy produced through other manufacturing routes, whereas the microstructure type was the result of the fast cooling of the molten material. Finally, considering the simple system adopted to avoid oxidation during the deposition stage, the results suggested that CMT is a promising manufacturing technique for titanium alloy semifinished parts. Highlights: Wall‐like parts made of Ti6Al4V alloy were produced through WAAM‐CMT technologySound parts with minimum oxidation were produced through a simple enveloping systemThe parts had properties similar to those of more traditional manufacturing routesThe microstructure, tensile, and fatigue crack growth behavior were quite isotropic [ABSTRACT FROM AUTHOR]

The recent improvement of additive manufacturing (AM) technologies has been attracting the industry and research community attention. This paper aims to investigate the influence of building position and printing scheme on the tensile mechanical properties of Tough polylactic acid (PLA) material, manufactured through a fused deposition modeling (FDM) 3D printing – the S5 ProBundle Ultimaker. FDM 3D printing, also known as fused filament fabrication (FFF), is an AM process within the realm of material extrusion. FDM builds parts Layer by Layer by selectively depositing melted material in a predetermined path, and uses thermoplastic polymers that come in the form of filaments. In this paper, AM Tough PLA specimens are manufactured according to ASTM‐D638 requirement considering two different positions on the building plate and two printing schemes. Specimens are tested under static tensile test and the mechanical properties are extracted. [ABSTRACT FROM AUTHOR]