Search

The rapid development of miniaturized, high-frequency, and highly integrated microelectronic devices has brought about critical issues in electromagnetic compatibility and thermal management. In recent years, there has been significant interest in lightweight polymer-based composites that offer both electromagnetic interference (EMI) shielding and thermal conductivity. One promising approach involves constructing three-dimensional (3D) interconnection networks using functional fillers in the polymer matrix. These networks have been proven effective in enhancing the thermal and electrical conductivity of the composites. This mini-review focuses on the preparation and properties of 3D network-reinforced polymer composites, specifically those incorporating metal, carbon, ceramic, and hybrid networks. By comparing the effects of different filler types and distribution on the composite materials, the advantages of 3D interconnected conductive networks in polymer composites are highlighted. Additionally, this review addresses the challenges faced in the field of multifunctional thermal management and electromagnetic protection materials and provides insights into future development trends and application prospects of 3D structured composites. [ABSTRACT FROM AUTHOR]

• MXene/AgNWs aerogels with interpenetrating double-network structure were fabricated. • The porous structure contributes to higher attenuation of electromagnetic waves. • 3D network provides channel for electron and phonon transmission in epoxy composites. • The composites possess remarkable EMI SE and thermal conductivity. The novel multifunctional materials with anti-electromagnetic interference (EMI) and effective thermal management are ideal for modern electronic industry. Generally, the EMI shielding effectiveness (SE) and thermal conductivity (TC) of materials can be effectively enhanced by compounding with high electrically and thermally conductive fillers. However, it seems that the high-performance cannot be compensated without sacrificing the high fillers loading. Herein, from one-dimensional silver nanowires (AgNWs) and two-dimensional MXene, three-dimensional MXene/AgNWs aerogels were designed as electric and heat transferring skeletons for epoxy nanocomposites by directional-freezing and freeze-drying methods. The resultant MXene/AgNWs/Epoxy nanocomposites with a low MXene/AgNWs content of 8.2 wt% combine a high electrical conductivity of 1532 S/m, and an exceptional EMI SE value of 94.1 dB with 3 mm thickness at the X-band frequency, as well as an improved TC of 2.34 W/m·K. The fabricated MXene/AgNWs/Epoxy nanocomposites possess excellent comprehensive properties enable valuable applications in electronic devices for EMI shielding and thermal management. [ABSTRACT FROM AUTHOR]

• Polymer-matrix composites. • 3-Dimensional reinforcement. • Thermal properties. • Syntactic foams. • Hollow glass microspheres. Electronic packaging materials with low dielectric constant (D k) and high thermal conductivity (TC) are of vital importance in mitigating signal delay and enhancing heat dissipation efficiency in modern electronics. However, low D k and high TC are difficult to complement each other, because high TC filler usually possesses a high D k. Herein, we have newly designed a composite material simultaneously with low D k and high TC through hollow glass microspheres (HGMs), boron nitride particles, epoxy resin and reticulated porous ceramic (RPC). The composite material prepared by sintering HGMs and RPC is more effective in improving TC while keeping low D k. Specifically, the D k of the newly designed composite is lower than 3.0 with a large TC of 0.96 W/m·K. This new epoxy-matrix composite with both low D k and high TC can shed new light on designing electronic packaging materials for advanced miniaturized electronics. [ABSTRACT FROM AUTHOR]

For new-generation miniaturized and high-frequency electronics, it is of vital importance to develop advanced electronic packaging materials, which combine high electromagnetic interference (EMI) shielding effectiveness (SE) and efficient thermal management capabilities, including heat absorption, thermal conductivity (TC) and heat dissipation. However, high EMI SE and efficient thermal management usually cannot complement each other for the same packaging material, because EMI shielding devices convert electromagnetic radiation directly into heat consumption, leading to consequent severe challenge to dispose heat dissipation. Herein, we have newly developed a high-performance phase change composites, in which MXene is confined in shape-stabilized phase change material (PCM) for simultaneous achievement of high EMI SE and efficient thermal management. Regarding high EMI, MXene can effectively shield electromagnetic radiation by converting the radiation into heat consumption. As for thermal management, PCM enables efficient heat absorption via the phase change process, and MXene enhances the thermal conductivity (TC) of MXene/PCM composite to facilitate heat dissipation. As a result, our developed MXene/PCM composite can achieve a high EMI SE of 64.7 dB in X-band, with an improved TC of 0.74 W/m·K. Furthermore, the interlayer capillary effect of MXene inhibits the leakage of liquid PCM during the solid-liquid phase transition, which can maintain the PCM shape stability. Our newly-designed shape-stabilized MXene/PCM composites with high EMI SE and large TC shed new light on designing EMI shielding materials with prolonged exposure to electromagnetic radiation, which can be envisioned to exhibit vast implications for advanced new-generation miniaturized and high-frequency electronics. [Display omitted] [ABSTRACT FROM AUTHOR]

In ternary nitrides, the Ga0.9Fe3.1N sample has ultimately been prepared through solid‐gas preparation for the gallium‐richest phase GaFe3N. The substitution of gallium atoms for iron atoms weakens the saturation magnetization of ferromagnetic γʹ‐Fe4N and induces the transmission from ferromagnetism to antiferromagnetism. A new magnetic behavior, defined as the spin glassy magnetic state, has been observed in the temperature‐dependent magnetic performance measurement process for Ga0.9Fe3.1N. The magnetic competition between ferromagnetic and antiferromagnetic Fe–Fe bonds will lead to the spin frustration of the magnetic system. And even the positional disorders caused by substitution, will all be responsible for the spin glassy behavior in Ga0.9Fe3.1N. [ABSTRACT FROM AUTHOR]

Nano-SiO 2 porous thermal insulating material (TIM) has drawn tremendous research interests due to its advantages of low density, high porosity and low thermal conductivity. However, its long-term stability in humid environment can be severely deteriorated by the high hydrophilicity resulting from tetrahedral coordination of oxygen and capillary effect of porous structure. It is still a great challenge to cost-effectively fabricate bulk TIM with superior hydrophobicity and consequent remarkable self-cleaning capability. Herein, via an oil-in-water microemulsion treatment, we have proposed a new strategy to construct 3D superior hydrophobic nano-SiO 2 porous TIM. The polymethylhydrosiloxane-modified TIM exhibits a large water contact angle of 166°, and corresponding excellent self-cleaning characteristic while maintaining low thermal conductivity of 0.031 W/m·K. Moreover, our high hydrophobicity of TIM exhibits excellent durability under high temperature up to 400 °C, high humidity of 100%, and chemical erosions. Detailed knowledge of the physical chemistry basis of the superior hydrophobic nano-SiO 2 porous TIM can provide great opportunity to fabricate advanced self-cleaning and heat insulating devices especially targeted for harsh environments. [ABSTRACT FROM AUTHOR]

The high integration density of microelectronic devices leads to local heat accumulation, and effective heat dissipation and signal transmission of packaging materials have become the primary issues to be solved. However, existing polymer materials have difficulty meeting the requirements due to their unsatisfactory thermal conductivity and thermal expansion properties. In this work, we proposed the use of digital light processing (DLP) printing technology to construct a triply periodic minimum surface (TPMS) skeleton, and a continuous and efficient heat conduction path was successfully constructed in epoxy resin by impregnating h-BN on the skeleton surface. When the loading of h-BN was 20 vol%, the thermal conductivity of the TPMS(SiO 2)@BN/EP(BN) composites was 1.86 W/(m·K), which was 786 % higher than that of pure epoxy resin. In addition, the thermal expansion coefficient of the composites decreased by more than 70 %. At the test frequencies of 3∼10 MHz, the composites showed stable dielectric properties, and the dielectric constant was always maintained in a low range, between 3.85 and 4.15. This work has realized the transformation of the method for constructing a heat conduction path from disordered to ordered and from random to repeatable. This provides a new strategy for the selection of microelectronic packaging materials. [ABSTRACT FROM AUTHOR]

Background: The efficacy of preoperative biliary drainage (PBD) has been debated for several decades, and yet indications for PBD remain controversial. The aim of this study was to compare the postoperative morbidity and mortality in patients with malignant obstructive jaundice undergoing direct surgery versus surgery with PBD. Methods: All consecutive patients with malignant obstructive jaundice who underwent radical resection between June 2017 and December 2019 at Zhongshan Hospital were analyzed retrospectively. The study population was divided into two groups: PBD group (PG) and direct surgery group (DG). The subgroups were chosen based on the site of obstruction. Perioperative indicators and postoperative complications were compared and analyzed. Results: A total of 290 patients were analyzed. Postoperative complications occurred in 134 patients (46.4%). Patients in the PG group had a lower overall rate of postoperative complications compared with the DG group, with perioperative total bilirubin (TB) identified as an independent risk factor in multivariate analysis (hazard ratio = 1.004; 95% confidence interval 1.001–1.007; P = 0.017). Subgroup analysis showed that PBD reduced the complication rate in patients with proximal obstruction. In the proximal-obstruction subgroup, a preoperative TB level > 162 μmol/L predicted postoperative complications. Conclusions: PBD may reduce the overall rate of postoperative complications among patients with proximal malignant obstructive jaundice. Trial registration: ClinicalTrials.gov, 2018ZSLC 24. Registered May 17, 2018, https://clinicaltrials.gov/. [ABSTRACT FROM AUTHOR]