Search

The overview describes the synergy between biological sciences and cellular structures processed by additive manufacturing to elucidate the significance of cellular structured implants in eliminating stress shielding and in meeting the bio-mechanical property requirements of elastic modulus, impact resistance, and fatigue strength in conjunction with the biological functionality. The convergence of additive manufacturing, computer-aided design, and structure-property relationships is envisaged to provide the solution to the current day challenges in the biomedical arena. The traditional methods of fabrication of biomedical devices including casting and mechanical forming have limitations because of the mismatch in micro/microstructure, mechanical, and physical properties with the host site. Additive manufacturing of cellular structured alloys via electron beam melting and laser powder bed fusion has benefits of fabricating patient-specific design that is obtained from the computed tomography scan of the defect site. The discussion in the overview consists of two aspects - the first one describes the underlying reason that motivated 3D printing of implants from the perspective of minimising stress shielding together with the mechanical property requirements, where the mechanical properties of cellular structured implants depend on the cellular architecture and percentage cellular porosity. The second aspect focuses on the biological response of cellular structured devices. [ABSTRACT FROM AUTHOR]

High entropy alloys (HEAs), consisting of five or more elements with nearly equal atomic composition with one another (5–35%), are new-generation alloys that have attracted signifi)cant interest since their advent in 2004 because of their unique structural and mechanical properties and thermodynamic and chemical stability. Some characteristics, including high mechanical strength at elevated temperatures, high ductility and fracture toughness at cryo)genic temperatures and high corrosion, erosion and wear resistance, have been demonstrated for HEAs that outperform traditional alloys and superalloys. Laser-cladding (LC) is an additive manufacturing technique that has good feasibility in designing and processing HEAs for advanced structural components and protective coatings. This overview provides a glimpse of recent advances in LC of HEAs in terms of design fundamentals, metallurgical phase and microstructure, specific properties for advanced coating applications and the effect of ceramic particles reinforcement in LC deposition of HEA coatings. [ABSTRACT FROM AUTHOR]

A Ti3C2 MXene/Ti composite powder was developed through surface modification and powder coating for producing a high-performance titanium matrix composites (TMCs) by laser power bed fusion. Introducing MXene rarely changed the original sphericity and flowability of Ti powder while it slightly enhanced the laser absorption capacity of Ti powder. The printing conditions in turn affected the morphology and distribution of MXene in as-printed composites. At optimised printing parameters, majority of MXene with high structural integrity and uniform distribution remained along the grain boundaries of as-printed composites, and a combination of high surface quality, geometrical accuracy and densification was obtained. The remaining MXene played the synergy of pulling-out effect and load transfer role, which increased the yield strength from 530 to 710 MPa, while retaining good ductility (elongation of 19.8%). Compared with ASTM standard cast Ti64 alloy, our MXene/Ti composites also exhibited superior comprehensive tensile properties and excellent strength-ductility synergy. [ABSTRACT FROM AUTHOR]

Polycrystalline nanoparticles of Al-doped and Ce-co-doped ZnO were processed through sol)gel co-precipitation. Crystallite sizes determined from XRD were in the range of 10.90 to 48.77 nm. FTIR spectra indicated a stretching mode of Zn-O bond. The insertion of Al and Ce at Zn-O site created Al-O and Ce-O bonds. UV-vis spectra favoured the formation of impurity levels by doping and co-doping. Their overlapping with the conduction band edge led to the reduction of band-gap. Blue-green emission which arises from radiative recombination of a photogenerated hole with an electron occupying oxygen vacancy was observed in photo)luminescence spectra. FESEM suggested granular growth in undoped ZnO which changed to diverse structures such as nano-bar and cluster of elongated grains. Significant improvement in room temperature ferromagnetism (RTFM) was noticed by co-doping of Ce in Al-doped ZnO. Formation of bound magnetic polarons (Ce3+-Vo-Ce3+) was the primary mechanism responsible for the improvement in RTFM. [ABSTRACT FROM AUTHOR]

The improvement of recrystallization texture and magnetic properties in grain-oriented electrical steel with trace Bi addition processed by strip casting process was studied in this study. Low casting temperature and sufficient liquid steel flow during strip casting process enabled relatively homogeneous distribution of Bi in the as-cast strip, which accelerated the precipitation during solidification and cooling process. As a result, relatively high density of duplex MnS + AlN, MnS and AlN was formed at grain boundaries and inside grain. Due to the synergistic effect of continuous precipitation and fragmentation of coarse precipitates during cold rolling, the number density of precipitates was increased and mean size was decreased along the processing route. High density of precipitates is attributed to severe inhomogeneous plastic deformation, which promoted the formation of high density in-grain shear bands during cold rolling and recrystallization Goss texture during annealing. Homogeneous microstructure with average grain size of ~ 11.6 μm, strong Goss texture with intensity of 2.5 multiples of random distribution, fine precipitates with number density of ~ 1.9 × 109 /cm2 and mean size of ~ 49 nm were formed after primary recrystallization annealing. Furthermore, grain-oriented electrical steel with Bi addition experienced complete secondary recrystallization of exact Goss grains during high-temperature annealing, which is attributed to beneficial optimization of Goss texture and strong inhibition effect, and superior magnetic induction B8 of 1.91 T was obtained. It is expected that this study paves a new way for fabrication of high-performance grain-oriented electrical steel. [ABSTRACT FROM AUTHOR]

The wide application of magnesium alloys as biodegradable implant materials is limited because of their fast degradation rate. Hydroxyapatite (HA) coating can reduce the degradation rate of Mg alloys and improve the biological activity of Mg alloys, and has the ability of bone induction and bone conduction. The preparation of HA coating on the surface of degradable Mg alloys can improve the existing problems, to a certain extent. This paper reviewed different preparation methods of HA coatings on biodegradable Mg alloys, and their effects on magnesium alloys' degradation, biocompatibility, and osteogenic properties. However, no coating prepared can meet the above requirements. There was a lack of systematic research on the degradation of coating samples in vivo, and the osteogenic performance. Therefore, future research can focus on combining existing coating preparation technology and complementary advantages to develop new coating preparation techniques, to obtain more balanced coatings. Second, further study on the metabolic mechanism of HA-coated Mg alloys in vivo can help to predict its degradation behavior, and finally achieve controllable degradation, and further promote the study of the osteogenic effect of HA-coated Mg alloys in vivo. [ABSTRACT FROM AUTHOR]