Search

The acoustic imaging results in the diffuse field are seriously affected by reverberation. The acoustic source localization algorithms based on the free-field assumption will produce many artifacts in the reverberant environment. To achieve accurate acoustic source localization in a reverberant environment, a sound field morphological component analysis (SF-MCA) model and an enhanced alternating direction method of multipliers (ADMM) algorithm are proposed in this article. First, the solution of the inhomogeneous Helmholtz equation is analyzed to characterize the acoustic components. Second, Green’s function and plane-wave basis function serve as dictionaries for sparse representation of the acoustic signal in the frequency domain, and the corresponding decomposition coefficients are obtained by the enhanced ADMM algorithm. Finally, the accurate acoustic imaging results are realized in the reverberant chamber space with strong reverberation ($T_{20}=174.30\,\,\text {ms}$). Experiments demonstrate the validation of the proposed SF-MCA method. The acoustic imaging obtained by the proposed SF-MAC dereverberation model is far superior to the acoustic imaging that treats the reverberation as the general Gaussian noise. [ABSTRACT FROM AUTHOR]

• Oder domain beamforming is proposed for the localization of rotating machineries under variable speed conditions. • A steering vector of order domain beamforming is constructed. Rotating machinery is widely used in the modern industry, which undergoes huge amounts of variable speed working conditions. Localizing the sound sources of the rotating machinery on a specific order is significant to noise source identification and fault diagnosis. The order domain beamforming method (ODBF) is proposed in this paper to localize the source in the rotating machinery at a specific order. Firstly, the measured acoustic array signals are resampled into the angle domain via the key phase signal. Then, the fast Fourier transform is operated to obtain the acoustic pressure on a specific order. Finally, with the derivated steering vector in the order domain, the proposed order domain beamforming method can obtain the acoustic map on the scanning plane to localize the primary acoustic sources of the rotating machinery. The numerical simulation investigates the performance of the proposed ODBF under different cases. The industrial motor noise source identification experiment further verifies the effectiveness of the proposed ODBF. [ABSTRACT FROM AUTHOR]

This paper presents an experimental investigation of rotating source localization to identify the axial fan noise with high spatial resolution methods. It exploits the on time-domain de-Doppler, and sparsity-based inversion and the convolution model to approximate the power propagation model of the rotating source. This work is also an extension of the previous paper of authors. But the focus of this study is the experimental investigation and application of actual data. To evaluate the performance of the proposed algorithm, a vortex generator is attached to the fan blade, creating discontinuities in the blade to simulate axial fan blade defects (cracks, holes, dust accumulations, etc.). The experimental data are shared as a data benchmark to promote further studies in the field of rotating acoustic localization. Compared with the state-of-the-art rotating Beamforming method (ROSI), the acoustic imaging results at various working frequencies for three different axial fans with different rotating speeds (RPM) are accurately identified and sparsely distributed. In addition, the power propagation model derived in the previous paper can be interpreted by a convolutional approximation model in this paper, and this technique can help to reduce the computational costs of proposed methods for real applications. The accuracy of the aerodynamic noise positions estimated by the proposed method are further proved to match well with the aerodynamic mechanism. • A practical implementation for the rotating sound sources localization in industrial axial fans is presented. • Two types of vortex generators (VGs) are attached to the blade, simulating the blade defects. • An explanation for the power propagation model based on the convolutional approximation is presented. • A data benchmark is established for peers to compare various rotating sound source localization methods. [ABSTRACT FROM AUTHOR]