Search

This article proposes a variational Bayesian (VB) inference based on the nonsynchronous array measurement (NAM) (VB-NAM) method in order to obtain the fast and robust localization of low-frequency acoustic sources. To enlarge the aperture size compared with the prototype array, the NAM is performed to measure the acoustic pressures with low-frequency based on the forward power propagation model. The implementation of the NAM can be reformulated into a cross-spectral matrix (CSM) completion problem. Then, to solve the inverse problem of the NAM power propagation model, the VB inference based on the Student-t priors and Kullback–Leibler (KL) divergence optimization is proposed. The advantages of the proposed VB-NAM benefit from the optimization of matrix inversion and adaptive estimation of regularization parameters. The contribution of the adaptive parameter evaluation is to reduce the impact of multiple interferences (such as additive noise and the matrix completion error) in NAM. Finally, both simulations at 800 Hz and experimental results at 1000 Hz are presented to show the validation of the proposed VB-NAM method, even under the anisotropic Gaussian noise conditions. Algorithm performance and iteration process are analyzed to demonstrate the efficiency and robustness. [ABSTRACT FROM AUTHOR]

The localization of cyclostationary sound sources is important for rotating machinery noise source identification and fault diagnosis. Cyclostationary sound sources are a special class of nonstationary sound sources, which exhibit periodic changes in statistics. Most of the conventional sound source identification methods are based on the stationary sound source assumption, which do not consider the cyclostationarity of the radiated sound field by rotating machinery. Thus, they are hard to localize the acoustic sources with different cyclic frequencies. In this paper, a novel technique of localizing the cyclostationary acoustic sources with different cyclic frequencies is proposed. First, the cyclostationary conventional beamforming (CSCBF) method is deviated. In CSCBF, the cyclic-cross-spectral matrix (CCSM) is defined considering all the cross cyclic spectral correlation (CSC) between different microphones in the array. The left steering vector and right steering vector are constructed to focus the CCSM on each scanning grid point at a given combination of cyclic frequency and spectral frequency. Then, the high resolution cyclostationary beamforming (HR-CSBF) is further developed to improve the spatial resolution of CSCBF. In HR-CSBF, two linear equations according to the property of CSC is established as the acoustic inverse problems. With the sparse distribution of the cyclostationary sources in the space as the prior knowledge, the iterated Bayesian focusing (IBF) is utilized to obtain a robust and sparse solution in HR-CSBF. Numerical simulations and experiments are conducted to validate the proposed methods. To explore the potential applications of the proposed methods, the localization of high pressure pump (HPP) and rolling bearing with outer-race failure are also used to evaluate the effectiveness of the proposed methods. It turns out that both CSCBF and HR-CSBF can localize the cyclostationary sources with different cyclic frequencies. Compared with CSCBF, HR-CSBF can achieve a higher spatial resolution in the obtained acoustic map. [ABSTRACT FROM AUTHOR]

• Oder domain beamforming is proposed for the localization of rotating machineries under variable speed conditions. • A steering vector of order domain beamforming is constructed. Rotating machinery is widely used in the modern industry, which undergoes huge amounts of variable speed working conditions. Localizing the sound sources of the rotating machinery on a specific order is significant to noise source identification and fault diagnosis. The order domain beamforming method (ODBF) is proposed in this paper to localize the source in the rotating machinery at a specific order. Firstly, the measured acoustic array signals are resampled into the angle domain via the key phase signal. Then, the fast Fourier transform is operated to obtain the acoustic pressure on a specific order. Finally, with the derivated steering vector in the order domain, the proposed order domain beamforming method can obtain the acoustic map on the scanning plane to localize the primary acoustic sources of the rotating machinery. The numerical simulation investigates the performance of the proposed ODBF under different cases. The industrial motor noise source identification experiment further verifies the effectiveness of the proposed ODBF. [ABSTRACT FROM AUTHOR]

The Modal Composition Beamforming (MCB) method can quickly achieve the localization of fast-rotating sound sources; however, its low resolution and unclear applied conditions severely limit its industrial application. This study aims to investigate the MCB-based high-resolution localization method for multiple rotating sound sources and apply it to the localization and identification of axial-fan blade-noise. In this paper, the Variational Bayesian Approximation (VBA) and the Subspace Variational Bayesian Approximation (SVB) methods are used to solve the MCB-based rotating sound power propagation (RSP) model, denoted as RSP-VBA and RSP-SVB, respectively. The effectiveness of the proposed RSP-VBA and RSP-SVB are experimentally validated for the first time. Compared to the conventional MCB method, the resolution is significantly improved, and the proposed high-resolution methods are even faster than the classical Rotating Source Identifier (ROSI) method in most conditions. More importantly, the applied condition of the MCB, RSP-VBA, and RSP-SVB methods is given and verified by using three evaluation indicators. Then a schematic of the applied condition with examples is provided. With the guide of the applied conditions, the RSP-VBA and RSP-SVB methods are applied to the blade-noise localization of various multiblade high-speed axial fans. [ABSTRACT FROM AUTHOR]