Search

In waterway regulation engineering, submerged reefs are quite susceptible to the repetitive oblique strike from drop hammer and impact drilling, leading to a repetitive compression–shear impacting. Understanding the dynamic responses and failure mechanism of saturated rocks subjected to repetitive compression–shear impacting is thus of great significance for the efficient removal of submerged reefs. In this study, using the split Hopkinson pressure bar (SHPB) apparatus, the repetitive compression–shear impacting tests were conducted on the saturated and dry sandstone specimen from the harbor excavation project in Guoyuan Port (Chongqing, China). Our experimental results indicate that the increasing loading rate or shear component in the dynamic loading has a negative influence on the bearing capacity of saturated sandstone subjected to repetitive impacting. The deformability of saturated rocks increases as the impacting number or the shear component in the dynamic loading. The energy absorption ability as well as the energy utilization of the saturated rocks is highly improved by implementing repetitive compression–shear impacting, and such improvement yields an ascension limit with the increasing shear component in the dynamic loading. As the shear component introduces into the repetitive impacting loading, the failure patterns of rocks change from the relative tensile mode with a large deformation band along the loading direction to the combined compression–shear mode with two parallel large deformation bands inclined to the loading direction, the water content between the mineral grains promotes the shear failure in rock dynamic testing. These results can provide a better understanding of the dynamic responses and failure properties of saturated rocks subjected to repetitive compression–shear impacting. Highlights: Illustrated influences of repetitive compression–shear impacting on the bearing capacity and deformability of saturated and dry rocks. Investigated energy dissipation of saturated and dry rocks under repetitive combined compression–shear impacting. Revealed failure patterns of saturated and dry rocks under repetitive combined compression–shear impacting. [ABSTRACT FROM AUTHOR]

The drilling-hammer method is adopted for the breaking over submerged reefs in waterway regulation engineering. However, rocks with pre-drilled holes are highly susceptible to the repetitive impacts from drop hammers or drilling equipment. Exploring the dynamic responses and failure behaviors of drilled-hole rocks under repetitive impacting is important for promoting implementation of this technique. In this study, the repetitive impacting tests were conducted on the drilled rocks by the split Hopkinson pressure bar to investigate the rock bearing capacity, deformation property, failure behavior, and energy evolution. The results indicate that the presence of pre-drilled holes and the decreasing loading rates attenuate the bearing capacity of rocks subjected to repetitive impacting. In contrast, the rock deformation capacity is impacted subtly by the impact loading rate and increases with the number of impacts and borehole size. The drilled rock failure occurred with the prevalence of intergranular fractures; subsequently, the proportion of transgranular fractures increased, contributing to the loading rate-dependent bearing capacity. The inverted S-shaped damage evolution curve was assessed using the inverted logistic growth model. The specimen absorbed few incident energies for fracture generation and propagation, and the rock with a larger drill size displays higher energy utilization and larger fragments. • Illustrated the influences of repetitive impacting on the bearing capacity and deformability of pre-cracked hole rocks. • Revealed the failure behavior and fracture mechanism of pre-cracked hole rocks under repetitive impacting. • Depicted the damage evolution of pre-cracked hole rocks under repetitive impacting by the inverted logistic growth model. • Investigated the dynamic energy dissipation of pre-cracked hole rocks under repetitive impacting. [ABSTRACT FROM AUTHOR]