Search

This paper proposes an innovative integrated path planning and trajectory tracking control framework for a quadrotor unmanned aerial vehicle (UAV) in the presence of environmental and systematic uncertainties to achieve integrated guidance and control. Firstly, in order to perform real-time path planning, a computationally cost-effective planning algorithm is designed to find an optimal and smooth path while avoiding both static and dynamic obstacles. Then, by employing the pure-pursuit path following approach, the generated geometric path is converted to a trajectory profile related to time, which serves as the reference commands for the low-level trajectory tracking controller. Finally, a novel adaptive sliding mode trajectory tracking controller is proposed to compensate model uncertainties and maintain the desired tracking performance for the studied quadrotor UAV. With the proposed adaptive schemes, overestimation of uncertain parameters can be avoided, which further contributes to avoiding control chattering of the system. The performance of the proposed framework is validated through comparative simulation and experimental tests based on a quadrotor UAV subject to model uncertainties and environmental obstacles, which confirms the effectiveness and superiority of the proposed approach for practical applications. [ABSTRACT FROM AUTHOR]

An adaptive sliding mode fault‐tolerant control strategy is proposed for a quadrotor unmanned aerial vehicle in this article to accommodate actuator faults and model uncertainties. First, a new reaching law is proposed, with which a sliding mode control (SMC) law is constructed. The proposed reaching law is made up of a sliding variable and the distance between it and a designated boundary layer, and it can effectively suppress the unexpected control chattering while preserving the necessary system tracking performance. Then, an adaptive SMC scheme is proposed to further solve the fault and uncertainty compensation problem. The proposed adaptation law helps to prevent overestimation of the adaptive control parameters, as well as avoiding control chattering. Finally, a number of comparative simulation tests are carried out to validate the effectiveness and superiority of the proposed control strategy. The demonstrated quantitative comparison results confirm its advantages. [ABSTRACT FROM AUTHOR]

This article proposes a safety control scheme for quadrotor unmanned aerial vehicle (UAV) to counteract ground effect and blade damage. The impacts of ground effect and blade damage are quantitatively analyzed in the established model. The proposed safety control scheme consists of position and attitude loops. Specifically, a proportional and derivative controller is designed as a baseline control with acceleration feedforward in the position loop. A disturbance observer (DO) using the measured Euler angles is exploited to estimate the lumped disturbance forces. The developed DO can effectively mitigate the estimation deviation caused by the angle tracking error. Subsequently, differential flatness theory is used to obtain the Euler angle references and the derivatives. In the attitude loop, sliding mode control and fixed-time sliding mode observer (SMO) are integrated to deal with ground effect and blade damage promptly. To demonstrate the effectiveness of the proposed safety control scheme, flight experiments are carried out, where the quadrotor UAV flies close to the rugged ground in the presence of blade damage. [ABSTRACT FROM AUTHOR]

This article presents a single‐hidden‐layer feedforward network (SLFN) aided fault‐tolerant control (FTC) scheme for a class of nonlinear systems subject to actuator faults. First, the upper bounds of the norms of the unknown functions, which cover information of actuator faults and amplitude saturation degrees, are deployed. The upper bounds are approximated by SLFNs with adaptive techniques. Subsequently, a sliding mode control approach is presented to allow for prompt corrective reactions, with explicit consideration of multivariable conditions and control input constraints. Finally, simulation results based on a nonlinear Boeing 747 aircraft model are presented to demonstrate the effectiveness of the proposed FTC scheme. [ABSTRACT FROM AUTHOR]