Search

China is the top emitter of greenhouse gases in the world. Pulp and paper industry is one of eight the strictly regulated industries about carbon emission in China. However, estimates of carbon emissions from China's pulp and paper industry have been suffered from remarkable uncertainty. It is summarized that is aroused by the inaccuracy of factors evaluating energy consumption, and the huge gap between the calculation standards for assessing energy consumption in the production process and the actual level recorded in the factories. This paper re-evaluated the carbon emission of China's pulp and paper industry from the perspective of life cycle assessment, and applied more accurate emission factors, taking account of the actual energy consumption of the production process in factories, to estimate the actual carbon emissions in maximum. It is found that the national standards about the energy consumption quota of China's pulp and paper industry is no longer applicable, and the actual energy consumption regulated in the production process is far better than the advanced level given by the national standards. The greenhouse gas emission have been seriously overestimated approximately 12.00%–56.17% by international organizations. • Life Cycle Analysis of the China's pulp and paper Industry is conducted thoroughly. • The pulp flow of China's pulp and paper Industry is analyzed. • Energy regulated in factory is far better than the national standards' required. • Carbon emissions of China's pulp and paper Industry are overestimated. [ABSTRACT FROM AUTHOR]

Guiding industries to produce in an effective and environmentally sustainable manner has become a key issue for governments around the world. Over the past 15 years, series of regional and industrial development policies have been introduced by the Chinese government. This has influenced the geographical distribution and energy efficiency performance of China’s industries. This paper quantifies the influence of enterprises geographical distribution on energy efficiency improvement in the paper industry and aims at providing some helpful suggestions on industrial development to policy makers. The main results show that, firstly, the paper industry in eastern China shows obvious characteristic of agglomeration. The average location quotient is 1.2278. However, following the industrial and regional development policies, the characteristic of agglomeration is weakening. Secondly, only when agglomeration reaches a certain level (location quotient is above 0.5447) will industrial agglomeration positively impact on industrial energy efficiency improvement (a 1% increase in agglomeration will increase dynamic energy efficiency by at least 0.23%). Thirdly, the regional development policies carried out by the government slow the pace of energy efficiency improvement in China’s paper industry. The empirical results indicate that the government needs to consider regional characteristics and consciously guide industrial enterprises to concentrate in the dominant area. [ABSTRACT FROM AUTHOR]

China’s paper industry consumes a lot of energy and emits huge amounts of pollutions. The Chinese government over the past decades has done a lot to promote energy efficiency of the industry. This paper studies the impact of industrial polices to improve energy efficiency. The energy efficiency change is firstly studied under a framework of total factor efficiency. On this basis, different econometric models are built to discuss the detailed energy efficiency characteristics of the paper industry. The main results are as follow: (i) ownership structure did influence the energy efficiency, but the influence is different in different conditions; (ii) energy efficiency of the paper industry can be improved by economies of scale; (iii) market competition can to some extent overcome the motivation and supervision problem that often occur in state-owned companies; (iv) energy price cannot play the role of resource allocation well in China. Finally, based on our findings, some suggestions are provided. [ABSTRACT FROM AUTHOR]

China's paper industry accounts for a larger proportion of the global paper industry and consumes large amounts of energy. Energy conservation and pollution reduction of the industry have become the focus of China's national development strategy. Energy efficiency is an important index which directly determines the amounts of energy consumption and pollution emissions. To understand the energy efficiency evolution of China's paper industry, this paper establishes an input-output data of the paper industry for 29 provinces in China and applies DEA method and econometric models to estimate and comprehensively discuss the energy efficiency issues based on the framework of total factor efficiency. Our results indicate that China's paper industry has a large energy saving potential even though its energy efficiency has improved during the period 1990–2013. The saving potential is about 65% under the meta-frontier and 44% under the group-frontier. Moreover, there are significant differences between different regions in production technology and energy efficiency. The performance of eastern China is better than other regions. But the technology gaps between the different regions are shrinking and converging over time. Finally, some policy recommendations are proposed to improve the energy efficiency of the industry. [ABSTRACT FROM AUTHOR]

China has become the world largest paper and paperboard producer. However, pulp and paper industry has involved high resource consumption and severe pollution especially for water. This research has assessed the eco-efficiency of China's pulp and paper industry at the national level and provincial level. An overview regarding the cleaner production of China's pulp and paper industry was presented to reveal the measures for reducing environmental impact in the last two decades. Slacks-based measure was used to analyze the efficiency levels of 16 provinces' pulp and paper industries. To uncover the underlying causes of eco-efficiency performance, Malmquist–Luenberger index was calculated to discover the drivers of productivity growth of pulp and paper industries. Our results showed that the pollution treatment of China's pulp and paper industry has made progress in terms of water consumption and water pollution, although the absolute amount of pollution discharge is still large. Chemical oxygen demand emissions are still the first critical influencing factor of pulp and paper industry's inefficiency. Furthermore, efficiency progress was the dominating contribution of the industry's productivity growth between 2010 and 2013. The policies for adjusting the industrial structure of pulp and paper industry have resulted in the scale effects through eliminating backward production capacity and accelerating merger and acquisitions. Moreover, the productivity of pulp and paper industry was underestimated when the undesirable outputs were ignored. It indicates that the stricter environmental regulations have positive effects on paper companies to internalize environmental pressures in the production activities through environmental management. In the future, pulp and paper companies should further internalize the cost of pollution treatment through scale effects and technology improvement. [ABSTRACT FROM AUTHOR]

With the development of energy technology, hydrogen is gradually becoming widely used. China is also rapidly developing its own hydrogen energy industry in an effort to accomplish the "dual carbon target'. Hydrogen from methane is one of the mainstream sources, of which hydrogen from methane cracking is the decomposition of methane into hydrogen and solid carbon, with the solid carbon also having a high economic value. In particular, this technology does not emit carbon dioxide, which is very friendly to the environment, but it cannot avoid larger energy consumption. In contrast, hydrogen production from methane cracking driven by solar energy not only combines the characteristics of no CO 2 emission, but also greatly reduces the consumption of primary energy, which is the future development trend of hydrogen production from methane. This paper provides a brief overview of the various technological pathways for methane to hydrogen production in the context of China's actual development, focusing on the current status of the development and application of solar methane cracking to hydrogen production technologies at home and abroad. Among them, this paper mainly discusses the characteristics of solar reactors of different sizes and structures, and summarizes the results of related optimization studies. Meanwhile, the application of catalysts in solar reactors and the problem of carbon deposition are analyzed, and the practical application of solar methane cracking hydrogen production system is outlined. Finally, the future development of solar methane cracking hydrogen production technology is prospected from the national situation of China. [Display omitted] • Solar methane cracking for hydrogen can reduce emissions and energy consumption. • The current state of research on solar reactors is summarized. • Solar methane cracking requires higher performing catalysts. • Providing insights into the future development of solar methane cracking in China. [ABSTRACT FROM AUTHOR]

Abstract: The objective of this paper is to estimate the energy saving potential in China's paper industry by determining energy intensity under different scenarios. Cointegration model and stability test are applied to formulate the equilibrium equation. Results show that energy price, industry structure, profit margin and technology have significant impact as they are negatively correlated to changes in energy intensity. Three scenarios (BAU (business as usual), intermediate and active) are designed to estimate the future trend of energy intensity in paper industry. In 2010, the energy intensity (energy consumption per unit of value added) was 4 tce/10,000 RMB, and by the scenarios it is expected to considerably decline. According to the BAU (business as usual) scenario, the energy intensity will decrease to 2.56, 1.43 and 0.70 tce/10,000 RMB by 2015, 2020 and 2025, respectively. With respect to the intermediate scenario it is expected to drop further to 0.44 tce/10,000 RMB. Yet by the active scenario, the energy intensity is expected to considerably decline to 0.36 tce/10,000 RMB by 2025. Using the BAU forecast as a baseline, the quantity of energy savings is estimated to be 185.6 billion tce by 2025. Considering this important potential, we also provided some policy suggestions. [Copyright &y& Elsevier]

Abstract: The pulp and paper industry is one of the most energy-intensive industries worldwide. In 2007, it accounted for 5% of total global industrial energy consumption and 2% of direct industrial carbon dioxide (CO2) emissions. An energy audit is a primary step toward improving energy efficiency at the facility level. This paper describes a plant-wide energy audit aimed at identifying energy conservation and CO2 mitigation opportunities at a paper mill in Guangdong province, China. We describe the energy audit methods, relevant Chinese standards, methods of calculating energy and carbon indicators, baseline energy consumption and CO2 emissions of the audited paper mill, and nine energy-efficiency improvement opportunities identified by the audit. For each of the nine options, we evaluate the energy conservation and associated CO2 mitigation potential. The total technical energy conservation potential for these nine opportunities is 967.8terajoules (TJ), and the total CO2 mitigation potential is equal to 93,453tonnes CO2 annually, representing 14.4% and 14.7%, respectively, of the mill’s total energy consumption and CO2 emissions during the audit period. [Copyright &y& Elsevier]

Papermaking is a water intensive industry. The growth of paper demand will further intensify the need of fresh water resources. Papermaking involves complex processing routes. Previous investigations of water consumption in papermaking industry have focused primarily on key processes and pathways, ignoring the impacts of many intermediate and inter-related processes in paper production cycles and there underestimating the sustainability impacts. Herein, the results of a life cycle analysis of water consumption for papermaking industry in China using an extensive system boundary that includes the water embedded in intermediate processing are presented. The results show the life cycle water consumption and water saving potentials for different papermaking pathways. The advocacy of "forest pulp and paper integration" may have few practical contribution to reducing water consumption due to the low indirect water consumption of raw materials and energy for transportation. [ABSTRACT FROM AUTHOR]

• A distribution dynamics approach is employed to examine the converge of TFEE across Chinese PAA level cities. • The findings show a clear convergence in TFEE. • Convergence comes more from efficiency drops in high TFEE cities than from efficiency gains in low TFEE cities. • The environmental protection polices in key cities improved energy efficiency. • Large-sized cities show better performance in energy efficiency than small- and medium-sized cities. Improving energy efficiency is considered the most direct route to reducing carbon emissions on a massive scale. To examine the long-run trend of China's energy efficiency, this paper employs a distribution dynamics approach to analyze the convergence of total-factor energy efficiency (TFEE) across 286 Chinese cities between 2002 and 2014. The result suggests the existence of convergence, which comes more from the efficiency declines in the high TFEE cities rather than the efficiency gains in the low TFEE cities. Despite the fact that a few cities have performed well in energy efficiency, the majority of cities have converged to a low-efficiency point. Further analyses show that the inefficiency was attributed to inefficient energy use in small- and medium-sized cities. Our analysis provides strong scientific support for China's ongoing energy conservation and environmental protection policies. [ABSTRACT FROM AUTHOR]

Daytime subambient radiative cooling is a most promising alternative to electricity-free building cooling. However, optical performance degradation arising from surface contamination and inevitable parasitic heat gain still pose unprecedented challenges to cool building at subambient temperatures. This paper proposed a superhydrophobic cellulose aerogel cooler (SHB-CAC) as building envelope by integrating self-cleaning capacity, passive daytime radiative cooling and thermal insulation to reduce environmental heat gain. The SHB-CAC demonstrates high solar reflectance (93%) and long-wave infrared emittance (91%), accomplishing a temperature drop of 8.5 °C lower than the ambient under sunlight of 800 W/m2 in the outdoor experiment. Notably, the SHB-CAC possesses low thermal conductivity (28 mW/(m∙K)) that suppresses parasitic heat gain from warmer surrounding and reduces cooling energy consumption. The self-cleaning property resulting from superhydrophobicity protects SHB-CAC from water wetting and dust contamination but also maintains its good surface radiation capacities under different humidity environment. A building energy simulation was conducted and results showed that 43.4% of cooling energy on average could be saved compared to the building baseline consumption, if SHB-CAC was widely used in China, indicating that the strategy of optical and thermal conductivity management of cooler has the potential to reduce the energy consumption of buildings. [Display omitted] • Waste paper is converted into aerogel cooler for building cooling. • High R solar and ε IR , thermal insulation, and self-clean are achieved in one design. • The aerogel achieves a high sub-ambient temperature drop of ∼8.5 °C on daytime. • The aerogel shows that 43.4% of cooling energy could be saved. [ABSTRACT FROM AUTHOR]

To reduce energy use and achieve a low carbon production in pulp and paper industry (PPI), it is essential to improve energy efficiency in pulp and paper production. In this study, the energy savings from the PPI were estimated based on a techno-economic analysis by EAGER tool for PPI at the factory level. The structure and implement procedure were introduced initially. Two typical pulp and paper mills from China were determined to estimate the impact of selected energy efficiency technologies (EETs) on energy savings as the cases in the base year. One Factory (A) only produced paper products (i.e. corrugated paper and Kraft linerboard) while the other Factory (B) also produced market pulp besides sack paper. In totally 22 selected EETs were applied to assess their saving potential in Factory A, and 29 measures were applied in Factory B. The results show that 2290 TJ and 1179 TJ of final energy could be saved annually in Factory A and B, corresponding to reduction of 29.4% and 13.6% total energy consumption respectively for the case factories. The CO 2 reduction potential was 32.3% for Factory A compared with that of 16.6% in Factory B. It suggests that the pulp and paper mills should encouraged to use this method estimating energy saving potential, and improve their energy efficiency with suggested measures in order to reduce energy consumption and related carbon emissions further in the coming years. • Energy savings of pulp and paper production were estimated at the factory level. • A techno-economic evaluation tool was applied to access the energy savings and carbon emission reductions. • Two typical pulp and paper factories from China were investigated to estimate their energy savings in the base year. • It is useful to assess energy savings and select feasible EETs in achieving energy saving and emission reduction targets. [ABSTRACT FROM AUTHOR]

• We study the relationship between GVC embedding and carbon emission density. • A mediation effect model was established to test the mechanism. • There is a U-shaped relationship between urban GVC embedding and carbon emission density. To achieve its carbon peak and neutrality plan, whether China's global value chain (GVC) embedding has a carbon emission reduction effect is a question worthy of attention. This paper measures the GVC embedding degree of 218 Chinese cities from 2000 to 2016, and constructs a panel data model to investigate the impact and its mechanism of GVC embedding on carbon emission intensity. This study finds that there is a significant U-shaped relationship between GVC embedding and carbon emission intensity, and a series of robustness test results support this conclusion. Export scale, energy consumption structure and technological innovation play a mediation role in the impact path of GVC embedding on carbon emission intensity. Based on this, this paper proposes that while participating in GVC, China needs to actively utilize the emission reduction effect of GVC, promote the transformation of export mode to high quality, reduce the use and dependence on high-carbon resources such as coal, and encourage companies to innovate. [ABSTRACT FROM AUTHOR]

Based on the evidence from listed company microdata and data from 285 cities in China, this paper studies the coordinated development of two-way FDI (CDFDI) in improving green energy efficiency (GEE). In particular, this paper examines the spatial heterogeneity effects of CDFDI on GEE. The results showed that CDFDI had a positive impact on the GEE of local and surrounding cities. Mechanistic examinations show that the effects of CDFDI on GEE are mediated by technological diffusion, nationalization, and environmental regulation. After dividing different city types, the impact of CDFDI is also different. By constructing a spatial decay weight matrix, this paper also finds that the positive spatial spillover effect of CDFDI is limited to 1050 KM. Finally, different investment motive portfolios also has a heterogeneous impact on the local and surrounding cities' GEE. After dividing the time nodes, the effect of this heterogeneity is more prominent. • We use multiple undesired output indicators covering eight pollutants to measure green energy efficiency (GEE). • CDFDI has a significant boost to GEE in local and surrounding cities. • The impact of CDFDI on GEE is moderated by technological diffusion, nationalization, and environmental regulation. • The spatial spillover effects of CDFDI are heterogeneous by city category and geographic distance. • CDFDI with different investment motives has heterogeneous effects on local and surrounding cities' GEE. [ABSTRACT FROM AUTHOR]

Regional integrated energy systems (RIES) can economically and efficiently use regional renewable energy resources, of which energy storage is an important means to solve the uncertainty of renewable energy output, but traditional electrochemical energy storage is only single electrical energy storage, and the energy efficiency level is low. Hydrogen energy storage has the advantages of large energy storage capacity, long storage time, clean and pollution-free, and can realize the synergistic and efficient utilization of electricity and thermal power. Based on this, this paper proposes a synergistic planning method for an integrated energy system with hydrogen storage taking into account the coupled use of electric-thermal energy, which effectively reduces the system carbon emission and improves the comprehensive energy efficiency level. Firstly, this paper constructs an electric-thermal coupling model of the hydrogen energy storage unit and proposes an optimization strategy for the integrated energy system containing hydrogen storage taking into account the utilization of electricity and thermal power. Secondly, a planning optimization model with the lowest economy and carbon emission and the highest comprehensive energy efficiency was constructed. Third, the CSPO-GE optimization algorithm is proposed for solving the problem, which significantly improves the solution efficiency. Finally, a planning optimization simulation of RIES for a residential community W in northern China verifies the effectiveness of the model and method proposed in this paper. The comparative analysis of the three schemes shows that compared with the integrated energy system with conventional electrochemical energy storage and heat storage tank as the main form of energy storage and the integrated energy system with only hydrogen storage, the integrated energy system with hydrogen storage and heat storage tank can reduce carbon emissions by 43.8% and 7.61%, respectively, and improve the integrated energy efficiency level by 337.14% and 14.44%. • An electrothermal coupled production strategy based on dynamic equilibrium feedback regulation is proposed. • A hydrogen-containing RIES planning and optimization model considering economy-environment-efficiency is constructed. • A multi-objective chaotic particle swarm algorithm (CPSO-GE) based on greedy and elite retention strategies is proposed • The impact of cost variation of hydrogen storage devices on the economics of integrated energy systems is considered. [ABSTRACT FROM AUTHOR]

With rapid industrialization, rising fossil fuel consumption, and environmental concerns, developing clean and green energy is an inescapable option. Hydrogen has emerged as a significant potential energy carrier and a viable future replacement fuel for fossil fuels due to its renewable and pollution-free properties. Previous review papers have significantly contributed to the body of literature on the various technologies for producing hydrogen by revealing key insights into their working principles and conditions, as well as the economic and environmental aspects. In addition, they also highlighted the potential pathways to enable the application of these technologies in the context of carbon neutrality. However, these studies have not broken down the evolutionary patterns and developmental progress of either fossil fuel-based or renewable energy-based technologies used to produce hydrogen. In addition, the currently available literature does not contain the most recent research that focuses on the evolution and life cycle of each technology category from a chronological point of view. The key drivers, countries/regions, and their contributions to the field's development have received little attention. As a result, it is critical to monitor technological advances in hydrogen energy production and investigate the key enablers of these advancements. Against this backdrop, the current study employs patent analysis tools to achieve four primary goals: (1) to track the development trends in the field of hydrogen production from 2000 to 2019; (2) to identify and compare the recent development trends in the last five years according to the feedstock, i.e., fossil fuel, water, and biomass-based technologies; (3) to predict the technology life cycle of the two main groups of hydrogen production technologies (fossil and renewable); (4) to identify and compare the key drivers of hydrogen production technologies from a statistical standpoint. The findings of the study may aid in identifying technical prospects in the field of fossil and renewable-based hydrogen production, and decision-makers may use them as a reference in developing a strategic plan for future technological growth. • Patent review on hydrogen production technologies from 2000 to 2019. • Japan, US, China are the leading countries in the field. • Recent developments are focused on renewable energy-based technologies especially water. • Technology maturity rate of renewable-based technologies is about 57%. • R&D expenditure strongly promotes hydrogen production innovations. [ABSTRACT FROM AUTHOR]

Single-rate pipeline prices have resulted in low competitive flexibility and have led to high costs and consumption in China's refined oil logistics system. This study aims to propose a framework for multi-product pipelines supplementary pricing strategy that creates a win-win situation for both shippers and pipeline carriers while quantifying economic, energy and environmental performance. Based on the objective of cost minimization, a lower limit constraint on pipeline transportation quantity is added, and a discount coefficient is introduced for pipeline prices, thus improving the transportation optimization model. Moreover, this paper develops an implementation approach for a supplementary pricing strategy that can ensure that the discounted price is not lower than the sum of cost and minimum profit. This framework usability is confirmed using a Chinese oil company as an example. The results show that the optimal scheme can increase pipeline revenue by ¥79.8 million while reduce shipper's logistics costs by ¥1.68 million during the practice cycle. Meanwhile, this work reduces energy consumption by 1.37 tce, CO 2 emission by 444 tons, SO 2 emission by 5.65 tons, and NO X emission by 7.07 million tons for the logistics system. Compared with past studies, this study is more economical or more in line with market-oriented behavior. • A framework for 3E performance improvement of multi-product pipelines is proposed. • The improved transportation optimization model is used as a pricing tool. • A supplementary strategy implementation approach is defined. • Total economic benefit to shippers and pipeline carriers is ¥9.66 million. • The energy and environmental benefits of the logistics system are quantified. [ABSTRACT FROM AUTHOR]

• A simple, large-scale fabrication of cooling paper via pulping and papermaking technology. • The cooling paper is facilely deconstructed and regenerated to architect the secondary cooler. • The cooling paper features a high solar reflectance of 94% and emissivity of 0.95. • The cooling paper shows the sub-ambient temperature drop of 6 ∼ 8.8 °C under directly solar radiation at daytime. Passive radiative cooling materials provide coldness without energy consumption for all-day thermal comfort by reflecting solar irradiation and emitting heat into the 3 K universe. However, the conventional radiative cooling materials involve complex multilayer structures and unsustainable polymers, showing the non-recyclable disadvantage, which induces resource waste and environmental issues. Herein, we reported a low-cost, scalable, and eco-friendly radiative cooling material (namely cooling paper), consisting of the delignified, fibrillated cellulose fibers and nano-sized hydroxyapatite (HA) via the mature pulping and papermaking process. The resulting cooled paper can be recycled, and it can be easily deconstructed to harvest cellulose fibers and HA, individually. The recovered source materials can be reused to prepare secondary products that show comparable performance to the original cooling paper, including a high solar reflectance of ∼94% and an infrared emissivity of ∼0.95 in the atmospheric transparency window. Such cooling paper enables superior cooling performance with the temperature drop of 6 ∼ 8.8 °C under directly solar radiation. Based on the EnergyPlus simulation, our cooling paper shows a average cooling energy saving of ∼29 % in buildings across China. The recyclable cooling paper with high cooling capability and scalability, as well as environmental friendliness, shows promising potential for sustainable energy-efficient buildings. [ABSTRACT FROM AUTHOR]

This paper investigates the impact of import competition on energy efficiency among firms in China. Using a difference-in-differences approach that exploits industry- and firm-level tariff reductions following China's accession to the WTO, we examine the effects of reduced output tariffs on coal intensity, measured as coal use per output, of Chinese manufacturing firms. Our findings indicate that higher levels of import competition lead to significant reductions in coal intensity, without negatively affecting firm production levels. We also find evidence that these effects are primarily driven by multi-product firms adjusting their product mix to prioritize energy-saving options. [ABSTRACT FROM AUTHOR]

Renewable energy is regarded as an effective method to alleviate environmental pollution and accelerate the green transition in China. This paper systematically investigates the impact of financial inclusion on renewable energy demand by using S-GMM model based on provincial data in the green finance era. This paper also analyzes the asymmetry, heterogeneity, and mediating mechanism in the nexus between financial inclusion and renewable energy demand, and highlights the following findings: (1) Improved financial inclusion can promote renewable energy development in China and present the characteristics of green finance; (2) the impact of financial inclusion on renewable energy demand is asymmetric and heterogeneous; specifically, this impact is much higher in northern China and the regions with higher renewable energy development; and (3) wind and photovoltaic power generation are effective mediators between financial inclusion and renewable energy industry, while the mediation effects of hydropower and nuclear power are not significant. New evidence in this study is presented for the achievement of green transition in China, as well as practical policy implications for improving financial inclusion and increasing renewable energy consumption. For instance, fiscal and tax incentives and green investment subsidies in the renewable energy sector need to be further improved. • This study explores the impact of financial inclusion (FI) on renewable energy demand (RED) in China. • Asymmetry, heterogeneity, and the mediating mechanism are further discussed. • Increased FI can promote RED , which presents the characteristics of green finance. • The impact of FI on RED is asymmetric and heterogeneous. • Wind and photovoltaic power are effective mediators between FI and RED. [ABSTRACT FROM AUTHOR]

The problem of global warming is getting more serious, and vehicle emission is the main cause. In recent years, the number of locomotives in China has been increasing at a rate of more than 20% per year, and the problem of automobile pollution is becoming more serious. The transportation industry is the main source of fossil fuel combustion and environmental pollution. Therefore, in this paper, we propose a multi-view deep neural network (MVDNN) to analyze the key factors affecting the fuel consumption of automobiles. The experiments show that the introduction of human input improves the prediction accuracy and the root mean square error (RMSE) achieves 0.993. In addition, this paper also finds that for drivers, driving habits, driving frequency, and safety awareness are the most important factors affecting the fuel consumption of vehicles by combining Lasso regression with MVDNN. Finally, by comparing the prediction accuracy of different experiments, relevant policy suggestions are made. [ABSTRACT FROM AUTHOR]

• The informal sector can play a role in sustainable development. • Competition from the informal sector can significantly improve the energy efficiency of formal firms, and this result is robust. • Instrumental variable and property score matching method are used to address possible endogeneity issues. • Innovation has a significant mediating effect. Based on micro-evidence, this paper investigates the role of the informal sector in sustainable development. In particular, this paper examines the impact of competition from the informal sector on the energy intensity of firms based on Chinese manufacturing enterprise data. The results indicate that firms reduce their energy intensity in the face of fiercer competition from the informal sector. Competition from the informal sector has a more obvious effect on reducing energy intensity especially for firms with higher energy intensity. The subsample regression results imply prominent regional and enterprise ownership heterogeneity. The mechanism test indicates that competition from the informal sector reduces firm energy intensity by promoting the product innovation, production cost innovation, R&D (Research and Development) activities of formal firms. However, there is no evidence of a crowding-out effect, that is, competition from the informal sector has not been found to squeeze out firms' output and reduce energy intensity. [ABSTRACT FROM AUTHOR]

Promoting energy transformation in rural areas, building a Rural Integrated Energy System, and developing multi-energy complementary and comprehensive utilization of rural energy in accordance with local conditions are important paths to support global low-carbon transformation and rural revitalization. However, how to consider the coupling synergy of multiple devices and plan the capacity of multiple devices in rural energy systems in an economical, low-carbon, and reliable manner is an urgent issue facing the development of Rural Integrated Energy System. This paper proposes a bi-level programming optimization method of Rural Integrated Energy System based on coupling coordination degree of energy equipment. Firstly, a multi-dimensional rural user energy utilization framework is designed that comprehensively considers agriculture, animal husbandry, industry, and lifestyle. Secondly, the bi-level optimization model of the Rural Integrated Energy System based on the coupling coordination degree of energy equipment is constructed. The upper-level planning model puts forward the equipment coupling coordination degree, and determines the equipment selection scheme for different types of Rural Integrated Energy System planning. The lower-level planning model considers economy, low carbon, and reliability, and uses the improved multi-objective Harris Hawk optimization algorithm to solve the capacity of different energy equipment in the Rural Integrated Energy System. Finally, the effectiveness and scientific nature of the model and method proposed in this paper are verified by the Integrated Energy Systems of a rural area in the north of China. In addition, by comparing the equipment selection scheme with the traditional method, it can be found that the optimization scheme in this paper that considers the coupling coordination of energy equipment reduces the annualized total cost by 29.34 %, reduces the annual carbon emissions by 60.43 %, and increases the reliability by 15.85 %. The collaborative planning of energy economy, low carbon energy and reliable energy has been realized. • A framework for the utilization of energy by multiple users in rural areas was designed. • A bi-level programming optimization method of RIES based on coupling coordination degree of energy equipment was proposed. • An improved multi-objective Harris Hawk optimization was constructed. [ABSTRACT FROM AUTHOR]

To identify the influence of digital transformation on energy consumption, this paper introduces digitalization and energy elements into the multi-sector energy efficiency analysis model. Furthermore, this paper empirically tests the influence of digital transformation on energy efficiency from the micro level. The results show that the digital transformation indeed improves the enterprises energy efficiency, in which enterprises with higher energy efficiency are more affected. The improvement effect of digital transformation on enterprise energy efficiency continues to increase over time. In comparison, digital transformation shows more effective improvement effect on energy efficiency in enterprises that substantive transformation priority, with same group and maturity stage. Mechanism analysis shows that digital transformation can improve the energy efficiency of enterprises by reducing costs, increasing income, improving production efficiency and promoting technological innovation. In addition, the digital inclusive finance, government subsidies, intellectual property protection and service industry opening show positive regulatory effects. This paper proposes that, with the goal of peak carbon dioxide emissions and carbon neutrality, enterprises should actively increase digital investment and strengthen digital management of energy utilization. [Display omitted] • Digital transformation indeed improves the enterprises energy efficiency. • The promotion effect of digital transformation increases over time. • Digital transformation drives efficiency improvement and technological innovation. • Digital transformation contributes to cost reduction and benefit increase. [ABSTRACT FROM AUTHOR]

Carbon emission flow is an effective tool to obtain carbon emission distribution in power systems, which can guide the active carbon reductions of consumers through proper incentive schemes. With the increasing penetration of renewable energy, the existing single-valued carbon emission flow model based on deterministic forecasted power outputs cannot describe the impacts of renewable energy uncertainties on carbon flows. Therefore, this paper mainly focuses on the assessment of the probabilistic carbon emission flow through the power systems considering the impacts of load and renewable energy uncertainties. In this paper, the probabilistic carbon emission flow (PCEF) is innovatively proposed. With the PCEF, consumers can make better energy use plans considering their own risk appetites for carbon emission payment. Firstly, the impact factors of the PCEF are modeled, including load and renewable energy uncertainties and integrated carbon intensity of thermal plants. The uncertainties of load, wind power and photovoltaics are modeled based on a p-box method while the uncertainty of hydropower is modeled based on the multi-state model. Besides, the integrated carbon intensity model of thermal plants are proposed considering the carbon intensity variations during the operating, start-up, and shut-down stages. Furthermore, the probabilistic carbon emission evaluation framework is proposed to assess the probabilistic carbon distribution. In this framework, novel probabilistic carbon indices are defined to precisely characterize the carbon emission situation with probabilistic representations. A solution method based on an adaptive interval point estimation (AIPEM) algorithm is proposed to efficiently solve the developed evaluation problem. Tests on an IEEE-30 node system, and a real provincial power system in China validate the effectiveness and application of the proposed model. The results showed that the PCEF can be a useful tool for obtaining the probabilistic representation of carbon emission flow and guiding the consumers' active carbon reduction in power systems. • Probabilistic carbon emission flow is proposed considering multiple uncertainties. • Integrated carbon intensity model for thermal plants is developed. • A p-box model is used to describe the uncertainties of load and renewable energy. • PCEF can help consumers balance the cost and carbon risk when making decisions. [ABSTRACT FROM AUTHOR]

The current approaches to study the coupling mechanism between economy and environment seem to fall into self-circulation, failed to reveal "economy–environment interdependence". In this context, an exogenous variable is introduced into these models for better understanding the relationship. Benzo[a]pyrene (Bap) environment inventories in different cities in China were estimated by fugacity model based on Bap concentration data collected from previous studies. An extended model, stochastic impacts by regression on population, affluence and technology (STIRPAT), generated from original IPAT (a model that expresses the idea that environmental impact (I) is the product of three factors: population (P), affluence (A) and technology (T)) was used to study the relationship between Bap environment inventory and anthropogenic factors including population, vehicle amount, affluence and energy consumption. A ridge regression has been applied to optimize the model parameters. Overall, there exist good relationships between Bap inventories and economic factors. Specifically, population and affluence are the most significant factors that influence Bap inventory. Rise of the scale of population and vehicle amount increases the Bap inventory, as growth of GDP per capita and the efficiency of energy utilization have inhibitory effect on Bap inventory. Apparently, the influences of anthropogenic factors on Bap inventory are different between north and south China. Bap inventory in north China is more sensitive to the change of population and energy consumption, while is highly correlated to GDP per capita in south China. Further, according to social-economic development prediction, with assist of the result from STIRPAT model, we find out that Bap inventory drop 31% from 2001 to 2020 in China. Our estimates are comparable with the published data and confirmed that Bap can be regarded as a chemical indicator of social-economic development in China. Image 1 • An extended STIRPAT model derived from original IPAT was developed. • Population and affluence are the key factors that influence Bap inventory. • Advance of affluence and technology level curbs Bap environmental exposure. • We predict Bap environmental inventory drop 31% from 2001 to 2020 in China. • Bap can be used as an indicator of social-economic development in China. [ABSTRACT FROM AUTHOR]

Solid fuel use is harmful to the health of human beings and hinders the sustainable development of society. Although a considerable literature has sufficiently researched the negative consequences of solid fuel use, fewer studies have explored the determinants of residential polluted energy use in the framework of culture and socioeconomics by focusing on ethnic diversity groups. This paper fills this gap by investigating the impact of religion on the decision to use solid fuel for rural households in ethnic minority regions of China. In particular, we argue that to a large extent, religion provides spiritual support in ethnic minority regions, and it is positively associated with solid fuel use. We examine the issue by employing a large-scale dataset, namely, the China Household Ethnic Survey. Furthermore, this paper identifies two channels of the above finding. First, a pension is regarded as a living support that has a moderate effect in shifting towards clean energy adoption. Second, households located in less remote regions are able to counteract the sole spiritual support of religion, which also mitigates solid fuel use. The results are robust after addressing endogeneity and applying recent developments of alternative models. This paper further confirms that households with various religious activities turn out fewer working hours and have larger related expenditures, which results in less disposable income for energy use. In terms of policy implications, this article suggests the importance of recognizing the role of substantial living support and social inclusion in mitigating the negative impact of religion on clean energy use among rural households of ethnic minority regions. [ABSTRACT FROM AUTHOR]

It is well known that energy forecasts play an important role in guiding energy policy, economic development and technological progress. Therefore, based on the purpose of energy consumption and production forecasting, this paper proposes a novel structure adaptive discrete grey Bernoulli model, which is innovative in terms of both accumulated generating operator and model structure. In terms of accumulated generating operator, a new fractional order accumulated generating operator is proposed in this paper. The new accumulated generating operator has a different information priority by adjusting the values of the parameters. In terms of model structure, a novel discrete grey Bernoulli model is proposed in this paper. The novel model is well adapted to time series data containing nonlinear information, and can well mine and utilize the information contained in the original data. In addition, the Particle Swarm Optimization (PSO) algorithm was chosen to optimize the model parameters based on algorithm comparison experiments. This enables the model to flexibly adapt to a variety of complex data and has the ability of structure adaptive. Moreover, this paper conducts comparative experiments between the novel model and eight other forecasting algorithms for time series data. The numerical results show that the novel model has better forecasting performance for the data of China's total energy consumption, China's total electricity generation and China's total domestic electricity consumption. In addition, for the model reliability problem caused by the optimization algorithm, the stability and accuracy of the model are verified by Monte Carlo simulation and probability density visualization analysis. Finally, the proposed model predicts the future development trend of energy consumption and production in China. • A novel structural adaptive discrete grey Bernoulli model is established. • The proposed model can grasp nonlinear and fluctuant in various datasets. • The robustness analysis of the novel model is established. • Comparative study shows that the novel model is superior to other models. • Relevant suggestions are put forward according to the prediction results. [ABSTRACT FROM AUTHOR]

In the background of exhaustion of the traditional fossil energy sources and environmental deterioration, developing renewable energy has become a strategic choice for countries to achieve energy sustainable utilization and carbon neutrality target. Different renewable energy technical plans have different characteristics under multiple criteria. Therefore, before the further exploitation of renewable energy sources, it is of great significance to evaluate the comprehensive performance of different plans and then determine the best renewable energy sources. However, the commonly used weight calculation methods in the existing renewable energy evaluation have obvious shortcomings, such as the randomness of the subjective method is strong and the gap in the weight allocation of the objective method is too large, which affect the reliability and accuracy of the sorting result. In this paper, a novel weight calculation method based on non-dominated sorting genetic algorithm (NSGA-II) is proposed, and is applied to renewable energy evaluation. The study in this paper focuses on methodology. Firstly, for the linear normalized and Zeros normalized evaluation data, the differences between renewable energy plans in the two normalized evaluation data are measured, and the ranking deviations of the two normalized data are calculated. Then, the multi-objective weight solving model is constructed in terms of plans differences minimization and ranking vectors deviations minimization. The NSGA-II algorithm is applied to the optimization of multi-objective functions to find the Pareto non-dominated solution, so as to determine the weight values of each evaluation index. Finally, the TOPSIS method is used to determine the relative closeness value of each plan, and the rankings of renewable energy technical plans are achieved. Based on the actual renewable energy development data of a province in China, experiments were carried out to investigate the effectiveness of the proposed method. Experimental results show that the proposed method performs better than some popular renewable energy evaluation methods. [Display omitted] • Propose a novel evaluation method for renewable energy technical plans. • Apply non-dominated sorting genetic algorithm II to determine the index weights. • Compared with the existing evaluation method, the proposed method performs better. [ABSTRACT FROM AUTHOR]

• A novel application mode of CSP with HEHP technology is proposed. • The flexible operation benefits of CSP with HEHP technology in the IES are analysed and quantified. • The carbon emission trajectory of the IES containing CSP with an HEHP device is depicted. • CSP with HEHP technology increases the utilization of solar energy. • A rational combination of the hydrogen and thermal energy storage capacities are necessary. The efficient integration of renewable energy with hydrogen storage is an important means for China to achieve carbon neutrality. Concentrated solar power (CSP) is an emerging technology for solar energy utilization that combines the advantages of power generation and energy storage. However, CSP has not been fully exploited because of the high generation cost and an incomplete market mechanism in China. The heat collected by CSP can be utilized for high-temperature electrolytic hydrogen production (HEHP), which is an efficient technology for hydrogen production and storage, and reducing carbon emission. Thus, a low-carbon operating mode for an integrated energy system (IES) consisting of wind, solar and hydrogen energy is proposed in this paper. First, an optimal operation model of electricity-heat-hydrogen coupling for an IES containing CSP and HEHP is established. Second, the effect of CSP with HEHP on the total operation performance of the system is evaluated from the aspects of the system economy, renewable energy utilization, and carbon emission. Finally, the model is validated by a case study of an island IES, and an optimal sizing for hydrogen energy storage and thermal energy storage of CSP is determined. The results show that CSP with HEHP can effectively improve the utilization rate of solar energy and reduce the carbon emissions of the system, offering an approach for carbon reduction planning and the operation of CSP in electric-hydrogen energy systems. [ABSTRACT FROM AUTHOR]

The rapid development of China's economy has driven the growth of energy consumption. However, the domination of the energy structure by fossil energy not only increases carbon emissions but is also an important source of fog and haze in China. This will cause global warming and increase people's lung diseases. To alleviate these problems, renewable energy (RE) development is crucial in reducing CO 2 emissions, promoting economic development, and reducing fog and haze in China. Industry accounts for the highest proportion of energy consumption, so an efficient adjustment of the industrial structure will greatly contribute to overall energy development, economic development, and environmental protection. By analyzing the sales output value of China's industrial subsectors, together with energy consumption and CO 2 emissions, this paper determines which industries should be encouraged and which industries should be restricted in China. Finally, RE strategies and industrial policies are proposed for Chinese government references. The contributions of the paper are three-fold: (1) propose a novel framework for the development of China in the aspects of energy, economy, and environmental policies; (2) provide valuable information for the Chinese government to enable it to understand which industries should be encouraged to improve its economic competitiveness; and (3) use hybrid methods (e.g., entropy method and weighted sum method) to rank the energy and CO 2 productivity, and the recommendations will provide strategic guidance for China's energy development. [Display omitted] ● China's Renewable Energy Strategy and Industrial Policy. ● Which industries should be encouraged or discouraged in China. ● Energy Productivity and CO 2 Productivity. [ABSTRACT FROM AUTHOR]

• The solar potential in different residential blocks is simulated. • The influences of block morphological parameters on solar potential are varified. • Four parameters that impact on the block solar potential more than 70% are verified. • The facade PV capacity in high-rise and hybrid residential blocks is more than 66%. • The average PV installation rate of roof, south and west facade is 96%, 32% and 39%. Block-scale application of photovoltaic technology in city is becoming a viable solution for renewable energy utilization. Rapid urbanization process has made urban buildings have huge development potential for solar energy in China, especially in residential areas that occupy large parts of the city. However, the residential blocks in China show differences in the morphological layout and parameters, which means they have diverse potential for solar energy development. This paper studies the effect of quantified morphological parameters on solar potential for residential blocks in Wuhan, China. The distribution characteristics of solar potential in different block environments are discussed. Various strategies are evaluated in terms of the installation position and height of PV modules. The results showed that floor area ratio, building density, average building height and building interval have significant impact on solar potential for residential block, and their correlation can reach 75%, 71%, 78% and 72% respectively. The average PV installation ratio of roof, south facade and west facade can reach 96%, 32% and 39% respectively. The results of this paper not only provide a reference to the block-scale application of PV technology in urban environment, but also stimulate the implementation of photovoltaic policies on various residential blocks in China. [ABSTRACT FROM AUTHOR]

• Bibliometrics overview of ZEB publications. • Draw of the collaboration networks from ZEB research publications. • Brought out thematic trend of the development ZEB over the time. • Discussions of the main challenges and solutions for ZEB studies. Zero Energy Building (ZEB) is gaining more attention as a solution to significantly mitigate the environment concerns. However, a bibliometric analysis of the topic, a very useful method to analyze the database of published publications and reviews, is lacking. Especially, to provide when and how this concept has been brought out, insights into the state-of-art technology, the findings of the collaboration networks and the challenges of ZEB. To address this gap, in this paper, ZEB studies have been reviewed using multiple perspectives and analytical tools, such as VOSviewer and Biblioshiny to analyze the collaboration networks and the thematic trends of ZEB publications. The original data was retrieved in Scopus, a total of 1051 documents including research articles and reviews published from 1976 to 2020. The analysis of the number of publications over the years shows that the development of Zero energy building research has gone through three stages: a slow development period from 1076 to 1999, followed by a development from 2000 to 2010 and finally a rapid development from 2011 to 2020. The study also reveals different rankings, including the most widely collaborated scholars, the most cited scholars, the most published countries, etc. Therein, the United State, United Kingdom and China have the most research on ZEB. Based on the analysis of co-occurrence network and evolution of thematic keywords, it is found that energy efficiency and life cycle assessment (LCA) are the main challenges for the achievement of ZEB target. Finally, these challenges have been discussed and solutions provided. [ABSTRACT FROM AUTHOR]

Energy piles have attracted much attention in recent years because they provide a profitable solution for efficient shallow geothermal energy utilization in different climatic regions. However, the long-term performance design of energy piles under different thermal scenarios currently relies on time-consuming and computationally expensive methods such as numerical simulations, which seriously hinders the further engineering application of energy piles. To this end, this paper provides a high-precision and computationally efficient model for predicting the long-term performance of energy pile design through an artificial neural network machine learning process. First, experimentally validated numerical models are developed. Then, they are utilized to generate the training and evaluate datasets for the proposed model by inputting sixty typical thermal load distributions in different regions of China. Finally, the performance of the proposed model is evaluated by comparing its calculations with those obtained using numerical models. The results show that the proposed model can predict the long-term performance of energy piles and enrich the current methods for the long-term design of energy piles. Furthermore, its features that tremendously reduce the computational time and minimum required resources make it an excellent supplement compared with numerical simulations. [ABSTRACT FROM AUTHOR]

This paper explores opportunities for effective policy intervention for residential energy savings in southern China, by analyzing achievable potential of residential energy savings in the city of Xiamen as a case study. In contrast to static technical and economic potential analyses, the achievable potential analysis is based on dynamic energy consumption projections, which consider two real-world factors: (1) gradual ramping-up adoption process of advanced technical measures; and (2) consumers’ adoption of these measures. A bottom-up type Residential Energy Consumption (REC) projection model specifically tailored for southern China was developed in this paper, based on the general logic and calculation principles utilized in the U.S. EIA’s “National Energy Modeling System (NEMS),” and the adoption theory of advanced technical measures proposed by Kastovich. This REC projection model was then used as a policy analysis tool to quantitatively evaluate the impact of various policies on residential energy savings in the case study city of Xiamen. The analysis of the Xiamen case shows that although there is a significant technical potential for residential energy savings in the city (about 20.9–24.9%), the maximum achievable potential (MAP) in 2020 is only about 8.3–8.4% of that year’s business-as-usual baseline consumption. Moreover, with existing policies only about one-fourth to half of the calculated MAP is likely to be achieved by 2020. These findings indicate that in order to realize a larger share of achievable potential for residential energy savings in China, additional and more effective polices are needed. [ABSTRACT FROM AUTHOR]

Energy and water are interdependent. Water is essential for energy production, and energy is indispensable for water processes. This paper develops a Stackelberg game based bi-level multi-objective model for optimal water allocation under uncertainties from an energy-water nexus perspective, which considers energy-related water consumption and water-related energy production. It handles the hierarchical decision-making problem between the river basin authority and the subareas, as well as the tradeoffs between social equality and ecological damage. The upper level of the model makes schemes on water allocation for multiple subareas, and the lower level decides on water allocation for different types of power generation. To generate reasonable and practical strategies for water allocation, ɛ -constraint method and KKT conditions are used. A case study of Minjiang River, China is given to demonstrate the applicability and practicality. Scenarios analysis is also conducted to demonstrate the effectiveness of the model and the effects of the control parameter changes. The results indicate that the river basin authority would allocate larger water resources to the subareas with higher energy demand. It is concluded that the proposed allocation method is advantageous to the subareas with higher water utilization efficiency. The proposed bi-level model demonstrates its reasonableness and superiority to the single-level model. Policy implications are finally provided to support the sustainable development of energy-water nexus. • A bi-level model for water allocation in energy-water nexus system is proposed. • The hierarchical decision sequence between the river basin and subareas is solved. • The tradeoffs between social equality and ecological damage are made. • Optimal water allocation for multiple subareas and energy resources are quantified. • Uncertainties in decision-making environment are handled by fuzzy set theory. [ABSTRACT FROM AUTHOR]

China's rural solar photovoltaic projects (SPVPs), as an innovative initiative to improve livelihoods through clean energy, have played a positive role in poverty reduction. However, whether this measure can enhance energy services for rural families remains unconfirmed. This paper employs a quasi-experimental method from the perspectives of energy service accessibility and affordability to quantify the net contribution of China's rural SPVPs to enhancing family energy services. The results indicate: (1) SPVPs can significantly improve family energy services, with a net effect of 14.7 % on the energy service accessibility and a net effect of 44.5 % on the energy service affordability. (2) SPVPs can increase the energy consumption capacity, energy supply capacity and energy equipment utilization rate by 2.6 %, 7.1 % and 5 %, respectively. Furthermore, these initiatives can effectively slash the energy costs of rural families by 4.3 %, bolster the energy access affordability by 3.9 %, and catapult energy investments by an impressive 44.9 %. (3) These projects also perform well in the family energy consumption cleanliness. (4) The effect of SPVPs in providing energy services presents a regional difference, with the best performance observed in 'Type III' solar resource areas. Meanwhile, the implementation of China's rural SPVPs does not involve "elite capture." • We analyze the changes of energy accessibility and affordability in rural China. • We quantify the energy services effect of solar PV projects (SPVPs). • SPVPs perform well in improving family energy consumption cleanliness. • The energy services effect of solar PV projects has spatial heterogeneity. • The implementation of China's rural SPVPs does not involve "elite capture.". [ABSTRACT FROM AUTHOR]

[Display omitted] • PCM energy storage and PV/T coupled multi-source heat pump systems were combined. • The thermal performance, energy efficiency, and economy of the system were analyzed. • The performance of paraffin C17 and water as energy storage materials were compared. • The performance of six low-temperature PCMs applied to the system were analyzed. • Compared to the existing system, it saves 56 % of energy and 27.7 % of operating costs. To improve the application of renewable energy in the heating zone, as well as to address the limitations of air and water source heat pump. The study presents a PV/T (photovoltaic/thermal) coupled air–water source heat pump system integrated with phase change energy storage. A theoretical analytical model and TRNSYS simulation model of the system were developed to evaluate the thermal performance, energy efficiency and economics of the system. The performance of phase change energy storage was compared with that of water storage, and the effect of different phase change materials on the system characteristics. The results show that the coupled system achieves a seasonal performance factor of 2.3, a 56 % reduction in energy consumption, and a 27.7 % reduction in operating costs compared to a conventional gas boiler system. Comparative analysis with the water storage system showed that the system equipped with phase change materials performed well in terms of energy consumption, operating costs and heating stability. In addition, the density of the phase change material has a biased effect on the overall performance of the system. This paper can provide a reference value for the study of renewable energy heating systems in cold zone. [ABSTRACT FROM AUTHOR]

The battery electric vehicle (BEV) industry, commanding over half of the global market share in China, has garnered significant attention in response to escalating concerns about climate change. NCM (LiNi x Co y Mn z O 2) batteries, prized for their high energy density, are pivotal in this industry. However, their production relies on critical metals, posing environmental challenges. Recycling processes aim to address this issue by recovering critical metals from end-of-life batteries. The industry is updating from NCM 111 to NCM 811 batteries to enhance energy density and reduce costs, but the key factors influencing the material flows and environmental impacts remain uncertain. This paper aims to identify the key factors contributing to the potential differences in material flows and environmental impacts introduced by the NCM battery upgrading in China. Following the new energy vehicle sales projections in China until 2035, a dynamic material flow analysis was employed to calculate material demands, recovered amounts, and substitution rates for various upgrading scenarios. The study reveals that the majority of retired batteries until 2035 were sold between 2022 and 2029. Material substitution rates prove to be more sensitive to the upgrading scenario than the lifetime and growth rate of BEVs. Faster NCM 811 penetration results in over 2.5 times more saved cobalt demand compared to additional nickel demand. A life cycle assessment of NCM batteries reveals a 39% lower global warming impact for NCM 811 compared to NCM 111, highlighting environmental benefits from increased energy density and reduced cobalt consumption. The energy density improvement contributed 85%, while the alteration in material composition contributed 15% to the global warming reduction in NCM 811. Recycling emerges as a crucial strategy in mitigating environmental impacts across all categories, particularly addressing eutrophication, previously deemed challenging due to the difficulty in recovering Li 2 CO 3. [ABSTRACT FROM AUTHOR]

The transfer of energy-intensive projects to areas abundant in clean energy resources holds promise for optimizing the energy structure. After obtaining specific information on transferred projects of listed energy-intensive firms through search or phone contact, this paper innovatively constructs a three-dimensional panel containing 1,859,220 observations to empirically examine the attraction of clean energy to energy-intensive projects under the carbon intensity constraint policy (CICP). Our findings reveal that: (1) the CICP promotes the transfer of gray energy-intensive projects, leading to the transfer structure trending towards graying. (2) Furthermore, we observe a positive correlation between the proportion of thermal power in transfer-out areas and the outflow of gray energy-intensive projects. Conversely, areas with higher wind power and photovoltaics attract a greater inflow of gray energy-intensive projects. (3) Notably, clean energy predominantly attracts the inflow of gray projects rather than green projects. Our findings provide micro evidence and valuable insights into the transfer of energy-intensive industries, informing the design and implementation of future environmental policies for policymakers and stakeholders. [ABSTRACT FROM AUTHOR]

This paper focuses on energy poverty dynamics by answering one question: Does energy poverty trap exist in Chinese cities? For this purpose, we examine the co-evolution between per capita energy consumption and income for 286 prefectural-and-above level cities in China over the period 2002 to 2014. A nonparametric joint-distribution dynamics approach is employed in the analysis. Both static and dynamic distribution analyses demonstrate significant evidence of club convergence in energy consumption across Chinese cities, and there are multiple equilibria between per capita energy consumption and income in the long-run distribution. The results also suggest that considerable cities fall into energy poverty trap, a chronic state with low income and low energy consumption. Therefore, we can argue that energy poverty is not a transitory state for those cities and support the existence of energy poverty trap in China. Our findings highlight the need to tailor policies aimed at reducing energy poverty in low-income cities. • We examine the co-evolution between per capita energy consumption and income in China. • A dataset of China's 286 prefecture-level cities during 2002–2014 is explored. • The results argue club convergence in energy consumption across Chinese cities. • Considerable cities fall into energy poverty trap. • The study supports the existence of energy poverty trap in China. [ABSTRACT FROM AUTHOR]

• The distribution characteristics of CaS in the radial direction of the hearth were analyzed. • The formation mechanism and migration process of CaS in the hearth were analyzed. • The interface reaction between slag and coke is the main source of CaS formation in the furnace hearth. As the main occurrence form of sulfur element in blast furnace hearth, high content of CaS within the blast furnace hearth have a certain impact on low-carbon smelting of blast furnace. In this paper, the micro-morphology and distribution of CaS in the hearth area are studied by scanning electron microscopy and industrial CT, and the formation process of CaS in the deadman is clarified by drilling core samples of residual iron in the hearth of 3200 m3 blast furnace in China. The research results indicate that CaS in the hearth is mainly formed by slag-coke interface reaction and slag-iron interface reaction. Based on an analysis of the relative difficulty of these two pathways, it was observed that CaS is more readily generated through the slag-coke interface reaction. Based on the analysis of the difficulty of the two generation paths, it is found that CaS in the blast furnace hearth is more easily generated through slag coke interface reaction. The CaS particles generated in the hearth take the slag as the growth matrix, and with the flow of slag and iron and the renewal of the deadman coke, they are finally enriched and precipitated in the edge area of the deadman in the form of agglomerates. Based on the formation mechanism of CaS in the hearth, it is analyzed that the formation of CaS aggregates in the hearth is mainly affected by three factors: sulfur load, slag basicity and hearth temperature. This study provides a certain theoretical reference and guidance for steel enterprises aiming to reduce fuel consumption and achieve green production practices. [ABSTRACT FROM AUTHOR]

Prefabricated buildings (PB) are assembled using prefabricated components, known for their cost-effectiveness and high efficiency. They are seen as an effective means to achieving sustainable development goals and mitigating climate change. This paper examines the impact of prefabricated buildings on urban green total factor energy efficiency (GTFEE) using panel data from 278 cities in China. The analysis is conducted through the application of a super-efficiency slack-based measure (SBM) model and a difference-in-differences model. The results of the study indicate that the promotion of PB can significantly improve urban GTFEE; there is heterogeneity in the improvement of urban GTFEE by PB; the innovation effect, industrial effect and marketization effect of PB are the main ways to improve urban GTFEE. Specifically, PB exerts an innovation effect by promoting technological innovation. It influences consumer and investor demand, leading to increased activity in the secondary industry, thereby creating an industrial effect. Moreover, PB facilitates the marketization effect by phasing out outdated industries, encouraging autonomous enterprise innovation, and fostering the growth of new advanced enterprises. This study reveals the critical role of PB in urban GTFEE improvement. It clarifies its mechanism of action, which provides a reference for urban sustainable development strategies and energy efficiency. • Prefabricated buildings can improve green total-factor energy efficiency. • Urban green total-factor energy efficiency has been measured. • PB improves GTFEE through innovation, industry and marketization effect. [ABSTRACT FROM AUTHOR]

Government auditing plays a crucial role in enhancing energy efficiency and advancing green and low-carbon economic development. Given that audit oversight's quality and efficiency are influenced by the independence of auditing institutions, this study utilizes the vertical management reform of government auditing institutions as an exogenous shock, and empirically examines its impact on urban energy efficiency (UEE) using a Difference-in-Differences model (DID). We find that the audit reform improved UEE by 0.023 which is both economically and statistically significant. Concurrently, the audit reform and the development of the digital economy play substitutive roles in enhancing UEE. Finally, the results of the mediation analysis using the stepwise regression method indicate that the improvements in audit efficiency, green technology innovation, and energy structure optimization have mediated the promotion of UEE in the audit reform process, accounting for respective mediation effects of 4.35%, 4.35%, and 8.69%. • We investigate the audit independence from the level of audit management systems. • This paper finds a substitution effect of digital economic development. • The study discusses the heterogeneity in audit oversight from a global perspective. [ABSTRACT FROM AUTHOR]

Industrial steam heating is a significant aspect of energy consumption in China, playing a crucial role in industrial energy efficiency. Historically, demand response research has predominantly focused on the electricity sector, with limited emphasis on steam supply. This study explores a novel Time-of-Use pricing approach for steam heating systems, anchored in the demand response theory of price incentives. It develops a peak-valley segmentation method by considering both the load differences between supply and demand and the thermal storage capacity of the pipeline system. Additionally, the paper delves into user response characteristics to formulate an optimized Time-of-Use pricing model for steam heating systems. Implemented in a Jiangsu-based case study, the model demonstrates significant efficiency improvements: it reduces the peak-valley load difference by up to 68.3% and cuts steam purchasing costs by ¥135,000. Furthermore, the alignment between the users' total steam load curve and the heat source's steam supply is enhanced by 18.8%, illustrating the model's effectiveness in balancing demand and supply. • Cluster analysis to extract steam user load characteristics. • Divide peak/valley times based on network storage and user traits. • Create a multi-objective Time-of-Use model for steam pricing optimization. • Carry out a case validation in an actual industrial park in Jiangsu. [ABSTRACT FROM AUTHOR]

With the growing share of the climate-sensitive renewable energy market supply in China, estimating future energy drought risk (ED) is essential. In this paper, based on CMIP6, energy demand and power generation are estimated from 2023 to 2100 under SSP2-4.5 and SSP5-8.5 climate scenarios, and ED is defined from high demand (HD), low wind-solar generation (LWS), and residual load (RL). The results show that the ED exacerbation is relatively high under the SSP5-8.5. Between 2023 and 2100, the duration and severity of HD and RL notably increase, while LWS changes are relatively weak. We find that HD and RL exhibit high summer risks in the south and high winter risk in the north. The return periods vary significantly and extends over time in most regions. Moreover, there are few ED when the installed power generation capacity (IPGC) is increased. When the IPGC increases by 2%–5%, the LWS will decrease at least 20%–72%. With a 10% increase, the LWS will be mitigated by at least 80%, whereas the mitigation for RL is limited, approximately 3–17% at different rates. This work performs the first evaluation of future ED and provides the useful references for risk mitigation in China based on CMIP6. [ABSTRACT FROM AUTHOR]

This paper presents an analysis of the water-energy-food nexus (WEFN) system, focusing on its interlinked structure and dynamic characteristics. This paper proposes a dynamic series-loop data envelopment analysis (DEA) model with a directional distance function for measuring WEFN efficiency in China. A spatial Durbin model is constructed to investigate the impact of extreme temperatures on WEFN efficiency. The results are as follows. (1) Compared with the black-box DEA model and series network DEA model, a series-loop network DEA model can reflect the "networking effect" and "looping effect" in the WEFN system. (2) The WEFN system performs well with an average series-loop efficiency of 0.875, but the efficiency of the water subsystem scores low and needs improvement. (3) At the national level, extremely high and low temperatures have no significant effect on the WEFN efficiency in local or adjacent provinces, whereas average temperature promotes the WEFN efficiency in local provinces but hinders it in neighboring provinces. In the regions with a low temperature difference, average temperature has no impact on the WEFN efficiency of both the province itself and its neighboring provinces. Overall, this study provides valuable insights into the complex interlinkages within the WEFN system and highlights the importance of considering these relationships when improving the system efficiency. [ABSTRACT FROM AUTHOR]

With the fragmentation of global production, the share of intermediate trade in international trade has increased significantly. Nevertheless, more research must be done on how intermediate trade factors influence energy consumption. This paper utilized the multi-regional input-output (MRIO) model to categorize China's energy utilization into six parts based on its position within the global production chain. Additionally, it examined the impact of intermediate factors on China's energy consumption through index decomposition analysis (IDA). The results revealed that: (1) from 2000 to 2014, intermediate factors led to an increase of 1380.96Mtces in China's energy consumption, accounting for around 37% of the national total; (2) the reduction in efficiency is the primary cause of the surge in domestic intermediate energy consumption, while the increase in market proportion is the dominant driver promoting international intermediate energy consumption growth; (3) the international intermediate proportion contributed the most among all intermediate factors. Drawing upon the findings above, this paper proposed policy recommendations to regulate China's rising energy consumption, precisely the escalation of intermediate process energy usage, focusing on the global production chain. [Display omitted] • Energy consumption is divided into six parts based on the intermediate destination. • Fifteen factors is decomposed based on index decomposition analysis. • The contributions of the structure, proportion, and efficiency changes is considered. • This paper shows a way of identifying the composition of energy consumption. [ABSTRACT FROM AUTHOR]

Cities have emerged as critical and challenging places for promoting the green and low-carbon transformation of the economy and society in the context of the "dual carbon" targets. Meanwhile, fiscal policy is also an indispensable component of the public policy framework supporting the green and low-carbon transformation. This paper uses the pilot project of "Comprehensive Demonstration Cities for Energy Conservation and Emission Reduction Fiscal Policies" ("ECER-CD" policy) implemented in China since 2011 as a quasi-natural experiment. This research theoretically analyzes and empirically tests the energy conservation and emission reduction effects of fiscal policies supporting green and low-carbon transformation utilizing methodologies such as time-varying DID and multiple periods and multiple groups of DID. The study finds that the pilot cities effectively reverse the behavioural bias of local governments and promote energy conservation and emission reduction efforts. This conclusion holds after undergoing robustness tests such as parallel trend analysis and heterogeneity treatment effects. The effectiveness of the pilot policy is attributed to the upgrade of industrial structure, improvement of energy efficiency, and the effects of green technology innovation. However, cities' geographic location and resource dependency can interfere with the effective implementation of policies. This paper also further explores the environmental dividends and economic consequences of the policy and finds that the pilot cities have certain environmental dividends and do not significantly restrain economic and social development. This study broadens the research perspective on fiscal policies in energy conservation and emission reduction and clarifies the pathways through which fiscal policies promoting green, low-carbon transformation drive energy conservation and emission reduction in cities. Moreover, it also improves the use of the Difference-in-Differences method in evaluating policy effects in scenarios such as the overlapping implementation of pilot policies and policy withdrawal. Finally, this paper proposes policy recommendations to provide more empirical evidence for China to accelerate the green and low-carbon transformation of the economy and society. [ABSTRACT FROM AUTHOR]

Whether renewable energy consumption is beneficial to reducing CO 2 emission intensity and carbon emissions in the context of the goal of "carbon peak and carbon neutrality" in China. To prove this conjecture, considering the spatial spillover effect of carbon dioxide, this paper adopts the spatial Dubin model for empirical analysis based on the panel data of China's 30 provinces over the period 2002–2019. This study explores the CO 2 intensity mitigation effect of China's renewable energy consumption and further investigates the mediation role of technological innovation, industrial structure upgrading and optimization, and energy efficiency in the nexus between renewable energy consumption and carbon intensity. The main findings present that: (1) China's carbon emission intensity is characterized by significant spatial correlation; (2) Renewable energy consumption can significantly reduce carbon intensity and per capita carbon emissions; (3) The mediation effect of renewable energy consumption in reducing carbon emission intensity is to promote technological innovation and industrial structure upgrading, as well as improve energy efficiency. Based on the conclusions, this paper offers several policy implications for governments to reduce CO 2 emission intensity. • The impact of renewable energy consumption on CO 2 emission intensity is explored. • Renewable energy consumption can reduce carbon emission intensity and per capita carbon emissions. • Renewable energy consumption reduces CO 2 intensity through the spatial mediation effect. [ABSTRACT FROM AUTHOR]