Search

Power control is becoming increasingly essential for the fifth-generation (5G) and beyond systems. An example use-case, among others, is the unmanned-aerial-vehicle (UAV) communications where the nearly line-of-sight (LoS) radio channels may result in very low signal-to-interference-plus-noise ratios (SINRs). The authors in (Chiang et al., 2007) proposed to efficiently and reliably solve this kind of non-convex problem via a series of geometrical programmings (GPs) using condensation approximation. However, it is only applicable for a small-scale network with several communication pairs and practically infeasible with more (e.g., tens of) nodes to be jointly optimized. We therefore in this paper aim to provide new insights into this problem. By properly introducing auxiliary variables, the problem is transformed to an equivalent form which is simpler and more intuitive for condensation. A novel condensation method with linear complexity is also proposed based on the form. The enhancements make the GP-based power control feasible for both small- and especially large-scale networks that are common in 5G and beyond. The algorithm is verified via simulations. A preliminary case study of uplink UAV communications also shows the potential of the algorithm. [ABSTRACT FROM AUTHOR]

In the heterogeneous networks (HetNets), the downlink-uplink decoupled (DUDE) user association is a very promising technology that can employ different association strategies for uplink and downlink. The DUDE mode has great potential for improving system capacity and frequency efficiency. However, interference between the DUDE user equipment (DUDE UE), macro user equipment (MUE) and small user equipment (SUE) still needs to be considered and properly tackled. Therefore, this paper presents an optimization scheme of frequency allocation and power control to improve the communication quality of users. Firstly, the multiple region frequency allocation (MRFA) scheme is proposed for non-uniform user distribution to alleviate interference among users and allocate spectrum resources equally to dense users. This scheme is modelled as a sub-region partition problem with maximum sum rate, which can disperse densely distributed users to different sub-bands for transmission. Secondly, the convergent power control (CPC) algorithm is considered to improve the transmission performance of each user. It can converge the transmit power to the optimal transmit power for reducing interference among co-channel users when there is no disturbance in the network. The CPC algorithm can also make the signal-to-interference-plus-noise-ratio (SINR) of each active user always greater than the target threshold until the end of communication by dynamically adjusting the transmit power of users. Simulation results show that the joint scheme of MRFA and CPC achieves a higher system throughput and better user performance than existing frequency allocation schemes or power control schemes. [ABSTRACT FROM AUTHOR]

Layered transmission is studied in this paper to accommodate various device capabilities and channel conditions. The problem of efficiently broadcasting a common set of layer-encoded data from a single base station to multiple users over quasi-static fading channels is examined. Considering the maximum tolerable delay, a block-level utility is defined in terms of average probability of successful reception of each layer. Based on non-orthogonal multiple access scheme, we propose a complete algorithm to jointly optimize power allocation and transmission rates. By utilizing the idea of opportunistic scheduling, we first derive the success probability of one single layer in homogeneous scenarios, then extend the results to heterogeneous scenarios where users are subject to different channel statistics. The multi-layer optimization is realized by iteratively repeating the single-layer operations. Starting from the base layer, we first choose an optimal subset of users as the corresponding target group, then apply the single-layer allocation process until no power resources are left. Computer simulation and discussion confirm that our method maximizes the block-level utility at the same time balances the tradeoff between multiuser diversity gain and multicast gain. [ABSTRACT FROM AUTHOR]

In this paper, a power allocation space-time coding scheme based on the self-coding property of residual loop interference (RLI) for two-way full-duplex (FD) amplify-and-forward (AF) relaying networks is proposed. The relay and direct link cooperate to forward the received signals to destination node, forming the self-coded distributed space-time code, in which the relay performs self-coding using the RLI after implementing some self-interference cancellation techniques. Then, an iterative power allocation algorithm is presented. With the proposed power allocation algorithm, both amplifying factor and transmit powers of terminal nodes are jointly optimized to maximize the smaller signal-to-interference-plus-noise ratio (SINR) of terminal nodes under a total power constraint when estimated instantaneous channel state information is available. We theoretically demonstrate the benefits of the proposed power allocation algorithm compared to equal power allocation. Simulation results show that the proposed scheme achieves significant improvement in performance compared with existing schemes for FD relaying systems and half-duplex relaying systems. [ABSTRACT FROM AUTHOR]

Interference alignment (IA) is a promising technique for interference management and can be applied to spectrum sharing in cognitive radio (CR) networks. However, the sum rate may fall short of the theoretical maximum, particularly at low signal-to-noise ratio (SNR), and the quality of service (QoS) of the primary user (PU) may not be guaranteed. In addition, power allocation (PA) in IA-based CR networks is largely ignored, which can further improve its performance. Thus, in this paper, PA in IA-based CR networks is studied. To guarantee the QoS requirement of the PU, its minimal transmitted power is derived. Then, we propose three PA algorithms to maximize the throughput of secondary users (SUs), the energy efficiency (EE) of the network, and the requirements of SUs, respectively, while guaranteeing the QoS of the PU. To reduce the complexity, the closed-form solutions of these algorithms are further studied in detail. The outage probability of the PU according to its rate threshold is also derived to analyze the performance of these algorithms. Moreover, we propose a transmission-mode adaptation scheme to further improve the PU's performance when its QoS requirement cannot be guaranteed at low SNR, and it can be easily combined with the proposed PA algorithms. Simulation results are presented to show the effectiveness of the proposed adaptive PA algorithms for IA-based CR networks. [ABSTRACT FROM AUTHOR]

This paper deals with joint source and relay beamforming (BF) design for an amplify-and-forward (AF) multiantenna multirelay network. Considering that the channel state information (CSI) from relays to a destination is imperfect, we aim to maximize the worst-case received signal-to-noise ratio (SNR). The associated optimization problem is then solved in two steps. In the first step, by fixing the source BF vector, a semi-closed-form solution of the relay BF matrices is obtained, up to a power-allocation factor. In the second step, the global optimal source BF vector is obtained based on the polyblock outer approximation (PA) algorithm. We also propose two low-complexity methods for obtaining the source BF vector, which differ in their complexity and performances. The optimal joint source and relay BF solution obtained by the proposed algorithms serves as the benchmark for evaluating the existing schemes and the proposed low-complexity methods. Simulation results show that the proposed robust design can significantly reduce the sensitivity of the channel uncertainty to the system performance. [ABSTRACT FROM AUTHOR]

One of the key challenges in wireless networking is allocating the available radio resources to maximize key service delivery parameters such as the aggregate throughput and the multimedia quality of experience (QoE). We propose a novel and effective scheduling policy that allocates resource blocks, such that interference power is shifted toward capacity-saturated users, while improving the throughput of unsaturated users. The highlight of this paper is that the proposed scheme can dramatically improve the performance of cells that have a high discrepancy in its signal-to-noise ratio (SNR) distribution, which is typical in urban areas. The results show that a free-lunch (FL) solution is possible, whereby for negligible performance degradation in the saturated users, a large improvement in the nonsaturated users can be obtained. However, on average, the number of FL user pairings is low. By relaxing the degradation constraints, the non-FL (NFL) solution can yield a greater multiuser throughput gain. Motivated by a surge in mobile multimedia traffic, we further demonstrate that the proposed scheduling may have a profound impact on both energy efficiency and QoE of multimedia service delivery. [ABSTRACT FROM PUBLISHER]

In this paper, low-complexity joint power assignment algorithms are developed for multi-source multi-destination relay networks where multiple sources share a common relay that forwards all received signals simultaneously to destinations. In particular, we consider the following power optimization strategies: (i) Minimization of the total transmission power of the sources and the relay under the constraint that the signal-to-interference-plus-noise ratio (SINR) requirement of each source-destination pair is satisfied, and (ii) Maximization of the minimum SINR among all source-destination pairs subject to any given total power budget. Both optimization problems involve K power variables, where K is the number of source-destination pairs in the network, and an exhaustive search is prohibitive for large K. In this work, we develop a methodology that allows us to obtain an asymptotically tight approximation of the SINR and reformulate the original optimization problems to single-variable optimization problems, which can be easily solved by numerical search of the single variable. Then, the corresponding optimal transmission power at each source and relay can be calculated directly. The proposed optimization schemes are scalable and lead to power assignment algorithms that exhibit the same optimization complexity for any number (K) of source-destination pairs in the network. Moreover, we apply the methodology that we developed to solve a related max-min SINR based optimization problem in which we determine power assignment for the sources and the relay to maximize the minimum SINR among all source-destination pairs subject to any given total power budget. Extensive numerical studies illustrate and validate our theoretical developments. [ABSTRACT FROM AUTHOR]

This paper presents a joint subcarrier and power allocation algorithm for cooperative multiuser orthogonal frequency division multiplexing (MU-OFDM) cognitive radio (CR) systems. By simplifying a three-node relay network to a two-node network with the equivalent channel gain, we formulate the resource allocation problem for a cooperative MU-OFDM CR system in a similar form to that for a non-cooperative MU-OFDM CR system. With this problem formulation, a rule is derived for performing subcarrier assignment operations under a given power distribution, where the sum capacity optimization is alternated between the subcarrier and power to form a joint subcarrier and power allocation algorithm. To simplify the high-complexity optimal power allocation algorithm (i.e., the iterative partitioned water-filling algorithm) for the joint scheme, we further develop a simple method for updating the water level when each subcarrier is assigned. Simulation results show that, with or without cooperative transmission, using the proposed method to update the water level achieves a system capacity close to that of the joint subcarrier and power allocation algorithm with the optimal power distribution. In addition, if the relay node is at the midpoint between the source and destination, the system capacity can reach its maximum value. [ABSTRACT FROM AUTHOR]

In this paper, we consider beamforming (BF) for cooperative networks with one multi—antenna source, multiple multi—antenna amplify—and—forward (AF) relays, and one single—antenna destination. The source BF vector and the AF—BF matrices at the relays are optimized for maximization of the signal—to—noise ratio (SNR) at the destination under three different power constraints. In particular, we consider individual relay power constraints, a joint relay power constraint, and a joint power constraint for the source and the relays. We solve the associated optimization problems in two stages. In the first stage, we find the optimal AF—BF matrices for a given BF vector at the source. For the cases of individual and joint relay power constraints, closed—form solutions for the AF—BF matrices are provided, respectively. Furthermore, for the case of a joint source—relay power constraint, the AF—BF matrices are obtained in closed form up to a scalar power allocation factor and an efficient numerical algorithm for the power allocation between the source and the relays is given. In the second stage, the optimal source BF vectors are computed. Thereby, we show that for the joint relay and the joint source—relay power constraints, the resulting problem can be transformed into a non—convex polynomial programming problem which allows for an exact solution for small—scale networks. For large—scale networks and networks with individual relay power constraints, we propose efficient suboptimal optimization methods for the source BF vector. Simulation results show the benefits of having multiple antennas at the source and/or multiple multi—antenna relays and illustrate the performance differences introduced by the three different power constraints. [ABSTRACT FROM AUTHOR]