Search

Voltage source converter (VSC)‐based high‐voltage dc (HVDC) transmission is widely utilised nowadays. However, a VSC‐HVDC connected to a weak ac system still faces the problem of phase‐locked loop (PLL) synchronisation. To tackle this problem, this study proposes a dc voltage synchronisation control (DCSC) based on the power synchronisation control and the power balance equation of the virtual synchronous generator. To analyse the dynamic stability of DCSC, voltage sensitivity indicator (VSI) is used to reflect the voltage fluctuations. Considering the deviations of dc voltage and converter losses, a closed‐loop transfer function of dc voltage is designed. Three important parameters including VSI, virtual damping coefficient and inertia time constant are investigated. The dynamic stability analysis shows DCSC has strong controllability. Then, a three terminals VSC‐MTDC model is simulated in PSCAD/EMTDC. Herein, DCSC is used in one inverter and PLL is used in another inverter. The waveforms obtained by using DCSC are compared with that by using PLL. Simulation results clearly depict that the inverter with DCSC has a normal steady state and a better transient response than using PLL when connected to a strong ac system, also provides better power transfer capability when connected to a weak ac system. [ABSTRACT FROM AUTHOR]

A hierarchical distributed control method for I–V droop‐controlled‐paralleled DC–DC converters in DC microgrid is proposed. The control structure includes primary, secondary, and tertiary levels. The secondary control level is used to remove the DC voltage deviation and improve the current sharing accuracy. An improved dynamic consensus algorithm is used in the secondary control to calculate the average values of bus voltage and voltage restoration in distributed control. In the tertiary control level, as the main contribution in this study, the system conversion efficiency is enhanced by using the average restoration value obtained in the secondary control level, instead of using the total load current which needs more communication traffic. When the converters are connected to batteries, the method for the state of charge (SoC) management is proposed so that the SoC balance can be guaranteed. The effectiveness of the proposed method is verified by detailed experimental tests based on four 0.7 kW DC–DC converters. [ABSTRACT FROM AUTHOR]