Search

This paper presents a decision-making approach grounded in rough set theory and evidential reasoning to address the demand for expert decision-making in greenhouse environmental control systems. Furthermore, a decision-making model is developed by integrating the D-S evidence theory with an expert knowledge table for greenhouse environmental control systems. The model's reasoning process encompasses continuous attribute discretization, expert decision table formation, attribute reduction, and evidence combination reasoning. Firstly, the fuzzy C-means clustering algorithm is employed to discretize the original environmental data and cluster it. Subsequently, an attribute reduction algorithm based on information entropy is utilized to optimize the decision table by eliminating unnecessary conditional attributes in expert knowledge. The reduced indicators are then combined using evidential theory. Finally, suitable greenhouse control methods are determined by the confidence decision proposed by the D-S evidence theory. To assess the efficacy of this intelligent decision-making algorithm based on rough set and D-S evidence theory, its performance is compared with traditional SVM algorithms and small-shot learning algorithms. The results indicate that this proposed method significantly enhances the credibility of control decision-making processes, with an average running time of 0.002378s for the fusion decision algorithm and 0.017939s for the support vector machine (SVM) algorithm, respectively. The SVM accuracy rate after testing and training stands at 90.34%. Moreover, retraining based on information entropy attribute reduction leads to a correct decision rate increase of up to 100%. This method notably improves confidence levels in decision-making processes while reducing uncertainty and demonstrates reliability when applied in making decisions regarding greenhouse environments. [ABSTRACT FROM AUTHOR]

The progressive iterative approximation (PIA) is a versatile method for interpolating or fitting a given data set. The convergence behavior of PIA plays a pivotal role in determining the computational efficiency of data interpolation or fitting. This paper introduces an accelerated iterative approach, GS-PIA, derived from the Gauss-Seidel splitting, specifically designed for interpolating data points. The convergence and computational cost of the proposed iterative method are discussed. Numerical results underscore the superiority of GS-PIA in data interpolation when compared to other existing methods. [ABSTRACT FROM AUTHOR]

There are several classical characterisations of the valuative dimension of a commutative ring. Constructive versions of this dimension have been given and proven to be equivalent to the classical notion within classical mathematics, and they can be used for the usual examples of commutative rings. To the contrary of the classical versions, the constructive versions have a clear computational content. This paper investigates the computational relationship between three possible constructive definitions of the valuative dimension of a commutative ring. In doing so, it proves these constructive versions to be equivalent within constructive mathematics. [ABSTRACT FROM AUTHOR]

Nowadays, Mobile Ad hoc Network (MANET) gains more attraction due to its seamless and dynamic use. The existing methods in MANET are plagued by some weaknesses, like higher computation time, undermining their real-time responsiveness. Whereas, lower accuracy in intrusion detection compromises the reliability of these systems, potentially leading to missed threats posing a challenge for effective security measures in dynamic MANET environments. To mitigate these weaknesses, an Auto Metric Graph Neural Network optimized with Woodpecker Mating Algorithm is proposed in this paper for detecting Network Layer Attack in MANET (AGNN-WMA-DNLA-MANET). Initially, the data are gathered from CIC-IDS 2019 dataset. The gathered data undergoes pre-processing to eliminate redundancy and missing values replacement using the Local Least Squares method. Afterward, the preprocessing output is fed to AGNN for classification, which classifies the attack as active, passive, or normal. Then, Woodpecker Mating Algorithm (WMA) is proposed to optimize the AGNN weight parameters to ensure the accurate classification. The proposed technique is executed in NS2 tool. The metrics, like accuracy, false positive rate (FPR) and attack detection rate (ADR), computation time, and RoC is analyzed. The proposed AGNN-WMA-DNLA-MANET approach provides 14.68%, 7.142%, and 4.65% higher accuracy for active attack, 15.19%, 2.77%, and 9.85% higher accuracy for passive attack and 38.18%, 12.02%, and 7.59% better accuracy for normal compared with existing methods, such as Dependable intrusion detection scheme under deep convolutional neural network (DCNN-MANET), deep learning-based intrusion detection scheme for MANET (AE-DNN-MANET), and Benchmarking of machine learning for anomaly based intrusion detection scheme (ML-MANET), respectively. [ABSTRACT FROM AUTHOR]

In this paper, a new method based on the Tufts–Kumaresan (TK) algorithm is used to process nonstationary signals and extract system modes. This new algorithm for mode estimation is proposed to improve estimation accuracy under dynamic conditions. The key contribution in TK is the use of multiple orthogonal sliding windows rather than a single pair of sliding windows. Simulation results under various scenarios, such as different types of faults and load changes are used to evaluate the performance of the proposed method. The proposed method will accurately extract system modes. This method will also reduce the required memory and the calculation time of estimation in nonstationary signals. In complement to successful applications in studying the dynamic behavior of the power system, identifying and analyzing low-frequency electromechanical oscillations, and removing signal noise, this method can accurately estimate the modes of a power system. To validate the accuracy of the proposed method, the Wavelet and the Prony methods have been used for comparison. The proposed method is implemented using simulated ringdown data of standard two-area power system and real measurement data of the WSCC system breakup on 10 August 1996. [ABSTRACT FROM AUTHOR]

Collision accidents of construction vehicles frequently occur during the construction of building projects. It is difficult to warn of collision risk efficiently by using the safety control methods of on-site inspection and viewing surveillance video. Therefore, a novel collision risk warning model for construction vehicles is proposed in this paper. The model comprises a state awareness module and a collision risk assessment module. In the state awareness module, the YOLOv7 algorithm is used to identify and locate construction vehicles. The DeepSORT algorithm is used for the real-time tracking of construction vehicles. Finally, the state awareness module obtains a wealth of sensing information and provides it to the collision risk assessment module. In the collision risk assessment module, the speed assessment method and the minimum safety distance assessment method of construction vehicles are innovatively proposed and compiled. In the speed assessment method, the speed of construction vehicles is calculated and speeding warnings are performed using the transformation matrix between latitude and longitude coordinates and image pixel coordinates. In the minimum safety distance assessment method, the original surveillance picture is converted into a bird's eye view (BEV) of the world coordinate system through inverse perspective mapping (IPM). Then the distance of all construction vehicles is traversed, and the visual warning of the minimum safe distance is provided. The effectiveness and robustness of this collision risk warning model were verified by taking three practical projects in different construction stages as examples. The research results show that the mean average precision (mAP@0.5:0.95) of the construction vehicles collision risk warning model can reach 89.10%, and it has a good tracking effect and an efficient collision risk warning strategy. [ABSTRACT FROM AUTHOR]

Summary: In order to achieve efficiency extremum of power conversion independent of parameter values and operational mode, an adaptive dual‐controller on‐line efficiency optimization method is presented in this paper. Firstly, based on tri‐modal analysis for four‐switch buck‐boost (FSBB) converter, efficiency extremum analysis is given and existed for such this converter. Then, adaptive dual controller on‐line efficiency seeking algorithm is shown to adaptive two variables for efficiency optimization and output voltage regulation. Furthermore, perturb and observe detector is described to realize control variables decoupling of dual‐controller and to prevent the instability of the whole system during the algorithm tuning process and to improve the algorithm speed of the dual controller. The proposed method is model independent and does not depend on the circuit parameter values. The detail implement of algorithm and performance analysis is given, and the experimental platform and experimental results are put forward to verify the effectiveness of the algorithm. [ABSTRACT FROM AUTHOR]

Cloud data centers face various challenges, such as high energy consumption, environmental impact, and quality of service (QoS) requirements. Dynamic virtual machine (VM) consolidation is an effective approach to address these challenges, but it is a complex optimization problem that involves trade-offs between energy efficiency and QoS satisfaction. Moreover, the workload patterns in cloud data centers are often non-stationary and unpredictable, which makes it difficult to model them. In this paper, we propose a new method for dynamic VM consolidation that optimizes both energy efficiency and QoS objectives. Our approach is based on Markov chains and the artificial feeding birds (AFB) algorithm. Markov chains are used to model the resource utilization of each individual VM and PM based on the changes that happen in workload data. AFB algorithm is a metaheuristic optimization technique that mimics the behavior of birds in nature. We modify the AFB algorithm to suit the characteristics of the VM placement problem and to provide QoS-aware and energy-efficient solutions. Our approach also employs an online step detection method to capture variations in workload patterns. Furthermore, we introduce a new policy for VM selection from overloaded hosts, which considers the abrupt changes in the utilization processes of the VMs. The proposed algorithms are evaluated extensively using the CloudSim Toolkit with real workload data. The proposed system outperforms evaluation policies in multiple metrics, including energy consumption, SLA violations, and other essential metrics. [ABSTRACT FROM AUTHOR]

In this paper, we study a discrete momentum consensus-based optimization (Momentum-CBO) algorithm which corresponds to a second-order generalization of the discrete first-order CBO [S.-Y. Ha, S. Jin and D. Kim, Convergence of a first-order consensus-based global optimization algorithm, Math. Models Methods Appl. Sci. 30 (2020) 2417–2444]. The proposed algorithm can be understood as the modification of ADAM-CBO, replacing the normalization term by unity. For the proposed Momentum-CBO, we provide a sufficient framework which guarantees the convergence of algorithm toward a global minimum of the objective function. Moreover, we present several experimental results showing that Momentum-CBO has an improved success rate of finding the global minimum compared to vanilla-CBO and show the stability of Momentum-CBO under different initialization schemes. We also show that Momentum-CBO can be used as the alternative of ADAM-CBO which does not have a proper convergence analysis. Finally, we give an application of Momentum-CBO for Lyapunov function approximation using symbolic regression techniques. [ABSTRACT FROM AUTHOR]

This paper presents a novel hybrid algorithm based on CMOGWO-ADNSGA-II to solve the vibration stability problem during the operation of a EMS-type maglev train dynamics model subjected to strong non-linear magnetic buoyancy. The proposed algorithm optimizes the control system parameters of EMS-type maglev train suspensions by combining an improved multi-objective chaotic grey wolf algorithm (CMOGWO) with an improved non-dominated Sorting genetic algorithm-II (ADNSGA-II) to enhance the search capability of the algorithm and ensure population diversity. The efficacy of the algorithm is demonstrated by applying it to the EMS-type maglev train suspension frame control system to find the optimal control parameters. Experimental results show that the system with the optimal parameters applied significantly reduces the suspension gap amplitude and the corresponding standard deviation, as well as the vertical acceleration amplitude and the corresponding standard deviation during operation. The proposed algorithm provides a good solution for EMS-type maglev train suspension vibration control, which can improve its performance and safety. [ABSTRACT FROM AUTHOR]

Diffeomorphic registration is a widely used technique for finding a smooth and invertible transformation between two coordinate systems, which are measured using template and reference images. The point-wise volume-preserving constraint det ⁡ (∇ φ (x)) = 1 is effective in some cases, but may be too restrictive in others, especially when local deformations are relatively large. This can result in poor matching when enforcing large local deformations. In this paper, we propose a new bi-variant diffeomorphic image registration model that introduces a soft constraint on the Jacobian equation det ⁡ (∇ φ (x)) = f (x) > 0. This allows local deformations to shrink and grow within a flexible range 0 < κ m < det ⁡ (∇ φ (x)) < κ M. The Jacobian determinant of transformation is explicitly controlled by optimizing the relaxation function f (x). To prevent deformation folding and improve the smoothness of the transformation, a positive constraint is imposed on the optimization of the relaxation function f (x) , and a regularizer is used to ensure the smoothness of f (x). Furthermore, the positivity constraint ensures that f (x) is as close to one as possible, which helps to achieve a volume-preserving transformation on average. We also analyze the existence of the minimizer for the variational model and propose a penalty-splitting algorithm with a multilevel strategy to solve this model. Numerical experiments demonstrate the convergence of the proposed algorithm and show that the positivity constraint can effectively control the range of relative volume without compromising the accuracy of the registration. Moreover, the proposed model generates diffeomorphic maps for large local deformations and outperforms several existing registration models in terms of performance. • A novel bi-variant diffeomorphic image registration model with relaxed Jacobian determinant constraints is proposed. • The existence of the minimizer for the variational model is proved. • A penalty splitting algorithm with a multilevel strategy is designed to solve the new model. • Numerical experiments show that the proposed algorithm is convergent and the new model has good performance. [ABSTRACT FROM AUTHOR]

This paper compares various angle-tracking algorithms to balance the performance and noise for a steering-by-wire (SBW) system. Direct and quiet steering experiences can improve drivers' acceptance of the SBW system. Linear quadratic regulator (LQR) control, robust control, and conventional cascade proportional–integral (PI) control have been developed and compared both theoretically and experimentally. To avoid the risky and time-consuming parameter-tuning process, a high-fidelity steering resistance model, which comprises a linear two-degree-of-freedom vehicle model and a dynamic LuGre friction model is established. Step and sine wave tests are simulated in a Matlab/Simulink environment to determine the reasonable parameter region for various methods. Then, the three types of algorithms are implemented on a prototype SBW vehicle and compared under the same scenarios. Finally, the simulated and experimental results are illustrated in detail. According to the indicators of control bandwidths, steady-state errors, cockpit sounds, and current waveforms, it is clear that LQR and robust control can achieve faster response and more acceptable noise, with uncertain and relatively larger tracking errors. Cascade PI control, in comparison, can realize smaller steady-state errors and gentler current waveforms, with slight noise and slower response. [ABSTRACT FROM AUTHOR]

Optimization of scheduling problems that involve single or multiple machines with a multimodal objective function and linear or non-linear constraints are generally NP-Hard. The Artificial Bee Colony (ABC) algorithm is a metaheuristic proposed about eighteen years ago and has gained popularity in the swarm intelligence-based evolutionary computation approaches. Various scheduling requirements in diverse domains viz. Electric Vehicle charging, Operating Room, Nurse, Automatic Guided Vehicle (AGV), production, manufacturing, hydrothermal, Printed Circuit Board (PCB), and call centre scheduling are studied. The NP-Hard nature of these scheduling problems render exact methods incompetent for large problem instances thus requiring meta-heuristics such as ABC to produce feasible solutions in a reasonable computation time. The adaptation of ABC in these domains and the outcomes and performance of ABC are highlighted. Based on the case studies, it is found that the requirements of scheduling problems that would benefit from ABC are those that have a planning horizon requiring a near-optimal solution in a reasonably fast time when run on minimal computing capacity. Future works that would merit the application and enhancement of existing ABC techniques are proposed. The case studies presented in this paper motivate R&D Engineers and young researchers to apply ABC techniques of optimization and scheduling in different research topics for achieving energy and cost efficiency. [ABSTRACT FROM AUTHOR]

The exponential increase in Internet-facing devices in the last decade has resulted in IP address exhaustion due to the limitations of the existing IPv4 address space. Therefore, the Internet Engineering Task Force engineered a new version of the Internet protocol known as Internet Protocol Version 6 (IPv6) to resolve the issue. However, IPv6 is highly dependent on the neighbor discovery protocol (NDP), which, unfortunately, has well-known vulnerabilities in its underlying messaging protocol, the Internet Control Message Protocol version 6. So, the NDP flaws leave the IPv6 network open to many security threats and attacks, including man-in-the-middle, spoofing, and denial-of-service attacks, which are the most annoying attack at the network layer. Unfortunately, one of the critical issues plaguing the existing anomaly-based detection system is the effectiveness of detecting NDP-based DDoS attacks, which requires urgent attention. This paper suggests a system to find network traffic patterns that are not normal that are caused by NDP-based attacks. It does this by teaching neural networks how to recognize network attack patterns using the backpropagation algorithm. The proposed system is a big step forward from where the field is now because it uses a complex neural network algorithm to create an NDP anomaly-based detection system. Using a real dataset to test the proposed system's performance shows that it can find NDP anomalies with a 99.95% success rate, a 99.92% precision rate, a 99.98% recall rate, an F1-Score of 99.98%, and a 0.040% false positive rate. Also, the proposed approach shows better results compared to other existing approaches. [ABSTRACT FROM AUTHOR]

In this paper, we present an underdetermined estimation algorithm for two-dimensional (2-D) direction of arrival (DOA) based on three-parallel co-prime arrays. By exploiting the correlation among the received signals in both the time and spatial domains, a conjugate augmented spatial–temporal virtual array is constructed, which significantly increases the degrees of freedom (DOF) and expands the array aperture, effectively filling the holes within the physical array. By vectorizing the covariance matrix obtained from the spatial–temporal virtual array, we can transform the 2-D DOA estimation problem into a one-dimensional (1-D) sparse recovery problem. Thereafter, the excellent gridless methods: sparse and parametric approach (SPA) and the matrix pencil and pairing (MAPP), are adopted to efficiently resolve the 1-D sparse recovery problem, enabling the automatic pairing of the 2-D angles. And simulation results are provided to validate the enhanced accuracy of the proposed algorithm in comparison with other existing methods. [ABSTRACT FROM AUTHOR]

This paper introduces a novel algorithm for optimizing the coefficients of the digital filters used in incremental delta-sigma analog-to-digital converters (IDSC). This algorithm is modified from constrained linear least squares (LS) to improve the signal-to-noise-and-distortion ratio (SNDR) of IDSC and minimize the oversampling rate (OSR) of the modulator, which enhances system speed and reduces power consumption. In the case of the same SNDR, the first-order IDSC with the proposed filter can reduce the OSR of the modulator by 50%, at least compared to the IDSC with the conventional filter. The second-order IDSC with the proposed filter can reach a higher SNDR of 106 dB with an OSR of 64. Considering the nonlinearity of the integrator, the SNDR of IDSC with the proposed filter is also 10 dB greater than that of the conventional filters and 3dB greater than that of the IDSC using the near-optimal algorithm filter. The experimental results indicate that the proposed filter possesses an excellent figure of merit of 0.028 pJ / conv . [ABSTRACT FROM AUTHOR]

The controlled autoregressive autoregressive moving average (CARARMA) models are of popularity to describe the evolution characteristics of dynamical systems. To overcome the identification obstacle resulting from colored noises, this paper studies the identification of the CARARMA models by forming an intermediate correlated noise model. In order to realize the real-time prediction function of the models, the on-line identification scheme is developed by constructing the dynamical objective functions based on the real-time sampled observations. Firstly, a rolling optimization cost function is built based on the observation at a single sampling instant to catch the modal information at a single time point and a generalized extended stochastic gradient (GESG) algorithm is proposed through the stochastic gradient optimization. Secondly, a rolling window cost function is built in accordance with the dynamical batch observations within data window by extending the proposed GESG algorithm and the multi-innovation generalized extended stochastic gradient algorithm is derived. Thirdly, from the perspective of theoretical analysis, the convergence proof of the proposed algorithm is provided based on the stochastic martingale convergence theory. Finally, the simulation analysis and comparison studies are provided to show the performance of the proposed algorithms. [ABSTRACT FROM AUTHOR]

This paper presents a new method to efficiently update workpiece and determine cutter-workpiece engagement (CWE) in multi-axis milling simulation based on a uniform voxel modeling space. At each cutter location, a novel algorithm named direct voxel tracing is developed and used to generate a functional cutter surface voxel model to reliably establish the internal space of the milling cutter. The cutter internal space is represented by its voxel boundary with small memory usage. Through the Boolean subtraction between two successive voxel boundaries of the cutter internal space, a minimal voxel deactivation region is attained within which all active workpiece voxels are deactivated (removed) to update the workpiece model. To determine the associated CWE map, a 3D circle voxelization algorithm is employed. By slicing the cutter surface by a sequence of planes perpendicular to and along the cutter axis, CWE can be determined as the sliced 3D circles are voxelized. Quantitative comparisons of the proposed method against existing voxel modeling and vector modeling-based methods have been made. The results have demonstrated much improved computational efficiency of the proposed method in simulating the complex multi-axis milling operations. [ABSTRACT FROM AUTHOR]

In this paper, we devise a stochastic extragradient-like algorithm incorporated with inertial terms, which requires a single projection onto our feasible set and employs a stochastic approximation version of an Armijo-type line search scheme along a feasible direction, for solving pseudomonotone stochastic variational inequalities. In the algorithm, two different stepsize strategies are employed to update steplength sequences without using the prior knowledge of the Lipschitz constant of involved operators. In the process of the stochastic approximation, we iteratively reduce the variance of stochastic errors. The almost sure convergence, the complexity analysis, and rates are provided in a dimensional space under reasonable conditions. Finally, some numerical experiments with graphical illustrations are reported to demonstrate the applicability and the efficiency of our algorithm in comparison with some projection type methods in the literature. [ABSTRACT FROM AUTHOR]

Optimal dispatch in power systems is a complex mathematical model of nonlinear programming with many physical constraints, which is difficult to solve by conventional methods. Thus, intelligent algorithms are now viable options for resolving the nonlinear scheduling issues of microgrids. In this paper, we propose a double-layer optimization strategy based on the multi-point improved gray wolf algorithm (MPIGWO). The inner layer optimizes load profiles with time-of-use tariffs. The outer one achieves a fast search for the optimal solution and prevents getting stuck in a local optimum, which improves the gray wolf algorithm significantly. First, the Bernoulli map is used to randomly generate the initial population. Second, the efficiency of optimization can be improved by modifying the attenuation factor based on the Sin function and then updating the exact weight factor of the position to reasonably select the best position. Finally, an improved dimensional learning-based hunting (IDLH) search strategy is employed to determine the optimal solution. The numerical case study shows that the proposed double-layer optimization strategy can implement dynamic scheduling for distributed power sources while lowering the costs of economic operation and environmental protection significantly. [ABSTRACT FROM AUTHOR]

In this paper we provide a tetrahedra-free algorithm to compute low-cardinality quadrature rules with a given degree of polynomial exactness, positive weights and interior nodes on a polyhedral element with arbitrary shape. The key tools are the notion of Tchakaloff discretization set and the solution of moment-matching equations by Lawson-Hanson iterations for NonNegative Least-Squares. Several numerical tests are presented. The method is implemented in Matlab as open-source software. [ABSTRACT FROM AUTHOR]

Mesh size dependency caused by strain localization is an ongoing problem in numerical simulations using the finite element method. In order to solve this problem, the concept of including the characteristic element length for regularization is used in the literature. The estimation of the characteristic element length is not a straightforward task since normally the characteristic element length differs from one element to another in the simulation and depends not only on element geometry but also on fracture plane orientation and material orientation. In this paper, an innovative method is proposed to estimate the characteristic element length which works on the orthogonal projection of elements on the fracture plane. The method is implemented in Abaqus/Explicit finite element solver and is verified using simple and more complex load cases such as tensile specimens, open hole specimens, and low-velocity impact. A good correlation between the numerical and experimental results in all of the studied cases was achieved and the proposed method proved to be effective in reducing mesh sensitivity. The use of the volumetric method from the literature for the simulation of open-hole tensile specimens led to more than 25% increase in the estimation of specimen strength while similar values of strength for different element aspect ratios were achieved with the proposed method. [ABSTRACT FROM AUTHOR]

Estimating clean seismic signals from noisy single‐channel records is a hot research topic in the field of microseismic data processing. Due to the existence of strong random noise, the signal‐to‐noise ratio of such data is low, presenting a challenge for signal restoration. In this paper, we propose a denoising method of microseismic data based on a single‐channel phase space reconstruction and independent component analysis algorithm. Specifically, we first apply the phase space reconstruction to transform the one‐dimensional seismic signal into a high‐dimensional phase space in which signal and noise have different trajectories. We then employ independent component analysis to the reconstructed data for noise separation. Experimental results on real microseismic data verify that our proposed denoising method is useful for noise suppression and can enhance the signal‐to‐noise ratio of data, which can be further used for signal identification and event positioning in microseismic monitoring. [ABSTRACT FROM AUTHOR]

Background: Malnutrition is associated with increased morbidity, mortality, and healthcare costs. Early detection is important for timely intervention. This paper assesses the ability of a machine learning screening tool (MUST‐Plus) implemented in registered dietitian (RD) workflow to identify malnourished patients early in the hospital stay and to improve the diagnosis and documentation rate of malnutrition. Methods: This retrospective cohort study was conducted in a large, urban health system in New York City comprising six hospitals serving a diverse patient population. The study included all patients aged ≥ 18 years, who were not admitted for COVID‐19 and had a length of stay of ≤ 30 days. Results: Of the 7736 hospitalisations that met the inclusion criteria, 1947 (25.2%) were identified as being malnourished by MUST‐Plus‐assisted RD evaluations. The lag between admission and diagnosis improved with MUST‐Plus implementation. The usability of the tool output by RDs exceeded 90%, showing good acceptance by users. When compared pre‐/post‐implementation, the rate of both diagnoses and documentation of malnutrition showed improvement. Conclusion: MUST‐Plus, a machine learning‐based screening tool, shows great promise as a malnutrition screening tool for hospitalised patients when used in conjunction with adequate RD staffing and training about the tool. It performed well across multiple measures and settings. Other health systems can use their electronic health record data to develop, test and implement similar machine learning‐based processes to improve malnutrition screening and facilitate timely intervention. Key points/Highlights: Malnutrition is prevalent among hospitalised patients and frequently goes unrecognised, with the potential for severe sequelae. Accurate diagnosis, documentation and treatment of malnutrition have the potential of having a positive impact on morbidity rate, mortality rate, length of inpatient stay, readmission rate and hospital revenue. The tool's successful application highlights its potential to optimise malnutrition screening in healthcare systems, offering potential benefits for patient outcomes and hospital finances. [ABSTRACT FROM AUTHOR]

Because of the limitations of current PCB detection methods, such as low detection accuracy and high rate of false and missed detection, a PCB defect detection algorithm based on improved RetinaNet is proposed, that is, RetinaNet-line. Firstly, the algorithm uses PVT v2B2-Hi as the backbone network of the whole model, which can not only solve the deep feature redundancy caused by the residual network in RetinaNet but also improve the feature extraction ability of the network. Then, the CARAFE up-sampling module is used to enrich the semantic features of defective targets and promote the discrimination ability of the algorithm to defective targets. Finally, HSV color space is used to process the input feature image, and the color distribution is expanded by random perturbation in H, S, and V channels, with the data enhancement completed. In this paper, experiments are conducted on the publicly shared PCB defect detection dataset from the Intelligent Open Laboratory of Peking University, and the results show that the improved algorithm achieves 94.2% in the mAP index, which is better than other networks. [ABSTRACT FROM AUTHOR]

In this paper, we introduce a new approach based on the excess components of a frame for recognizing norm retrieval frames (NRFs) in finite‐dimensional Hilbert spaces. This method leads to a complete characterization of NRFs in ℝ2$$ {\mathrm{\mathbb{R}}}&amp;#x0005E;2 $$ and ℝ3$$ {\mathrm{\mathbb{R}}}&amp;#x0005E;3 $$ and then to 1‐excess NRFs in ℝn$$ {\mathrm{\mathbb{R}}}&amp;#x0005E;n $$. This approach is not only more effective in higher dimensions for detecting NRF than the previous approaches but is also applicable to constructing NRF from a given Riesz basis. In addition, we establish a relationship between the norm retrievability of a frame and its duals. We also show that, unlike the phase retrieval property, the set of all norm retrievable dual frames is generally not dense in the set of all dual frames. Then, we present numerical results to illustrate the potentiality of the NRF approach in signal recovery with respect to the classical framework in frame theory, and finally, we raise some perspectives and problems concerning NRF. [ABSTRACT FROM AUTHOR]

The paper considers the design of sparse arrays in the interference active environment to minimise the system complexity and achieve reduced hardware cost. For this, we propose a sparse array design methodology to attain maximum signal-to-interference plus noise ratio (MaxSINR) in the presence of interfering signals. We formulate the optimisation problem as a real-valued quadratically constrained quadratic program (QCQP) with the non-convex $\textstyle\ell_p$ ℓ p norm to promote sparsity, which is iteratively controlled in the proposed approach. We employ the semidefinite relaxation (SDR) technique and the principle of the majorization-minimisation (MM) algorithm to solve the non-convex QCQP problem. The efficacy of the proposed algorithm is demonstrated through the simulation results. The sparse array obtained through the proposed method performs well when compared with the reweighted $\textstyle\ell_1$ ℓ 1 algorithm. [ABSTRACT FROM AUTHOR]

Simon's problem is one of the most important problems demonstrating the power of quantum algorithms, as it greatly inspired the proposal of Shor's algorithm. The generalized Simon's problem is a natural extension of Simon's problem and also a special hidden subgroup problem: Given a function f : { 0 , 1 } n → { 0 , 1 } m , it is promised that there exists a hidden subgroup S ≤ Z 2 n of rank k such that for any x , y ∈ { 0 , 1 } n , f (x) = f (y) iff x ⊕ y ∈ S . The goal of generalized Simon's problem is to find the hidden subgroup S. In this paper, we present two key contributions. Firstly, we characterize the structure of the generalized Simon's problem in distributed scenario and introduce a corresponding distributed quantum algorithm. Secondly, we refine the algorithm to ensure exactness due to the application of quantum amplitude amplification technique. Our algorithm offers exponential speedup compared to the distributed classical algorithm. When contrasted with the quantum algorithm for the generalized Simon's problem, our algorithm's oracle requires fewer qubits, thus making it easier to be physically implemented. Particularly, the exact distributed quantum algorithm we develop for the generalized Simon's problem outperforms the best previously proposed distributed quantum algorithm for Simon's problem in terms of generalizability and exactness. [ABSTRACT FROM AUTHOR]

One of the most popular techniques for changing the purpose of an image or resizing a digital image with content awareness is the seam-carving method. The performance of image resizing algorithms based on seam machining shows that these algorithms are highly dependent on the extraction of importance map techniques and the detection of salient objects. So far, various algorithms have been proposed to extract the importance map. In this paper, a new method based on Rényi entropy is proposed to extract the importance map. Also, a deep learning network has been used to detect salient objects. The simulator results showed that combining Rényi's importance map with a deep network of salient object detection performed better than classical seam-carving and other extended seam-carving algorithms based on deep learning. [ABSTRACT FROM AUTHOR]

March algorithms are widely used in Memory Built-In Self-Test (MBIST) on-chip memory testing, providing linear test complexities that reduce the test time and cost. However, studies show that March algorithms with complexities lower than 18N have poor coverages of faults that have emerged with the advent of the nanometer process technologies and are more relevant to nowadays memories. New March AZ1 and March AZ2 algorithms, with 13N and 14N complexities, respectively, were introduced to provide optimum coverage of those faults and to produce a shorter test than an 18N-complexity test algorithm with a lesser area overhead, thus reducing chip manufacturing costs. This paper presents the implementation and validation of MBIST controllers that applied the March AZ1 and March AZ2 algorithms in a Field-Programmable Gate Array (FPGA) device. They were implemented in the Intel Max 10 DE10-Lite FPGA Development Board. A test generator was built in FPGA, as an alternative to the external tester, to provide test vectors required in initiating the test on the memory model using the implemented MBIST. The FPGA experimental tests demonstrated that they function correctly as the expected test sequences were observed. In addition, their fault detection abilities were also validated through tests on a fault-injected memory model, which shows that the implemented March AZ1 and March AZ2 provide 80.6% and 83.3% coverage of the intended faults, respectively, which outperform any other existing 14N-complexity March algorithms. [ABSTRACT FROM AUTHOR]

This paper investigates the distributed optimization problem of networked Euler–Lagrange (EL) systems with actuator faults and unknown model parameters. In order to solve this issue, some event‐triggered fault‐tolerant (ETFT) optimal coordination algorithms with the mechanism of intermittent communication and intermittent controller update are designed for the first time to compensate for the impact of physical faults on the system, and reduce communication costs and control resource consumption. For practical applications, it is difficult for the system to have a secure environment if there exist malicious attacks blocking network channels among agents. Therefore, the resilient ETFT optimal coordination with intermittent communication subject to asynchronous denial‐of‐service (DoS) attacks is considered. Especially, auxiliary systems with adaptive gains are introduced in the algorithms due to the unavailability of the EL model parameters, which also enable virtual data exchange between agents and protect actual state information. Note that the algorithms are fully distributed as the global topology information is not required. Finally, the feasibility of the proposed algorithms is verified through numerical simulation of examples. [ABSTRACT FROM AUTHOR]

This paper extends our previous method for COVID-19 diagnosis, proposing an enhanced solution for detecting COVID-19 from computed tomography (CT) images using a lean transfer learning-based model. To decrease model misclassifications, two key steps of image processing were employed. Firstly, the uppermost and lowermost slices were removed, preserving sixty percent of each patient's slices. Secondly, all slices underwent manual cropping to emphasize the lung areas. Subsequently, resized CT scans (224 × 224) were input into an Xception transfer learning model with a modified output. Both Xception's architecture and pretrained weights were leveraged in the method. A big and rigorously annotated database of CT images was used to verify the method. The number of patients/subjects in the dataset is more than 5000, and the number and shape of the slices in each CT scan varies greatly. Verification was made both on the validation partition and on the test partition of unseen images. Results on the COV19-CT database showcased not only improvement from our previous solution and the baseline but also comparable performance to the highest-achieving methods on the same dataset. Further validation studies could explore the scalability and adaptability of the developed methodologies across diverse healthcare settings and patient populations. Additionally, investigating the integration of advanced image processing techniques, such as automated region of interest detection and segmentation algorithms, could enhance the efficiency and accuracy of COVID-19 diagnosis. [ABSTRACT FROM AUTHOR]

A colored de Bruijn graph (also called a set of k-mer sets), is a set of k-mers with every k-mer assigned a set of colors. Colored de Bruijn graphs are used in a variety of applications, including variant calling, genome assembly, and database search. However, their size has posed a scalability challenge to algorithm developers and users. There have been numerous indexing data structures proposed that allow to store the graph compactly while supporting fast query operations. However, disk compression algorithms, which do not need to support queries on the compressed data and can thus be more space-efficient, have received little attention. The dearth of specialized compression tools has been a detriment to tool developers, tool users, and reproducibility efforts. In this paper, we develop a new tool that compresses colored de Bruijn graphs to disk, building on previous ideas for compression of k-mer sets and indexing colored de Bruijn graphs. We test our tool, called ESS-color, on various datasets, including both sequencing data and whole genomes. ESS-color achieves better compression than all evaluated tools and all datasets, with no other tool able to consistently achieve less than 44% space overhead. The software is available at http://github.com/medvedevgroup/ESSColor. [ABSTRACT FROM AUTHOR]

In this paper, we develop the theoretical provisions of symmetric cryptographic algorithms based on the polynomial residue number system for the first time. The main feature of the proposed approach is that when reconstructing the polynomial based on the method of undetermined coefficients, multiplication is performed not on the found base numbers but on arbitrarily selected polynomials. The latter, together with pairwise coprime residues of the residue class system, serve as the keys of the cryptographic algorithm. Schemes and examples of the implementation of the developed polynomial symmetric encryption algorithm are presented. The analytical expressions of the cryptographic strength estimation are constructed, and their graphical dependence on the number of modules and polynomial powers is presented. Our studies show that the cryptanalysis of the proposed algorithm requires combinatorial complexity, which leads to an NP-complete problem. [ABSTRACT FROM AUTHOR]

Remote sensing image fusion is dedicated to obtain a high-resolution multispectral (HRMS) image without spatial or spectral distortion compared to the single source image. In this paper, a novel fusion algorithm based on Bayesian estimation for remote sensing images is proposed from the new perspective of risk decisions. In this study, an observation model based on Bayesian estimation for remote sensing image fusion is constructed. Three categories of probabilities including prior, conditional and posterior probabilities are calculated after an intensity-hue-saturation (IHS) transformation is applied to the original low-resolution MS image. To obtain the desired HRMS image, with the corrected posterior probability, a fusion rule based on Bayesian decisions is designed to estimate which pixels to select from the panchromatic (PAN) image and the intensity component of the MS image. The selected pixels constitute a new component that will participate in an IHS inverse transformation to yield the fused image. Extensive experiments were performed on the Pleiades, WorldView-3, and IKONOS datasets, and the results demonstrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

The identification research of hydrogenation catalyst information has always been one of the most important businesses in the chemical industry. In order to aid researchers in efficiently screening high-performance catalyst carriers and tackle the pressing challenge at hand, it is imperative to find a solution for the intelligent recognition of hydrogenation catalyst images. To address the issue of low recognition accuracy caused by adhesion and stacking of hydrogenation catalysts, An image recognition algorithm of hydrogenation catalyst based on FPNC Net was proposed in this paper. In the present study, Resnet50 backbone network was used to extract the features, and spatially-separable convolution kernel was used to extract the multi-scale features of catalyst fringe. In addition, to effectively segment the adhesive regions of stripes, FPN (Feature Pyramid Network) is added to the backbone network for deep and shallow feature fusion. Introducing an attention module to adaptively adjust weights can effectively highlight the target features of the catalyst. The experimental results showed that the FPNC Net model achieved an accuracy of 94.2% and an AP value improvement of 19.37% compared to the original CenterNet model. The improved model demonstrates a significant enhancement in detection accuracy, indicating a high capability for detecting hydrogenation catalyst targets [ABSTRACT FROM AUTHOR]

As the terminal of the power system, the distribution network is the main area where failures occur. In addition, with the integration of distributed generation, the traditional distribution network becomes more complex, rendering the conventional fault location algorithms based on a single power supply obsolete. Therefore, it is necessary to seek a new algorithm to locate the fault of the distributed power distribution network. In existing fault localization algorithms for distribution networks, since there are only two states of line faults, which can usually be represented by 0 and 1, most algorithms use discrete algorithms with this characteristic for iterative optimization. Therefore, this paper combines the advantages of the particle swarm algorithm and genetic algorithm and uses continuous real numbers for iteration to construct a successive particle swarm genetic algorithm (SPSO-GA) different from previous algorithms. The accuracy, speed, and fault tolerance of SPSO-GA, discrete particle swarm Genetic algorithm, and artificial fish swarm algorithm are compared in an IEEE33-node distribution network with the distributed power supply. The simulation results show that the SPSO-GA algorithm has high optimization accuracy and stability for single, double, or triple faults. Furthermore, SPSO-GA has a rapid convergence velocity, requires fewer particles, and can locate the fault segment accurately for the distribution network containing distorted information. [ABSTRACT FROM AUTHOR]

In this paper, we propose a sparse least squares (SLS) optimization model for solving multilinear equations, in which the sparsity constraint on the solutions can effectively reduce storage and computation costs. By employing variational properties of the sparsity set, along with differentiation properties of the objective function in the SLS model, the first-order optimality conditions are analysed in terms of the stationary points. Based on the equivalent characterization of the stationary points, we propose the Newton Hard-Threshold Pursuit (NHTP) algorithm and establish its locally quadratic convergence under some regularity conditions. Numerical experiments conducted on simulated datasets including cases of Completely Positive(CP)-tensors and symmetric strong M-tensors illustrate the efficiency of our proposed NHTP method. [ABSTRACT FROM AUTHOR]

The field of network security is highly concerned with intrusion detection, which safeguards the security of computer networks. The invention and application of intrusion detection technology play indispensable roles in network security, and it is crucial to investigate and comprehend this topic. Recently, with the continuous occurrence of intrusion incidents in virus propagation networks, traditional network detection algorithms for virus propagation have encountered limitations and have struggled to detect these incidents effectively and accurately. Therefore, updating the intrusion detection algorithm of the virus-spreading network is imperative. This paper introduces a novel system for virus propagation, whose core is a graph-based neural network. By organically combining two modules—a standardization module and a computation module—this system forms a powerful GNN model. The standardization module uses two methods, while the calculation module uses three methods. Through permutation and combination, we obtain six GNN models with different characteristics. To verify their performance, we conducted experiments on the selected datasets. The experimental results show that the proposed algorithm has excellent capabilities, high accuracy, reasonable complexity, and excellent stability in the intrusion detection of virus-spreading networks, making the network more secure and reliable. [ABSTRACT FROM AUTHOR]

Community structure is a very interesting attribute and feature in complex networks, which has attracted scholars' attention and research on community detection. Many single-objective optimization algorithms have been migrated and modified to serve community detection problems. Due to the limitation of resolution, the final algorithm implementation effect is not ideal. In this paper, a multi-objective community detection method based on a pigeon-inspired optimization algorithm, MOPIO-Net, is proposed. Firstly, the PIO algorithm is discretized in terms of the solution space representation, position, and velocity-updating strategies to adapt to discrete community detection scenarios. Secondly, by minimizing the two objective functions of community score and community fitness at the same time, the community structure with a tight interior and sparse exterior is obtained. Finally, for the misclassification caused by boundary nodes, a mutation strategy is added to improve the accuracy of the final community recognition. Experiments on synthetic and real networks verify that the proposed algorithm is more accurate in community recognition compared to 11 benchmark algorithms, confirming the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

A k -class domination coloring (k -cd-coloring) is a partition of the vertex set of a graph G into k independent sets V 1 , ... , V k , where each V i is dominated by some vertex u i of G. The least integer k such that G admits a k -cd-coloring is called the cd-chromatic number, χ c d (G) , of G. A subset S of the vertex set of a graph G is called a subclique in G if d G (x , y) ≠ 2 for every x , y ∈ S. The cardinality of a maximum subclique in G is called the subclique number, ω s (G) , of G. In this paper, we present algorithms to compute an optimal cd-coloring and a maximum subclique of (i) trees with time complexity O (n) and (ii) co-bipartite graphs with time complexity O (n 2. 5). This improves O (n 3) algorithms by Shalu et al. (2017, 2020). In addition, we prove tight upper bounds for the subclique number of the class of (i) P 5 -free graphs and (ii) double-split graphs. [ABSTRACT FROM AUTHOR]

Object detection is one of the core technologies for autonomous driving. Current road object detection mainly relies on visible light, which is prone to missed detections and false alarms in rainy, night-time, and foggy scenes. Multispectral object detection based on the fusion of RGB and infrared images can effectively address the challenges of complex and changing road scenes, improving the detection performance of current algorithms in complex scenarios. However, previous multispectral detection algorithms suffer from issues such as poor fusion of dual-mode information, poor detection performance for multi-scale objects, and inadequate utilization of semantic information. To address these challenges and enhance the detection performance in complex road scenes, this paper proposes a novel multispectral object detection algorithm called MRD-YOLO. In MRD-YOLO, we utilize interaction-based feature extraction to effectively fuse information and introduce the BIC-Fusion module with attention guidance to fuse different modal information. We also incorporate the SAConv module to improve the model's detection performance for multi-scale objects and utilize the AIFI structure to enhance the utilization of semantic information. Finally, we conduct experiments on two major public datasets, FLIR_Aligned and M3FD. The experimental results demonstrate that compared to other algorithms, the proposed algorithm achieves superior detection performance in complex road scenes. [ABSTRACT FROM AUTHOR]

With the rapid development of the intelligent driving technology, achieving accurate path planning for unmanned vehicles has become increasingly crucial. However, path planning algorithms face challenges when dealing with complex and ever-changing road conditions. In this paper, aiming at improving the accuracy and robustness of the generated path, a global programming algorithm based on optimization is proposed, while maintaining the efficiency of the traditional A* algorithm. Firstly, turning penalty function and obstacle raster coefficient are integrated into the search cost function to increase the adaptability and directionality of the search path to the map. Secondly, an efficient search strategy is proposed to solve the problem that trajectories will pass through sparse obstacles while reducing spatial complexity. Thirdly, a redundant node elimination strategy based on discrete smoothing optimization effectively reduces the total length of control points and paths, and greatly reduces the difficulty of subsequent trajectory optimization. Finally, the simulation results, based on real map rasterization, highlight the advanced performance of the path planning and the comparison among the baselines and the proposed strategy showcases that the optimized A* algorithm significantly enhances the security and rationality of the planned path. Notably, it reduces the number of traversed nodes by 84%, the total turning angle by 39%, and shortens the overall path length to a certain extent. [ABSTRACT FROM AUTHOR]

Underwater mobile acoustic source target localization encounters several challenges, including the unknown propagation speed of the source signal, uncertainty in the observation platform's position and velocity (i.e., platform systematic errors), and economic costs. This paper proposes a new two-step closed-form localization algorithm that jointly estimates the angle of arrival (AOA), time difference of arrival (TDOA), and frequency difference of arrival (FDOA) to address these challenges. The algorithm initially introduces auxiliary variables to construct pseudo-linear equations to obtain the initial solution. It then exploits the relationship between the unknown and auxiliary variables to derive the exact solution comprising solely the unknown variables. Both theoretical analyses and simulation experiments demonstrate that the proposed method accurately estimates the position, velocity, and speed of the sound source even with an unknown sound speed and platform systematic errors. It achieves asymptotic optimality within a reasonable error range to approach the Cramér–Rao lower bound (CRLB). Furthermore, the algorithm exhibits low complexity, reduces the number of required localization platforms, and decreases the economic costs. Additionally, the simulation experiments validate the effectiveness of the proposed localization method across various scenarios, outperforming other comparative algorithms. [ABSTRACT FROM AUTHOR]

Unmanned Aerial Vehicle (UAV) infrared detection has problems such as weak and small targets, complex backgrounds, and poor real-time detection performance. It is difficult for general target detection algorithms to achieve the requirements of a high detection rate, low missed detection rate, and high real-time performance. In order to solve these problems, this paper proposes an improved small target detection method based on Picodet. First, to address the problem of poor real-time performance, an improved lightweight LCNet network was introduced as the backbone network for feature extraction. Secondly, in order to solve the problems of high false detection rate and missed detection rate due to weak targets, the Squeeze-and-Excitation module was added and the feature pyramid structure was improved. Experimental results obtained on the HIT-UAV public dataset show that the improved detection model's real-time frame rate increased by 31 fps and the average accuracy (MAP) increased by 7%, which proves the effectiveness of this method for UAV infrared small target detection. [ABSTRACT FROM AUTHOR]

Autonomous mobile robots are essential to the industry, and human–robot interactions are becoming more common nowadays. These interactions require that the robots navigate scenarios with static and dynamic obstacles in a safely manner, avoiding collisions. This paper presents a physical implementation of a method for dynamic obstacle avoidance using a long short-term memory (LSTM) neural network that obtains information from the mobile robot's LiDAR for it to be capable of navigating through scenarios with static and dynamic obstacles while avoiding collisions and reaching its goal. The model is implemented using a TurtleBot3 mobile robot within an OptiTrack motion capture (MoCap) system for obtaining its position at any given time. The user operates the robot through these scenarios, recording its LiDAR readings, target point, position inside the MoCap system, and its linear and angular velocities, all of which serve as the input for the LSTM network. The model is trained on data from multiple user-operated trajectories across five different scenarios, outputting the linear and angular velocities for the mobile robot. Physical experiments prove that the model is successful in allowing the mobile robot to reach the target point in each scenario while avoiding the dynamic obstacle, with a validation accuracy of 98.02%. [ABSTRACT FROM AUTHOR]

Ferroresonance in power networks is a dangerous phenomenon, which may result in overcurrents and overvoltages, causing damage to power equipment and the faulty operation of protection systems. For this reason, the possibility of the occurrence of ferroresonance has to be identified, and adequate methods need to be incorporated to eliminate or reduce its effects. The aim of this paper is to evaluate the effectiveness of ferroresonance damping in auxiliary power systems of high-voltage substations by selected damping devices. Laboratory experiments, the results of which created bases for the development of models of selected damping devices, are presented. These models were used to simulate the effectiveness of ferroresonance damping in an auxiliary power system of a 220/110 kV substation in the EMTP-ATP program. The analyses showed that control systems with different algorithms of operation are used in damping devices. This knowledge is important when selecting parameters and settings of the applied damping devices for a given network and the disturbances in it. The presented research results have proved the effectiveness of commercially available damping devices, provided their parameters are correctly coordinated with the settings of the power system protection. [ABSTRACT FROM AUTHOR]

With the advancement of remote sensing technology, the demand for the accurate monitoring and tracking of various targets utilizing unmanned aerial vehicles (UAVs) is increasing. However, challenges such as object deformation, motion blur, and object occlusion during the tracking process could significantly affect tracking performance and ultimately lead to tracking drift. To address this issue, this paper introduces a high-precision target-tracking method with anomaly tracking status detection and recovery. An adaptive feature fusion strategy is proposed to improve the adaptability of the traditional sum of template and pixel-wise learners (Staple) algorithm to changes in target appearance and environmental conditions. Additionally, the Moth Flame Optimization (MFO) algorithm, known for its strong global search capability, is introduced as a re-detection algorithm in case of tracking failure. Furthermore, a trajectory-guided Gaussian initialization technique and an iteration speed update strategy are proposed based on sexual pheromone density to enhance the tracking performance of the introduced re-detection algorithm. Comparative experiments conducted on UAV123 and UAVDT datasets demonstrate the excellent stability and robustness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Mathematical algorithms relate satellite data of ocean color with the surface Chlorophyll-a concentration (Chl-a), a proxy of phytoplankton biomass. These mathematical tools work best when they are adapted to the unique bio-optical properties of a particular oceanic province. Ocean color algorithms should also consider that there are significant differences between datasets derived from different sensors. Common solutions are to provide different parameters for each sensor or use merged satellite data. In this paper, we use satellite data from the Copernicus merged product suite and in situ data from the southernmost part of the California Current System to test two widely used global algorithms, OCx and CI, and a regional algorithm, CalCOFI2. The OCx algorithm yielded the most favorable results. Consequently, we regionalized it and conducted further testing, leading to significant improvements, especially in eutrophic and oligotrophic waters. The database was then separated according to (a) dynamic boundaries in the area, (b) bio-optical properties, and (c) climatic conditions (El Niño/La Niña). Regional algorithms were obtained and tested for each partition. The Chl-a retrievals for each model were tested and compared. The best fit for the data was for the regional algorithms that considered the climatic conditions (El Niño/La Niña). These results will allow for the construction of consistent regionally adapted time series and, therefore, will demonstrate the importance of El Niño/La Niña events on the bio-optical properties of the area. [ABSTRACT FROM AUTHOR]

For airborne radar, detecting a low–slow–small (LSS) target is a hot and challenging topic, which results from the rapidly increasing number of non-cooperative flying LSS targets becoming of widespread concern, and the low signal-to-clutter ratio (SCR) of LSS targets results in the targets being particularly easily overwhelmed by the clutter. In this paper, a novel light gradient boosting machine (LightGBM)-based LSS target detection algorithm for airborne radar is proposed. The proposed method, based on the current real-time clutter environment of the range cell to be detected, firstly designs a specific real-time space-time LSS target signal repository with special dimensions and structures. Then, the proposed method creatively designs a new fast-built real-time training feature dataset specifically for the LSS target and the current clutter, together with a series of unique data transformations, sample selection, data restructuring, feature extraction, and feature processing. Finally, the proposed method develops a unique machine learning-based LSS target detection classifier model for the designed training dataset, by fully excavating and utilizing the advantages of the ensemble decision trees-based LightGBM. Consequently, the pre-processed data in the range cell of interest are classified using the proposed algorithm, which achieves LSS target detection by evaluating the output results of the designed classifier. Compared with the traditional classical target detection methods, the proposed algorithm is capable of providing markedly superior performance for LSS target detection. With an appropriate computational time, the proposed algorithm attains the highest probability of detecting LSS targets under the low SCR. The simulation outcomes and detection results with the experimental data are employed to validate the effectiveness and merits of the proposed algorithm. [ABSTRACT FROM AUTHOR]