Search

Superhydrophobic surfaces are used in fields such as self-cleaning, anti-corrosion and anti-rust, and electromagnetic shielding because they are not wetted by water droplets. We manipulated the scanning spacing and scanning times of the femtosecond laser to control the surface morphology of alumina ceramics, resulting in the creation of two microstructures: micropillars and microhills. Subsequent heat treatment in an oven at 100 °C for 12 h formed a superhydrophobic surface without additional chemical modification, with a contact angle as high as 171.706°. Experimental results show that the superhydrophobicity of the alumina ceramic surface is due to the micro-nano structure of the ceramic surface under specific laser parameters and the hydroxylation of the alumina ceramic itself combined with organic compounds in the air. In addition, the ceramic still has excellent superhydrophobic properties up to 155° after being left in the air for 35 days and abraded by 800-grit sandpaper for 1 m under a pressure of 2.2kpa. Our work uses a new environmentally friendly method to make alumina ceramic surfaces both wear-resistant and superhydrophobic. [ABSTRACT FROM AUTHOR]

The application of high-power laser-driven lighting is limited by the insufficient heat dissipation of phosphor converters and the poor color quality of white light. In this study, the Al 2 O 3 (Gd,Ce) 3 (Al,Ga) 5 O 12 (Al 2 O 3 GAGG:Ce) composite ceramics were designed to improve thermal performance of phosphors, while maintaining excellent color rendering under high-power laser excitation. Dense composite ceramics were fabricated by pre-sintering at 1600 °C in air followed by HIP at 1700 °C through the investigation of the phase evolution and sintering process. The emission spectrum of GAGG:Ce shows a red shift of 31 nm and a high full width at half maximum (FWHM) of 128 nm. Meanwhile, the thermal conductivity was increased to 13.2 W·m−1K−1 by addition of Al 2 O 3 , which is 72% higher than that of single-phase GAGG:Ce ceramic. Therefore, warm white light with high color rendering index (CRI) of 71.4 and low correlated color temperature (CCT) of 4352 K was attained under excitation of high-power LDs. [ABSTRACT FROM AUTHOR]