Search

Highly transparent Lu2O3 ceramics were prepared by using co‐precipitation combined with vacuum sintering method with ZrO2 as sintering aid. The effect of ZrO2 on densification, transmittance, and microstructure evolution of the Lu2O3 ceramics was carefully studied. It was found that the addition of ZrO2 was very effective in improving densification of Lu2O3. The highest transmittance (at 600 nm) of the 3 at.% ZrO2 doped Lu2O3 ceramic (1.6‐mm thickness) sintered at 1800°C reached 80.1%. Microstructural inhomogeneity was found after vacuum sintering with larger grain sizes at the central. The microstructural inhomogeneity mainly occurred in the final stage of sintering. Doping ZrO2 mitigated microstructural inhomogeneity and decreased markedly the grain size of Lu2O3 ceramics. Raman measurements indicated that the disordered structure was formed due to oxygen vacancy, and the oxygen vacancy concentration at the central was higher than at the peripheral. The oxygen vacancy concentration gradient is the dominant factor governing nonuniform microstructure evolution during vacuum sintering. Furthermore, a uniform microstructure was obtained by the inhibition of oxygen vacancy formation by the Lu2O3/ZrO2 double powder bed. [ABSTRACT FROM AUTHOR]

By pre-treating and component design of the ceramic powders, cubic (Lu,Gd) 2 O 3 :Eu solid-solution ceramics with high optical quality were achieved by the solid-state reaction method combined with vacuum sintering. The effects of Gd3+ doping (x = 0.05–0.6) on powder characteristics, phase compositions, microstructures and optical performances of the (Lu 0.95- x Gd x Eu 0.05) 2 O 3 ceramics were systematically investigated to obtain the optimum Gd3+ content. The results indicated that the incorporation of moderate amounts of Gd3+ (5–50 mol%) effectively promoted mass diffusion and grain growth during sintering. The 50 mol% Gd3+-doped Lu 2 O 3 :Eu transparent ceramic (using the powder calcined at 1200 °C) sintered at 1750 °C for 5 h exhibited the optimum transmittance of 77.0 % in the visible spectral region (∼1 mm in thickness), which was significantly higher than the reported transmittance of vacuum sintered (Lu,Gd) 2 O 3 :Eu ceramics (less than 65.0 %). Owing to the lower electronegativity of Gd3+ relative to Lu3+, the bandgap energies of the final ceramics decreased gradually with increasing Gd3+ substitution, and the redshift of the CTB centre was observed with more Gd3+ addition. Under CTB excitation, the incorporation of Gd3+ enhanced the red emission intensity and shortened the fluorescence lifetime. • Highly transparent (Lu,Gd) 2 O 3 :Eu ceramics were achieved by pre-treating and component design of ceramic powders. • Gd3+ doping promotes mass diffusion and grain growth during sintering. • The (Lu 0.45 Gd 0.5 Eu 0.05) 2 O 3 ceramic exhibits the transmittance of 77.0 % in the visible range. • Incorporation of Gd3+ results in enhanced luminescence intensity and shortened lifetime. [ABSTRACT FROM AUTHOR]