Search

There is a need to design a hardware synapse array appropriate for enhancing the efficiency of neuromorphic computing systems while minimizing energy consumption. This study introduces a memristor device with an AlOx overshoot suppression layer (A‐OSL) to achieve a self‐compliance effect. By optimizing each cell within the 16 × 16 crossbar array, synaptic devices are successfully fabricated with reliable characteristics and 3‐bit multilevel capabilities. In addition, the oxygen composition of TiOx and the annealing conditions are optimized to reduce the forming voltage and minimize the variation in the switching voltage. As a result, stable forming‐free characteristics are obtained through A‐OSL insertion, a reduction in forming voltage, and TiOx oxygen composition optimization. Also, target weights are accurately transferred to the A‐OSL memristor crossbar array and conducted the inference process by applying spike signals to the array following the designated time step. The spiking neural network (SNN) is demonstrated by measuring vector‐matrix multiplication (VMM) of the 16 × 16 crossbar array. The VMM results exhibit a classification accuracy of 90.80% for the MNIST dataset, which is close to the accuracy achieved by software‐based approaches, amounting to 91.85%. [ABSTRACT FROM AUTHOR]

In this study, the "resting-potential-adjustable soft-reset (RSR)" integrate-and-fire neuron model is proposed for higher reliability of hardware-based spiking neural networks (SNNs). Recently, researchers have attempted to implement neuronal models using hardware. However, previously proposed hard-reset (HR) and soft-reset (SR) neuron models are not suitable for hardware implementation for the following reasons. First, it is difficult to compensate for the neuron-threshold variation, which generally occurs in the fabrication processes. Second, they require a negative voltage supply that consumes substantial energy to implement the negative membrane potential (NMP). Third, for the HR and SR neuron models, maintaining the residual membrane potential (RMP) is challenging. The proposed RSR neuron model solves these challenges without any additional systems and algorithms and provides the following advantages: easy compensation for the neuron-threshold variation, significant energy reduction without using a negative voltage supply for the NMP, and precise preservation of the RMP. We discuss the behavior of the RSR neuron model and evaluate performance by comparing the inference results. Even with the neuron-threshold variation within the six-sigma range, the RSR neuron model restores the inference accuracy to the values of artificial neural networks (ANNs) for various datasets (CIFAR-10: 92.74%, SVHN: 95.00%, MNIST: 98.30%). In the case of the CIFAR-10, the RSR neuron model consumes 32.80% lower energy than the SR neuron model. [Display omitted] [ABSTRACT FROM AUTHOR]

This study implements a highly uniform 3D vertically stack resistive random‐access memory (VRRAM) with a four‐layer contact hole structure. The fabrication process of a four‐layer VRRAM is demonstrated, and its physical and electrical properties are thoroughly examined. X‐ray photoelectron spectroscopy and transmission electron microscopy are employed to analyze the chemical distribution and physical structure of the VRRAM device. Multilevel capability, reliable endurance (>104 cycles), and retention (104 s) are successfully obtained. Synaptic memory plasticity, such as spike time‐dependent plasticity, spike rate‐dependent plasticity, excitatory post‐synaptic current, paired‐pulse facilitation, and long‐term potentiation and depression is presented. Finally, the vector‐matrix multiplication (VMM) operation is conducted on a 4 × 12 VRRAM array, according to the low resistance state ratio. It is ascertained that the accuracy drop, which can occur due to VMM error, can be limited to a decrease of less than 0.44% point. Utilizing the high‐density, multilevel, and biological characteristics of VRRAM, it is possible to implement high‐performance neuromorphic systems that require densely integrated synaptic devices. [ABSTRACT FROM AUTHOR]

In this study, oxygen‐rich TiOy and TiOx layers are intentionally designed to have different oxygen compositions, functioning as an overshoot suppression layer (OSL) and oxygen reservoirs. Furthermore, by natural oxidation reactions occurring between the TiOy/TiOx/Al2O3 switching layer and the Pt/Al top electrode, an additional AlOy layer can be induced to act as an additional OSL. The proposed annealing process accelerates the oxidation reaction of AlOy/TiOy OSLs, thereby enhancing the self‐compliance feature of devices. Moreover, the ultrathin AlN serves as an oxygen barrier layer (OBL) that inhibits the movement of oxygen ions at the interface between the Al2O3 layer and the Pt/Ti bottom electrode. The optimized devices are tested by DC sweep and pulses for neuromorphic computing systems. To realize biological synapse characteristics, several key synaptic memory plasticities are proposed. Finally, a 24 × 24 crossbar array based on the 0T‐1R structure, incorporating optimized AlOy/TiOy OSLs and OBL via the annealing process, is characterized. During the electroforming step, all specified target cells (marked with the letters “ESDL”) achieved self‐compliance at low current levels without experiencing hard‐breakdown failures or interference among neighboring cells. The successful array performance is demonstrated by the accurate tuning of target weights. [ABSTRACT FROM AUTHOR]