Search

This study aims to evaluate the therapeutic potential of cationic liposomal neostigmine bromide (NB), a novel drug delivery system, for the treatment of detrusor underactivity. By comparing the characteristics of NB‐liposomes (NLP), NB‐β‐cyclodextrin inclusion complex liposomes (NCLP), and NB‐mesoporous silica nanoparticle@CaCO3 liposomes (NMCLP), NMCLP is selected as the main research subject. It has an average particle size and zeta potential of 100 nm and +50 mV, and its encapsulation efficiency and loading capacity of NB are 14.75% and 12.8%, respectively. Most importantly, NMCLP shows the best in vitro release performance among the three liposomes, demonstrating its ability in sustained release of NB. During cell and animal assays, efficient cellular uptake of liposomes through liposome‐specific pathways is observed, facilitating targeted drug delivery, and in vivo experiments demonstrate the efficacy of NMCLP in improving bladder function in mice. Urodynamic measurements show increased bladder capacity and reduced voiding pressure, indicating enhanced bladder muscle activity. Histological analysis reveals the distribution and deep penetration of NMCLP within bladder tissues, supporting its localized drug effect. Therefore, NMCLP holds promise as a targeted and effective therapeutic strategy for detrusor underactivity. [ABSTRACT FROM AUTHOR]

Reprograming of chromatin structures and changes in gene expression are critical for plant male gamete development, and epigenetic marks play an important role in these processes. Histone variant H3.3 is abundant in euchromatin and is largely associated with transcriptional activation. The precise function of H3.3 in gamete development remains unclear in plants. Here, we report that H3.3 is abundantly expressed in Arabidopsis anthers and its knockout mutant h3.3–1 is sterile due to male sterility. Transcriptome analysis of young inflorescence has identified 2348 genes downregulated in h3.3–1 mutant, among which 1087 target genes are directly bound by H3.3, especially at their 3ʹ ends. As a group, this set of H3.3 targets is enriched in the reproduction-associated processes including male gamete generation, pollen sperm cell differentiation and pollen tube growth. The function of H3.3 in male gamete development is dependent on the Anti-Silencing Factor 1A/1B (ASF1A/1B)-Histone regulator A (HIRA)-mediated pathway. Our results suggest that ASF1A/1B-HIRA-mediated H3.3 deposition at its direct targets for transcription activation forms the regulatory networks responsible for male gamete development. [ABSTRACT FROM AUTHOR]

A comprehensive investigation was conducted to explore the adsorption behaviors of CH 4 over N 2 on ultra-microporous Al/Zr-FDCA frameworks, which were synthesized specifically using the eco-friendly and bio-sourced 2,5-furandicarboxylic acid (FDCA). Characterization results revealed that both Al-FDCA and Zr-FDCA exhibited similar specific surface area and surface groups, leading to comparable methane uptake per-unit mass at atmospheric pressure. However, the presence of Zr nodes generated ultra-micropores around 0.43 nm in size, leading to a pronounced affinity for CH 4. Zr-FDCA demonstrated a higher CH 4 /N 2 selectivity (8.90) calculated from the isotherms compared to Al-FDCA (3.86). Furthermore, breakthrough experiments indicated that under the same dynamic conditions, Zr-FDCA exhibited 1.5 times higher CH 4 uptake per unit volume and 2.5 times higher CH 4 /N 2 selectivity when compared to Al-FDCA. Initially, a four-step VPSA process was simulated to investigate the separation of CH 4 /N 2 mixture, in which the effects of feed-gas flow rate, adsorption time, adsorption pressure, and desorption pressure in VPSA cycle were extensively evaluated to enhance the purity and recovery of methane. Subsequently, a six-step process was employed for further optimization, achieving a purity of 95.9 % and a recovery of 99.1 %. The obtained results demonstrated the reliability of the established model and highlighted the significant potential of Zr-FDCA for CH 4 /N 2 separation. [Display omitted] • Ultra-microporous Al/Zr-FDCA MOFs with bio-sourced ligand synthesized for nature gas upgrading. • Zr-FDCA exhibits an excellent CH 4 /N 2 selectivity of 9.0, as 2.3 times as that of Al-FDCA at 298 K and 1 bar. • Dynamic CH 4 uptake and selectivity of per unit volume Zr-FDCA are 1.5 and 2.5 times as those of Al-FDCA. • Zr nodes had a significant impact on the pore size distribution and adsorption strength with methane. • CH 4 recovery and purity of the optimized six-step VPSA cycle reach 95.9 % and 99.1 % for Zr-FDCA. [ABSTRACT FROM AUTHOR]

• A comprehensive stiffness model of intermediate bearing is presented. • A reduced model of dual rotor-bearing-casing coupling system is developed. • The effects of typical parameters on the vibration of the system are discussed. • The mechanism of the comprehensive stiffness and system vibration is revealed. This paper focuses on the vibrational properties of a dual rotor-casing coupled system with nonlinear clearance in the intermediate bearing, considering both the oil film stiffness and Hertzian contact stiffness between rolling elements and raceways. A comprehensive stiffness model for the intermediate bearing has been developed based on elastohydrodynamic lubrication (EHL) and Hertz contact theory. Subsequently, a dynamical model of the dual rotor-bearing-casing system is established using the finite element method, thereby verifying the feasibility of simulating the casing with beam elements. The dimensionality of the system equation is reduced using the fixed-interface component mode synthesis (CMS) method, and the resulting reduced-dimensionality equation is solved using the improved Newmark- β method. The effects of casing support, rotational speed, and radial clearance on the vibration characteristics of the system are investigated. Then, the comprehensive stiffness and coupled vibration characteristics of the system are analyzed to elucidate its intrinsic mechanism. Finally, the contact characteristics within the intermediate bearing under dynamic load are also studied. The results indicate that the support stiffness of the casing has a more significant impact on the second resonance caused by both the inner and outer rotors. The system is prone to experiencing varying compliance (VC) resonance at low rotational speeds. The excessive bearing clearance leads to complex vibrational characteristics of the system, making it challenging to predict its motion. The impact of minor changes in stiffness on system vibration is small when the comprehensive stiffness is large. At this time, the limited effect of oil film stiffness allows it to be disregarded in terms of comprehensive stiffness. Furthermore, the speed significantly influences the contact characteristics within the intermediate bearing under the unbalanced force of the rotor and gravity. [ABSTRACT FROM AUTHOR]

• Increasing the bluff-body temperature by 200 K can extend the lean blowoff (LBO) limit by up to 6.5 %. • The higher bluff-body temperature has limited effects on the velocity field. However, the flame brush thickness, the flame wrinkling ratio, and turbulent flame speed will be changed, leading to a more stable flame. • Based on the probability density functions (PDFs) of the vorticity and strain rate on the flame front, the flame front in the case of higher bluff-body temperature can survive with larger flame strain rates, and the occurrence of the local extinctions can be reduced. In flames stabilized by a two-dimensional (2D) bluff body, the lean blowoff (LBO) limit can be extended by increasing the bluff-body temperature, which is verified experimentally in premixed dimethyl ether (DME)/air flames in this work. Two bluff-body temperatures of 573 K and 773 K are tested, respectively. High-speed OH* chemiluminescence (CL) imaging is applied to record the spatial distribution of the heat release. Particle image velocimetry (PIV) and OH planar laser-induced fluorescence (PLIF) are performed simultaneously to explore the flow field and the combustion characteristics. Based on the results of OH*-CL, the heat release of the area near the bluff body is strengthened in the case of higher bluff-body temperature, and the enhanced chemical reactivity will further influence the downstream area. The turbulent flame speed obtained by OH-PLIF is increased in the entire area of interest. Due to the higher velocity gradient adjacent to the bluff body in the upstream region (y < 35 mm), the flame surface density (FSD), brush thickness, and flame wrinkling ratio are not sensitive to the bluff-body temperature. However, in the downstream region (y > 35 mm), a noticeable change can be found in these three parameters due to a higher turbulent flame speed and a much lower velocity gradient. Based on the PIV results, a limited effect on the velocity field by increasing the bluff-body temperature by 200 K. Furthermore, the probability density functions (PDF) of the vorticity and strain rate on the flame front are computed. The results indicate that the enhanced flame stability leads to a more pronounced overlapping between the flame front and the high-vorticity region, further increasing the values of these two parameters. [ABSTRACT FROM AUTHOR]

Effective separation of inert gas such as Xe and Kr from used nuclear fuel is significant for maintaining ecological environment safety and recycling nuclear fuel. In this study, Al-CDC and Al-BDC with similar linear ligands were synthesized to reveal the influence of ligand regulation on Xe separation under different pressure conditions. The results displayed that the adsorption capacity of Al-BDC for Xe could reach 2.66 mmol g-1 under normal pressure, which is 1.11 times higher than that of Al-CDC, depending on its higher specific surface area and bigger pore volume. On the contrary, the Xe adsorption capacity of Al-CDC with the feature of narrow micropore structure and saturated C-H or oxygen-containing functional groups reached 1.44 mmol g−1 at 0.1 bar, which was 2.82 times higher than that of Al-BDC, resulting in a remarkable difference in Xe working capacity between Al-CDC (0.43 mmol g−1) and Al-BDC (0.073 mmol g−1) through dynamic breakthrough experiments. Meanwhile, the Henry's selectivity of Al-CDC for Xe/Kr and Xe/N 2 was up to 13.97 and 110.31, Compared with most porous adsorbents in previous reports, Al-CDC exhibits both high adsorption capacity and high selectivity. Innovatively, we analyzed the advantage in capacity and selectivity by the perspective of ligands, and the calculation results of the complete cell also proved that the saturated C-H group and benzene ring center on cyclohexane are the main adsorption sites of Al-CDC and Al-BDC for Xe, respectively. Therefore, a higher polar ligand in Al-CDC could lead to strong static binding energy and single cell binding energy which attribute to a high selective Xe adsorption. These results revealed the key structural characteristics for selective Xe adsorption under different pressure conditions, providing valuable suggestions for the design of separation materials from spent fuel. [Display omitted] ● Xe selective adsorption mechanism is proposed via experimental and quantum analyses. ● Higher specific surface area promotes Xe adsorption at normal pressure. ● Narrow channel is crucial to improve the London force effect on Xe at low pressure. ● Saturated C-H groups and high polarity profitably enhance Debye interactions for Xe. ● Carboxyl group and aromatic ring are attractive to Xe for CDC and BDC, respectively. [ABSTRACT FROM AUTHOR]

Background: Remimazolam is a novel ultrashort-acting intravenous benzodiazepine sedative-hypnotic. The combination of remimazolam and sevoflurane does not increase respiratory sensitivity, produce bronchospasm, or cause other adverse conditions. We aimed to observe the effects of different remimazolam doses on the minimum alveolar concentration (MAC) of sevoflurane at end-expiration during laryngeal mask insertion and evaluate the effect of sex on the efficacy of the combination of remimazolam on the suppression of laryngeal mask insertion in adult patients. Methods: We included 240 patients undergoing laparoscopic surgery under general anesthesia with elective placement of a laryngeal mask (120 males and 120 females). The patients were randomly divided into four groups according to sex: a control group (randomization for female patients, RF0; randomization for male patients, RM0) and three remimazolam groups (RF1, RM1 / RM2, RF2 / RM3, RF3), with 30 patients in each group. Induction was established by vital capacity rapid inhalation induction (VCRII), using 8% sevoflurane and 100% oxygen (6 L/min) in all patients. The (RF1, RM1), (RM2, RF2), and (RM3, RF3) groups were continuously injected with remimazolam at doses of 1, 1.5, and 2.0 mg/kg/h, respectively, while the (RM0, RF0) group was injected with an equal volume of normal saline. The end-expiratory concentration of sevoflurane was adjusted to a preset value after the patient's eyelash reflex disappeared. After the end-expiratory concentration of sevoflurane was kept stable for at least 15 min, the laryngeal mask was placed, and the patient's physical response to the mask placement was observed immediately and within 30 s of placement. The MAC of sevoflurane was measured using the up-and-down sequential method of Dixon. Results: The calculated MAC of end-expiratory sevoflurane during laryngeal mask insertion in adult females was (2.94 ± 0.18)%, (2.69 ± 0.16)%, (2.32 ± 0.16)% and (1.83 ± 0.15)% in groups RF0, RF1, RF2 and RF3; (2.98 ± 0.18)%, (2.80 ± 0.19)%, (2.54 ± 0.15)% and (2.15 ± 0.15)% in male groups RM0, RM1, RM2 and RM3, respectively. The MAC values were significantly lower in the (RF1-RF3, RM1-RM3) group when compared to the (RF0, RM0) group. There was no significant difference between (RF0, RF1) and (RM0, RM1), but the MAC value of the RF2-RF3 group was significantly lower than that of the RM2-RM3 group. Conclusions: Remimazolam can effectively reduce end-expiratory sevoflurane MAC values during laryngeal mask placement in adults. When remimazolam was measured above 1.5 mg/kg/h, the effect of inhibiting laryngeal mask implantation in female patients was stronger than that in male patients. Remimazolam at a dose of 1–2 mg/kg/h combined with sevoflurane induction can be safely and effectively used in these patients. [ABSTRACT FROM AUTHOR]

In a long and narrow corridor, the installation of roof smoke blocking structures is a measure to slow down the spread of fire smoke. When employing multiple smoke blocking structures, the spacing between these structures is a critical parameter that needs to be considered for optimal effectiveness. This paper analyzes the smoke blocking performance of double structures at different spacing and measures the smoke flow velocity both upstream and downstream of the double structures. According to the analysis of the smoke velocity vector obtained from numerical simulation, the smoke can be divided into three zones based on the flow state of the smoke after passing through the front smoke screen structure, namely the vortex zone, surge wave zone, and steady flow zone. When the rear smoke screen is located in the surge zone, the smoke blocking effect is optimal. Analysis of the morphology of the smoke layer indicates that the length of the vortex region is directly proportional to the upstream smoke flow velocity. The numerical and experimental results both indicate that an excessively large or small spacing between the structures fails to achieve optimal smoke control effectiveness. When the spacing is within an optimal range, the smoke velocity is the lowest. Finally, using a real architectural corridor as a case background, this paper presents a design example of roof smoke blocking structures. In order to arrange as many smoke blocking structures as possible, an appropriate spacing between the structures should be slightly larger than the vortex region. The smoke control effectiveness of multiple roof structures was validated through numerical simulation. As a result, the time required for smoke to pass through the corridor increases by 110 s. [ABSTRACT FROM AUTHOR]

A detailed experimental study of ethanol spray swirling flames was performed in an axial bluff body stabilized burner. The characteristics of the non-reacting and reacting sprays were recorded by particle imaging velocimetry (PIV) and planar laser-induced fluorescence (PLIF) of the OH radical. A few typical flames with different structures (outer-side-flame-lifting, stable, and near-blow-off) were compared and analyzed. The parameters of the spray, including the spray half-angle (α) and droplet number density (nd), are quantified, and it has been found the flame structure and stability were strongly correlated with the droplet distribution. Several parameters of the flow field, such as velocity magnitude ( | U | vorticity (ωz), and turbulent kinetic energy (TKE), are quantitively analyzed, and it is observed that the local strain rate rose as the air flow rate increased, which is not conducive to local flame stability. Regarding the flame, quantities such as progress variable (), flame height (Lf), lift–off height (hlf), and symmetry factor (Snd and S) are calculated, and it can be observed that the flame symmetry keeps worsening when approaching blow–off, and the inner flame branch exhibits a worse stabilization than the outer one. Our comprehensive investigations offer a deeper understanding of stable combustion in such two–phase flames. [ABSTRACT FROM AUTHOR]

• A novel performance-enhancement strategy for SLGHP geothermal system is proposed. • It relies on arousing inter-layer groundwater crossflow in reservoirs of multi-aquifers. • A numerical model is developed to describe and study the enhanced SLGHP system. • Effects of related parameters are comprehensively studied. The super-long gravity heat pipe (SLGHP) is a novel down-hole heat exchanger (DHE), which is in fast-developing and extremely suitable for deep-earth geothermal energy exploitation. The SLGHP itself has very high heat transfer coefficient, making the poor heat transfer capability of the surrounding geothermal formulations become the bottleneck constraining the overall performance of the SLGHP geothermal system. Inspired by the enhancing effect of the flowing groundwater in the aquifers on the thermal performance of the traditional DHE system, the present work proposes a heat transfer enhancement strategy based on arousing inter-layer crossflow in wellbore-connected multi-aquifers for the SLGHP geothermal system. A detailed numerical study is conducted to examine the effects of key parameters like the permeability and thickness of aquifers, the distance and pressure difference between aquifers. It is found that: i) a larger aquifer permeability leads to larger heat extraction rate of the SLGHP, but the heat extraction rate increment decreases due to the marginal effect when the aquifer permeability is larger than 10−12 m2; ii) a larger pressure difference improves the heat extraction of the SLGHP, the groundwater flow pattern from the deep to the shallow aquifers rather than the reversed pattern is found to be more beneficial due to the geothermal gradient; iii) the distance between aquifers shows a composite impact on the heat extraction performance of the SLGHP. A larger distance not only enlarges the heat transfer area between the SLGHP and the groundwater, but also creates an impeding effect on the heat uptake of SLGHP from the geothermal formation owing to the presentence of temperature-lowered groundwater in the flow path ending-part in the wellbore. In addition, the aquifer's thickness is found to have great impacts on the SLGHP heat extraction rate, and the "cask" effect may be encountered when the thickness difference between the connected aquifers is considerably large. [ABSTRACT FROM AUTHOR]