Search

In order to solve the difficulty of characterizing the optical constants of ZnS at high temperatures, the multi-phonon absorption dielectric function model which includes temperature parameters is constructed and modified in this paper. The multi-phonon absorption parameters of ZnS have been inverted based on variable temperature infrared transmittance spectra. The variable temperature infrared transmittance spectra of ZnS have been well fitted. The temperature dependence of the dissociation energy of ZnS materials is demonstrated, and the optical constants of the ZnS material have been obtained at 25 °C, 100 °C, 200 °C, 300 °C, and 400 °C. • The relationship between the value of m max and temperature is established in the multi-phonon absorption model of ZnS. • The ZnS multi-phonon parameters for various temperatures obtained by spectral inversion conform to physical laws. • Highly accurate variable-temperature optical constants of ZnS were obtained based on the multi-phonon absorption model. [ABSTRACT FROM AUTHOR]

Currently, research on the small-signal stability of grid-forming converters under two control modes, grid-following and grid-forming, mainly focuses on low-level converters. However, studies on the differences between grid-following modular multilevel converters (MMC) and grid-forming MMC are limited. A comprehensive analysis of the wideband oscillation risk differences in MMC-HVDC systems under these two control modes from the perspective of impedance characteristics is necessary. Therefore, based on the harmonic state-space (HSS) modeling theory, this article establishes wideband sequence impedance models for grid-forming and grid-following MMC. Subsequently, this article identifies key control parameters affecting the impedance characteristics of MMC under two control modes. The wideband oscillation risks of MMC-HVDC systems under both control modes are compared. The study indicates that when the grid strength weakens, grid-following MMC faces instability risks, while grid-forming MMC can maintain stability. In instances where high-frequency resonance peaks exist in the impedance of the grid, both control modes of MMC may face instability risks. Furthermore, by adjusting the obtained key control parameters of MMC, this article effectively suppresses the oscillation risk discussed above. Finally, the analysis results are verified through an electromagnetic transient simulation. [ABSTRACT FROM AUTHOR]

A two-stage process has been developed for the pyrolysis of high-density polyethylene to obtain light olefins, where probable mechanisms for each stage pyrolysis were proposed in our previous study. This work aims to establish molecular-level kinetic models for the first-stage pyrolysis at a lower temperature and for the second-stage pyrolysis at a higher temperature, respectively, to predict the overall reaction performances in accordance to the role of detailed mechanisms. A structure-oriented lumping (SOL) method based molecular-level kinetic model can effectively describe the first-stage pyrolysis, while a detailed molecular-level kinetic model is developed for the second-stage pyrolysis to track the evolutions of all alkanes, olefins, and diolefins, with special focus on the formation of light olefins. The established separate models can achieve the automatic generation of complex reaction networks and present good agreement with experimental data obtained from the first- and second-stage. In addition, the first-stage model indicates that the random scission plays an important role in the pyrolysis process at lower temperatures, while the chain-end scission mechanism dominates the second-stage reaction to produce light olefins at higher temperatures. As a whole, the molecular-level modelling scheme behaves excellently at a wide range of temperature, which provides guidance for upgrading the pyrolysis process. • A molecular level kinetic model is established for the two-stage HDPE pyrolysis. • The reaction network is generated automatically and visualized. • This model achieves excellent agreement with experimental data. • The competition of two scissions and important role of temperature are quantified. [ABSTRACT FROM AUTHOR]

Maize is one of the most successful crops with regard to the utilization of heterosis. The haploid induction technique is one of the fastest methods to obtain pure maize material at the present stage. However, the molecular mechanism of haploid doubling is rarely reported. In this study, we treated B73 and ZNC442 haploid young shoots with colchicine for 0 h, 6.2 h, and 10 h, and analyzed the differentially expressed genes (DEGs). We found that colchicine treatment for 6.2 h and 10 h compared to 0 h resulted in a total of 4868 co-DEGs. GO enrichment analysis and KEGG metabolic pathway analysis found significantly enriched 282 GO terms and 31 significantly pathways, respectively. Additionally, The GO term and KEGG pathway genes of spindle, cytoskeleton, microtubules and nuclear division were selected for analysis, and three candidate genes were screened by taking intersections. Zm00001d033112, Zm00001d010525, and Zm00001d043386 were annotated as kinesin-associated protein 13, kinesin-like protein KIN-10C, and kinesin light-chain LC6, respectively. The real-time fluorescence quantification (RT-PCR) results revealed that Zm00001d033112, Zm00001d010525, and Zm00001d043386 had the same trends as RNA-seq. Interestingly, Zm00001d033112 is homologous gene AT3G20150 in Arabidopsis, which was involved in the regulation of chromosome movement and mitotic spindle assembly. Our study suggests that kinesin genes may play an important role in doubling chromosomes, thus providing valuable information for future studies on the molecular mechanisms of chromosome doubling in maize. [ABSTRACT FROM AUTHOR]

• The onset and termination electric potential to form the steady cone-jet electrospray increase as conductivity increasing. • The lower and upper limitation of liquid flowrate to form the steady cone-jet electrospray decrease as conductivity increases. • The varicose instability can transform into whipping instability as the electrical conductivity increasing. • The jet breakup instability transition mechanism is interpreted by theoretical analysis. • The whipping to similar micro-dripping instability can be observed for EG with higher conductivity. In present work, the effect of the electrical conductivity on the steady cone-jet electrospray are experimentally investigated, where the operating diagram and the jet breakup instability are extensively examined. A hemispherical tube is employed as spraying nozzle severed as high electric potential electrode in a needle-plated electrode configuration compared to the common and sheathed tubes. The cone-jet electrospray is visualized by a high-resolution camera and extensively analyzed offline. The aqueous solution in ethanol, Diethyleneglycol (DEG) and Ethylene glycol (EG) are atomized with varied electrical conductivity under different high electric potentials and flowrates. Experimental results indicate that the cone-jet electrospray can operate in the certain ranges of operating parameter for all types of capillaries. The operating diagram for the hemispherical tube is significantly broader than other tubes because of various electric field strength distribution. The onset electric potential to determine a steady cone-jet electrospray gradually increases and the termination value also increases as the electrical conductivity increases. The lower and upper flowrate to form a steady cone-jet electrospray also increase as the electrical conductivity increases. The jet breakup instability can transit from varicose to whipping due to low the reference flow rate as electrical conductivity increases, which is agreement with theoretical analysis. In particular, for EG, the transition from whipping to similar micro-dripping is observed as the electrical conductivity increases, while the transition also occurs as flowrate increases for EG with higher electrical conductivity. The increase in the electrical conductivity and flowrate elongates the cone due to EHD body force, which causes the electric field varying, further resulting in the difference in jet breakup instability. Moreover, the electrical conductivity also plays an important role in jet breakup length. The instability variation of jet with conductivity (DEG), q V =1000 nL/s, ϕ =8.00 kV (Hemispherical nozzle with D o =0.70mm); The variation with liquid flow rate of EG with higher conductivity (K =8.5 × 10−4 s/m, ϕ =10.20 kV, (Hemispherical nozzle with D o =0.70mm) [Display omitted] [ABSTRACT FROM AUTHOR]

The Yangtze River Economic Belt (YREB) is an important strategic area in China. However, frequent extreme precipitation events have caused great economic losses and human casualties in this region. In this article, we explore the spatial and temporal links between extreme precipitation events and Sunspot Number (SSN), El Niño Southern Oscillation (ENSO), Arctic Oscillation (AO) and Pacific Decadal Oscillation (PDO) in this important economic belt. According to the research findings, all of the extreme precipitation indices (EPIs) except for consecutive dry days (CDD) and consecutive wet days (CWD) showed an upward trend in the YREB over the 59 years. The spatial distributions of very wet days (R95p), extremely wet days (R99p), max 1-day precipitation amount (Rx1day) and max 5-day precipitation amount (Rx5day) had similar distribution patterns, showing decreasing trends from east to west. The EPIs generally had a 2–4-year band, suggesting stronger and more elusive changes. The wavelet coherence (WTC) spectra suggested that SSN, ENSO, AO, and PDO have different effects on extreme precipitation events during different time periods. Before 1985, the SSN, ENSO, AO, PDO and extreme precipitation events shared similar oscillation periods, but after 1985, their oscillation periods were no longer consistent with each other. In addition, solar activity and the AO mainly had negative correlations with extreme precipitation events, while the ENSO and PDO had predominantly positive correlations with the EPIs. This paper provides a reference for national economic strategic planning and natural resource management in the YREB. [ABSTRACT FROM AUTHOR]

The concentration of uranium in the rock sample was 35.0 μg/g, the concentration ratio of CO2 and O2 injected was 1:1, the autoclaves pressure was 0.02 MPa. The uranium leaching rate varied from 28.70 to 37.97%, and when the concentration of HCO3− is lower, the output rate of U is significantly increased as it increases, when its concentration exceeds the threshold value, U’s output concentration is no longer infinitely increased. Calcite and dolomite were saturated and precipitated during the leaching process due to the high initial pH; with the injection of CO2, calcite and dolomite remained near- or under-saturated and did not precipitate. [ABSTRACT FROM AUTHOR]

[Display omitted] • A rational coating-integrated-into-synthesis design was used to prepare surface Ti-enriched NMC811 material. • The Ti substitute has a unique tri-valence (Ti3+) in a gradient surface distribution. • The surface Ti-enriched NMC811has high cationic ordering both in the bulk and surface. • Theoretical simulations certify enhanced stability of lattice oxygen for the NMC811#Ti material. • The NMC811#Ti cathode shows improved cycling performance and thermal/ storage stabilities. High-Ni cathodes are being intensely pursued worldwide for electric vehicles and other energy-dense applications due to their high capacity and low cost. However, structural instabilities during electrochemical cycling and when subjected to thermal treatment have been the major issues hindering their practical deployment. We here report a rational design of coating-integrated-into-synthesis protocol for fabricating surface Ti-enriched LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811#Ti) material. The coating to intermediates is crucial to obtain high structural ordering, both in the bulk and surface of high-Ni cathodes, and the Ti substitute has a unique tri-valence (Ti3+) in a gradient surface distribution. The simulations of projected density of states in the atomistic understanding further certify significantly enhanced stability of lattice oxygen for the NMC811 through such a Ti3+-based structure reinforcement. Consequently, the NMC811#Ti cathode delivers a high capacity up to 200 mAh g−1 at 0.1 C, along with superior stabilities during air-storage and thermal treatment (up to 297 °C at the fully charged state under differential scanning calorimetric measurements). The corresponding NMC811#Ti||graphite full cell exhibits a desired 83.6 % capacity retention after 1000 cycles at 0.5 C in a voltage range of 2.8–4.3 V. This work demonstrates a delicate surface reinforcement to stabilize high-Ni cathodes for long-life and safe lithium-ion batteries. [ABSTRACT FROM AUTHOR]

[Display omitted] • Novel, potent and effective EZH2 degraders were developed. • Compound P4 can effectively induce EZH2 protein degradation and inhibit breast cancer cell growth. • Compound P4 can significantly decrease the degree of H3K27me3 in MDA-MB-231 cell line, induce apoptosis and G 0 /G 1 phase arrest in Pfeiffer and MDA-MB-231 cell lines. • Compound P4 significantly inhibited the migratory and invasive capacity of MDA-MB-231 cells at micromolar concentrations in a dose-dependent manner. • Adequate metabolic stability in vitro. EZH2 (enhancer of zeste homolog 2) is one of the most important histone methyltransferases (HMTs), and overexpression of EZH2 can lead to proliferation, migration and angiogenesis of tumor cells. But most of EZH2 inhibitors are only effective against some hematologic malignancies and have poor efficacy against solid tumors. Here, we report the design, synthesis, and evaluation of highly potent proteolysis targeting chimeric (PROTACs) small molecules targeting EZH2. We developed a potent and effective EZH2 degrader P4 , which effectively induced EZH2 protein degradation and inhibited breast cancer cell growth. Further studies showed that P4 can significantly decrease the degree of H3K27me3 in MDA-MB-231 cell line, induce apoptosis and G 0 /G 1 phase arrest in Pfeiffer and MDA-MB-231 cell lines. Therefore, P4 is a potential anticancer molecule for breast cancer treatment. [ABSTRACT FROM AUTHOR]