Search

Abstract: In this paper a two-dimensional model of an annular cylindrical reactor filled with metal hydride suitable for hydrogen storage is presented. Comparison of the computed bed temperatures with published experimental data shows a reasonably good agreement except for the initial period. Effects of hydrogen pressure and external fluid temperatures on heat transfer and entropy generation are obtained. Results show that the time required for hydrogen charging and discharging is higher when the thermal capacity of the reactor wall is considered. The time required for absorption and desorption can be reduced significantly by varying the hydrogen gas pressure and external fluid temperatures. However, along with reduction in time the entropy generated during hydrogen storage and discharge increases significantly. Results also show that for the given input conditions, heat transfer between the external fluid and hydride bed is the main source of entropy generation. [Copyright &y& Elsevier]

Abstract: In this paper, a three-dimensional hydrogen absorption model is developed to precisely study the hydrogen absorption reaction and resultant heat and mass transport phenomena in metal hydride hydrogen storage vessels. The 3D model is first experimentally validated against the temperature evolution data available in the literature. In addition to model validation, the detailed 3D simulation results show that at the initial absorption stage, the vessel temperature and H/M ratio distributions are uniform throughout the entire vessel, indicating that hydrogen absorption is very efficient early during the hydriding process; thus, the local cooling effect is not influential. On the other hand, non-uniform distributions are predicted at the subsequent absorption stage, which is mainly due to differential degrees of cooling between the vessel wall and core regions. In addition, a parametric study is carried out for various designs and hydrogen feed pressures. This numerical study provides a fundamental understanding of the detailed heat and mass transfer phenomena during the hydrogen absorption process and further indicates that efficient design of the storage vessel and cooling system is critical to achieve rapid hydrogen charging performance. [Copyright &y& Elsevier]

Abstract: The paper presents a model-based investigation of a metal hydride reactor applied as a solid state hydrogen storage device. The elements of a metal hydride reactor are hydrogen supply duct, internal hydrogen distribution, hydride bed, reactor shell and the flow domain of the heat transfer fluid. Internal hydrogen distribution and hydride bed are porous media. Therefore, hydrogen flows through non-porous and porous regions during its reversible exothermic absorption and endothermic desorption, respectively. The interface between porous and non-porous regions is a discontinuity with respect to energy transport mechanisms. Hence, Danckwerts-type boundary conditions for the energy balance equation are introduced. Application of the first and second law of thermodynamics to the interface reveals that temperature jumps may occur at the hydrogen inlet but are not allowed at the hydrogen outlet. Exemplarily the loading behavior of a metal hydride storage tank based on sodium alanate is analyzed. It is demonstrated and experimentally validated that only Danckwerts-type boundary conditions predict the important cooling effect of the inlet hydrogen on the exothermic absorption process correctly. [Copyright &y& Elsevier]

Abstract: In this paper, hydriding in a cylindrical metal hydride hydrogen storage tank containing HWT5800 (Ti0.98Zr0.02V0.43Fe0.09Cr0.05Mn1.5) is numerically studied with a two-dimensional mathematical model. The heat and mass transfer of this model is computed by finite difference method. The effects of supply pressure, cooling fluid temperature, overall heat transfer coefficient and height to the radius ratio of the tank (H/R) on the hydriding in the hydrogen storage tank are studied. It is found that hydride formation initially takes place uniformly all over the bed and hydriding processes take place at a slower rate at the core region. Supply pressure, cooling fluid temperature and overall heat transfer coefficient play significant roles during the absorption of hydrogen. At the H/R=2 both maximum bed temperature and the average bed temperature are the highest, and the hydride bed takes the longest time to saturate. [ABSTRACT FROM AUTHOR]