Search

• Nitrogen atoms in Ni@NCNT facilitate the in-situ conversion of metallic Ni to Ni3+ species. • Nitrogen atoms in Ni@NCNT weaken the interaction between Ni3+ and CO 2 in urea oxidation. • 1.56 V is required to achieve 10 mA cm−2 in overall urea oxidation for Ni@NCNT. Urea electro-oxidation is an attractive and alternative anodic reaction in the electrochemical generation of hydrogen using wastewater ascribing to the low theoretical voltage and non-precious metal (nickel) catalyst for urea oxidation reaction (UOR); however, the sluggish UOR and poisoning of catalyst impede the practical application. Here, in this work, we synthesize a series of nickel nanoparticles embedded nitrogen doped carbon nanotubes (Ni@NCNT) and study the effect of nitrogen dopants on UOR catalytic activity. The nitrogen dopants can weaken the binding strength between CO 2 species and active sites resulting in alleviation of CO 2 poisoning; simultaneously, nitrogen dopants also promote the in-situ conversion of Ni3+ species facilitating UOR catalysis; as a result, electrocatalytic current density of 45.8 mA cm−2 is recorded for Ni@NCNT in 1 M KOH electrolyte with 0.5 M urea at 1.5 V vs. RHE, which is 3.8 fold better than commercial Pt/C (11.8 mA cm−2). Moreover, Ni@NCNT, due to the more nitrogen dopants, exhibits a comparable overpotential to commercial Pt/C for driving hydrogen evolution reaction (HER) catalysis in 1 M KOH electrolyte at high current density (400 mA cm−2). Subsequently, 1.56 V is demanded for overall UOR catalysis on Ni@NCNT with current density of 10 mA cm−2. This work offers useful information for designing a stable and efficient electrocatalyst for not only UOR but also electrochemical generation of H 2 from wastewater. [ABSTRACT FROM AUTHOR]

Highly active and stable electrocatalysts at low cost for hydrogen evolution reaction are essential for large scale hydrogen production. The Ni 3 P-Ni heterostructure confined in 3D networks of carbon nanotube (CNT) has been successfully prepared as the hydrogen evolution reaction (HER) electrode. The morphology and phase composition of Ni 3 P-Ni heterostructure are tunable by varying the acid pickling time. The Ni 3 P-Ni/CNT composite electrode with optimized Ni:Ni 3 P ratio of 22.29 wt% demonstrate high catalytic activity and excellent stability for HER. It demonstrates a comparable HER activity to the standard Pt electrode in alkaline solution, i.e., overpotentials of 116 vs 67 mV at 10 mA·cm−2 and Tafel slops of 59 vs 37 mV·dec−1. No degradation is observed after 1000 cyclic voltammetry (CV) cycles or 50 h operation under constant 0.3 V overpotential. • Pickling affects the morphology of heterogeneous structure and the content of Ni. • The Ni 3 P-Ni heterostructure was anchored to the carbon nanotube network by ball milling. • The electrode was prepared by mixing with PTFE and pressing. • The results show that Ni 3 P-Ni/CNT electrode has the best hydrogen evolution activity when the Ni/Ni 3 P ratio is 22.29 %. [ABSTRACT FROM AUTHOR]