Search

We report a novel fabrication of nickel-molybdenum alloy nanorods catalyst for hydrogen evolution reaction (HER), which is prepared by co-deposition of pure nickel and molybdenum in a multisource sputtering system on the surface of Ni foam substrate. The Ni–Mo alloy film exhibits favorable vertical nanorods structure and presents the most efficient activity for HER compared to the film only including one metal element. The remarkably enhanced catalytic activity is attributed to its ordered array geometry as well as the synergistic interaction between Ni and Mo. Meanwhile, the open space within nanorod arrays facilitates the electrolyte penetration and diffusion of ionic species, allowing high utilization efficiency of active species as well as rapidly release of evolved hydrogen gas from the electrode surface. [ABSTRACT FROM AUTHOR]

The ordered mesoporous Co/KIT-6 catalysts with different Co loading (15–30 wt%) were prepared by impregnation method for CO 2 hydrogenation. The physicochemical properties of the catalysts were characterized by H 2 -TPR, XRD, BET, H 2 -TPD, and CO 2 -TPD. The results show that the crystal size of Co species increases with the increasing Co content and the dispersion of Co species reveals an opposite trend. The adsorption capacities of H 2 and/or CO 2 molecules achieve a maximum value at the Co loading of 25 wt%. The CO 2 reaction rate and CH 4 selectivity are in the following order: Co15 < Co20 < Co30 < Co25. With the increasing of Co loading, the CO 2 reaction rate increases from 2.21 × 10 −5  mol/g cat /s (CO 2 conversion of 29.8%) for the Co15 catalyst to 3.91 × 10 −5  mol/g cat /s (CO 2 conversion of 52.6%) for the Co25 catalyst, and the CH 4 selectivity improves from 67.0% for the Co15 catalyst to 94.5% for the Co25 catalyst at 360 °C, while the other product is CO. The catalytic performance and products distribution of the Co/KIT-6 catalysts for CO 2 hydrogenation are sensitive to the crystal size of Co species which can be adjusted by changing the Co content in Co/KIT-6 catalysts. [ABSTRACT FROM AUTHOR]

[Display omitted] • An extension of classic deep oxidation CuMnOx catalysts to selective oxidation of alcohol with high efficiency. • CuMnOx catalysts characterized by Mn 2 O 3 -Cu 1.4 Mn 1.6 O 4 and CuO-Cu 1.4 Mn 1.6 O 4 oxide pairs. • Mn 2 O 3 -Cu 1.4 Mn 1.6 O 4 oxide pair is more active than CuO-Cu 1.4 Mn 1.6 O 4 oxide pair. • Rich Cu+ species in Mn 2 O 3 -Cu 1.4 Mn 1.6 O 4 oxide pair is essential to achieve high catalytic activity. This work presents an extension of classic deep oxidation CuMnOx catalysts to a selective oxidation of alcohol with high efficiency and in an environmental-friendly reaction system. A series of CuMnOx catalysts characterized by CuO-Cu 1.4 Mn 1.6 O 4 and Mn 2 O 3 -Cu 1.4 Mn 1.6 O 4 oxide pairs were prepared via a novel half carbonized citrus grandis peel assisted hard template method. A shift of the oxide pairs from CuO-Cu 1.4 Mn 1.6 O 4 to Mn 2 O 3 -Cu 1.4 Mn 1.6 O 4 has been achieved by tuning Cu/Mn molar ratio, and then leads to a one-pass benzaldehyde yield more than 50% with 100% benzaldehyde selectivity in the selective oxidation of benzyl alcohol using H 2 O 2 as oxidant. Higher relative amount of Cu 1.4 Mn 1.6 O 4 in either Mn 2 O 3 -Cu 1.4 Mn 1.6 O 4 or CuO-Cu 1.4 Mn 1.6 O 4 oxide pair is found to be essential for achieving high catalytic activity. The interaction between the Cu 1.4 Mn 1.6 O 4 constituent and Mn 2 O 3 constituent of Mn 2 O 3 -Cu 1.4 Mn 1.6 O 4 oxide pair is found to able to enhance the formation of Cu+ species, which can reacts with H 2 O 2 to produce •OH and then touch off a Fenton-like catalytic oxidation process of benzyl alcohol, in the current CuMnOx-H 2 O 2 system, to produce benzaldehyde with high selectivity. This work presents a new perspective in the development of highly effective and low cost CuMnOx catalysts for heterogeneous catalytic oxidation reactions. [ABSTRACT FROM AUTHOR]

[Display omitted] • A new understanding in the active site of CuMnOx catalysts. • CuMnOx catalysts are composed by uniform CuO-Mn 2 O 3 oxide pairs. • Highly isolated CuO nano-particles are essential for CuO-Mn 2 O 3 oxide pairs. • Cu-O-Mn sites are found to be the active sites of CuO-Mn 2 O 3 oxide pairs. The current work provide a new understanding on the active site of CuMnOx catalysts and thus offer a new perspective in the development of highly effective and low cost CuMnOx catalysts for heterogeneous catalytic oxidation reactions. A series of dual-component copper-manganese multi-oxide catalysts (CuMnOx) have been successfully synthesized using a surfactant assisted hydrolysis-hydrothermal method and studied by XRD, N 2 adsorption–desorption test, ICP-AES, SEM, Aberration-corrected HADDF-STEM, HRTEM, FT-IR, Raman, XPS, H 2 -TPR. These CuMnOx catalysts were found to be composed with uniform CuO-Mn 2 O 3 oxide pair structure, in which highly isolated/dispersed CuO species are anchored in the framework of Mn 2 O 3. It was found that the speciation in these CuMnOx catalysts presents a shift from highly isolated or even single Cu2+ oxide species (Cu2+Ox) to CuO nanoclusters and CuO microcrystalline with increasing Cu content. In CO oxidation reaction, which was employed to probe the structure of the CuO-Mn 2 O 3 oxide pairs in these CuMnOx catalysts, the Cu-O-Mn sites in those CuMnOx catalysts with highly isolated or highly dispersed CuO species were found to be highly active. For CuO-Mn 2 O 3 oxide pair catalysts, the highly isolated/dispersed CuO species in Mn 2 O 3 framework is essential to achieve high activity. [ABSTRACT FROM AUTHOR]