Search

CREATE-NL+ is a FEM (Finite Elements Method) solver of the free boundary dynamic plasma equilibrium problem, i.e. the MHD (Magneto Hydro Dynamics) time evolution of 2D axisymmetric plasmas in toroidal nuclear fusion devices, including eddy currents in the passive structures, and feedback control laws for current, position and shape control. This is an improved version of the CREATE-NL code developed in 2002 which was validated on JET and used for the design of the XSC (eXtreme Shape Controller), and for simulation studies on many existing and future tokamaks. A significant improvement was the use of a robust numerical scheme for the calculation of the Jacobian matrix within the Newton based scheme for the solution of the FEM nonlinear algebraic equations. The improved capability of interfacing with other codes, and a general decrease of the computational burden for the simulation of long pulses with small time steps makes this code a flexible tool for the design and testing of magnetic control in a tokamak. [ABSTRACT FROM AUTHOR]

To prepare the DEMO conceptual design phase a number of physics and engineering assessments were carried out in recent years in the frame of EFDA concluding in an initial design configuration of a DEMO tokamak. This paper gives an insight into the identified engineering requirements and constraints and describes their impact on the selection of the technologies and design principles of the main tokamak components. The EU DEMO program aims at making best use of the technologies developed for ITER (e.g., magnets, vessel, cryostat, and to some degree also the divertor). However, other systems in particular the breeding blanket require design solutions and advanced technologies that will only partially be tested in ITER. The main differences from ITER include the requirement to breed, to extract, to process and to recycle the tritium needed for plasma operation, the two orders of magnitude larger lifetime neutron fluence, the consequent radiation dose levels, which limit remote maintenance options, and the requirement to use low-activation steel for in-vessel components that also must operate at high temperature for efficient energy conversion. [ABSTRACT FROM AUTHOR]

The Plasma Control System Simulation Platform (PCSSP) is a highly flexible, modular, time-dependent simulation environment developed primarily to support development of the ITER Plasma Control System (PCS). It has been under development since 2011 and is scheduled for first release to users in the ITER Organization (IO) and at selected additional sites in 2015. Modules presently implemented in PCSSP enable exploration of axisymmetric evolution and control, basic kinetic control, and tearing mode suppression. A basic capability for generation of control-relevant events is included, enabling study of exception handling in the PCS, continuous controllers, and PCS architecture. While the control design focus of PCSSP applications tends to require only a moderate level of accuracy and complexity in modules, more complex codes can be embedded or connected to access higher accuracy if needed. This paper describes the background and motivation for PCSSP, provides an overview of the capabilities, architecture, and features of PCSSP, and discusses details of the PCSSP vision and its intended goals and application. Completed work, including architectural design, prototype implementation, reference documents, and IO demonstration of PCSSP, is summarized and example use of PCSSP is illustrated. Near-term high-level objectives are summarized and include preparation for release of an “alpha” version of PCSSP and preparation for the next development phase. High-level objectives for future work are also discussed. [ABSTRACT FROM AUTHOR]

Abstract: The aim of the PFX Operating Early Task (POET) was to obtain a highly shaped plasma and x-point formation in the early phases of the discharge. The PFX is an amplifier which feeds the central pancakes of the JET primary circuit. In the past it was possible to energize the PFX circuit only when the PFGC current, which feeds all the coils of the primary circuit, was already flowing in the same direction as the PFX current would have flowed, to avoid repulsive vertical forces which would tend to lift the top pancakes of the central solenoid, balanced only by the net weight of the upper part of the JET machine. In this paper the modeling activity performed to provide a more accurate estimate of the ejection forces acting on the upper coils in order to safely widen the operational space, by using two dimensional finite element electromagnetic models and the simulation of the performances of the actual controller algorithm on tracking the desired references of current are described. Finally will be presented the results of the implemented POET system, routinely used in JET in the 2011/2012 experimental campaigns, in terms of anticipation of x-point formation and enhanced system flexibility. [Copyright &y& Elsevier]

Abstract: The JET enhancement project Plasma Control Upgrade (PCU) aimed at increasing the capabilities of the plasma vertical stabilization (VS) system. One of the activities of this project was devoted to the development of simple but sufficiently accurate models of the VS system so as to address the main design choices, use the simulation tools as reliable test-beds, and provide an adequate support to the engineering design and commissioning of the new Enhanced Radial Field Amplifier (ERFA). This paper illustrates some of the main achievements of the modelling activity, which gave rise to a closed loop model of the VS system, including plasma, PF coils and passive structures. In particular the paper deals with the selection of the set of turns to be used in the control coils and with the estimation of the eddy current effects on the VS system. The latter analysis addressed an upgrade of the converter units of ERFA, successfully implemented during its commissioning on plasma in August 2009. [Copyright &y& Elsevier]

Abstract: A new model-based plasma current and shape controller has been set up and tested on the JET Tokamak with the existing active circuits and control. The installation has been carried out without causing any interference to the plasma operation and without requiring a long commissioning time. Eventually, the new controller was used on really extremely shaped internal transport barrier experiments at high poloidal beta and in the presence of quite large variations of the plasma current density profile (variation range Δβ pol up to 1.5 and Δl i up to 0.5). The extreme shape controller (XSC) controller architecture and philosophy also offer new interesting opportunities, e.g., the separatrix sweeping on the divertor plates without significantly affecting the overall plasma shape, and the possibility of improving the overall tokamak performance via combined control of plasma shape, current and profile. The adopted methodology constitutes also an important test bed for feedback control strategies of ITER relevance. [Copyright &y& Elsevier]