Search

A microwave power transmission (MPT) demonstration system was assembled to comprehensively emulate the operating mode of MPT in space solar power station (SSPS). Based on solid power amplifier and phased antenna array, this system comprised three main parts, that is, microwave power transmitting subsystem, microwave power rectenna subsystem, and power beam steering subsystem. It was employed to validate the constraint relationship between beam collection efficiency and the sizes of transmitting antenna and rectenna, transmission distance, operation frequency. High efficiency rectifying and accurate beam steering were also demonstrated. The power transmitting antenna was composed of 64 sub‐arrays of patch antennas, with the dimension of 1.2 × 1.2 m2. In addition, the rectenna array was constructed as a corner truncated square with the side length of 2 m. Its design was based on the concept of perfectly matched layer and integrated rectifying surface. The power beam steering subsystem, implemented with software retrodirective idea, pointed the microwave beam to the rectenna according to the direction of arrival of the pilot signal. The experimental MPT system, operating at 5.8 GHz, transmitted 910 W microwave power across 30 m distance. At the power receiving end, the optimum rectenna conversion efficiency of 49.3% was obtained. With aid of the beam steering subsystem, beam granularity, and beam steering accuracy of 0.23 and 0.18° were achieved, respectively. The compositive experiment verified all function as power transmitting, receiving, rectifying, and steering of MPT system. MPT technology is thus driven toward engineering application, and will ultimately space solar power exploration. [ABSTRACT FROM AUTHOR]

A design of millimeter wave (mm‐wave) dual‐polarized multibeam antenna array (MAA) with a boresight beam is presented. In order to generate a boresight beam, a 5 × 6 Butler matrix based on three‐way directional couplers is designed as the beamforming network, which achieves equal power division and −60°, +120°, 0°, −120°, +60° progressive phase differences among the output ports when the five input ports are excited, respectively. By four‐layer design, the two 5 × 6 BMs for horizontal polarization (HP) and vertical polarization (VP) are constructed. The patch is used as radiator element, and the HP and VP wave are excited by aperture coupling and microstrip feed, respectively. A prototype is fabricated and measured to verify the design. The measured results show that the designed mm‐wave dual‐polarized MAA can generate five radiation beams including a boresight beam and the five beams with HP and VP cover the range of ±50° at 28 GHz. In addition, the designed mm‐wave dual‐polarized MAA can be a potential option for mm‐wave multibeam application. [ABSTRACT FROM AUTHOR]

A design of planar dual‐polarized differentially fed multibeam patch antenna array (DFMPAA) is presented in this article. The dual‐polarized DFMPAA is composed of two circular 4 × 4 butler matrixs (BMs) and a 1 × 4 dual‐polarized patch antenna array. The two BMs are designed in the top and bottom layer as the feeding network of horizontal polarization (HP) and vertical polarization (VP), respectively. The patch is designed as the radiation element of the dual‐polarized DFMPAA, which is fed by the slot and aperture coupling to generate the HP and VP wave, respectively. To achieve high cross‐polarization discrimination (XPD), the antenna element is fed differentially. A prototype working at 5.5 GHz is fabricated and measured in order to validate the performance of the proposed dual‐polarized DFMPAA. The dimension of the dual‐polarized DFMPAA is 3.8 λ0 × 1.7 λ0. Measured results show that when the beam scan to the maximal pointing angle, the XPD of the dual‐polarized DFMPAA in HP and VP are higher than 27 and 29 dB, respectively. Additionally, the beams of the dual‐polarized DFMPAA can cover the range of ±42° in horizontal plane. [ABSTRACT FROM AUTHOR]