Search

Summary: The continuous increase of the distributed energy resources (DERs) penetration levels leads to voltage stability problems in the distribution system. One of the approaches for the mentioned emerging challenge is the proper placement of automatic voltage regulators (AVRs). This paper investigates the optimal placement and sizing of AVRs in a distribution network by presenting a new modification of the teaching‐learning‐based optimization (TLBO) algorithm. The objective functions consist of minimizing the distribution system voltage deviation, energy generation cost, and electrical losses. The modification improves the convergence velocity and accuracy of the TLBO algorithm using the combination of mutation technique and quasi‐opposition‐based‐learning concept. This paper compares the performance of the proposed algorithm with other famous evolutionary algorithms. The test distribution system contains installed DERs that work more efficiently after the placement of AVRs based on the mentioned objective functions by the proposed optimization algorithm. The simulation results display the best optimization algorithms for AVRs placement with a significant level of less than 0.10 (ie, probability‐value). The proposed multiobjective optimization algorithm's considerable merit is the accuracy and convergence velocity in solving this specific optimization problem. [ABSTRACT FROM AUTHOR]

Summary: In this paper, a multi‐objective coyote optimization algorithm (MOCOA) is proposed for techno‐economic benefits of simultaneous placement of fault current limiters (FCLs) and distributed generation (DGs) units in distribution grids. The proposed MOCOA is employed for mitigating the loss of power in distribution lines, minimizing the fault current levels, minimizing the economic costs of FCL size, enhancing the total voltage stability index, and reducing the total voltage deviation. The MOCOA is enhanced by emerging the concept of pareto‐optimal dominance to store the distinguished solutions in each generation. Finally, TOPSIS, a technique is implemented to find the compromise solution to fulfill the operator requirements. Applications are carried out in three distribution systems. The simulation results show the great effectiveness of the proposed MOCOA in acquiring several alternatives with appropriate technical improvements in power losses, voltage stability, fault level reduction, and economical FCL size. [ABSTRACT FROM AUTHOR]

Summary: This paper proposes a two‐stage planning approach for the efficient utilization of distributed generation (DG) and capacitor banks (CBs) for the simultaneous grid‐connected and islanded operations of the balanced distribution networks. The first stage determines the optimal installation locations and capacities of DGs and CBs using an improved variant of the Jaya optimization algorithm (IJaya) to minimize the power losses and voltage deviation during the grid‐connected operation of the distribution network. The second stage identifies the optimal operating point of the DG and CB combination to carry the maximum load during the islanded network operation under power supply‐demand imbalance conditions. For the second stage, an analytical approach is proposed to identify the best operating power factor for the DG‐CB combination, calculating the power loss, and under‐utilization of the installed real‐reactive power sources. Simulation results on the IEEE 33‐bus grid‐dependent distribution network demonstrate that the proposed IJaya significantly improved the network performance and outperforms various existing optimization methods. In addition, during the network's islanded operation, maintaining the network power factor equal to the source power factor (pfsource) makes the DG‐CB combination operate at their rated capacities. [ABSTRACT FROM AUTHOR]

In this paper, two-level decentralized optimization power dispatch control strategies are proposed in an islanded microgrid without communication network to ensure frequency security and economic benefit. First, the secondary-level decentralized optimization control strategy is designed only by using local measurement regarding frequency deviation. It is able to implement the optimal power dispatch for all dispatchable distributed generation units in a coordinated way in order to completely restore the system frequency with minimum operation cost. Then, the first-level decentralized droop compensation control strategy is designed to implement real-time optimal power sharing among all energy storage units in order to quickly compensate large supply-demand imbalance and ensure frequency security. Moreover, the proposed control strategies are proved to be able to meet the requirements of the 'plug and play' operation in the absence of communication network. Simulation results verify the validity of the proposed method. Copyright © 2016 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]