Search

In this paper, we propose a new method to design low-density parity-check Hadamard (LDPC-Hadamard) codes — a type of ultimate-Shannon-limit approaching channel codes. The technique is based on applying Hadamard constraints to the check nodes in a generalized protograph-based LDPC code, followed by lifting the generalized protograph. We name the codes formed protograph-based LDPC Hadamard (PLDPC-Hadamard) codes. We also propose a modified Protograph Extrinsic Information Transfer (PEXIT) algorithm for analyzing and optimizing PLDPC-Hadamard code designs. The proposed algorithm further allows the analysis of PLDPC-Hadamard codes with degree- 1 and/or punctured nodes. We find codes with decoding thresholds ranging from −1.53 dB to −1.42 dB. At a BER of 10−5, the gaps of our codes to the ultimate-Shannon-limit range from 0.40 dB (for rate = 0.0494) to 0.16 dB (for rate = 0.003). Moreover, the error performance of our codes is comparable to that of the traditional LDPC-Hadamard codes. Finally, the BER performances of our codes after puncturing are simulated and compared. [ABSTRACT FROM AUTHOR]

In this paper, the backward-compatible coding schemes are explored to achieve the near-capacity performances in dynamic LDPC-coded Gaussian multiple access channels (GMAC). Specifically, some user-load-compatible (ULC) masked edges in a raptor-like protograph are masked with the variation of user load u. To distinguish the edges in a protograph, a multi-user protograph-based extrinsic information transfer (MU-PEXIT) chart is developed. Based on this chart, an iterative edge selection algorithm combined with a theoretical simplification is proposed to facilitate the selection of independent masked edge sets (MESs) for varying u. To further decrease the complexity of the independent masking scheme, a nested version is presented, where the MESs for varying u are nested and derived from the same mother MES. Meanwhile, nested selection algorithms are provided to select the nested MESs. Extensive simulation results demonstrate that the masked 5G-NR LDPC codes can maintain near-capacity performances regardless of the variation of u. Besides, these ULC masked codes achieve comparable performances with the state-of-the-art LDPC codes which are specially re-designed in a static GMAC. [ABSTRACT FROM AUTHOR]

This paper investigates the design and performance of delayed bit-interleaved coded modulation (DBICM) with low-density parity-check (LDPC) codes. For Gray labeled square M-ary quadrature amplitude modulation (QAM) constellations, we investigate the optimal delay scheme with the largest spectrum efficiency of DBICM for a fixed maximum number of delayed time slots and a given signal-to-noise ratio. When analyzing the capacity of DBICM, we find two important properties: the capacity improvement due to delayed coded bits being mapped to the real and imaginary parts of the transmitted symbols are independent of each other; a pair of delay schemes with delayed coded bits having identical bit-channel capacity lead to equivalent DBICM capacity. Using these two properties, we efficiently optimize the delay scheme for any uniform Gray-QAM systems. Furthermore, these two properties enable efficient LDPC code designs regarding unequal error protection via bit-channel type classifications. Moreover, we use protograph-based extrinsic information transfer charts to jointly optimize degree distributions and channel assignments of LDPC codes and propose a constrained progressive edge growth like algorithm to jointly construct LDPC codes and bit-interleavers for DBICM, taking distinctive bit-channel’s capacity into account. Simulation results demonstrate that the designed LDPC coded DBICM systems significantly outperform LDPC coded BICM systems. [ABSTRACT FROM AUTHOR]

In this paper, we focus on a UAV-assisted cooperative communication system based on simultaneous wireless information and power transfer (SWIPT), where the UAV serves as a relay and its transmission capability is partly powered by radio signal from the source via the time-sharing mechanism. We study the end-to-end cooperative throughput maximization problem by optimizing the UAV's decision profile, power profile and trajectory for both amplify-and-forward (AF) and decode-and-forward (DF) protocols. The problem is decomposed into three optimization subproblems for decision profile, power profile and trajectory, and solved through alternating optimization, by which each of the subproblems is solved with the other two fixed. A binarization algorithm is further proposed to make the decision profile feasible. We show that the proposed solution outperforms not only two SWIPT-based strategies, but also a similar solution from an existing work without consideration for SWIPT. In addition, results indicate that the proposed algorithm performs efficiently in both optimality and convergence. [ABSTRACT FROM AUTHOR]

In the soft-input soft-output Viterbi algorithm (SOVA), the log-likelihood ratio (LLR) of each bit is determined by the minimum metric difference between the ML path and its competitive paths. This paper proposes to trim large metric differences in order to reduce the complexity of SOVA. By trimming the metric differences, only a small number of backtracking operations are carried out, while many LLRs may be omitted as the result of the lack of metric differences. By revealing the relationship among neighboring LLRs, the omitted LLRs are estimated from its neighoring LLRs as well as intrinsic information. The extrinsic information transfer chart analysis demonstrates that the proposed algorithm has similar convergence behavior as the Log-MAP algorithm, if the trimming factor $M$ is moderate. Other analyses verify that our approach provides good LLR quality with only at most $1/M$ backtracking operations of SOVA. Simulation results show that it outperforms SOVA and performs as well as its variants and the Log-MAP algorithm. [ABSTRACT FROM AUTHOR]

This paper presents a new learning algorithm for multitask pattern recognition (MTPR) problems. We consider learning multiple multiclass classification tasks online where no information is ever provided about the task category of a training example. The algorithm thus needs an automated task recognition capability to properly learn the different classification tasks. The learning mode is "online" where training examples for different tasks are mixed in a random fashion and given sequentially one after another. We assume that the classification tasks are related to each other and that both the tasks and their training examples appear in random during "online training." Thus, the learning algorithm has to continually switch from learning one task to another whenever the training examples change to a different task. This also implies that the learning algorithm has to detect task changes automatically and utilize knowledge of previous tasks for learning new tasks fast. The performance of the algorithm is evaluated for ten MTPR problems using five University of California at Irvine (UCI) data sets. The experiments verify that the proposed algorithm can indeed acquire and accumulate task knowledge and that the transfer of knowledge from tasks already learned enhances the speed of knowledge acquisition on new tasks and the final classification accuracy. In addition, the task categorization accuracy is greatly improved for all MTPR problems by introducing the reorganization process even if the presentation order of class training examples is fairly biased. [ABSTRACT FROM AUTHOR]