Search

The traditional method for transformer moisture diagnosis is to establish empirical equations between feature parameters extracted from frequency domain spectroscopy (FDS) and the transformer’s moisture content. However, the established empirical equation may not be applicable to a novel testing environment, resulting in an unreliable evaluation result. In this regard, it is acknowledged that FDS combined with machine learning is more suitable for estimating moisture content in a variety of test environments. Nonetheless, the accuracy of the estimation results obtained using the existing method is limited by the algorithm’s inability to generalize. To address this issue, we propose an AdaBoost algorithm-enhanced back-propagation neural network (BP_AdaBoost). This study creates a database by extracting feature parameters from the FDS that characterize the insulation states of the prepared samples. Then, using the BP_AdaBoost algorithm and the newly constructed database, the moisture estimation models are trained. Finally, the results of the estimation are discussed in terms of laboratory and field transformers. By comparing the proposed BP_AdaBoost algorithm to other intelligence algorithms, it is demonstrated that it not only performs better in generalization, but also maintains a high level of accuracy. [ABSTRACT FROM AUTHOR]

Dirty paper coding (DPC) scheme is the capacity achieving transmission technique in multiuser MIMO downlink channels. As a suboptimal solution to DPC, successive zero-forcing DPC (SZF-DPC) has been proposed recently. The zero-interference constraint in designing the precoding matrices limits the number of supportable users. In this correspondence, we propose three low-complexity suboptimal user scheduling algorithms to exploit the multiuser diversity gain in SZF-DPC as the number of users grows. The first algorithm greedily maximizes the true sum rate. The second algorithm is based on eigenvalues. The third algorithm relies on the diagonal elements of the effective channel matrix since eigenvalues and diagonal entries of a Hermitian matrix have a strong relationship. Simulation results show that the proposed scheduling algorithms can obtain a significant fraction of sum rate of the optimal solution. Furthermore, the performance analysis is provided to prove that the proposed user selection algorithms can achieve the same asymptotic sum rate as that of DPC. [ABSTRACT FROM AUTHOR]

A new dirty paper coding technique that is robust against the gain attack is presented. Such a robustness is obtained by adopting a set of (orthogonal) equienergetic codewords and a correlation-based decoder. Due to the simple structure of orthogonal codes, we developed a simple yet powerful technique to embed the hidden message within the host signal. The proposed technique is an optimal one, in that the embedding distortion is minimized for a given robustness level, where robustness is measured through the maximum pairwise error probability in the presence of an additive Gaussian attack of given strength. The performance of the dirty coding algorithm is further improved by replacing orthogonal with quasi- orthogonal codes, namely, Gold sequences, and by concatenating them with an outer turbo code. To this aim, the inner decoder is modified to produce a soft estimate of the embedded message. Performance analysis is carried out by means of extensive simulations proving the validity of the novel watermarking scheme. [ABSTRACT FROM AUTHOR]

Presents a study which showed how curve and surface representations of fiber network, fiber wall and fiber lumen can be computed using distance transform based algorithms. Motive for analyzing volume images of paper; Uses of the representations; Levels of detail in which the analysis of paper and paper fibers can be divided.

This paper proposes and evaluates two robust sheet tension estimation algorithms based on unwind and rewind variables, respectively. The proper sheet tension estimation is guaranteed by a continuous monitoring of the differences between the actual estimated values and the values predicted from the last calibration of the estimation parameters. The evaluation was performed with the aid of a developed winder emulator that allowed the offline testing in a real-time field environment, including the initial setting of the estimation constants, and evaluation of both four- and six-shipping-roll cycles. The sheet tension estimation results confirm the precise and stable operation of the proposed robust estimation algorithms, in tests conducted with signals from a winder model, and with tests involving actual field signals from an operational winder. [ABSTRACT FROM AUTHOR]

Recently developed monitoring-systems show the need as also the possibilities for online- and offline-onsite-diagnostics. The limit in sensitivity for electrical pd-measurements according to IEC 60270 which is reached using filters for sinusoidal disturbances and compensation for corona impulses is still not satisfactory. The acoustic partial discharge measurement (pd-measurement) is also a well known and reliable method often used by transformer manufacturers in testing. In laboratory setups a gain in sensitivity of the acoustic in comparison to the electrical pd measurements could be established. This is reached by adapting the sensors to the propagation path, a modern but moderately priced acquisition hardware and the introduction of new signal processing algorithms. The developed sophisticated measuring, systems show remarkable results in online acoustic pd-measurements onsite. [ABSTRACT FROM AUTHOR]

Fighting against the pandemic diseases with unique characters requires new sophisticated approaches like the artificial intelligence. This paper develops an artificial intelligence algorithm to produce multi-dimensional policies for controlling and minimizing the pandemic casualties under the limited pharmacological resources. In this respect, a comprehensive parametric model with a priority and age-specific vaccination policy and a variety of non-pharmacological policies are introduced. This parametric model is utilized for constructing an artificial intelligence algorithm by following the exact analogy of the model-based solution. Also, this parametric model is manipulated by the artificial intelligence algorithm to seek for the best multi-dimensional non-pharmacological policies that minimize the future pandemic casualties as desired. The role of the pharmacological and non-pharmacological policies on the uncertain future casualties are extensively addressed on the real data. It is shown that the developed artificial intelligence algorithm is able to produce efficient policies which satisfy the particular optimization targets such as focusing on minimization of the death casualties more than the infected casualties or considering the curfews on the people age over 65 rather than the other non-pharmacological policies. The paper finally analyses a variety of the mutant virus cases and the corresponding non-pharmacological policies aiming to reduce the morbidity and mortality rates. [ABSTRACT FROM AUTHOR]

Fighting against the pandemic diseases with unique characters requires new sophisticated approaches like the artificial intelligence. This paper develops an artificial intelligence algorithm to produce multi-dimensional policies for controlling and minimizing the pandemic casualties under the limited pharmacological resources. In this respect, a comprehensive parametric model with a priority and age-specific vaccination policy and a variety of non-pharmacological policies are introduced. This parametric model is utilized for constructing an artificial intelligence algorithm by following the exact analogy of the model-based solution. Also, this parametric model is manipulated by the artificial intelligence algorithm to seek for the best multi-dimensional non-pharmacological policies that minimize the future pandemic casualties as desired. The role of the pharmacological and non-pharmacological policies on the uncertain future casualties are extensively addressed on the real data. It is shown that the developed artificial intelligence algorithm is able to produce efficient policies which satisfy the particular optimization targets such as focusing on minimization of the death casualties more than the infected casualties or considering the curfews on the people age over 65 rather than the other non-pharmacological policies. The paper finally analyses a variety of the mutant virus cases and the corresponding non-pharmacological policies aiming to reduce the morbidity and mortality rates. [ABSTRACT FROM AUTHOR]

For nearly a decade, quality-related fault detection algorithms have been widely used in industrial systems. However, the majority of these detection strategies rely on static assumptions of the operating environment. In this paper, taking the time series of variables into consideration, a dynamic kernel entropy component regression (DKECR) framework is proposed to address the instability of quality-related fault detection due to the existing dynamic characteristics. Compared with the typical kernel entropy component analysis method, the proposed method constructs the relationship between process states and quality states to further interpret the direct effect on the product taken by the fault. In the proposed approach, process measurements are converted to a lower-dimensional subspace with a specific angular structure that is more comprehensive than traditional subspace approaches. In addition, the angular statistics and their relevant thresholds are exploited to enhance the quality-related fault detection performance. Finally, the proposed method will be compared with three methods by means of a numerical example and two industrial scenarios to demonstrate its practicality and effectiveness. Note to Practitioners—This paper studies a quality-related fault detection problem for the dynamic nonlinear industrial system. Controlling and measuring the quality state is challenging for the high-level monitoring system of the manufacturing process due to the nonlinear dynamic feature in states. This paper proposes a new data-driven method based on the kernel entropy component analysis method to assess the correlation between the quality and fault in the industrial system, reducing unnecessary overhaul and maintenance. Based on the autoregressive moving average exogenous algorithm, the proposed method captures the dynamic interaction between the process states to decrease false alarms. In the experimental section, the DKECR method outperforms the compared approaches, which can provide stable fault detection results. Additionally, the unique angle structure of the proposed method can supply more information for engineers’ monitoring needs. [ABSTRACT FROM AUTHOR]

This paper addresses a UAV path planning problem for a team of cooperating heterogeneous vehicles composed of one unmanned aerial vehicle (UAV) and multiple unmanned ground vehicles (UGVs). The UGVs are used as mobile actuators and scattered in a large area. To achieve multi-UGV communication and collaboration, the UAV, modeled as a Dubins vehicle, serves as a messenger to fly over the effective communication range of all UGVs to relay information. The curvature-constrained path planning of the messenger UAV is formulated as a Dubins Traveling Salesman Problem with Dynamic Neighborhood (DTSPDN) which is a complex optimization problem involving coupled variables and contains dynamic constraints. We design an effective memetic algorithm to find the shortest route that enables the messenger UAV to visit all moving UGVs. This algorithm combines the genetic algorithm procedure, two kinds of local search operators based on gradient search and uniform sampling respectively, and a gradient-based repair operator to repair the solutions violating dynamic constraints. During the evolutionary process, a special phenomenon may occur that changing some decision variables (i.e., visiting sequence and location) may not affect the evaluation function value, but may alter the feasible region of another decision variable (i.e., visiting time) due to the encounter constraint between the UAV and UGV. To track and utilize the change of the feasible region, a transformation procedure is proposed to change one solution to another with less visiting time by analyzing the encounter pattern between UAV and UGV. The computational results on random instances with different scales demonstrate that the proposed approach can effectively generate better curvature-constrained tours to encounter all moving UGVs when compared to other four competitive algorithms in the literature. Note to Practitioners—This paper studies an emerging path planning problem for a UAV which is used to provide communication service for multiple moving UGVs. These UGVs are required to execute tasks (e.g., firefighting, search and rescue) within a large area. Due to their limited communication capabilities, they may be unable to obtain necessary information from other UGVs. The UAV serves as a messenger to fly over the effective communication range of all moving UGVs to relay information. We propose a novel memetic algorithm to efficiently search for the shortest tour that enables the messenger UAV to visit all moving UGVs. The memetic algorithm combines the parallel global search virtue of genetic algorithm with efficient local search procedure to improve the generated tour. A gradient-based repair procedure is also employed to make sure that the planned tour can guide the UAV to sequentially encounter each moving UGV. Simulations exhibit that the proposed approach can effectively generate high-quality tours for messenger UAV to rapidly visit all UGVs, which assists UGVs to achieve collaboration in large area. In future work, the proposed memetic algorithm will be extended to plan tours for multiple messenger UAVs. [ABSTRACT FROM AUTHOR]

This paper proposes an approach to mitigate adverse effects of the fault management of closed/ring grids with high shares of distributed generation (DG). The approach refers to conventional distance protection relays in particular. The rising share of DG, especially in distribution systems, can lead to overloadings and intolerable voltages. Closed-ring structures increase the grid capacity for DG due to more balanced load and voltages profiles. However, malfunctions of protection relays may occur because fault locating and selective fault clearing can be disturbed. This paper presents a distance protection algorithm for feeder relays that complies with the requirements of closed/ring grids with inter/infeeds. The proposed current comparison method (CCM) bases on the comparison of negative/sequence currents. It needs no voltage measurement and remains unaffected from inter/infeeds and fault resistances. Additionally, for relays located at the ring coupler, where the ring can be opened, a coupling relay method (CRM) is proposed. It locates unsymmetrical faults in closed/ring grids with inter/infeeds and enables fast and selective opening of the ring. This helps maintaining reliable power supply for customers in closed rings. Finally, the paper presents a grading strategy reducing the average fault clearing time. Lab tests prove the capability of both proposed algorithms. [ABSTRACT FROM AUTHOR]

As an algorithmic framework, message passing is extremely powerful and has wide applications in the context of different disciplines including communications, coding theory, statistics, signal processing, artificial intelligence and combinatorial optimization. In this paper, we investigate the performance of a message-passing algorithm called min-sum belief propagation (BP) for the vertex-disjoint shortest $k$ -path problem ($k$ -VDSP) on weighted directed graphs, and derive the iterative message-passing update rules. As the main result of this paper, we prove that for a weighted directed graph $G$ of order $n$ , BP algorithm converges to the unique optimal solution of $k$ -VDSP on $G$ within $O(n^{2}w_{max})$ iterations, provided that the weight $w_{e}$ is nonnegative integral for each arc $e\in E(G)$ , where $w_{max}=\max \{w_{e}: e\in E(G)\}$. To the best of our knowledge, this is the first instance where BP algorithm is proved correct for NP-hard problems. Additionally, we establish the extensions of $k$ -VDSP to the case of multiple sources or sinks. [ABSTRACT FROM AUTHOR]

Unavoidably, the controlsystem of any permanent magnet synchronous motor (PMSM) is subjected to perturbations, e.g., motor nonidealities and inverter nonlinearities. To reject these perturbations, a new super-twisting (ST) control variant, called speed adaptive super-twisting (S-AST) control, is proposed in this paper. In the S-AST control, a proportional-integral (PI) and a ST controllers are merged using an adaptive law that is based on the motor speed measurement. This is done to reduce the chattering problems that the standard ST control presents. In addition, a mathematical design for the S-AST control is proposed, where the relationship between the chattering amplitude, the switching frequency and the system perturbations is shown. The main contribution in this paper is the application of the S-AST controller to reduce the total harmonic distortion (THDi) of the PMSM currents. By comparing the S-AST control against PI control, the THDi is reduced from 9.9% to 1.27%, in simulation, and the THDi is reduced from 22.79% to 1.56%, experimentally. These results demonstrate how the S-AST control is an excellent alternative to improve the waveform of the PMSM currents. [ABSTRACT FROM AUTHOR]

The ongoing coronavirus disease 2019 (COVID-19) is a pandemic causing millions of deaths, devastating social and economic disruptions. Testing individuals for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the pathogen of COVID-19, is critical for mitigating and containing COVID-19. Many countries are implementing group testing strategies against COVID-19 to improve testing capacity and efficiency while saving required workloads and consumables. A group of individuals’ nasopharyngeal/oropharyngeal (NP/OP) swab samples is mixed to conduct one test. However, existing group testing methods neglect the fact that mixing samples usually leads to substantial dilution of viral ribonucleic acid (RNA) of SARS-CoV-2, which seriously impacts the sensitivity of tests. In this paper, we aim to screen individuals infected with COVID-19 with as few tests as possible, under the premise that the sensitivity of tests is high enough. To achieve this goal, we propose an Adaptive Group Testing (AdaGT) method. By collecting information on the number of positive and negative samples that have been identified during the screening process, the AdaGT method can estimate the ratio of positive samples in real-time. Based on this ratio, the AdaGT algorithm adjusts its testing strategy adaptively between an individual testing strategy and a group testing strategy. The group size of the group testing strategy is carefully selected to guarantee that the sensitivity of each test is higher than a predetermined threshold and that this group contains at most one positive sample on average. Theoretical performance analysis on the AdaGT algorithm is provided and then validated in experiments. Experimental results also show that the AdaGT algorithm outperforms existing methods in terms of efficiency and sensitivity. Note to Practitioners—Real-time reverse transcription-polymerase chain reaction (rRT-PCR) tests provide scope for automation and are one of the most widely used laboratory methods for detecting the SARS-CoV-2 virus. This paper is motivated by the following challenges: (1) Many countries are experiencing an acute shortage of professionals and consumables for conducting rRT-PCR tests; (2) Group sizes of existing group testing methods against COVID-19 may not be optimal, which adversely impacts the efficiency of the screening of the SARS-CoV-2 virus; (3) Existing group testing methods do not consider the fact that the sensitivity of rRT-PCR tests usually decreases with the group size. The objective of this paper is to improve the efficiency and sensitivity of large-scale screening against COVID-19. For achieving this goal, we propose an Adaptive Group Testing (AdaGT) algorithm, which has the following advantages: (1) It can improve the efficiency for screening the SARS-CoV-2 virus, mainly by adaptively adjusting its testing strategy between an individual testing strategy and a group testing strategy based upon an estimated ratio of positive samples during the screening process; (2) It can guarantee a high sensitivity of the rRT-PCR tests by determining the group sizes of the group testing strategy based upon some constraints; (3) We derive an appropriate threshold for the estimated ratio of positive samples such that the AdaGT algorithm can achieve a minimum average number of rRT-PCR tests and can be directly employed in practical applications. [ABSTRACT FROM AUTHOR]

The problem of range estimation based on noisy measurements with phase ambiguity can be solved using signals across multiple frequencies by existing algorithms based on either the Chinese Remainder Theorem or lattice theory. The performances of these algorithms are constrained by the trade-off between SNR of measurements and required estimation accuracy. In this paper, we firstly propose an algorithm to find a set of wavelengths satisfying the conditions to apply the closed-form lattice algorithm from a given interval. Then we propose an enhanced lattice algorithm for range estimation based on existing lattice approaches. In the conventional lattice algorithm, the selection of an integer vector by the estimator often fails to be the ground truth because of noise. As a result, the true value can be a neighbouring lattice point of the estimated point where neighbours are defined in terms of a distance depending on the noise characteristics. In this paper, all neighbouring lattice points of the estimated point obtained by a conventional lattice algorithm are regarded as candidates for the new estimate. Then an efficient estimator is presented to choose one of those candidates to be the new estimate. The performance of the proposed algorithm, i.e. the successful probability of reconstruction, is derived mathematically. Additionally, a computation-reduced algorithm is presented to reduce the overhead of computation. The calculated probability and simulation results demonstrate the efficiency of the proposed algorithm. [ABSTRACT FROM AUTHOR]

The Unlimited Sensing Framework (USF) was recently introduced to overcome the sensor saturation bottleneck in conventional digital acquisition systems. At its core, the USF converts a continuous-time high-dynamic-range (HDR) signal into folded, low-dynamic-range, modulo samples and allows the recovery of the HDR signal via algorithmic unfolding. In hardware, however, implementing ideal modulo folding requires careful calibration, analog design and high precision. At the interface of theory and practice, this paper explores a computational sampling strategy that relaxes strict hardware requirements via a novel, mathematically guaranteed reconstruction. We start with a generalized model for USF with two new parameters modeling hysteresis and folding transients in addition to the modulo threshold. Hysteresis accounts for mismatches between the reset threshold and the amplitude displacement at the folding time and the folding transient is a continuous transition period in the implementation of a reset. Both these effects are motivated by our hardware experiments and also occur in previous, domain-specific applications. We show that hysteresis is beneficial for USF and leverage it to derive the first recovery guarantees in the context of our generalized USF model for a certain sampling rate regime. Additionally, we show how the sampling rate requirement can be greatly reduced via a direct generalization of the proposed recovery. Our theoretical work is corroborated by hardware experiments with a hysteresis enabled, modulo ADC testbed comprising off-the-shelf electronic components. Thus, by capitalizing on a collaboration between hardware and algorithms, our paper enables an end-to-end pipeline for HDR sampling allowing more flexible hardware implementations. [ABSTRACT FROM AUTHOR]

This paper proposes a novel bit loading algorithm to multicarrier non-orthogonal multiple access (NOMA) systems to maximize the system total throughput while satisfying the users’ individual quality of service (QoS) constraints. Although bit loading is generally a non-deterministic polynomial-time (NP)-hard problem, even for orthogonal multiple access (OMA), the mutual interference between the users, and the dependence of power coefficients and modulation orders are additional challenges that add substantial complexity to the optimization problem. Therefore, in this paper, we propose an efficient bit loading algorithm for multicarrier NOMA systems and compare the complexity and throughput with a corresponding OMA system. The obtained results show that for the case of NOMA, bit loading provides an additional degree of freedom that allows non-uniform spectrum sharing among the users. In particular scenarios, the system may experience hybrid modes of operation, where the system switches between NOMA and OMA. The obtained numerical results show that NOMA can outperform OMA by 100% in terms of spectral efficiency, for a two-user scenario. The complexity of the loading process for NOMA is noticeably higher than OMA, which is due to the high complexity associated with the bit error rate (BER) computation in the case of NOMA. [ABSTRACT FROM AUTHOR]

HVDC grid protection with adequate speed and reliability is required to minimise the impact of DC faults. In particular, fast breaker failure backup protection algorithms are needed to meet the expected reliability requirements of HVDC grids. In this paper, existing breaker failure backup protection algorithms are shown inadequate to detect partial failures like a single module failure of breakers with a modular structure. This paper proposes a backup protection algorithm which rapidly detects a DC breaker failure based on estimating the counter-voltage created by the energy absorption branch during an interruption. The performance of the proposed algorithm is evaluated using a four-terminal test network with both hybrid and mechanical DC breaker technologies. The simulation results show that the proposed algorithm is able to quickly detect both complete and partial failures of the two breaker technologies even considering measurement errors, noise and ageing of the energy absorption components. [ABSTRACT FROM AUTHOR]

The integration of the variable renewable energies makes the operation conditions of the power system ever-changeable. Consequently, the power system operational reliability evaluation is increasingly important. This paper introduces the concept of decision-dependent uncertainty (DDU) in the operational reliability evaluation. Unlike the exogenous uncertainties, DDU reveals that the decisions of the system operation could significantly affect the resolution of the uncertainties which influence the reliability metrics. In this paper, the proposed DDU modeling method links the device reliability indices, i.e., the forced outage rate, and the operational-decision variables. The impacts of DDU on operational reliability are analyzed based on a reliability-constrained stochastic unit commitment (UC) model. An adaptive reliability improvement UC (ARIUC) algorithm is proposed to efficiently solve the problem. Case studies underline the necessity of considering DDU in power system operational reliability evaluations. [ABSTRACT FROM AUTHOR]

This paper presents a distributionally robust network-constrained unit commitment (DR-NCUC) model considering AC network modeling and uncertainties of demands and renewable productions. The proposed model characterizes uncertain parameters using a data-driven ambiguity set constructed by training samples. The non-convex AC power flow equations are approximated by convex quadratic and McCormick relaxations. Since the proposed min-max-min DR-NCUC problem cannot be solved directly by available solvers, a new decomposition algorithm with proof of convergence is reported in this paper. The master problem of this algorithm is solved using both primal and dual cuts, while the max-min sub-problem is solved using the primal-dual hybrid gradient method, obviating the need for using duality theory. Also, an active set strategy is proposed to enhance the tractability of the decomposition algorithm by ignoring the subset of inactive constraints. The proposed model is applied to a 6-bus test system and the IEEE 118-bus test system under different conditions. These case studies illustrate the performance of the proposed DR-NCUC model to characterize uncertainties and the superiority of the proposed decomposition algorithm over other decomposition approaches using either primal or dual cuts. [ABSTRACT FROM AUTHOR]

Co-simulation of heterogeneous systems allows for in-depth analysis of various aspects of power systems’ operation while staying within the environments of the simulation tools that are best fit to represent their respective domains. Equipped with a proprietary co-simulation platform, the paper focuses on the issue of power-conjugate coupling between parts of power grids modeled in transient stability and electromagnetic transient simulation tools. The problems of co-simulation stability and precision in presence of delays are tackled by means of designing a proper coupling interface. It is shown that two established interface methods – the V-I method and the Transmission Line Interface – are special cases of a generalized interface framework proposed in the paper. Moreover, a new interface algorithm is described by parametrizing the generalized framework. Analytical tools are also formulated to aid in the analysis of interface stability and precision via the concepts of passivity and transparency. Simulation results of benchmark systems of various complexity demonstrate the application of the developed power coupling interface. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the convergence speed of the Arimoto-Blahut algorithm. For many channel matrices, the convergence speed is exponential, but for some channel matrices it is slower than exponential. By analyzing the Taylor expansion of the defining function of the Arimoto-Blahut algorithm, we will make the conditions clear for the exponential or slower convergence. The analysis of the slow convergence in this paper is new. Based on this analysis, we will compare the convergence speeds of the Arimoto-Blahut algorithm numerically with the values obtained in our theorems for several channel matrices. The purpose of this paper is to obtain a complete understanding of the convergence speed of the Arimoto-Blahut algorithm. [ABSTRACT FROM AUTHOR]

Flexible DC distribution networks have been widely developed because of their advantages of high efficiency, low cost, and easy access to renewable energy. However, as distribution networks have more ends than the two-terminal transmission line, it is more challenging to protect them and locate their faults. Therefore, this paper proposes a modified T-source circuit breaker to protect against DC faults. Based on the proposed circuit breaker, an integral fault location method using double-terminal asynchronous data is proposed. The accuracy of the algorithm is not affected by the fault resistance. There are no differential terms in the algorithm, which greatly reduces the sensitivity to noise. The integral algorithm can remain steady when the voltage and current are zero in oscillation and attenuation periods. This constitutes the main contribution of this paper. Finally, it is verified by simulation and experiment that the proposed circuit breaker can isolate the power source within a short time in the typical DC distribution network. Under a noise of 30 dB for simulation, the location error of the proposed algorithm is <0.4% when the fault resistance is 0.5 Ω–500 Ω. [ABSTRACT FROM AUTHOR]

Adversarial attacks have been extensively studied in recent years since they can identify the vulnerability of deep learning models before deployed. In this paper, we consider the black-box adversarial setting, where the adversary needs to craft adversarial examples without access to the gradients of a target model. Previous methods attempted to approximate the true gradient either by using the transfer gradient of a surrogate white-box model or based on the feedback of model queries. However, the existing methods inevitably suffer from low attack success rates or poor query efficiency since it is difficult to estimate the gradient in a high-dimensional input space with limited information. To address these problems and improve black-box attacks, we propose two prior-guided random gradient-free (PRGF) algorithms based on biased sampling and gradient averaging, respectively. Our methods can take the advantage of a transfer-based prior given by the gradient of a surrogate model and the query information simultaneously. Through theoretical analyses, the transfer-based prior is appropriately integrated with model queries by an optimal coefficient in each method. Extensive experiments demonstrate that, in comparison with the alternative state-of-the-arts, both of our methods require much fewer queries to attack black-box models with higher success rates. [ABSTRACT FROM AUTHOR]

Adversarial attacks have been extensively studied in recent years since they can identify the vulnerability of deep learning models before deployed. In this paper, we consider the black-box adversarial setting, where the adversary needs to craft adversarial examples without access to the gradients of a target model. Previous methods attempted to approximate the true gradient either by using the transfer gradient of a surrogate white-box model or based on the feedback of model queries. However, the existing methods inevitably suffer from low attack success rates or poor query efficiency since it is difficult to estimate the gradient in a high-dimensional input space with limited information. To address these problems and improve black-box attacks, we propose two prior-guided random gradient-free (PRGF) algorithms based on biased sampling and gradient averaging, respectively. Our methods can take the advantage of a transfer-based prior given by the gradient of a surrogate model and the query information simultaneously. Through theoretical analyses, the transfer-based prior is appropriately integrated with model queries by an optimal coefficient in each method. Extensive experiments demonstrate that, in comparison with the alternative state-of-the-arts, both of our methods require much fewer queries to attack black-box models with higher success rates. [ABSTRACT FROM AUTHOR]

Long short-term memory (LSTM) is a type of powerful deep neural network that has been widely used in many sequence analysis and modeling applications. However, the large model size problem of LSTM networks make their practical deployment still very challenging, especially for the video recognition tasks that require high-dimensional input data. Aiming to overcome this limitation and fully unlock the potentials of LSTM models, in this paper we propose to perform algorithm and hardware co-design towards high-performance energy-efficient LSTM networks. At algorithm level, we propose to develop fully decomposed hierarchical Tucker (FDHT) structure-based LSTM, namely FDHT-LSTM, which enjoys ultra-low model complexity while still achieving high accuracy. In order to fully reap such attractive algorithmic benefit, we further develop the corresponding customized hardware architecture to support the efficient execution of the proposed FDHT-LSTM model. With the delicate design of memory access scheme, the complicated matrix transformation can be efficiently supported by the underlying hardware without any access conflict in an on-the-fly way. Our evaluation results show that both the proposed ultra-compact FDHT-LSTM models and the corresponding hardware accelerator achieve very high performance. Compared with the state-of-the-art compressed LSTM models, FDHT-LSTM enjoys both order-of-magnitude reduction (more than $1000 \times$ 1000 × ) in model size and significant accuracy improvement (0.6% to 12.7%) across different video recognition datasets. Meanwhile, compared with the state-of-the-art tensor decomposed model-oriented hardware TIE, our proposed FDHT-LSTM architecture achieve $2.5\times$ 2. 5 × , $1.46\times$ 1. 46 × and $2.41\times$ 2. 41 × increase in throughput, area efficiency and energy efficiency, respectively on LSTM-Youtube workload. For LSTM-UCF workload, our proposed design also outperforms TIE with $1.9\times$ 1. 9 × higher throughput, $1.83\times$ 1. 83 × higher energy efficiency and comparable area efficiency. [ABSTRACT FROM AUTHOR]

Blockchain technologies can enable secure computing environments among mistrusting parties. Permissioned blockchains are particularly enlightened by companies, enterprises, and government agencies due to their efficiency, customizability, and governance-friendly features. Obviously, seamlessly fusing blockchain and cloud computing can significantly benefit permissioned blockchains; nevertheless, most blockchains implemented on clouds are originally designed for loosely-coupled networks where nodes communicate asynchronously, failing to take advantages of the closely-coupled nature of cloud servers. In this paper, we propose an innovative cloud-oriented blockchain – CloudChain, which is a modularized three-layer system composed of the network layer, consensus layer, and blockchain layer. CloudChain is based on a shared-memory model where nodes communicate synchronously by direct memory accesses. We realize the shared-memory model with the Remote Direct Memory Access technology, based on which we propose a shared-memory consensus algorithm to ensure presistence and liveness, the two crucial blockchain security properties countering Byzantine nodes. We also implement a CloudChain prototype based on a RoCEv2-based testbed to experimentally validate our design, and the results verify the feasibility and efficiency of CloudChain. [ABSTRACT FROM AUTHOR]

A flat-field correction method is proposed for multiple measured hyperspectral microscopy imaging in this paper. As the most crucial preprocessing process in quantitative microscopic analysis, flat-field correction solves the uneven illumination caused by vignetting in microscopic images, and guarantees the precision of spatial and spectral information in hyperspectral microscopic imaging. In order to carry out flat-field correction and extract uneven illumination among groups of hyperspectral microscopic data containing hundreds of bands simultaneously, two properties of vignetting have been exploited: i) low-rank property is reflected by little information contained in vignetting; ii) local smoothness can be observed as a gradual change in brightness of vignetting, which is typically equivalent to the sparseness in spatial frequency domain. Combining the two properties above, a novel Low Rank Smooth Flat-field Correction (LRSFC) model modified from common orthogonal basis extraction is proposed, while an optimization is solved based on alternating direction multiplier method (ADMM), obtaining a unique flat-field term with low-rank and smooth properties. Qualitative and quantitative experimental assessments indicate that LRSFC does not add extra cell texture to the extracted flat-field term, whose performance appears prior to other state-of-the-art flat-field correction methods. [ABSTRACT FROM AUTHOR]

Non-Line-of-Sight (NLOS) imaging reconstructs occluded scenes based on indirect diffuse reflections. The computational complexity and memory consumption of existing NLOS reconstruction algorithms make them challenging to be implemented in real-time. This paper presents a fast and memory-efficient phasor field-diffraction-based NLOS reconstruction algorithm. In the proposed algorithm, the radial property of the Rayleigh Sommerfeld diffraction (RSD) kernels along with the linear property of Fourier transform are utilized to reconstruct the Fourier domain representations of RSD kernels using a set of kernel bases. Moreover, memory consumption is further reduced by sampling the kernel bases in a radius direction and constructing them during the run-time. According to the analysis, the memory efficiency can be improved by as much as $\mathbf {220}\times$ 220 × . Experimental results show that compared with the original RSD algorithm, the reconstruction time of the proposed algorithm is significantly reduced with little impact on the final imaging quality. [ABSTRACT FROM AUTHOR]

The Area under the ROC curve (AUC) is a well-known ranking metric for problems such as imbalanced learning and recommender systems. The vast majority of existing AUC-optimization-based machine learning methods only focus on binary-class cases, while leaving the multiclass cases unconsidered. In this paper, we start an early trial to consider the problem of learning multiclass scoring functions via optimizing multiclass AUC metrics. Our foundation is based on the M metric, which is a well-known multiclass extension of AUC. We first pay a revisit to this metric, showing that it could eliminate the imbalance issue from the minority class pairs. Motivated by this, we propose an empirical surrogate risk minimization framework to approximately optimize the M metric. Theoretically, we show that: (i) optimizing most of the popular differentiable surrogate losses suffices to reach the Bayes optimal scoring function asymptotically; (ii) the training framework enjoys an imbalance-aware generalization error bound, which pays more attention to the bottleneck samples of minority classes compared with the traditional $O(\sqrt{1/N})$ O (1 / N) result. Practically, to deal with the low scalability of the computational operations, we propose acceleration methods for three popular surrogate loss functions, including the exponential loss, squared loss, and hinge loss, to speed up loss and gradient evaluations. Finally, experimental results on 11 real-world datasets demonstrate the effectiveness of our proposed framework. The code is now available at https://github.com/joshuaas/Learning-with-Multiclass-AUC-Theory-and-Algorithms. [ABSTRACT FROM AUTHOR]

High-performance multicast packet switching technologies are evolving to meet the growing demand for scalability on the Internet and datacenters, etc. Implementing a high-performance switch/router relies on a polynomial-time group membership query algorithm within the Packet Forwarding Engines (PFEs) to determine whether a packet is forwarded through an egress. Among these, Bloom filter (BF)-based and Residue Number System (RNS)-based are being considered as two representatives of the membership query algorithms. However, both approaches suffer from some fatal weaknesses such as false-positive probability and time inefficiencies, especially for a carrier-grade PFE with high port-density features. According to similar properties of the RNS, we propose a simplified forwarding algorithm in this paper, named Per-Port Prime Filter Array (P3FA). The simulation results indicate that the P3FA can significantly improve space efficiencies under specific lower egress-diversities conditions. Under the same space constraints, P3FA improves multicast and unicast time efficiency by 1 to 4 orders of magnitude in the port-density 16–1024 range compared to previous works. Although it comes at the expense of hardware cost, it is still acceptable compared to recently improved previous work. [ABSTRACT FROM AUTHOR]

Gossip protocols are popular methods for average consensus problems in distributed computing. We prove new convergence guarantees for a variety of such protocols, including path, clique, and synchronous pairwise gossip. These arise by exploiting the connection between these protocols and the block randomized Kaczmarz method for solving linear systems. Moreover, we extend existing convergence results for block randomized Kaczmarz to allow for a more general choice of blocks, rank-deficient systems, and provide a tighter convergence rate guarantee. Previous results for block randomized Kaczmarz assumed blocks formed a paving of the systems; our analysis, contrary to the title of our paper, generalizes to a broader class of blocks that we call coverings. We furthermore apply this analysis to inconsistent consensus models and obtain similar guarantees. An extensive empirical analysis of these methods is provided for a variety of synthetic and real networks. [ABSTRACT FROM AUTHOR]

This paper studies distributed algorithms for (strongly convex) composite optimization problems over mesh networks, subject to quantized communications. Instead of focusing on a specific algorithmic design, a black-box model is proposed, casting linearly convergent distributed algorithms in the form of fixed-point iterates. The algorithmic model is equipped with a novel random or deterministic Biased Compression (BC) rule on the quantizer design, and a new Adaptive encoding Non-uniform Quantizer (ANQ) coupled with a communication-efficient encoding scheme, which implements the BC-rule using a finite number of bits (below machine precision). This fills a gap existing in most state-of-the-art quantization schemes, such as those based on the popular compression rule, which rely on communication of some scalar signals with negligible quantization error (in practice quantized at the machine precision). A unified communication complexity analysis is developed for the black-box model, determining the average number of bits required to reach a solution of the optimization problem within a target accuracy. It is shown that the proposed BC-rule preserves linear convergence of the unquantized algorithms, and a trade-off between convergence rate and communication cost under ANQ-based quantization is characterized. Numerical results validate our theoretical findings and show that distributed algorithms equipped with the proposed ANQ have more favorable communication cost than algorithms using state-of-the-art quantization rules. [ABSTRACT FROM AUTHOR]

A human contact network (HCN) consists of individuals moving around and interacting with each other. In HCN, it is essential to detect malicious users who break the data delivery through terminating the data delivery or tampering with the data. Since malicious users will pay more but gain less when breaking the data delivery of opportunistic contacts, we focus on the non-opportunistic contacts that occur more frequently and stably. It is observed that people contact with each other more frequently if they have more social features in common. In this paper, we build up topology structure for HCN based on social features, and propose a graph theoretical comparison detection model to perform malicious users detection. Then we present an adaptive detection scheme based on Hamiltonian cycle decomposition. Also, we define comparison-0-string and comparison-1-string to improve the detection efficiency. Moreover, we perform scenario simulations on real data to realize the detected process of malicious users. Experiments show that, when the number of malicious users is bounded by the dimension of HCN, our scheme has a detection rate of 100% with both false positive rate and false negative rate being 0%, and the running cost is also very low when compared to baseline approaches. When the number of malicious users exceeds the bound, the detection rate of our scheme decreases slowly, while the false positive rate and false negative rate increase slowly, but they are still better than the baseline approaches. [ABSTRACT FROM AUTHOR]

As an emulous alternative to deep neural networks, Deep Forest emerges with features like low complexity, fewer hyper-parameters, and good robustness, which are predominantly desired in distributed computing applications and ecosystems. Recently, an efficient distributed Deep Forest system, named ForestLayer, was proposed, designing a fine-grained sub-Forest-based task-parallel algorithm to improve the parallel computing efficiency of Deep Forest. However, the sub-Forest splitting of ForestLayer is static and one-off without adaptability to the computing environment, nevertheless, the size of splitting granularity has a significant impact on the system performance. To further improve the computing efficiency and scalability of the distributed Deep Forest, in this paper, we propose a novel distributed Deep Forest algorithm, named BLB-gcForest (Bag of Little Bootstraps-gcForest), which augments the gcForest (multi-Grained Cascade Forest) approach for constructing Deep Forest. BLB-gcForest carries out parallel computation for each tree in sub-Forests at a finer parallel granularity and integrates with the Bag of Little Bootstraps (BLB) mechanism to reduce massive transmitted feature instances for Cascade Forest Layers, utterly improving both computation efficiency and communication efficiency. Moreover, to solve the problem of the forest splitting granularity, we further design an adaptive sub-Forest splitting algorithm to ensure the maximum resource utilization for parallel computation of each sub-Forest. Experimental results on four well-known large-scale datasets, namely YEAST, LETTER, MNIST, CIFAR10, show that the training efficiency of BLB-gcForest achieves up to 20.3x and 1.64x speedups compared with the state-of-the-art gcForest and ForestLayer, respectively while guaranteeing higher accuracy and better robustness [ABSTRACT FROM AUTHOR]

Tensor fields are useful for modeling the structure of biological tissues. The challenge to measure tensor fields involves acquiring sufficient data of scalar measurements that are physically achievable and reconstructing tensors from as few projections as possible for efficient applications in medical imaging. In this paper, we present a filtered back-projection algorithm for the reconstruction of a symmetric second-rank tensor field from directional X-ray projections about three axes. The tensor field is decomposed into a solenoidal and irrotational component, each of three unknowns. Using the Fourier projection theorem, a filtered back-projection algorithm is derived to reconstruct the solenoidal and irrotational components from projections acquired around three axes. A simple illustrative phantom consisting of two spherical shells and a 3D digital cardiac diffusion image obtained from diffusion tensor MRI of an excised human heart are used to simulate directional X-ray projections. The simulations validate the mathematical derivations and demonstrate reasonable noise properties of the algorithm. The decomposition of the tensor field into solenoidal and irrotational components provides insight into the development of algorithms for reconstructing tensor fields with sufficient samples in terms of the type of directional projections and the necessary orbits for the acquisition of the projections of the tensor field. [ABSTRACT FROM AUTHOR]

We consider the reconstruction problem of video snapshot compressive imaging (SCI), which captures high-speed videos using a low-speed 2D sensor (detector). The underlying principle of SCI is to modulate sequential high-speed frames with different masks and then these encoded frames are integrated into a snapshot on the sensor and thus the sensor can be of low-speed. On one hand, video SCI enjoys the advantages of low-bandwidth, low-power and low-cost. On the other hand, applying SCI to large-scale problems (HD or UHD videos) in our daily life is still challenging and one of the bottlenecks lies in the reconstruction algorithm. Existing algorithms are either too slow (iterative optimization algorithms) or not flexible to the encoding process (deep learning based end-to-end networks). In this paper, we develop fast and flexible algorithms for SCI based on the plug-and-play (PnP) framework. In addition to the PnP-ADMM method, we further propose the PnP-GAP (generalized alternating projection) algorithm with a lower computational workload. We first employ the image deep denoising priors to show that PnP can recover a UHD color video with 30 frames from a snapshot measurement. Since videos have strong temporal correlation, by employing the video deep denoising priors, we achieve a significant improvement in the results. Furthermore, we extend the proposed PnP algorithms to the color SCI system using mosaic sensors, where each pixel only captures the red, green or blue channels. A joint reconstruction and demosaicing paradigm is developed for flexible and high quality reconstruction of color video SCI systems. Extensive results on both simulation and real datasets verify the superiority of our proposed algorithm. [ABSTRACT FROM AUTHOR]

As pairwise ranking becomes broadly employed for elections, sports competitions, recommendation, information retrieval and so on, attackers have strong motivation and incentives to manipulate or disrupt the ranking list. They could inject malicious comparisons into the training data to fool the target ranking algorithm. Such a technique is called “poisoning attack” in regression and classification tasks. In this paper, to the best of our knowledge, we initiate the first systematic investigation of data poisoning attack on the pairwise ranking algorithms, which can be generally formalized as the dynamic and static games between the ranker and the attacker, and can be modeled as certain kinds of integer programming problems mathematically. To break the computational hurdle of the underlying integer programming problems, we reformulate them into the distributionally robust optimization (DRO) problems, which are computational tractable. Based on such DRO formulations, we propose two efficient poisoning attack algorithms and establish the associated theoretical guarantees including the existence of Nash equilibrium and the generalization ability bounds. The effectiveness of the suggested poisoning attack strategies is demonstrated by a series of toy simulations and several real data experiments. These experimental results show that the proposed methods can significantly reduce the performance of the ranker in the sense that the correlation between the true ranking list and the aggregated results with toxic data can be decreased dramatically. [ABSTRACT FROM AUTHOR]

In real-world applications, it is important for machine learning algorithms to be robust against data outliers or corruptions. In this paper, we focus on improving the robustness of a large class of learning algorithms that are formulated as low-rank semi-definite programming (SDP) problems. Traditional formulations use the square loss, which is notorious for being sensitive to outliers. We propose to replace this with more robust noise models, including the $\ell _1$ ℓ 1 -loss and other nonconvex losses. However, the resultant optimization problem becomes difficult as the objective is no longer convex or smooth. To alleviate this problem, we design an efficient algorithm based on majorization-minimization. The crux is on constructing a good optimization surrogate, and we show that this surrogate can be efficiently obtained by the alternating direction method of multipliers (ADMM). By properly monitoring ADMM's convergence, the proposed algorithm is empirically efficient and also theoretically guaranteed to converge to a critical point. Extensive experiments are performed on four machine learning applications using both synthetic and real-world data sets. Results show that the proposed algorithm is not only fast but also has better performance than the state-of-the-arts. [ABSTRACT FROM AUTHOR]

Data deduplication saves storage space by identifying and removing repeats in the data stream. Compared with traditional compression methods, data deduplication schemes are more computationally efficient and are thus widely used in large scale storage systems. In this paper, we provide an information-theoretic analysis of the performance of deduplication algorithms on data streams in which repeats are not exact. We introduce a source model in which probabilistic substitutions are considered. More precisely, each symbol in a repeated string is substituted with a given edit probability. Deduplication algorithms in both the fixed-length scheme and the variable-length scheme are studied. The fixed-length deduplication algorithm is shown to be unsuitable for the proposed source model as it does not take into account the edit probability. Two modifications are proposed and shown to have performances within a constant factor of optimal for a specific class of source models with the knowledge of model parameters. We also study the conventional variable-length deduplication algorithm and show that as source entropy becomes smaller, the size of the compressed string vanishes relative to the length of the uncompressed string, leading to high compression ratios. [ABSTRACT FROM AUTHOR]

Intelligent metasurfaces to create smart electromagnetic environments have attracted a surge of interest. The multiscale property of metasurfaces results in a huge computational challenge, further hindering their engineering development. Our previous paper has developed a fast finite difference time domain (FDTD) algorithm for patchlike metasurfaces analysis using the surface susceptibility model (SSM). This study extends that to efficient fishnetlike metasurfaces analysis using the surface porosity model (SPM), a useful complement to SSM. We introduce the SPM to FDTD, replacing brute force simulations, to accelerate fishnetlike metasurfaces analysis. At last, we conduct a series of numerical experiments, demonstrating that the proposed FDTD-SPM algorithm greatly reduces the number of computational meshing lattices and the consumed time. [ABSTRACT FROM AUTHOR]

Flexible block partition and newly adopted intra coding tools bring significant performance improvement for next generation video coding, and meanwhile introduce non-negligible encoding complexity increment. This paper presents a scalable intra coding optimization (SICO) scheme for the third generation of audio video coding standard (AVS3). The complexity distribution and inheriting relationship among different partitioning, as well as intra prediction modes, are systematically analyzed. Subsequently, low-complexity algorithms are proposed, which could early exclude unlikely coding modes safely. In particular, a data-driven binary classifier is elegantly trained for the determination of coding unit partitioning. Moreover, the preliminary coding information can be exhaustively utilized for the mode decision in a low-cost manner. The proposed method provides scalable intra coding optimizing solutions, which is eligible to cater to various application scenarios. Experimental results show that the proposed method could achieve a wide range of encoding complexity reduction from 18% to 76% with moderate compression performance loss. One implementation of the proposed method has been adopted to the AVS3 reference software. [ABSTRACT FROM AUTHOR]

This paper investigates the stochastic optimization problem focusing on developing scalable parallel algorithms for deep learning tasks. Our solution involves a reformation of the objective function for stochastic optimization in neural network models, along with a novel parallel computing strategy, coined the weighted aggregating stochastic gradient descent (WASGD). Following a theoretical analysis on the characteristics of the new objective function, WASGD introduces a decentralized weighted aggregating scheme based on the performance of local workers. Without any center variable, the new method automatically gauges the importance of local workers and accepts them by their contributions. Furthermore, we have developed an enhanced version of the method, WASGD+, by (1) implementing a designed sample order and (2) upgrading the weight evaluation function. To validate the new method, we benchmark our pipeline against several popular algorithms including the state-of-the-art deep neural network classifier training techniques (e.g., elastic averaging SGD). Comprehensive validation studies have been conducted on four classic datasets: CIFAR-100, CIFAR-10, Fashion-MNIST, and MNIST. Subsequent results have firmly validated the superiority of the WASGD scheme in accelerating the training of deep architecture. Better still, the enhanced version, WASGD+, is shown to be a significant improvement over its prototype. [ABSTRACT FROM AUTHOR]