Search

In this paper, three dc/dc ladder multilevel converters are compared. The first one is the classical ladder topology and the two other topologies presented are based on the classical one. A mathematical calculation of the output resistance and the gain of the converter as a function of the number of levels is carried out for the three topologies in order to estimate the voltage drop due to the output current. These calculations are validated with simulations and experimental results. Finally, the behavior of the three topologies is compared through experimental tests. Results show higher performance for the presented converters compared to the classical ladder. [ABSTRACT FROM AUTHOR]

The matrix converter (MC) is arousing considerable attention as an alternative for conventional ac/ac converters due to the advantages it offers. However, the control and modulation of this converter is complex. This, together with the fact that the MC usually operates at high modulation frequencies, makes the computational load of the platform to be simulated excessively high. All this makes the simulation time of models including the MC excessively long, even more so when both the transient and steady state of the system must be analyzed. This paper presents a new MC simulation technique called Switching State Matrix Averaging (SSMA). Although this is a fixed-step technique, a long simulation step can be used without forfeiting the accuracy of an ideal variable-step simulation. Likewise, the SSMA drastically speeds up the simulation, reducing the amount of required resources and the tuning time of the complex platforms in which the MC is used. A series of simulations has been performed in order to verify the proposed method. Moreover, a comparison between experimental and simulation results has been made, demonstrating the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

In this paper, a new topology of a cascaded multilevel converter is proposed. The proposed topology is based on a cascaded connection of single-phase submultilevel converter units and full-bridge converters. Compared to the conventional multilevel converter, the number of dc voltage sources, switches, installation area, and converter cost is significantly reduced as the number of voltage steps increases. In order to calculate the magnitudes of the required dc voltage sources, three methods are proposed. Then, the structure of the proposed topology is optimized in order to utilize a minimum number of switches and dc voltage sources, and produce a high number of output voltage steps. The operation and performance of the proposed multilevel converter is verified by simulation results and compared with experimental results of a single-phase 49-level converter, too. [ABSTRACT FROM AUTHOR]