Search

This article considers the decentralized fractional-order fault-tolerant control problem for unmanned aerial vehicles (UAVs) against wind disturbances and actuator faults in a directed communication network. A new composite adaptive disturbance observer-based decentralized fractional-order fault-tolerant control (CADOB-DFO-FTC) scheme, which incorporates fractional-order (FO) sliding-mode surfaces, nonlinear disturbance observers (NDOs), fuzzy wavelet neural networks (FWNNs), and robust controllers, is developed to achieve the attitude tracking control of networked UAVs in a decentralized way. Based on the FO sliding-mode surfaces, the NDOs are first developed to estimate the lumped uncertainties due to the aerodynamic parameter perturbations, wind disturbances, and actuator faults. Then, adaptive FWNNs with updating weighting matrices, mean vectors, and deviation vectors are constructed to effectively attenuate the adverse effects induced by the NDO estimation errors. Furthermore, to compensate the FWNN approximation errors, robust controllers are integrated into the developed control scheme to enhance the approximation abilities. It is shown that by using Lyapunov methods, all UAVs can track their attitude references. Finally, comparative simulation results are presented to demonstrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

In a dynamic environment, moving to the destination safely and effectively is of paramount importance for an unmanned ground vehicle (UGV). This article presents a strategy of trajectory planning and tracking that aims to ensure the UGV’s safety in an uncertain environment. Specifically, based on the initial environment information, a global optimal trajectory connecting the start and the destination is predefined by an artificial fish swarm algorithm (AFSA). In the presence of unforeseen obstacles, a trial-based forward search (TFS) algorithm based on the Markov chain is proposed in the local trajectory planning module, while collision prediction is integrated as heuristic information. The vehicle’s current state is updated accordingly for the sake of avoiding entire state spaces involved in the computation. Therefore, the storage efficiency and convergence rate in local path planning are sufficiently enhanced in comparison to dynamic programming. Moreover, command signals can be calculated with the proposed multiconstrained model predictive controller (MMPC), ensuring the vehicle to track the reference trajectory and smoothen the motion. Finally, the results in both simulations and experiments reveal the effectiveness of the proposed algorithm in the presence of both static and dynamic obstacles. Note to Practitioners—This article is motivated by the unmanned ground vehicle (UGV) collision avoidance problem in practical missions, such as farming and emergency response. In recent years, various trajectory planning and tracking algorithms have been widely developed. However, the environmental complexity and the intruders’ unexpected movement pose difficulties in trajectory planning, especially in ensuring the computation time under the allowable threshold. Moreover, the UGV practical trajectory tracking is a challenging task which demands a desired response within various physical constraints. In this article, a two-stage conflict resolution system is proposed. First, a trial-based forward search (TFS) is used to generate a new trajectory deviating the UGV from the initially generated trajectory by the artificial fish swarm algorithm (AFSA), aiming to avoid the unforeseen intruders (unknown in prior) in real-time. Using these two trajectory planning algorithms alternatively, both global trajectory optimality in a cluttered environment and appropriate maneuvers with respect to unexpected intruders can be achieved. Subsequently, the UGV is modeled according to its kinematic characteristics, and thus a multiconstrained model predictive controller (MMPC) is designed to follow the reference trajectory. The physical constraints are respected by integrating them into the controller. Simulations and experimental results demonstrate that the proposed strategy can guide and control a UGV from the start to the destination safely and smoothly, even in the case of multiple obstacles with constant or varying velocities. Furthermore, the proposed collision avoidance strategy can be extended to other unmanned systems, including unmanned aerial vehicles and unmanned surface vehicles. [ABSTRACT FROM AUTHOR]

Focusing on a quadrotor unmanned aerial vehicle (UAV), the presence of unintended actuator faults and external disturbances increases the risk of a crash. Although plenty of efforts have been devoted, how to integrate capability analysis into safety control design is still an open issue. This article presents the design of a safety control system for quadrotor UAVs. Firstly, a system capability analysis method based on a differential flatness algorithm is developed, so that the derivatives (i.e., velocity, jerk, and snap) of flight trajectory can be formulated as flat variables. A tradeoff between system capability and permissible flight maneuverability is made to avoid actuator saturation. Secondly, dual-loop nonlinear disturbance observers are exploited to identify the actuator faults and disturbances, which can thereby be handled by a cascade control scheme. Moreover, the trajectory is regenerated online at the expense of degraded flight maneuverability or even emergency landing, in view of the remaining actuator control authority. When comparing to the existing methods, the gap among safety control, trajectory generation, and system capability analysis is bridged to ameliorate practical flight safety. Finally, flight tests are carried out to demonstrate the unique merits of the proposed system. [ABSTRACT FROM AUTHOR]