Search

Accurate prediction of air quality is crucial for assessing the state of the atmospheric environment, especially considering the nonlinearity, volatility, and abrupt changes in air quality data. This paper introduces an air quality index (AQI) prediction model based on the Dung Beetle Algorithm (DBO) aimed at overcoming limitations in traditional prediction models, such as inadequate access to data features, challenges in parameter setting, and accuracy constraints. The proposed model optimizes the parameters of Variational Mode Decomposition (VMD) and integrates the Informer adaptive sequential prediction model with the Convolutional Neural Network-Long Short Term Memory (CNN-LSTM). Initially, the correlation coefficient method is utilized to identify key impact features from multivariate weather and meteorological data. Subsequently, penalty factors and the number of variational modes in the VMD are optimized using DBO. The optimized parameters are utilized to develop a variationally constrained model to decompose the air quality sequence. The data are categorized based on approximate entropy, and high-frequency data are fed into the Informer model, while low-frequency data are fed into the CNN-LSTM model. The predicted values of the subsystems are then combined and reconstructed to obtain the AQI prediction results. Evaluation using actual monitoring data from Beijing demonstrates that the proposed coupling prediction model of the air quality index in this paper is superior to other parameter optimization models. The Mean Absolute Error (MAE) decreases by 13.59%, the Root-Mean-Square Error (RMSE) decreases by 7.04%, and the R-square (R2) increases by 1.39%. This model surpasses 11 other models in terms of lower error rates and enhances prediction accuracy. Compared with the mainstream swarm intelligence optimization algorithm, DBO, as an optimization algorithm, demonstrates higher computational efficiency and is closer to the actual value. The proposed coupling model provides a new method for air quality index prediction. [ABSTRACT FROM AUTHOR]

InSAR (Interferometric Synthetic Aperture Radar) is widely recognized as a crucial remote sensing tool for monitoring various geological disasters because it provides all-day and all-weather monitoring. Nevertheless, the current interpretation methods for InSAR heavily depend on the interpreter's experience, which hinders efficiency and fails to meet the requirements for the timely detection of geologic hazards. Furthermore, the results obtained through current InSAR processing carry inherent noise interference, further complicating the interpretation process. To address those issues, this paper proposes an approach that enables automatic and rapid identification of deformation zones. The proposed method leverages IPTA (Interferometric Point Target Analysis) technology for SAR data processing. It combines the power of HNSW (Hierarchical Navigable Small Word) and DBSCAN (Density-Based Spatial Clustering of Applications with Noise) algorithms to cluster deformation results. Compared with traditional methods, the computational efficiency of the proposed method is improved by 11.26 times, and spatial noise is suppressed. Additionally, the clustering results are fused with slope units determined using DEM (Digital Elevation Model), which facilitates the automatic identification of slopes experiencing deformation. The experimental verification in the western mountainous area of Beijing has identified 716 hidden danger areas, and this method is superior to the traditional technology in speed and automation. [ABSTRACT FROM AUTHOR]

The adverse effects caused by PM2.5 have drawn extensive concern and it is of great significance to identify its spatial distribution. Satellite-derived aerosol optical depth (AOD) has been widely used for PM2.5 estimation. However, the coarse spatial resolution and the gaps caused by data deficiency impede its better application at the urban scale. Additionally, obtaining accurate results in unsampled spatial areas when PM2.5 ground sites are insufficient and distribute sparsely is also a challenging issue for PM2.5 spatial distribution estimation. This paper aimed to develop a model, i.e., spatially local extreme gradient boosting (SL-XGB), combining the powerful fitting ability of machine learning and optimal bandwidths of local models, to better estimate PM2.5 concentration at the urban scale by using Beijing as the study area. This paper adopted simplified high-resolution MODIS aerosol retrieval algorithm (SARA) AOD at 500 m resolution as the major independent variable, hence, ensuring the estimation can be operated at a fine scale. Moreover, the extreme gradient boosting (XGBoost) model was adopted to fill the gaps in SARA AOD, thus improving its availability. Then, based on full-covered SARA AOD and other multisource data, the SL-XGB model, integrating multiple local XGBoost models and particular optimal bandwidths, was trained to estimate PM2.5 concentration. For comparison, SL-XGB and two other models, XGBoost and geographically weighted regression (GWR), were evaluated by 10-fold cross validation (CV). The sample-based CV results reveal that the SL-XGB performed the best as assessed through R2 (0.88), root mean square error (RMSE = 24.08 μg/m3) and mean prediction error (MPE = 16.90 μg/m3). Additionally, SL-XGB also performed the best in the site-based CV with a R2 of 0.86, a RMSE of 26.15 μg/m3 and a MPE of 17.97 μg/m3, which shows its good spatial generalization ability. These results demonstrate that SL-XGB can better simultaneously handle non-linear and spatial heterogeneity issues despite spatially limited data at the urban scale. As far as the PM2.5 concentration distribution was concerned, it presented a gradient increase in PM2.5 concentrations from the northwest to the southeast in Beijing, with abundant spatial details. Overall, the proposed approach for PM2.5 estimation showed outstanding performance and can support preventive pollution control and mitigation at the urban scale. [ABSTRACT FROM AUTHOR]

This paper introduces a new algorithm (BUNTUS—Built-up, Nighttime Light, and Travel time for Urban Size) using remote sensing techniques to delineate urban boundaries. The paper is part of a larger study of the role of urbanisation in changing fossil fuel emissions. The method combines estimates of land cover, nighttime lights, and travel times to classify contiguous urban areas. The method is automatic, global and uses data sets with enough duration to establish trends. Validation using ground truth from Landsat-8 OLI images revealed an overall accuracy ranging from 60% to 95%. Thus, this approach is capable of describing spatial distributions and giving detailed information of urban extents. We demonstrate the method with examples from Brisbane, Australia, Melbourne, Australia, and Beijing, China. The new method meets the criteria for studying overall trends in urban emissions. [ABSTRACT FROM AUTHOR]

Foreign Object Debris (FOD) refers to any foreign material on the airfield that may injure and threaten the aircraft and airport system. Due to the complex background on the airfield pavement and weak target echoes in long-distance monitoring, it is not easy to detect objects of various types and sizes. The existing FOD radar system's detection method has a short effective range, and the detectable objects' radar cross-section intensity is no less than −20 dBsm. In this paper, we propose an integrated FOD automatic target detection algorithm for millimeter-wave (MMW) surveillance radar to improve small target detection under long-range conditions of over 660 m. The signal form of FOD and a clutter model of ground clutter received by millimeter-wave radar are primarily utilized and established theoretically. The runway edge detection means that it is employed based on the in-continuity features as the runway region of interest during the automatic extraction step. Following the clutter map constant false alarm detection algorithm, we utilize a time-domain algorithm that functions as the vital detection processor. Moreover, an explicit definition of the FOD detection performance is developed in a characteristic quantitative way. This criterion involves an absolute reference value for all FOD radar systems. The well-designed FOD frequency-modulated continuous-wave MMW surveillance radar is utilized, and actual experiments are carried out in a real airport in Beijing, China. The results validate the proposed method's effectiveness and the superior performance of FOD target detection in long-range situations. [ABSTRACT FROM AUTHOR]

This paper focuses on the optimization problem of a signal timing design based on the concept of bus priority. This optimization problem is formulated in the form of a bi-level programming model that minimizes average passenger delay at intersections and vehicle delay in lanes simultaneously. A solution framework that implements the differential evolution (DE) algorithm is developed to efficiently solve the model. A case study based on a real-world intersection in Beijing, China, is implemented to test the efficiency and applicability of the proposed modeling and computing methods. The experiment's result shows that the optimization model can not only significantly improve the priority capacity of the buses at the intersection but also reduce the adverse impact of bus-priority approaches on the private vehicles for the intersections. [ABSTRACT FROM AUTHOR]

The values of ratio a of the linear relationship between specific attenuation and specific differential phase vary significantly in convective storms as a result of resonance scattering. The best-linear-fit ratio a at X band is determined using the modified attenuation correction algorithm based on differential phase and attenuation, as well as the premise that reflectivity is unattenuated in S band radar detection. Meanwhile, the systemic reflectivity bias between the X band radar and S band radar and water layer attenuation (ZW) on the wet antenna cover of the X band radar are also considered. The good performance of the modified correction algorithm is demonstrated in a moderate rainfall event. The data were collected by four X band dual-polarization (X-POL) radar sites, namely, BJXCP, BJXFS, BJXSY, and BJXTZ, and a China's New Generation Weather Radar (CINRAD/SA radar) site, BJSDX, in Beijing on 20 July 2016. Ratio a is calculated for each volume scan of the X band radar, with a mean value of 0.26 dB deg−1 varying from 0.20 to 0.31 dB deg−1. The average values of systemic reflectivity bias between the X band radar (at BJXCP, BJXFS, BJXSY, and BJXTZ) and S band radar (at BJSDX) are 0, −3, 2, and 0 dB, respectively. The experimentally determined ZW is in substantial agreement with the theoretically calculated ones, and their values are an order of magnitude smaller than rain attenuation. The comparison of the modified attenuation correction algorithm and the empirical-fixed-ratio correction algorithm is further evaluated at the X-POL radar. It is shown that the modified attenuation correction algorithm in the present paper provides higher correction accuracy for rain attenuation than the empirical-fixed-ratio correction algorithm. [ABSTRACT FROM AUTHOR]

Onboard the Chinese GaoFen-5 (GF5) satellite, the Environmental trace gases Monitoring Instrument (EMI) is a nadir-viewing wide-field spectrometer that was launched on May 9, 2018. EMI measures the back-scattered earthshine solar radiance in the ultraviolet and visible spectral range. By using the differential optical absorption spectrometry (DOAS) method and the EMI measurements in the VIS1 band (405–465 nm), we performed retrievals of NO2. Some first retrieval results of NO2 from EMI and a comparison with OMI and TROPOMI products are presented in this paper. The monthly mean total vertical column densities (VCD) of NO2 show similar spatial distributions to OMI and TROPOMI (r > 0.88) and their difference is less than 27%. A comparison of the daily total VCD shows that EMI could detect the NO2 patterns in good agreement with OMI (r = 0.93) and TROPOMI (r = 0.95). However, the slant column density (SCD) uncertainty (0.79 × 1015 molec cm−2) of the current EMI algorithm is relatively larger than OMI. The daily variation pattern of NO2 from EMI in Beijing in January 2019 is consistent with TROPOMI (r = 0.96). The spatial distribution correlation of the tropospheric NO2 VCD of EMI with OMI and TROPOMI is 0.88 and 0.89, respectively, but shows an overestimate compared to OMI (15%) and TROPOMI (23%), respectively. This study demonstrates the capability of using EMI for global NO2 monitoring. [ABSTRACT FROM AUTHOR]