Search

ABSTRACT A dual band Artificial Magnetic Conductor (AMC) with capacitive tuning of reflection phase at lower band frequency is proposed. The AMC operates at upper band of fixed frequency at 5.8 GHz while the lower band reconfigurable frequency is from 2.5 GHz up to 3.1 GHz. The simulated reconfigurable frequencies are 2.5, 2.62, and 3.10 GHz. The corresponding resonance structure for each band is circular patch and circular slotted ring with single capacitor per AMC unit cell. Subsequently, the AMC is incorporated with conventional UWB antenna. The effects of AMC capacitive tuning to UWB antenna performance are studied in terms of frequency reconfigurability, gain, and radiation patterns. Measurement is also carried out for the reflection coefficient and radiation patterns. Parametrical studies of the antenna such as the misalignment between the top and bottom substrate layers, air gap between the substrate layers, and capacitance tolerance of the capacitor to the reflection coefficients are also discussed. © 2016 Wiley Periodicals, Inc. Microwave Opt Technol Lett 58:2422-2429, 2016 [ABSTRACT FROM AUTHOR]

ABSTRACT This article presents a technique to enhance the bandwidth of a rectangular dielectric resonator antenna using a circular slot. The structures are designed and simulated using CST Microwave Studio software, and it is found that the circular slot exhibits a bandwidth of 36.44% (0.92-1.33 GHz). The circular slot is compared with the rectangular slot. It is shown that the rectangular slot produces a bandwidth of 6.39% (1.06-1.13 GHz). Both structures exhibit similar radiation patterns with slightly different gains at 3.10 and 3.25 dBi. The bandwidth is enhanced more than five times using the circular slot, compared to the rectangular slot. © 2016 Wiley Periodicals, Inc. Microwave Opt Technol Lett 58:506-509, 2016 [ABSTRACT FROM AUTHOR]

ABSTRACT A composite right-/left-handed transmission line metamaterial antenna with enhanced bandwidth and efficiency is proposed. The antenna combines zeroth-order resonant (ZOR) and positive-order resonant (POR) modes for the bandwidth enhancement. An asymmetrical coplanar waveguide technique is used to feed the antenna and also to achieve certain degree of compactness. The overall size of the antenna is 0.32λ0 × 0.38λ0 × 0.012λ0 (40 × 48 × 1.52 mm) at 2.4 GHz. Simulation results show that a bandwidth enhancement of 41% is obtained with the radiation efficiencies of 95 and 97% for the ZOR and POR modes, respectively. The measured impedance bandwidth shows that the antenna has potential applications for WLAN (2.39-2.45 GHz) and WiMAX (2.5-2.69 GHz) operations. The simulated and measured antenna performances in terms of return loss and the radiation patterns are presented and compared. © 2015 Wiley Periodicals, Inc. Microwave Opt Technol Lett 57:252-256, 2015 [ABSTRACT FROM AUTHOR]

ABSTRACT In this article, a duals-band metamaterial antenna with a new composite right/left-handed (CRLH) unit cell configuration is proposed. The antenna is a coplanar waveguide (CPW) base which uses quarter wave resonators without via. Both sides of the CPW ground plane are short circuited to the CRLH-transmission line. The dimension is 31 mm × 22 mm × 1.52 mm, with electrical size of 0.23 λo × 0.17 λo × 0.011 λo at 2.26 GHz, and which is compact in size. Resonance frequency of the negative mode can be altered by controlling the loop currents. Peak gains of 1.74 and 2.69 dBi are obtained at 2.26 and 2.89 GHz. Radiation efficiencies of 64% and 92% are obtained at 2.26 and 2.89 GHz, respectively. The simulated and measured return losses, as well as the radiation patterns, are presented and compared. © 2014 Wiley Periodicals, Inc. Microwave Opt Technol Lett 56:1575-1579, 2014 [ABSTRACT FROM AUTHOR]

This article presents the design, simulation, and fabrication of a new planar left-handed metamaterial (LHM), which consist of a combination of a modified square rectangular split ring resonator and strip wire. Both structures are on the same plane. The structure is simulated and measured with the microstrip antenna operating at frequency 5.8 GHz. The LHM has been analyzed using Nicolson-Ross-Weir approach to obtain the negative permeability and permittivity at 5.8 GHz. The fabrication of the LHM is on FR-4 board substrate. From the simulation and measurement results, the gain of the microstrip antenna with LHM has increased by 4.0 dB. The return loss of the antenna with LHM is improved to 15.7 dB compare without LHM structure. © 2012 Wiley Periodicals, Inc. Microwave Opt Technol Lett 54:2828-2832, 2012; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.27186 [ABSTRACT FROM AUTHOR]

A novel hybrid dielectric resonator antenna (DRA) excited by a printed monopole antenna is proposed and implemented. This new microstrip-fed fork-like stepped monopole antenna is designed to obtain a wide impedance bandwidth from 2 to 6 GHz. A quad-band characteristic is achieved by incorporating two modified cylindrical dielectric resonators with a high dielectric constant of 80, on top of the monopole exciter. Measured results demonstrated that the proposed DRA can be used in multiband wireless operations, covering GSM, PCS, UMTS, WLAN, and WiMax systems, from 1.75 to 5.85 GHz. Experimental and simulation results show a good agreement. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:2887-2890, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26407 [ABSTRACT FROM AUTHOR]

In this article, the design of log periodic fractal Koch antenna using the second iteration has been developed for ultra high frequency band applications. The ability to reduce the size as maintaining the performances of the antenna such as input return loss and radiation patterns brings fractal Koch and becomes enticing among researchers. The design of the log periodic fractal Koch antenna has been elaborated in this article. The computer simulation technology software has been used to analyze the performances of the designed antenna. This has been compared between simulation and measurement. The results show that this antenna has been reduced by up to 27% in size from the normal log periodic planar dipole antenna. The performance of the antenna has been compared in terms of return losses, bandwidths, and radiation patterns. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26111 [ABSTRACT FROM AUTHOR]

A textile artificial magnetic conductor (AMC) waveguide sheet with a textile diamond dipole is proposed to improve wireless on-body transmission. The sheet-like waveguide provides an independent transmission path which can reduce the performance degradation caused by the human body. The proposed AMC sheet is made entirely of textiles for both the substrate and the conducting parts, thus making it suitable for wearable communications. Transmission characteristics between antennas are studied rigorously in free space and on-body environments. Significant transmission enhancement is observed for all the tested orientations and positions for both free space and onbody placements. With the presence of the AMC, the S21 has peaks of up to a maximum of -9.9 dB. This textile AMC sheet constitutes a new approach for efficient wearable wireless body-centric communications. [ABSTRACT FROM AUTHOR]

A small electrical metamaterial (MTM) antenna, based on a modified electrical coupled resonator for bandwidth enhancement, is presented. The bandwidth enhancement is achieved using a modified electric coupled (MELC) resonator as the antenna's main radiating element. This modification is achieved using two strip lines placed below a conventional electric coupled (CELC) resonator. The measured impedance bandwidth at -10 dB is 20.7% at a resonance frequency of 2.62 GHz. The design is validated by experimental results, and the proposed antenna is suitable for worldwide interoperability for microwave access (WiMax) applications (2.5-2.69 GHz). [ABSTRACT FROM AUTHOR]

ABSTRACT A wideband antenna fed by a coplanar waveguide (CPW) with reconfigurable function is presented. The wideband function is achieved from 1.39 GHz to 8.11 GHz using an elliptical radiator with a CPW feed line. Meanwhile, three pairs of slot dipoles which are fed by CPW are used to achieve triple-band function at 2.4 GHz, 3.5 GHz and 5.2 GHz. Four ideal switches are placed on the proposed antenna. The proposed antenna is designed, simulated, fabricated and tested. All simulated and measured results of return loss, radiation pattern and gain are presented. Good results of return loss and radiation pattern are obtained thus verifying that the proposed antenna is suitable for future multimode radio systems. © 2016 Wiley Periodicals, Inc. Microwave Opt Technol Lett 58:2079-2082, 2016 [ABSTRACT FROM AUTHOR]

ABSTRACT A new reconfigurable multiband antenna is presented. The antenna operates in triple band and can be switched to operate either in single or dual band. The multifrequency band is achieved by using slots dipole antenna fed by a coplanar waveguide (CPW). Six switches are used and positioned at specific locations in the slots to achieve frequency reconfigurability. The antenna reconfiguration is realized when the dipole arms are coupled or decoupled from the slot edges. Three different sub-band frequencies (2.40, 3.50, and/or 5.20 GHz) are obtained. Measured and simulated results are presented. The proposed antenna may be suitable for future multimode applications such as cognitive radio systems. © 2014 Wiley Periodicals, Inc. Microwave Opt Technol Lett 56:735-740, 2014 [ABSTRACT FROM AUTHOR]

A slot dipole antenna with a reconfigurable operating frequency is presented. The antenna comprises two pairs of slot arms. Each arm incorporates a number of varactor diodes. The antenna is capable of operating in single-band or dual-band mode. In each case, the location of these bands can be altered by varying the voltage applied to the varactor diodes. The antenna can be tuned over a wide frequency range, namely 1.5-4.5 GHz (i.e. a ratio of 3:1). The antenna is potentially useful for cognitive radio application, particularly in a small base station or access point terminal. [ABSTRACT FROM AUTHOR]