Search

In this article, we study anisotropic immersed finite element (AIFE) methods for the elliptic interface system. After establishing the existence and uniqueness of the weak solution, we construct a linear AIFE method for solving the interface system. Different from the scalar problem, the jump conditions for each unknown function are coupled together in the anisotropic problem considered here. Through defining suitable interpolations, we deduce the error estimates in L2‐$$ {L}^2\hbox{-} $$ and H1‐norms$$ {H}^1\hbox{-} \mathrm{norms} $$ for the proposed AIFE method. Moreover, we show some numerical experiments to verify the correction of the theoretical predictions. [ABSTRACT FROM AUTHOR]

Background: Recently, deep convolutional neural networks (CNNs) have been widely adopted for ultrasound sequence tracking and shown to perform satisfactorily. However, existing trackers ignore the rich temporal contexts that exists between consecutive frames, making it difficult for these trackers to perceive information about the motion of the target. Purpose: In this paper, we propose a sophisticated method to fully utilize temporal contexts for ultrasound sequences tracking with information bottleneck. This method determines the temporal contexts between consecutive frames to perform both feature extraction and similarity graph refinement, and information bottleneck is integrated into the feature refinement process. Methods: The proposed tracker combined three models. First, online temporal adaptive convolutional neural network (TAdaCNN) is proposed to focus on feature extraction and enhance spatial features using temporal information. Second, information bottleneck (IB) is incorporated to achieve more accurate target tracking by maximally limiting the amount of information in the network and discarding irrelevant information. Finally, we propose temporal adaptive transformer (TA‐Trans) that efficiently encodes temporal knowledge by decoding it for similarity graph refinement. The tracker was trained on 2015 MICCAI Challenge on Liver Ultrasound Tracking (CLUST) dataset to evaluate the performance of the proposed method by calculating the tracking error (TE) between the predicted landmarks and the ground truth landmarks for each frame. The experimental results are compared with 13 state‐of‐the‐art methods, and ablation studies are conducted. Results: On CLUST 2015 dataset, our proposed model achieves a mean TE of 0.81 ± 0.74 mm and a maximum TE of 1.93 mm for 85 point‐landmarks across 39 ultrasound sequences in the 2D sequences. Tracking speed ranged from 41 to 63 frames per second (fps). Conclusions: This study demonstrates a new integrated workflow for ultrasound sequences motion tracking. The results show that the model has excellent accuracy and robustness. Reliable and accurate motion estimation is provided for applications requiring real‐time motion estimation in the context of ultrasound‐guided radiation therapy. [ABSTRACT FROM AUTHOR]

Aspergillus flavus produces potent mutagenic and carcinogenic polyketidederived secondary metabolites known as aflatoxins. Development of host plant resistance in peanut and other crops is the most environmentally friendly and cost-effective method to eliminate the serious problem of aflatoxin contamination in grains. To confirm that putative peanut genes identified in a previous microarray study were involved in peanut resistance to A. flavus infection, 14 genes were selected for further investigation through real-time PCR. The results revealed diverse patterns of gene expression during seed germination after A. flavus inoculation. Based on the expression levels and the relative-expression patterns over a 7-day period, the 14 host genes could be classified into six different groups belonging to three main biochemical and genetic defence processes of lipid metabolism, oxidative signalling and cell-wall synthesis during counterattack. A network of gene expression patterns was activated in sequential order in response to A. flavus invasion in both resistant and susceptible peanut lines during seed germination. Understanding gene expression patterns in peanut will be useful to breeders and other scientists interested in incorporating genetic resources of resistance against A. flavus into peanut germplasm and/or commercial cultivars via conventional and/or molecular methods. [ABSTRACT FROM AUTHOR]

Large lattice constant Y3Al5O12, Gd3Ga5O12 (GGG), Y3Sc2Ga3O12 (YSGG), Gd3Sc2Ga3O12, Ca0.4Mg0.25Zr0.65Gd2.6Ga4.1O12 (CaMgZr:GGG), and Gd1.17Y1.83Sc2Ga3O12 (GYSGG) substrate crystals with 2 in. in diameter are grown by the Czochralski (Cz) method, their physical, chemical, and optical properties are analyzed and compared in details. The X‐ray rocking curves (XRCs) illustrate that the as‐grown crystals possess high crystalline quality. The lattice constants of six crystals are calculated and that of GYSGG can be easily adjusted in the range of 1.2450–1.2565 nm by changing the Gd/Y proportion. The dislocation densities on the (111)‐crystalline face are about 102 cm−2 order of magnitude. The thermal conductivities of six crystals are measured to be 11.72, 8.98, 6.83, 5.45, 4.67, and 4.66 W m−1 K−1, respectively. It is found that the thermal expansion coefficients of six crystals can be reduced by annealing at 1273 K for 60 h. In addition, the transmission spectra show that the six crystals have excellent transparency and the coefficients of the Sellmeier equation are fitted by the calculated refractive indices. These results of the six crystals can provide the necessary parameters and references for the selection of suitable substrate materials or laser host crystals. [ABSTRACT FROM AUTHOR]

With the increase of environmental pollution and depletion of fossil fuel resources, the utilization of renewable biomass resources for developing functional materials or fine chemicals is of great value and has attracted considerable attention. Nanocellulose, as a well‐known renewable nanomaterial, is regarded as a promising nano building block for advanced functional materials owing to its unique structure and properties, as well as natural abundance. Typically, its high mechanical strength, structural flexibility, reinforcing capabilities, and tunable self‐assembly behavior makes it highly attractive to fabricate flexible materials for various applications. Herein, the recent progress in the design, properties, and applications of advanced flexible materials from nanocellulose is comprehensively summarized. The preparation and properties of nanocellulose are first briefly introduced and discuss its merits in fabricating flexible materials. Then, various advanced flexible materials from nanocellulose are introduced, and the critical role of nanocellulose in constructing flexible materials is highlighted based on its intrinsic properties. After that, their applications in energy storage, electronics, sensor, biomedical, thermally insulating, photonic devices, etc., are presented. At last, the outlook of the current challenges and future perspectives for developing nanocellulose‐derived flexible materials are discussed. [ABSTRACT FROM AUTHOR]

In the work presented here, well-dispersed ferric giniite microcrystals with controlled sizes and shapes are solvothermally synthesized from ionic-liquid precursors by using 1- n-butyl-3-methylimidazolium dihydrogenphosphate ([Bmim][H2PO4]) as phosphate source. The success of this synthesis relies on the concentration and composition of the ionic-liquid precursors. By adjusting the molar ratios of Fe(NO3)3 ⋅9H2O to [Bmim][H2PO4] as well as the composition of ionic-liquid precursors, we obtained uniform microstructures such as bipyramids exposing {111} facets, plates exposing {001} facets, hollow spheres, tetragonal hexadecahedron exposing {441} and {111} facets, and truncated bipyamids with carved {001} facets. The crystalline structure of the ferric giniite microcrystals is disclosed by various characterization techniques. It was revealed that [Bmim][H2PO4] played an important role in stabilizing the {111} facets of ferric giniite crystals, leading to the different morphologies in the presence of ionic-liquid precursors with different compositions. Furthermore, since these ferric giniite crystals were characterized by different facets, they could serve as model Fenton-like catalysts to uncover the correlation between the surface and the catalytic performance for the photodegradation of organic dyes under visible-light irradiation. Our measurements indicate that the photocatalytic activity of as-prepared Fenton-like catalysts is highly dependent on the exposed facets, and the surface area has essentially no obvious effect on the photocatalytic degradation of organic dyes in the present study. It is highly expected that these findings are useful in understanding the photocatalytic activity of Fenton-like catalysts with different morphologies, and suggest a promising new strategy for crystal-facet engineering of photocatalysts for wastewater treatment based on heterogeneous Fenton-like process. [ABSTRACT FROM AUTHOR]

Background: Heavy menstrual bleeding is a common problem that can severely affect quality of life.Objectives: To compare bipolar radiofrequency endometrial ablation and thermal balloon ablation for heavy menstrual bleeding in terms of efficacy and health-related quality of life (HRQoL).Search Strategy: Online registries were systematically searched using relevant terms without language restriction from inception to November 24, 2016.Selection Criteria: Randomized control trials or cohort studies of women with heavy menstrual bleeding comparing the efficacy of two treatments were eligible.Data Collection and Analysis: Data were extracted. Results were expressed as risk ratios (RRs) or weighted mean differences (WMDs) with 95% confidence intervals (CIs).Main Results: Six studies involving 901 patients were included. Amenorrhea rate at 12 months was significantly higher after bipolar radiofrequency endometrial ablation than after thermal balloon ablation (RR 2.73, 95% CI 2.00-3.73). However, no difference at 12 months was noted for dysmenorrhea (RR 1.04, 95% CI 0.68-1.58) or treatment failure (RR 0.78, 95% CI 0.38-1.60). The only significant difference for HRQoL outcomes was for change in SAQ pleasure score (12 months: WMD -3.51, 95% CI -5.42 to -1.60).Conclusions: Bipolar radiofrequency endometrial ablation and thermal balloon ablation reduce menstrual loss and improve quality of life. However, bipolar radiofrequency endometrial ablation is more effective in terms of amenorrhea rate and SAQ pleasure. [ABSTRACT FROM AUTHOR]

Decabrominated diphenyl ether (PBDE-209) is a persistent organic pollutant. Gestational exposure to PBDE-209 can accumulate in pregnant women and fetuses via the placenta and umbilical cord, affecting perinatal outcome. In this study, pregnant Sprague–Dawley (SD) rats were randomly divided into five groups and intragastrically administered peanut oil (vehicle) 1, 5 and 10 mg/kg by body weight (b.w.) of PBDE-209, or nothing (control) from day 0 (G0) to day 21 (G21) gestation, respectively. Placental samples were collected on G21 by cesarean section. The mRNA and protein expressions of ET-1, eNOS and iNOS in the placenta were examined using qRT-PCR and Western blot, respectively. Total nitric oxide (NO) in the placenta was measured using a specific ELISA kit. Compared with the control and vehicle groups, the mRNA expression of ET-1 and iNOS in the placenta was gradually and significantly increased after exposure to increasing concentrations of PBDE-209 ( P < 0.05), while the mRNA level of eNOS in the placenta was gradually and significantly reduced after exposure to increasing concentrations of PBDE-209 ( P < 0.05). The expression trends of ET-1, eNOS and iNOS proteins were consistent with those of mRNA expression. Interestingly, the production of total NO was significantly increased after exposure to 5 and 10 mg/kg b.w. PBDE-209 ( P < 0.05). Finally, the birth weight of the offspring rats was significantly reduced after maternal exposure to 5 and 10 mg/kg b.w. PBDE-209 compared with the control and vehicle groups ( P < 0.05). These results suggest that PBDE-209 exposure during pregnancy upregulates ET-1 and iNOS expression, but decreases eNOS expression in the placenta, as well as reduces the birth weight of offspring. [ABSTRACT FROM AUTHOR]