Search

Forensic document examination has been considered one of the most important fields in the forensic science. For this, a quick, effective, and cheap techniques for evaluation of forensic evidence is highly required. This study explores the comparison of A4 document paper by chemical and physical analysis. 16 of white A4 paper from different brands were analyzed by FTIR for investigation of structural characteristics. Video Spectral Comparator 8000 has been used to compare the A4 papers under different light source. The inorganic filler composition in the paper is also explored by ICP‐OES. The calcium carbonate content in document papers play a discriminant role which found to be between 16.02 % and 35.54 %. Also, water contact angle has been utilized in order to examine the surface of paper which is generally related to the inorganic filler and other additives. The WCA results ranged between 83° and 111° that enable quick and easy way to compare A4 document papers. The experimental results have demonstrated that besides FTIR methods, other methods such as ICP‐OES for elemental composition, WCA for wetting test, VSC for visualization under different light of source could have been applied for comparison of document papers in case of criminal cases. [ABSTRACT FROM AUTHOR]

In the era of liquid biopsy, microRNAs emerge as promising candidates for the early diagnosis and prognosis of cancer, offering valuable insights into the disease's development. Among all the existing analytical approaches, even if traditional approaches such as the nucleic acid amplification ones have the advantages to be highly sensitive, they cannot be used at the point-of-care, while sensors might be poorly sensitive despite their portability. In order to improve the analytical performance of existing electroanalytical systems, we demonstrate how a simple chromatographic paper-based disk might be useful to rationally improve the sensitivity, depending on the number of preconcentration cycles. A paper-based electrochemical platform for miRNA detection has been developed by modifying a paper-based electrode with a methylene blue (MB)-modified single-stranded sequence (ssDNA) complementary to the chosen miRNA, namely miR-224 that is associated with lung cancer. A detection limit of ca. 0.6 nM has been obtained in spiked human serum samples. To further enhance the sensitivity, an external chromatographic wax-patterned paper-based disk has been adopted to preconcentrate the sample, and this has been demonstrated both in standard and in serum solutions. For each solution, three miR-224 levels have been preconcentrated, obtaining a satisfactory lowering detection limit of ca. 50 pM using a simple and sustainable procedure. This approach opens wide possibilities in the field of analytical and bioanalytical chemistry, being useful not only for electrochemistry but also for other architectures of detection and transduction. [ABSTRACT FROM AUTHOR]

Criminal practices in which an individual becomes vulnerable and prone to sexual assault after ingesting drinks spiked with doping substances have become a social concern globally. As forensic protocols require a multi‐tiered strategy for chemical evidentiary analysis, the backlog of evidence has become a significant problem in the community. Herein, a fast, sensible, and complementary dual analytical methodology was developed using a single commercial paper substrate for surface‐enhanced Raman spectroscopy (SERS) and paper spray mass spectrometry (PS‐MS) analysis to identify psychotropic substances added to alcoholic beverages irrefutably. To study and investigate this criminal practice, pharmaceutical formulations containing distinct psychotropic substances (zolpidem, clonazepam, diazepam, and ketamine) were added to drinks typically consumed at parties and festivals (Pilsen beer, açaí Catuaba®, gin tonic, and vodka mixed with Coca‐Cola Zero®). A simple liquid–liquid extraction with a low‐temperature partitioning (LLE‐LTP) procedure was applied to the drinks and effectively minimized matrix effects. As a preliminary analysis, SERS spectra combined with Hierarchical Clustering Analysis (HCA) provided sufficient information to investigate the samples further. The presence of the protonated species for the psychotropic substances in the spiked drinks was readily verified in the mass spectra and confirmed by tandem mass spectrometry. Finally, the results demonstrate the potential of this methodology to be easily implemented into the routine of forensic laboratories and to be further employed at harm reduction tends at parties and festivals to detect contaminated beverages promptly and irrefutably as an efficient tool to prevent such crimes. [ABSTRACT FROM AUTHOR]

Cultural heritage objects present a special set of challenges for chemical analysis. Often micro-sampling or even contacting the object is deemed an unacceptable risk to the object. This study examined if specular reflection FTIR, a non-sampling and non-contact analytical technique, can provide insight into chemical composition of the layered coatings on Frédéric Flachéron's paper negatives (1848–1852) in the Harrison D. Horblit Collection of Early Photography, in Houghton Library, at Harvard University. Specular reflection FTIR data confirmed the identification of beeswax and sandarac as the transparentizing media on Flachéron's paper negatives, as previously published by Lee Ann Daffner. However, specular reflection FTIR analysis also indicated that some negatives had additional localized coatings of orange shellac in specific areas of the images. To understand why Flachéron retouched his negatives with orange shellac, modern experimental replications of the paper negative process were performed. Through modern experimentation with the paper negative technique, it was found that Flachéron's coatings of shellac served as an integral part of his image-altering technique. The color of the orange shellac subtly alters contrast and density, but it does not mask an area the way an opaque watercolor or highly pigmented paint might. The fine adjustments to the negatives with orange shellac were an attempt to perfect the contrast in the print, and better render depth and detail. These discoveries add to a growing body of recent research that points to the historic and art historic importance of negatives and coatings in photography. The specificity with which specular reflection FTIR was able to nondestructively identify the chemical composition of the local coating, and specifically target the analysis on the areas in which it appeared, allowed for an understanding of Flachéron's use of local coatings as a retouching method rather than a protective coating. [ABSTRACT FROM AUTHOR]

The final exam is a very important part of the course teaching quality evaluation. Therefore, we analyzed the final examination paper of analytical chemistry 1 in our university. Then, we discussed the problems existing in the course, and formed the strategic thinking on the curriculum reform. Furthermore, we analyzed the elements of paper generation and quality assurance of the final exam. [ABSTRACT FROM AUTHOR]

Twenty-three cigarette paper samples were selected as the research object. Headspace-gas chromatography-ion migration spectrometry (HS-GC-IMS) was used to detect their aroma components. The differences and changes of aroma components in different samples were analyzed based on fingerprint, and the stability of cigarette paper was evaluated by principal component analysis and chemical measurement method. The results showed that a total of 29 compounds were identified from different scented cigarette paper, and the alcohols and ketones were the most. The aromatic components of cigarette paper samples from different manufacturers had their own characteristic peak regions, showing obvious differences. The cumulative contribution rate of the principal components of cigarette paper was 84. 07%. Cigarette paper from different manufacturers could be distinguished according to the characteristic components. The method could analyze the difference of aromatic components among different scented cigarette paper, and provide theoretical basis and technical support for quality stability maintenance and identification of the products processed in different places. [ABSTRACT FROM AUTHOR]

Paper-based analytical devices (PADs) are powerful platforms for point-of-need testing since they are inexpensive devices fabricated in different shapes and miniaturized sizes, ensuring better portability. Additionally, the readout and detection systems can be accomplished with portable devices, allying with the features of both systems. These devices have been introduced as promising analytical platforms to meet critical demands involving rapid, reliable, and simple testing. They have been applied to monitor species related to environmental, health, and food issues. Herein, an outline of chronological events involving PADs is first reported. This work also introduces insights into fundamental parameters to engineer new analytical platforms, including the paper type and device operation. The discussions involve the main analytical techniques used as detection systems, such as colorimetry, fluorescence, and electrochemistry. It also showed recent advances involving PADs, especially combining optical and electrochemical detection into a single device. Dual/combined detection systems can overcome individual barriers of the analytical techniques, making possible simultaneous determinations, or enhancing the devices' sensitivity and/or selectivity. In addition, this review reports on distance-based detection, which is also considered a trend in analytical chemistry. Distance-based detection offers instrument-free analyses and avoids user interpretation errors, which are outstanding features for analyses at the point of need, especially for resource-limited regions. Finally, this review provides a critical overview of the practical specifications of the recent analytical platforms involving PADs, demonstrating their challenges. Therefore, this work can be a highly useful reference for new research and innovation. [ABSTRACT FROM AUTHOR]

In the present work, a freshness indicator was developed by immobilizing extracted betacyanins from prickly pear fruit (PFB) onto cellulose filter paper to visually determine fish spoilage. Various properties of the prepared indicator, including color stability, moisture uptake, sensivity to hydrogen sulfide (H 2 S) gas and pH changes, and chemical analysis were studied. The PFB-based indicator exhibited good color stability at various temperatures and times, with no significan color changes observed during storage at 25, 4, and −18 °C for 8 days. The moisture absorption of the indicator based on PFB was lower than that of cellulose paper, which is crucial for colorimetric indicators. Basic nitrogen and sulfur compounds are the main volatile compounds produced during fish spoilage. The results of the present study showed that both total volatile basic nitrogen (TVB-N) and H 2 S gas produced during fish spoilage contributed to the color changes of betacyanin-based colorimetric indicators. The prepared freshness indicators were pH-sensitive, with significant color changes due to TVB-N and H 2 S production during fish storage. A significant correlation was observed between fish quality (pH, TVB-N and total viable count) and the visible color changes of the indicators. The color of the designed indicator shifted from dark pink to pale pink/white during fish storage. These prepared freshness indicators were inexpensive, easy to use, and non-toxic, making them suitable for assessing the quality and shelf life of fish fillets. • A freshness indicator was prepared based on prickly pear fruit betacyanins using cellulose paper. • The prepared indicator was sensitive to not only TVB-N but also H 2 S compounds. • A significant correlation was observed between fish quality and visible color changes. • The prepared indicator is low-cost and efficient for spoilage detection of protein-rich foods. [ABSTRACT FROM AUTHOR]

This document is an exclusive review of catalytic materials and their applications in various fields. It includes reviews on topics such as enzyme-nanoparticle immobilization for biocatalysis, the catalytic activity of gold enzymes, nickel single-atom catalysts for hydrogenation and dehydrogenation reactions, heterogeneous catalysts for oxime hydrogenation, advanced oxidation processes for water and air purification, and selective catalytic reduction technology for reducing NOx emissions from diesel engines. The reviews provide insights into the synthesis, structure, and application of different catalytic materials, highlighting their potential in solving technological challenges in sensing, catalysis, and biomedicine. [Extracted from the article]

There is a need to develop low-cost, reliable and portable devices to enhance the efficiency of microextraction techniques in complex samples. Metal-organic frameworks (MOFs) have proven to be promising sorbents due to their well-documented properties. However, their green preparation and combination with paper-based substrates have not been satisfactorily explored to fabricate sustainable sorptive phases. In this work, the hybridization of a paper substrate (as a sustainable support) with MOFs (as a sorptive phase) was carried out by one-pot approach. Concretely, the selected MOF, MIL-53(Al), was in-situ growth onto the paper surface in aqueous solution without the need for high temperature or pressure, thereby aligning with the Green Analytical Chemistry principles. The optimized composite (MIL-53(Al)@cellulose paper) was characterized and evaluated as extraction sorbent for five neonicotinoids (NEOs) (thiamethoxam, clothianidin, imidacloprid, acetamiprid, and thiacloprid). Furthermore, its feasibility was demonstrated by isolating these pollutants from environmental water samples, followed their determination by HPLC coupled to diode array detection. The whole method showed satisfactory analytical performance with recoveries between 86 and 114 %, suitable precision (with RSD lower than 14 %), and limits of detection ranged from 1.0 to 1.6 μg L−1. Besides, the greenness of the method was assessed by application of different existing metrics. The developed extraction device was affordable (<0.08 €/device) and mechanical and chemically stable, being possible its reuse more than 11 cycles, thus demonstrating its suitability for rapid screening of pesticides in environmental samples. This report presents, for the first time, the green synthesis of MIL-53(Al)cellulose paper composite and its application as a sorptive phase for the extraction of NEOs from environmental water samples. We believe that the proposed strategy for fabricating these sustainable paper-based sorptive phases paves the way for further hybridizations with other MOFs or materials. Additionally, it opens up large possibilities for their application in extraction of pollutants or other hazardous compounds in aquatic environments. [Display omitted] • A novel MOF@cellulose paper-based device has been developed. • Sustainable analytical method using green MOF synthesis, paper support and microextraction. • Cost-effective, user-friendly, reproducible and reusable extraction unit. • The sorptive phase combined with HPLC-DAD provided low LODs and satisfactory recoveries. • The method was successfully applied to the analysis of NEOs in water samples. [ABSTRACT FROM AUTHOR]

The absolute dating of documents is still one of the most important challenges for forensic document examiners (FDE). The potential difference between the date on a questioned document and the actual year of production of the used paper can be only 1 to 5 years. Until now, there was no analytical method with this accuracy available. This study demonstrates a method for an absolute dating of paper by using the 14C bomb peak and dating the starch in the paper. Accelerator mass spectroscopy (AMS) radiocarbon measurements were performed on starch extracts and cellulose fibers from 50 paper samples with known production year from 1950 to 2018. For most of the paper samples, the measured 14C concentration values in the starch extracts were highly correlated with the data of the 14C bomb peak calibration curve. The differences between the calibrated ages and the actual harvest years of the starch‐containing plants were only up to 3 years. The 14C concentration in the paper fibers showed a lower but significant correlation with the production year of the papers and can be used to support the dating results of the starch extracts. In order to secure the accuracy of the dating, aside from the radiocarbon measurements of the extracted starch other analytical methods or data are used, like a detailed chemical analysis of the paper composition including fiber composition and the spectroscopic analysis of the purity of the starch extracts. In practice, only starch extracts without contaminations are used for the paper dating. [ABSTRACT FROM AUTHOR]

The rapid development of micro-solid phase extraction (μ-SPE) procedures with new sorption materials, in particular, based on using natural materials, is currently reported. The production of these sorbents and the entire extraction procedure should support the implementation of Green Analytical Chemistry (GAC) principles. Promising materials are sorbents based on paper, which can be relatively easily modified, among others: by covering it with a polymer membrane. In this work, the practical application of paper-supported polystyrene used in the analysis of urine samples containing selected date-rape drugs (DRD) substances, and evaluation of the entire procedure using GAC metrics is presented. The paper-supported polystyrene membranes were successfully fabricated and characterized. The successful polystyrene coating on the paper was confirmed through ATR-FTIR measurements, ensuring even coverage. The μ-SPE procedure using this material facilitated extraction with a throughput of approximately 120 samples per hour in just a few steps. Throughout the research, a mixture of 100 mM acetic acid:methanol:acetonitrile (70:15:15, v/v/v) was selected as an optimal background electrolyte for capillary electrophoresis – mass spectrometry analysis. Validation results of this method demonstrated its suitability, exhibiting good linearity (R2 > 0.95), low limits of detection (3.1–15 ng mL−1), acceptable precision (<15 %), and recovery for all tested analytes. Furthermore, the greenness evaluation conducted with six different metrics: AGREEprep, AGREE, ComplexGAPI, SPMS, hexagonal metric, and WAC indicated the overall eco-friendliness and sustainability of the method, with minor concerns regarding energy consumption. The use of cellulose paper with polystyrene membranes for μ-SPE provides a versatile and eco-friendly extraction method for detecting DRDs in urine samples. The presented work is an example of the use of GAC metrics in the evaluation of the analytical procedure. The optimized PT-μ-SPE/CE–MS method allows for minimized reagent usage and waste production. Moreover, the method proves to be sustainable and efficient for forensic toxicology analysis. [Display omitted] • Utilizes a paper-supported polystyrene membrane for green micro-scale extraction. • A rapid micro-extraction method for multi analysis of DRD in urine samples. • Development of a comprehensive analytical procedure for determining DRD using the CE-MS technique. • Uses of metrics for evaluation of greenness of the analytical process. [ABSTRACT FROM AUTHOR]

The general objective of Analytical Chemistry, nowadays, is to obtain best-quality information in the shortest time to contribute to the resolution of real problems. In this regard, electrochemical biosensors are interesting alternatives to conventional methods thanks to their great characteristics, both those intrinsically analytical (precision, sensitivity, selectivity, etc.) and those more related to productivity (simplicity, low costs, and fast response, among others). For many years, the scientific community has made continuous progress in improving glucose biosensors, being this analyte the most important in the biosensor market, due to the large amount of people who suffer from diabetes mellitus. The sensitivity of the electrochemical techniques combined with the selectivity of the enzymatic methodologies have positioned electrochemical enzymatic sensors as the first option. This review, focusing on the electrochemical determination of glucose using paper-based analytical devices, shows recent approaches in the use of paper as a substrate for low-cost biosensing. General considerations on the principles of enzymatic detection and the design of paper-based analytical devices are given. Finally, the use of paper in enzymatic electrochemical biosensors for glucose detection, including analytical characteristics of the methodologies reported in relevant articles over the last years, is also covered. [ABSTRACT FROM AUTHOR]

Raman microscopic measurements were used to analyse the detailed chemical composition and structure of three old papers dating from the 15th and 19th centuries. Raman mapping measurements were performed on the surface and along the cross‐section of the papers with a lateral resolution of 1 μm. The resulting Raman images visualise the detailed chemical structure of the papers including all components such as the different types of cellulose fibre, filler pigments, sizing agents, colour pigments and also inadvertently added trace particles, such as minerals or products of biological activity. The results of the paper analysis are discussed in connection with their use for the detailed characterisation and dating of paper. This study demonstrates the great potential and the possibilities offered by Raman microscopy or Raman imaging for chemical paper analysis. Raman microscopy allows new insights into the chemical composition and structure of old papers and could considerably enhance the understanding of former papermaking practices and also combat forgery and the fraud of documents and artworks on paper. [ABSTRACT FROM AUTHOR]

The re-profiling from paper-grade to dissolving pulp production is a common trend for acid sulfite cooking of wood. This provides substantial changes in the composition of the spent sulfite liquor (SSL) affecting its potentialities in subsequent processing within the biorefinery concept. In this work, a comparative analysis of the chemical composition of SSL was performed from the magnesium-based acid sulfite cooking of Eucalyptus globulus wood to produce the paper-grade and dissolving pulps. More severe pulping conditions required for dissolving pulp production led to a substantial increase in volatile compounds in SSL, such as acetic acid, methanol, and furfural. At the same time, the amounts of dissolved sugars and lignosulfonates (LS) were increased to a less extent. The main changes detected in LS were related to the increase of its molecular weight, degree of condensation, and sulfonation degree. The increased concentration of the sulfuric acid in SSL was one of the reasons for these changes. [ABSTRACT FROM AUTHOR]

The existence of pesticide residues in the hydrosphere, biosphere, and anthroposphere can cause acute or chronic diseases and deteriorate the environment. Therefore, efficient detection of pesticide residues is of great significance to prevent food poisoning, control food pollution, and protect human lives by recognizing their distribution and concentration. Herein, a novel smartphone-coupled three-layered paper-based microfluidic chip is proposed as a facile platform to detect the pesticides. The stereoscopic capillary-driven fluid transport is enabled by the three-layered microfluidic chip configuration. The detection mechanism is based on the enzyme inhibition reaction and the chromatic reaction. The detection results are obtained by a smartphone and figured out by colorimetric quantitative analysis. Taking advantages of the above merits, we demonstrate the utilization of this smartphone-coupled three-layered paper-based microfluidic chip for the effective analysis of typical pesticides (profenofo and methomyl). The linear ranges of profenofo and methomyl are 0.27–2.1 μmol L−1 and 0.14–1.85 μmol L−1, respectively. The corresponding limits of detection in the chips are 55 nM and 34 nM, respectively. The paper-based chips are also highly cost-effective with a total cost of 0.082 ¥ per piece. It can be anticipated that this technique will open new avenues for the mass fabrication of paper-based microfluidic chips and provide state-of-the-art methods in the field of analytical chemistry. [ABSTRACT FROM AUTHOR]

This paper presents an innovative application of chitosan material to be used as pH-responsive valves for the precise control of lateral flow in microfluidic paper-based analytical devices (μPADs). The fabrication of μPADs involved wax printing, while pH-responsive valves were created using a solution of chitosan in acetic acid. The valve-forming solution was applied, and ready when dry; by exposure to acidic solutions, the valve opens. Remarkably, the valves exhibited excellent compatibility with alkaline, neutral, and acidic solutions with a pH higher than 4. The valve opening process had no impact on the flow rate and colorimetric analysis. The potential of chitosan valves used for flow control was demonstrated for μPADs employed for nitrate determination. Valves were used to increase the conversion time of nitrate to nitrite, which was further analyzed using the Griess reaction. The μPAD showed a linear response in the concentration range of 10–100 μmol L−1, with a detection limit of 5.4 μmol L−1. As a proof of concept, the assay was successfully applied to detect nitrate levels in water samples from artificial lakes of recreational parks. For analyses that require controlled kinetics and involve multiple sequential steps, the use of chitosan pH-responsive valves in μPADs is extremely valuable. This breakthrough holds great potential for the development of simple and high-impact microfluidic platforms that can cater to a wide range of analytical chemistry applications. [Display omitted] • The development of pH-responsive valves offers a simple fabrication method and operational advantage in paper-based devices. • Control over the chitosan valve is achieved by adjusting the proton concentration using acid solutions • Chitosan is a biocompatible material for constructing valves, enabling precise control over nitrate reduction • A proof-of-concept study using urban park water analysis demonstrates the effectiveness of chitosan valves. [ABSTRACT FROM AUTHOR]

This study proposed a proof-of-concept methodology for the investigation of paper samples by utilizing ATR-FTIR spectroscopy supported by chemometric methods. An attempt on the analysis of aged writing papers due to the degradation of their chemical constituents with time has been made. The degradation of its constituents with time is directly linked to the age of the paper since its production. This further links the questioned document with the fraudster, and sometimes it becomes crucial information in the court of law to reach to conclusion. The present study offers a method to discriminate, and estimate the age of unknown writing paper. The statistical models like Curve Estimation (CE), multiple linear regressions (MLR), and partial least squares regression (PLSR), are built to predict the age of the papers. The maximum dating errors are in the CE model whereas, MLR and PLSR models show excellent age estimation of unknown paper with minimum error of ±5 days and ±3 days in actual and estimated date of artificial ageing respectively. The present methodology is expected to provide valuable insight for answering the queries related to the date/age of the suspected document documents/paper artefacts. [ABSTRACT FROM AUTHOR]

Korean hand papermaking is a renowned cultural tradition in the Korean peninsula. It is still practiced while scientific analysis of paper itself from a large data set is rare. In this study, a set of more than three hundred Korean handmade papers, collected in a reference collection book Hanji: Korean handmade paper, were chemically investigated, and their property data such as colour, pH, grammage, thickness, tensile strength, folding endurance were statistically analysed in order to determine general features for Korean papers. The influence of different paper sheet formation methods (Heullimtteugi vs Gadumtteugi) were revealed by multivariate data analysis and the chemical profiles of raw materials were studied by pyrolysis–gas chromatography/mass spectrometry (Py-GC/MS). The Korean handmade paper samples display colour gamut in the colour space L* (69.9–95.9), a* [(−3)-3], b* (0–20), most have neutral/alkaline pH values. Paper density, fiber orientation and physical properties are influenced by the sheet formation techniques. For instance, Gadumtteugi tends to produce papers with strong fiber orientation while Heullimtteugi produces papers with more evenly distribution of fibers. In addition, Py-GC/MS analysis results show that paper mulberry fibers contain less intensity lignin monomers and more terpenic compounds in comparison with gampi and mitsumata fibers. This study provides paper analysis from large sample set, statistics reveal that the material preparing and making craft determined the paper structure which reflected in their physical properties. These properties influenced paper performance and applications in art creations as well as relics conservation and restoration. The characterized paper sample database could be used for handmade paper studies in East Asian region. Consequently, this study contributes to a better understanding of contemporary Hanji properties as well as improves knowledge on handmade papers from the Korean peninsula. [ABSTRACT FROM AUTHOR]

[Display omitted] • The aim of this study was to develop an eco-friendly flexible SERS substrate. • Achieving an in-situ reduction of AgNO 3 to Ag NPs on paper without any additional chemical reducing agents. • The aim of this study was to develop an eco-friendly flexible surface-enhanced Raman scattering (SERS) substrate. Over the past few decades, green analytical chemistry has gradually gained prominence worldwide due to its economic, low toxicity, and environmentally friendly characteristics. The aim of this study was to develop an eco-friendly flexible surface-enhanced Raman scattering (SERS) substrate for in situ detection of thiabendazole (TBZ). We take advantage of the reduction ability of office paper itself, achieving an in-situ reduction of AgNO 3 to silver nanoparticles (Ag NPs) on paper without any additional chemical reducing agents. The investigation of the underlying mechanism reveals that aldehydes dissolved in paper play an important role in the reduction process. Reaction time, the concentration of AgNO 3 , and the heating temperature were optimized to achieve the best SERS performance. The prepared SERS paper had high SERS activity, good reproducibility, and stability, which was evaluated by the detection of model molecules R6G and MB. Finally, the as-prepared substrate was successfully applied to detect the TBZ residue on the surface of the apple based on a wipe sampling method. The results showed that the detection limit of TBZ was 0.097 ppm and the recoveries of TBZ in actual samples range from 91.5 % to 99.7 %. Therefore, this study could provide a new way for the green synthesis of paper-based SERS substrate to detect contaminants in fruits. [ABSTRACT FROM AUTHOR]

Tobacco smoke contains a large number of harmful substances and has been widely proved to be able to induce a variety of human diseases. Human eyes are exposed to ambient air for a long time in daily life and are susceptible to air pollutants such as tobacco smoke in the air. Therefore, direct monitoring of characteristic components of tobacco smoke in human tears is expected to efficiently assess the exposure level of tobacco smoke to human eyes. Due to human tears at the microliter level, conventional sample collection and chemical analysis methods are a challenging task. Mass spectrometry (MS) has the unique advantages of high sensitivity, specificity and speed, especially, the development of ambient MS with solid substrates has greatly facilitated direct sample analysis with little or no sample pretreatment. Schirmer paper strip is clinically used for sampling of human tears, which is safe, non-invasive, and can be used for measuring the volume of tears. In this study, a small Schirmer paper strip was further prepared for noninvasive microsampling of human tears which exposed to tobacco smoke, and high voltage and an organic solvent were applied onto Schirmer paper to directly generate paper spray ionization for ambient MS analysis. The good analytical performances, including sensitivity (LOD: 0.1 μg/L, S/N≥3; LOQ: 1.0 μg/L, S/N≥10), precision (RSD: 4.89%-7.61%, n=5, with internal standard), recovery (98%-102.1%, n=5), and linear range (0.5-50 μg/L, R2=0.991 8) were achieved. Monitoring nicotine in human tears under different exposure times was also investigated, showing that the concentration of nicotine will the increase with increasing the exposure time ranging from 0 to 8 min. The nicotine can research to be 45 μg/L after burning a cigarette (about 8 min). The retention time of nicotine in human tears was found to be about 20 min (less than 5%), and the half-life time is about 4 min. Overall, our results show that Schirmer paper spray mass spectrometry could be used for qualitative and quantitative detection of trace environmental exposures such as nicotine in human eyes with many advantages, including safe, noninvasive, easy-to-operation, low-consumption as low as 1.0 μL, and thus has potential for many applications in environmental exposure and human health. [ABSTRACT FROM AUTHOR]

Different heating processes were applied to pretreat the pulp and paper mill sludge to enhance the hydrolysis stage. Hot air oven, autoclave, microwave and water bath were used for comparison. Chemical analyses exposed that all the pretreatment methods have shown improvement in solubilisation of organic matter. Among the pretreatments studied, heat transfer through hot air (80 °C for 90 min) mode had the highest impact on sludge solubilisation. There was an increase in cellulose (P = 0.0096), acid soluble (P = 0.0053) and insoluble lignin (P = 0.0012), but decrease in hemicellulose (P = 0.0009) content after pretreatment. The XRD and FT-IR spectroscopic characterisation shows the development of aliphatic, unsaturated and carbonyl carbon functionalities in the pretreated samples at higher severities. FESEM picture also confirms the change in structure after pretreatment. Thus, pretreatments contribute to disruption of the lignocellulosic structure making the cellulose easily accessible to acidogenic microorganisms. [ABSTRACT FROM AUTHOR]

This work presents an unconventional use of capacitively coupled contactless conductivity detector (C4D) for detection of gas absorption by moist paper with potential application for chemical analysis. To be suitable for measuring conductivity of moist paper absorbent, the C4D sensor was therefore designed in planar configuration. A layer of dry filter paper, only 20 mm × 25 mm in size, was placed on the C4D sensor and the device installed inside a specifically designed vaporization chamber. A vial (16 mm i.d., 8 mm high) containing a 150-μL solution of sodium bicarbonate was placed alongside. The filter paper was loaded with 110 μL of deionized water through an injection hole in the cover lid. A 100-μL aliquot of 2 M hydrochloric acid solution was directly dispensed into the vial through a second hole in the lid to generate CO 2 gas from the bicarbonate solution. It was observed that the C4D sensor gave real-time response that corresponded to the absorption of the gas and subsequent production of H+ and HCO 3 − in the moist paper. The monitored signal reached a constant value at 160 s after the addition of the acid. Chemistry of the absorption process and equivalent circuit for the C4D are proposed. Direct measurement of cement powder was chosen to demonstrate the potential use of this device for quantifying the CaCO 3 content of the cement. The calibration curve for 0.5–3 mg CaCO 3 was linear for signals recorded at 160 s: V dc = (0.172 ± 0.005) · (mg CaCO 3) + (0.016 ± 0.009), with coefficient of determination of 0.9965. Linear calibrations were also observed when the signals were monitored at various time less than 160 s. The limit of quantitation (3 SD of intercept/slope) was 0.17 mg CaCO 3. The method provided acceptable precision with %RSD of 4.6 (2 mg CaCO 3 , n = 10). Image 1 • Unconventional use of planar contactless conductivity detector is presented. • Real-time in-situ detection of CO 2 absorption by moist paper was demonstrated. • The absorption chemistry by moist paper and C4D equivalent circuit are proposed. • Potential application in direct measurement of cement powder is demonstrated. [ABSTRACT FROM AUTHOR]

Paper-based analytical devices possess desirable properties such as low cost, convenient production, and rapid output. These advantages over conventional analytical devices have attracted tremendous attention in recent years, and an abundance of fabrication techniques have been achieved with different designs. Related approaches are adopted by scientists and engineers from different research fields to create practical devices tailored for various applications. Among a diverse selection of strategies, paper-based analytical devices featuring enclosed channels can protect its contents from environmental harm, which is helpful in designing paper-based devices aimed toward practical use. However, superior properties of enclosed device designs have often been neglected when a paper-based platform is selected, and related discussion is still lacking in the field. To fill this empty space in the relevant literature, important issues are highlighted and recent research achievements are included in this article, which should have implication for scientists interested in sensing technology, analytical chemistry, material science, and miniaturized devices. For the convenience of reader's understanding, this article provides a general introduction to the basic properties and concepts of paper-based analytical devices. Firstly, commonly used fabrication strategies and detection methods are mentioned, with an in-depth emphasis on paper-based devices with enclosed channels, including breakthroughs in device types, thoughts on novel fabrication, and practical application examples. Subsequently, other important topics related to enclosed paper-based device design are summarized, and future challenges and opportunities in the field are also discussed. Image 1 • Brief introduction to the background of paper-based analytical devices. • In-depth discussion of paper-based analytical devices with enclosed channels. • How enclosed channels improve device lifetime and flow properties. • Challenges and perspective opportunities for enclosed paper-based devices. [ABSTRACT FROM AUTHOR]

In this research work, a coated paper was prepared with poly (butylene adipate-co-terephthalate) (PBAT) film to explore its use in eco-friendly food packaging. The paper was coated with PBAT film for packaging using hot pressing, a production method currently employed in the packaging industry. The coated papers were evaluated for their structural, mechanical, thermal, and barrier properties. The structural morphology and chemical analysis of the coated paper confirmed the consistent formation of PBAT bi-layered on paper surfaces. Surface coating with PBAT film increased the water resistance of the paper samples, as demonstrated by tests of barrier characteristics, including the water vapor transmission rate (WVTR), oxygen transmission rate (OTR), and water contact angle (WCA) of water drops. The transmission rate of the clean paper was 2010.40 cc m−2 per 24 h for OTR and 110.24 g m−2 per 24 h for WVTR. If the PBAT-film was coated, the value decreased to 91.79 g m−2 per 24 h and 992.86 cc m−2 per 24 h. The hydrophobic nature of PBAT, confirmed by WCA measurements, contributed to the enhanced water resistance of PBAT-coated paper. This result presents an improved PBAT-coated paper material, eliminating the need for adhesives and allowing for the fabrication of bi-layered packaging. [ABSTRACT FROM AUTHOR]

Paper microzone plates and thermal infrared enthalpimetry (TIE) were combined with potato juice as natural reagent extract to perform the determination of hydrogen peroxide in pharmaceutical, bleaching, and toiletry products. A multichannel pipette was used for reagent addition simultaneously in multiple zones of paper devices, and the temperature rise was determined using an infrared camera. In order to provide suitable measurements, some parameters were optimized such as pH, volume of reagents, and stability of the extract. Results for the hydrogen peroxide were compared with those obtained using methods from official compendia (United States Pharmacopeia and ASTM D2180 –17), with agreements ranging from 96 to 103%. The green analytical procedure index was used to compare the greenness of the proposed method with official ones, with clear advantages for TIE. Only microliters of samples and natural reagent extracts were required for analysis, and it was found that waste generation could be greatly reduced. After analysis, the paper device could be directly disposed since the final products of the reaction were O 2 and water. According to these features, the proposed method could be considered a promising alternative to routine analysis in agreement with green analytical chemistry principles. Image 1 • New sensing approach for paper devices is proposed using infrared thermal imaging. • Paper microzone plates were used to perform green enthalpimetric analysis. • Potato juice was used directly as a natural reagent extract. • Drastic reduction of waste generation, energy and time consumption was reached. • Green analytical chemistry metrics was used for comparison with official methods. [ABSTRACT FROM AUTHOR]

The study was focused on assessment of potential health risks of paper-based food contact materials (FCMs) in a step-wise approach using three toxicological bioassays in vitro and chemical analyses of migrating contaminants. 3T3 NRU cytotoxicity test showed high sensitivity to detect basal toxicity of FCMs extracts and served as a first-line test for selection of samples for further testing. The reconstructed human intestine model EpiIntestinal showed more realistic tissue response than cell culture monolayer and higher resistance despite prolonged exposure to the selected 6 samples, i.e. negligible decrease of viability and intestinal penetration, nevertheless an increase of IL-8 after exposure to black printed sample extract. Yeast based assays identified weak agonistic/antagonostic activity to human androgen receptor of the black printed sample. In accordance with the biological effects, the targeted LC and GC analytical methods confirmed the presence of high amounts of phthalates, photoinitiators and PAHs that could justify the hazard of the black printed sample. Heavily printed uncoated FCMs are recognized not to be suitable for direct contact with food. The selected bioassays and chemical analyses might be useful tools to detect targeted biological effects of xenobiotics suspected to contribute to human exposure from food. • An effect-directed approach combining bioassays and chemical analyses was proved as useful to assess possible impact of FCMs on human health. • bioassays included cytotoxicity, toxicity and penetration using reconstructed human intestinal model and endocrine disruption screen. • Extensively printed napkin samples exhibited highest toxicological risks and released phthalates, photoinitiators and PAHs. • The black printed paper extract caused IL-8 increase and agonistic activity to human androgen receptor. [ABSTRACT FROM AUTHOR]

Palladium in the form of G-Pd nanocomposite possesses multiple enzyme mimicking activity. It catalyzes the oxidation of dopamine, glutamate, H 2 O 2 and NADH through dopamine oxidase, glutamate oxidase, peroxidase and NADH oxidoreductase biomimetic activity. Kinetic studies were performed to calculate the catalytic parameters of G-Pd nanocomposite towards the substrates for a potential heterogeneous catalyst. Among them, glutamate oxidase activity was coupled with peroxidase activity of G-Pd for the detection of glutamate, in the form of a paper based sensor. Analytical performance of G-Pd nanocomposite catalyzed glutamate detection was characterized, and found to be linear in the range 0–400 μM and 400–8000 μM with limit of detection and quantification of 49.4 μM and 117.9 μM respectively. Results from the present study provides substantial progress in the practical application of nanomaterials as heterogeneous catalysts with multi enzyme mimicking property. G-Pd nanocomposite overcomes the complexity of enzyme based biosensors due to less number of reagents, better stability due to the absence of enzymes with mild storage conditions. Multi-mimetic catalytic activity of Pd will find applications in the field of analytical chemistry, biosensors, energy, environment and food safety. [ABSTRACT FROM AUTHOR]

Numerous fabrication methods have been reported for microfluidic paper-based analytical devices (μPADs) using barrier materials ranging from photoresist to wax. While these methods have been used with wide success, consistently producing small, high-resolution features using materials and methods that are compatible with solvents and surfactants remains a challenge. Two new methods are presented here for generating μPADs with well-defined, high-resolution structures compatible with solvents and surfactant-containing solutions by partially or fully fusing paper with Parafilm ® followed by cutting with a CO 2 laser cutter. Partial fusion leads to laminated paper ( l -paper) while the complete fusion results in infused paper ( i -paper). Patterned structures in l -paper were fabricated by selective removal of the paper but not the underlying Parafilm ® using a benchtop CO 2 laser. Under optimized conditions, a gap as small as 137 ± 22 μm could be generated. Using this approach, a miniaturized paper 384-zone plate, consisting of circular detection elements with a diameter of 1.86 mm, was fabricated in 64 × 43 mm 2 area. Furthermore, these ablation-patterned substrates were confirmed to be compatible with surfactant solutions and common organic solvents (methanol, acetonitrile and dimethylformamide), which has been achieved by very few μPAD patterning techniques. Patterns in i -paper were created by completely cutting out zones of the i -paper and then fixing pre-cut paper into these openings similar to the strategy of fitting a jigsaw piece into a puzzle. Upon heating, unmodified paper was readily sealed into these openings due to partial reflow of the paraffin into the paper. This unique and simple bonding method was illustrated by two types of 3D μPADs, a push-on valve and a time-gated flow distributor, without adding adhesive layers. The free-standing jigsaw-patterned sheets showed good structural stability and solution compatibility, which provided a facile alternative method for fabricating complicated μPADs. [ABSTRACT FROM AUTHOR]

A rapid method for analyzing lignin in paper using IR reflectance spectra from its surface was developed. IR absorption and reflectance spectra of model paper samples prepared from cellulose fibers obtained from deciduous and coniferous woods with various lignin contents were analyzed. The intensity of the lignin absorption band at 1510 cm after Kubelka-Munk transformation of the paper reflectance spectra and chemical data on the fiber lignin content were well correlated. The analytical relationship between the lignin content in the paper fibers and the intensity of the lignin absorption band was used to estimate the lignin concentration in samples of Russian stamping paper from the 19th century using their IR reflectance spectra. The cellulose structure parameter estimated from the paper reflectance spectra showed that sheets containing lignin (5-16%) consisted entirely of wood fibers and were supplemented with kaolin. [ABSTRACT FROM AUTHOR]

Rising concern about the use of non-permitted colourants, in common food items such as dals and green vegetables sold in Indian markets, have led to a demand for low-cost point-of-use chemical analysis tools. Conventional food-analysis techniques involving tedious sample preparation protocols are not suited for in-field applications. Surface Enhanced Raman Spectroscopy (SERS) is an analytical technique that is well-suited for point-of-use chemical analysis with molecular level detection capability, which can also serve as a quality assurance tool for businesses. Effective and rapid signal collection from a large-area sample within a field-setting using disposable, low-cost SERS substrates is a key challenge in implementing such a solution. Herein, we demonstrate the use of inkjet-printed thin films comprising of robust nanostructured-silver as flexible, paper-based SERS (P-SERS) swabs for the direct detection of Metanil Yellow (MY) from toor dal (yellow split pigeon peas) samples and Malachite Green (MG) from green peas and green chillies. The macroscopic uniformity of these thin-films in combination with a portable Raman spectrometer equipped with orbital raster scanning (ORS™) technology for signal collection results in an unprecedented precision (RSD ∼ 1.6%) upon characterizing samples saturated with Rhodamine-6G (R6G), a standard Raman probe. As several food-cleansing products have appeared in the marketplace, the adulterant removal efficacy of some commercially available 'washes' as well as products such as 'ozoniser', which was determined by SERS characterization of swabs before and after use, is also reported. Image 1 • Direct and Rapid detection of adulterants. • Highly repeatable SERS signals. • Assessment of the efficacy of adulterant-elimination using cleaning products available in the market-place. [ABSTRACT FROM AUTHOR]

Two different biocleaning techniques for stamp removal from different paper samples (handmade and machine-made) were investigated. Cellulose is the main component of handmade paper, while higher concentration of lignin is present in machine-made paper. Biocleaning methods included the direct application on paper surfaces of the extracellular enzymatic mixture (EEM) extracted from the yeast Sporidiobolus metaroseus and the recombinant protein CthediskatG of Chaetomium thermophilum var. dissitum. The produced microbial enzymes (EEM or CthediskatG) were also combined with agarose hydrogels. The effectiveness of the cleaning ability of the individual methods was determined using different spectrophotometer measurements based on colorimetric analysis and by Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR). Some tested samples were also subjected to microstructural and chemical analysis using Scanning Electron Microscope-Energy-Dispersive X-ray spectroscopy (SEM-EDX). The analysis showed that the EEM-based approaches were the most suitable, mainly they are less time-consuming and easy to produce, and moreover slight differences were displayed between EEM and CthediskatG during the removal of the stamp by hydrogel-enzyme approaches. Both EEM applications (direct and hydrogel) speed up the stamp removal process from real paper samples. However, for the complete elimination of the stamp smears a quick N , N -dimethylformamide post-treatment is advised too. [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • An integrated paper-based platform is proposed for the HSA concentration detection. • BCG reagent and HSA concentration is induced albumin-BCG complex for RGB detection. • HAS concentration of 36 real-world human samples are measured. • The results are in excellent agreement of R2 = 0.9912 versus official method. Abstract A rapid analytical platform composed of a paper-based chip (µPB-Chip) and a small analytic box is developed to determine the concentration of human serum albumin (HSA). In this study, a Bromocresol Green (BCG) reagent is dropped into the reaction area of the µPB-Chip, and the HSA concentration was derived from the R (red) value intensity of the albumin-BCG complex formed after a reaction process at 37 °C for 12 min. The effectiveness of the developed method is displayed using albumin concentrations ranging from 0 to 5 g/dL in HSA control samples. The measurement results acquired from 36 volunteer patient’s HSA samples are presented to be in good consistency with those obtained utilizing a conventional assay technique (R2 = 0.9912). Ultimately, the results show that the developed platform provides a convenient, economical and dependable method for HSA concentration detection. [ABSTRACT FROM AUTHOR]

Pressure sensor, as one of the most common components in the sensing systems, has attracted plenty of attention in recent years with urgent needs. Herein, a highly sensitive flexible pressure sensor based on conducting polymer (CP)-coated paper is developed via an ultra-simple approach of synthesis and fabrication. This paper-based sensor displays an ultra-low detection limit as low as 0.3 Pa level, and outstanding sensitivity (∼2 kPa −1 , P  ≤ 75 Pa), which can rank the top among that of the reported pressure sensors. The advantages based on paper framework such as low cost, portability, and easy disposability further enhance its feasibility. Meanwhile, combining its rapid and precise response at room temperature and the recognized stability of PPy in the ambient environment, the sensor would ensure direct and continuous environment monitoring with low energy consumption. [ABSTRACT FROM AUTHOR]

Abstract Background Food contact materials (FCM) may contain non-intentionally added substances (NIAS) as a result of reaction by-products, oligomers, degradation processes, chemical reactions between packaging materials and foodstuff, or as impurities from the raw materials used for their production. Scope and approach In this review, current approaches for the detection and identification of NIAS from paper and board FCM are presented. Reviewed are the definition of NIAS, approaches for NIAS identification and quantification, the comprehensive analysis of NIAS and the role of in silico tools and bioassays. Key Findings and Conclusions NIAS in paper and board are mostly components from printing inks, adhesives, sizing agents and surface coatings. Recycled paper contains overall more NIAS than fresh paper. Targeted analysis is generally performed for predicted NIAS, whereas an untargeted, or full-scan screening method is applied to detect and identify unpredicted NIAS. Sample preparation and contact conditions fall in two categories; migration and extraction. Migration studies are performed with food simulants while extraction studies are Soxhlet or ultrasound assisted solvent extraction. In untargeted analysis in silico tools are gaining importance in the identification of NIAS. Bioassays are used to determine the bioactivity of extracts or fractions in order to assess the potential toxicity of NIAS present in the mixture. A combination of bioassays and chemical analysis is used to direct the identification of unknown bioactive NIAS in complex mixtures like those from paper and board FCM. However, future research is required into the selection of bioassays since these should not only be sensitive enough for detecting all compounds of concern but should also have a relevance with human health. [ABSTRACT FROM AUTHOR]

Cationic paper was prepared by reaction of paper with 2,3-epoxypropyltrimethylammonium chloride in aqueous suspension, and tested as low-cost adsorbent for wastewater treatment. The experimental results revealed that anionic dyes (Acid Orange 7, Acid Red 18, and Acid Blue 92) were adsorbed on the cationic paper nicely. The maximum amount of dye Acid Orange 7 adsorbed on cationic paper was 337.2 mg/g in experimental conditions. The effects of initial dye concentration, temperature, and initial pH of dye solution on adsorption capacity of cationic paper were studied. The pseudo-first-order and pseudo-second-order kinetic models were applied to describe the kinetic data. The Freundlich and Langmuir adsorption models were used to describe adsorption equilibrium. The thermodynamic data indicated that the adsorption process of dye on cationic paper occurred spontaneously [ABSTRACT FROM AUTHOR]

In this paper, we describe a validated paper-based microfluidic analytical device for the simultaneous quantification of two important biomarkers of renal function in urine. This paper platform provides an inexpensive, simple, and easy to use colorimetric method for the quantification of creatinine (CRN) and uric acid (UA) in urine samples. The microfluidic paper-based analytical device (μPAD) consists of a main channel with three identical arms, each containing a circular testing zone and a circular uptake zone. Creatinine detection is based on the Jaffé reaction, in which CRN reacts with picrate to form an orange-red product. Uric acid quantification is based on the reduction of Fe 3+ to Fe 2+ by UA, which is detected in a colorimetric reaction using 1,10-phenanthroline. Under optimum conditions, obtained through chemometrics, the concentrations of the analytes showed good linear correlations with the effective intensities, and the method presented satisfactory repeatability. The limits of detection and the linear ranges, respectively, were 15.7 mg L −1 and 50–600 mg L −1 for CRN and 16.5 mg L −1 and 50–500 mg L −1 for UA. There were no statistically significant differences between the results obtained using the μPAD and a chromatographic comparative method (Student's t -test at 95% confidence level). [ABSTRACT FROM AUTHOR]

On-site rapid monitoring of nitrite as an assessment indicator of the environment, food, and physiological systems has drawn extensive attention. Here, electrokinetic stacking (ES) was combined with colorimetric reaction on a paper-based device (PAD) to achieve colorless nitrite detection with smartphone. In this paper, nitrite was stacked on the paper fluidic channel as a narrow band by electrokinetic stacking. Then, Griess reagent was introduced to visualize the stacking band. Under optimal conditions, the sensitivity of nitrite was 160-fold increased within 5 min. A linear response in the range of 0.075 to 1.0 μg mL−1 (R2 = 0.99) and a limit of detection (LOD) of 73 ng mL−1 (0.86 μM) were obtained. The LOD was 10 times lower than the reported PAD, and close to that achieved by a desktop spectrophotometer. The applicability was demonstrated by nitrite detection from saliva and water with good selectivity, adding 100 times more concentrated co-ions. High recovery (91.0~108.7%) and reasonable intra-day and inter-day reproducibility (RSD < 9%) were obtained. This work shows that the sensitivity of colorless analyte detection-based colorimetric reaction can be effectively enhanced by integration of ES on a PAD.Schematic of the experimental setups (left) and the corresponding images (right) of the actual portable device. [ABSTRACT FROM AUTHOR]

A novel washing technique for microfluidic paper-based analytical devices (μPADs) that is based on the spontaneous capillary action of paper and eliminates unbound antigen and antibody in a sandwich immunoassay is reported. Liquids can flow through a porous medium (such as paper) in the absence of external pressure as a result of capillary action. Uniform results were achieved when washing a paper substrate in a PDMS holder which was integrated with a cartridge absorber acting as a porous medium. Our study demonstrated that applying this washing technique would allow μPADs to become the least expensive microfluidic device platform with high reproducibility and sensitivity. In a model μPAD assay that utilized this novel washing technique, C-reactive protein (CRP) was detected with a limit of detection (LOD) of 5 μg mL. [ABSTRACT FROM AUTHOR]

Abstract: The paper manufacturing process remained unchanged for many centuries, until, in the nineteenth century, the crisis of rags led industrialized countries to patent new production processes with different raw materials. This study deals with this period of transition by analyzing four samples stored at the archives of Superintendency Beni Architettonici per il Paesaggio e per il Patrimonio Storico Artistico ed Etnoantropologico (BAPPDAD) of Venice Lagoon, based in the Palazzo Ducale. The samples were analyzed by FT-IR (ATR), SEM-EDS, HPLC-MS/MS and Py-GC/MS. These techniques allow the characterization of various raw materials and adhesives used in various stages of paper production. These analyses have found a gradual introduction of ground wood in the composition of papers from the mid-nineteenth century, and the use of rosin as glue only in more recent documents. [Copyright &y& Elsevier]

An improved paper-based analytical device (PAD) using color screening to enhance device performance is described. Current detection methods for PADs relying on the distance-based signalling motif can be slow due to the assay time being limited by capillary flow rates that wick fluid through the detection zone. For traditional distance-based detection motifs, analysis can take up to 45 min for a channel length of 5 cm. By using a color screening method, quantification with a distance-based PAD can be achieved in minutes through a “dip-and-read” approach. A colorimetric indicator line deposited onto a paper substrate using inkjet-printing undergoes a concentration-dependent colorimetric response for a given analyte. This color intensity-based response has been converted to a distance-based signal by overlaying a color filter with a continuous color intensity gradient matching the color of the developed indicator line. As a proof-of-concept, Ni quantification in welding fume was performed as a model assay. The results of multiple independent user testing gave mean absolute percentage error and average relative standard deviations of 10.5% and 11.2% respectively, which were an improvement over analysis based on simple visual color comparison with a read guide (12.2%, 14.9%). In addition to the analytical performance comparison, an interference study and a shelf life investigation were performed to further demonstrate practical utility. The developed system demonstrates an alternative detection approach for distance-based PADs enabling fast (∼10 min), quantitative, and straightforward assays. [ABSTRACT FROM AUTHOR]

Microfluidic paper-based analytical devices (μPADs) are a versatile and inexpensive point-of-care (POC) technology, but their widespread adoption has been limited by slow flow rates and the inability to carry out complex in field analytical measurements. In the present work, we investigate multilayer μPADs as a means to generate enhanced flow rates within self-pumping paper devices. Through optical and electrochemical measurements, the fluid dynamics are investigated and compared to established flow theories within μPADs. We demonstrate a ∼145-fold increase in flow rate (velocity = 1.56 cm s−1, volumetric flow rate = 1.65 mL min−1, over 5.5 cm) through precise control of the channel height in a 2 layer paper device, as compared to archetypical 1 layer μPAD designs. These design considerations are then applied to a self-pumping sequential injection device format, known as a three-dimensional paper network (3DPN). These 3DPN devices are characterized through flow injection analysis of a ferrocene complex and anodic stripping detection of cadmium, exhibiting a 5× enhancement in signal compared to stationary measurements. [ABSTRACT FROM AUTHOR]

Here, we report a highly water‐soluble colorimetric and fluorescent pH probe that works in the pH range 0.2–3.0. The probe showed a rapid response, high stability, and excellent reversibility to acidity. Moreover, the fluorescence of probe was not influenced by the existence of high concentration of cations. The pKa of probe was calculated to be 2.25 ± 0.06. Furthermore, the pH test papers coated with the probe exhibited a distinct color change in acidic conditions. [ABSTRACT FROM AUTHOR]

We report a quantitative analytical method using the naked eye. The method is based on the coffee-ring effect on paper, which converts a colored solution to stains on the paper. It is found that the width of the colored stains is correlated to the concentration of analyte so that quantitative analysis can be accomplished using a ruler. The influence of the shape and lamination of the paper reservoir to the test results is studied to find the optimal one for unambiguous analysis. It is also found that the sample color does not cause interference to the test. The applicability of the method to quantitative chemical analysis is demonstrated by detection of glucose and lactate. [ABSTRACT FROM AUTHOR]

Smoothness is an important factor in consumer perception of tissue quality, with physical modification and chemical additions to the paper able to enhance tissue handle. Therefore objective measurement of the papers mechanical properties in developing new products and maintaining existing quality is vital. In this study the surface chemical composition of the softener treated paper is investigated using ToF-SIMS, and related to the surface frictional properties of the paper. [ABSTRACT FROM AUTHOR]

Highly sensitive and portable sensors are tools to improve personal protection from exposures to unwanted toxic chemicals. A paper-based colorimetric sensor was designed and prepared to sensitively and selectively detect trace amounts of methyl isothiocyanate (MITC) in the air. Taking advantage of a detoxification reaction existing in the mammalian body, glutathione (GSH) becomes unique in indirectly sensing the concentration of methyl isothiocyanate. The reaction mechanism was analyzed, and the detection conditions were optimized. Nanofibrous membrane materials were utilized as a solid substrate with ultrahigh surface areas. An organic polar solvent with high adsorptive capacity to MITC was applied on the fiber surfaces. A combination of three factors drives the detection of traces toxic gas in air kinetically favorable. [ABSTRACT FROM AUTHOR]

In this article, a low-cost, simple, and rapid fabrication of paper-based analytical devices (PADs) using a wax screen-printing method is reported here. The acid-base reaction is implemented in the simple PADs to demonstrate to students the chemistry concept of a limiting reagent. When a fixed concentration of base reacts with a gradually increasing concentration of acid, a dramatic demonstration allows students to discover the limiting reagent by naked eyes observing the color change from phenolphthalein as an indicator. This demonstration is not only a new approach to enhancing students' learning of the chemistry concept of the limiting reagent, but also presents potential applications of PADs into all levels of chemistry from middle school through college classes. [ABSTRACT FROM AUTHOR]

The article presents a study that evaluates the efficiency of calcium phytate and calcium hydrogen carbonate treatment in stabilizing cellulose degradation caused by iron gall ink on molecular level. It cites that combination of calcium phytate, a chelating agent, and calcium hydrogen carbonate, a deacidification agent, was applied in three types of paper including the historic paper, Whatman filter paper and model paper. An ageing process was performed after the phytate treatment to test its long stability. It notes that an efficient treatment can suppress the formation of new carbonyls groups and cleavage of the cellulose chain. It concludes that the treatment is most efficient on inked historic rag paper as no degradation is observed after the application of the treatment.

Laboratory experiments were developed to introduce students to the quantitation of drugs of abuse by high performance liquid chromatography-tandem mass spectrometry (LC-MS/MS). Undergraduate students were introduced to internal standard quantitation and the LC-MS/MS method optimization for cocaine. Cocaine extracted from paper currency was analyzed with a simple and rapid LC-MS/MS method. Students in advanced laboratories determined the amount of amphetamine, methamphetamine, and oxycodone on currency in addition to cocaine. The LC-MS/MS method has a short run time (2.5 min) to allow for a high throughput of student samples. [ABSTRACT FROM AUTHOR]