Search

Ecuador is a country with several climate zones. However, their behaviour is similar throughout the year, with no peaks of extreme temperatures in the various seasons. This paper is a first approach to study the adaptive comfort behaviour in several areas and populations of the country. Considering the ASHRAE 55-2020 model, energy simulation programmes are applied not just to the current climate scenario but also to the climate change scenarios of 2050 and 2100. The results of locations are analysed and compared to determine their performance. Thanks to their climate characteristics, adaptive comfort models could be applied as a passive strategy, using natural ventilation for building indoor comfort improvement, particularly social dwellings. According to previous studies, some prototypes have not considered the climate determinants in each region. Given the geographic situation of the study areas, the adaptive comfort model could be applied in all cases. Percentages of application of natural ventilation and heating and cooling degree hours have similar behaviours according to the climatic region, with a variation greater than 30% among them. [ABSTRACT FROM AUTHOR]

The Mandya district of Karnataka, India, houses a unique Jain settlement constructed about 1000 years ago. Recent excavations by the Archaeological Survey of India (ASI) indicate a high degree of engineering skills among the builders of this settlement. Adapting to heat-stresses in a region where the Monsoons often failed was and is still a matter of concern. Ingenious methods were adopted to modulate bioclimatic responses to maintain thermal comfort indices. The Aretippurians used composite building fabrics which modulated heat transfer to the interiors. Indeed, the thermal transmittances for these composite fabrics were low to moderate for both the temple complexes as well as the dormitories; these were 0.27 Wm−1K−1 and 0.23 Wm−1K−1, respectively. A site visit revealed that a unique and engineered micro-climate was also made to prevail on this hilltop settlement housing several hundred Jain settlers. A granite skirted reservoir was indeed the pièce-de-résistance promoting hydraulic air-conditioning for eight months of the year around the premises with copious winds blowing over a large and exposed rain-fed reservoir. This fanned chilled air across the open plan temples, courtyards, and lived-in areas. This paper explores bioclimatic responses for around 120 residents to the prevailing indoor settings modulated by an engineered microclimate. This was possible because of the staggered layout, unique building forms, use of mixed building fabric, and carefully chosen glazing ratios which yielded salubrious settings. Clearly, this entailed a complex interplay between the intercepted solar insolation, structure-driven turbulence, and the transfer of heat across the original composite walls within and around the complex, requiring a systematic experimental as well as modelling study. The experimental part of the project involved the calculation of the thermal transmittivity across the walls made up of fired bricks, granite, and limestone, and the theoretical part involved the use of appropriate software to reconstruct air flow and heat distribution across floors, walls, and ceilings to proxy the original flow pattern yielding the comfortable PMV (predicted mean vote) and PET (physiological equivalent temperature) values within these premises. This exercise may well lead to further explorations on indoor comfort adaptations in tropical settings with the use of many edifying vernacular idioms in ancient settlements which prevail even in modern layouts. [ABSTRACT FROM AUTHOR]

• The physiological equivalent temperature (PET) and the universal thermal climate index (UTCI) are considered adaptive thermal comfort evaluation indices applicable to transition space. • The strong wind is prone to occur in winter on Huajiang campus. It is important to take precautions against the discomfort caused by a strong wind. • The outdoor thermal comfort condition of Huajiang campus in summer is better than it in winter. • Adjusting the coverage of lawn, marble floor, water surface and landscape trees can effectively regulate the microclimate of the library's inner courtyard space. The inner courtyard is an important transition space for mass exchange and heat transfer between the internal space of courtyard buildings and the external environment. A good layout of courtyard space is conducive to building energy efficiency and human thermal comfort. In the paper, we analyze the impacts of different design schemes of the spatial layout on the microclimate of inner courtyard space using field measurements and numerical simulation methods. The analysis of the measured data presents the main meteorological factors affecting the thermal comfort of the courtyard. The magnitude of the effects is ranked as air temperature, total solar radiation intensity, near-surface air flow rate, and relative humidity. Results of the ENVI-met simulation show that changing the cover of different underlying surface types leads to different microclimate regulation effects in the sense that the temperature and relative humidity in summer drops up to 3.53 °C and 15.59%, respectively and in winter increase up to 3.97 °C and 37.21%, respectively. This paper proposes that lawn ground, marble ground, water surface and landscape tree coverage of 25%, 25%, 50% and 75%, respectively, are suitable design schemes for the inner courtyard space of library. [ABSTRACT FROM AUTHOR]

Highlights • A modern house with diverse spaces was investigated. • Spatial configuration, microclimate and thermal comfort were studied. • The spatial configuration provides a good building microclimate. • The spatial configuration provides the possibility for occupants' adaptive actions. • Considerable summer thermal comfort can be achieved in the microclimate. Abstract In this paper, the authors attempt to clarify the relationship between spatial configuration, building microclimate and thermal comfort through the investigation of a modern house in hot and humid climate with spatial diversity. Firstly, the spatial configuration of the house was analysed in detail. The spatial geometric features, spatial boundary conditions, and human activities in the building were categorised. Secondly, field measurements were conducted to investigate the microclimate of the house. The air temperature, relative humidity and wind velocity were monitored on typical summer days. Thirdly, a dynamic thermal simulation was performed to predict the thermal comfort performance of the building over the period of an entire summer. The simulated results were compared with the measurements, and the adaptive thermal comfort approach was used to evaluate the thermal comfort. The modern house studied was found to have a varied spatial configuration, similar to local vernacular buildings, which produces diverse thermal environments in the building. The microclimate of this specific building could provide considerable thermal comfort for the occupants in summer under the local climate conditions, although thermal comfort cannot be achieved through free-running model in the hottest days, mechanical cooling or mixed model are needed. [ABSTRACT FROM AUTHOR]

Many post-occupancy comfort studies of energy renovated residential buildings have documented elevated temperatures above comfort levels, not only during the summer period but also during the shoulder months. The main focus in renovation projects is on heat savings while the risk of overheating is not considered. This paper analyze in which situations overheating and cooling need to be addressed in building energy renovation projects and which renovation measures are causing this need. The analysis contains four reference single family houses from central and northern Europe. Both dynamic and static methods were used to assess the overheating risk. In terms of overheating occurrences, the most critical renovation measures are the insulation of the floor and the increase of the airtightness. The contribution of decreasing the g value of the window glazing is positive. The way to energy efficiency improvements also results in an extension of the overheating period and higher average and maximum building temperatures. The increase of the ventilation rates and the use of shading systems are useful measures for preventing overheating increase. The paper will highlight the inconsistencies which arise from the use of different criteria and also propose suggestions for future work. [ABSTRACT FROM AUTHOR]

Designing for indoor thermal environmental conditions is one of the key elements in the energy efficient building design process. This paper introduces a development of the Chinese national Evaluation Standard for indoor thermal environments (Evaluation Standard). International standards including the ASHRAE55, ISO7730, DIN EN, and CIBSE Guide-A have been reviewed and referenced for the development of the Evaluation Standard. In addition, over 28,000 subjects participated in the field study from different climate zones in China and over 500 subjects have been involved in laboratory studies. The research findings reveal that there is a need to update the Chinese thermal comfort standard based on local climates and people's habitats. This paper introduces in detail the requirements for the thermal environment for heated and cooled buildings and free-running buildings in China. [ABSTRACT FROM AUTHOR]

To move to holistic indoor environmental quality (IEQ) assessment methods of residential building performance in Australia, a relevant evidence base on the comfort behaviour and preferences of contemporary households is needed. A lack of information on the environmental conditions, behaviour and preferences relevant to dwellings in Australia’s hot humid climates has been revealed as an area of ongoing policy and research interest. This paper explores the cooling practices of households living in predominantly naturally ventilated dwellings in Darwin, the Northern Territory through a survey of behaviour, preferences and dwelling construction (n = 102) and a 12-month longitudinal thermal comfort study in 20 houses (n = 2535). The results show that these households employ a range of adaptive behaviours in response to warm and hot conditions. The houses were almost always naturally ventilated, with the assistance of ceiling fans for approximately 50% of the time. The limited use of air-conditioning in these houses is more strongly associated with indoor humidity levels than temperature. These patterns of comfort behaviour provide a basis for the enhancement of building simulation models for the performance assessment of dwellings in naturally ventilated mode in hot humid climates in Australia. [ABSTRACT FROM AUTHOR]

This paper uses an example of an architect designed and occupied suburban house in the temperate climate of Perth, Western Australia to demonstrate how climatic design and low-technology active systems can deliver thermal comfort in average climatic conditions. However when thermal conditions are more extreme acceptable temperature ranges may not be met. Thermal monitoring in the house over eight days of extreme temperatures in summer and winter shows that acceptable temperature ranges may not be met in winter. During extreme winter conditions south facing rooms fall below comfort conditions by up to 3 K in the late night and early morning. The conclusion drawn is that in naturally ventilated buildings personal and psychological behavioral adaptation must go hand-in-hand with climatic design. This behavioral adaptation may become more important in the future if current climatic extremes become the new normal. [ABSTRACT FROM AUTHOR]

In recent times, numerical simulations are increasingly gaining ground for the energy saving and thermal comfort evaluation of historical buildings. In the present paper a transient 2D model of the Pavilion 2 B of the Ex-Mattatoio (Past abattoir) in Rome is presented, created by Computational Fluid Dynamics (CFD) software based on the finite element method (FEM). The simulations take into account time variations and interactions between indoor and outdoor thermal conditions, with the aim of evaluating different usage profiles and of estimating passive cooling effects in presence of natural ventilation and high thermal masses. The main goal of this work is to show the CFD numerical models potential in quantifying the cooling effects and the indoor thermal comfort conditions, in order to enhance passive and hybrid strategies based on natural ventilation and nocturnal thermal masses precooling. [ABSTRACT FROM AUTHOR]

• Provided a platform to test various residential building control systems. • Used probability of occupancy to determine setback temperature when unoccupied. • Integrated optimizer with adaptive and occupancy control. • Generated dynamic electricity tariff based on wholesale electricity pricing. • Evaluated the peak load shaving potential with dynamic pricing and optimization. Energy consumption in buildings continues to rise with increased deployment of energy-consuming equipment such as Heating, Ventilation, and Air Conditioning (HVAC) amid a growing world economy. Renewable energy is projected to comprise a majority of the future electricity supply, but the intermittent nature of renewables means that consumption must respond to dynamic supply for optimal utilization. This paper proposes a novel HVAC control strategy for residential buildings using the adaptive comfort model, considering occupancy through probability and real-time information, and optimizing the HVAC schedule to reduce cost, maintain thermal comfort, and respond to the dynamic availability of renewable energy while being generalizable to different situations. To validate this approach, the Universal CPS Environment for Federation (UCEF) co-simulation platform is used to connect advanced building controls with the building energy simulation software EnergyPlus. Simulations are performed for a residential building in Sacramento, CA during a typical summer week. Economic impacts, energy consumption, and thermal comfort are analyzed for traditional, adaptive, and occupancy-based control strategies under demand-based, tiered, and fixed electric tariff systems. Simulation results show that occupancy consideration, adaptive thermal comfort, and optimization can reduce cost by 50.1 %, electricity consumption by 52.9 %, and discomfort by 56.2 % compared to traditional fixed setpoints. The ability of the proposed HVAC control strategy to shift energy consumption away from peak times under a demand-based tariff system is qualitatively analyzed and findings suggest that maximum load-shifting on a grid-scale is attained using occupancy consideration with optimized control and demand-based pricing. For individual residential buildings, similar economic benefits can be gained using the less-complex adaptive HVAC control strategy with existing tiered or simple electric tariff systems. [ABSTRACT FROM AUTHOR]

Seasonal variation of thermal comfort demands directly affects the energy needs for heating or cooling purpose. In previous studies, the differences of neutral temperatures between summer and winter were revealed, but the studies on the difference of human thermal adaption in transitional seasons are insufficient. To clarify this, this paper presents a year-long survey which was carried out in 505 residential buildings in six cities located in the Hot Summer and Cold Winter (HSCW) zone of China involving 11,524 subjects. Results show a significant difference of adaptive responses in different seasons, and a lag of behavioral responses behind climate change in transitional seasons is observed. Occupants not only adjust clothing insulation according to air temperature in different seasons, but also actively control indoor air movement, including closing/opening windows and using fans. The seasonal, monthly and daily neutral temperatures are studied, implying that occupants’ thermal experience has significant effect on their thermal comfort by behavioral, physiological and psychological paths. According to the comparative study, the running mean air temperature method and aPMV model are recommended in free-running space. The findings provide scientific evidence to the concept that dynamic thermal comfort temperature range should be considered in evaluation of indoor thermal environment. [ABSTRACT FROM AUTHOR]

Thermal comfort study was carried out in the hostels of National Institute of Technology Calicut, Kerala, which is located in a warm humid climatic zone of India. Measurements of ambient temperature, globe temperature, relative humidity, air velocity and illuminance were carried out in eight hostels, and in parallel a paper-based survey was conducted among students to know about their Thermal Preference Vote (TPV) and Thermal Sensation Vote (TSV) based on an ASHRAE seven-point scale. Predicted Mean Vote (PMV) and Predicted Percentage Dissatisfied (PPD) have been evaluated based on Fanger's theory of thermal comfort by utilizing the field measurements. Preferred operative temperature and neutral effective temperature were obtained based on the Predicted Mean Vote (PMV). Similarly the preferred operative temperature and neutral effective temperature were identified, for both Thermal Sensation Vote (TSV) and Thermal Preference Vote (TPV). Thermal comfort conditions for 80% satisfaction were also determined in each case. Correlations between the Predicted Mean Vote (PMV) and the Thermal Sensation Vote (TSV) as well as between the Predicted Mean Vote (PMV) and the Thermal Preference Vote (TPV) were obtained. [ABSTRACT FROM AUTHOR]

• A study on housing stock improvement potential in Mediterranean areas is presented. • Three typical case studies were chosen from the stock of a southern Spanish city. • Monitoring on environmental and electricity data and tests logged real performance. • Energy models were built and adjusted based on real occupancy conditions. • The considered building retrofits raise indoor temperature and reduce discomfort. Renovating buildings is one of the major targets within the current European goals toward decarbonized cities in 2050. The residential stock offers extensive opportunities to achieve current energy horizons, since more than 75% of the existing buildings in the European Union are energy deficient, with poorly insulated thermal envelopes which drive indoor conditions far from current comfort standards. This paper aims to provide a protocol for forecasting the upgrading potential of this housing stock in southern Europe, particularly in Mediterranean areas, identifying the level of obsolescence and possibilities for improvement, especially in winter indoor thermal conditions, offered by standard passive strategies. Following an architectural, constructive, and energy analysis of common patterns throughout the urban stock of the southern Spanish city of Córdoba, three case studies built-in 1951–1980 – pre-dating the first Spanish regulations on thermal conditioning in buildings – were selected for the assessment. Long-term monitoring and in situ tests (i.e., infrared thermography, airtightness) recorded the performance of these buildings under real occupancy conditions, subsequently incorporating them into the calibration of simulation energy models, aiming to predict the potential improvements after implementing standard passive strategies in these buildings. Results show that building retrofits not only improve the quality of indoor thermal conditions by increasing indoor temperatures by 3–4 °C but also almost eliminate occupied hours outside the comfort range. [ABSTRACT FROM AUTHOR]

Nowadays one of the most pressing objectives toward a sustainable development is to construct bioclimatic passive buildings. Vernacular architecture is more and more recognized as a source of inspiration for facing this challenge. The main purpose of this paper is to identify how and how much vernacular architecture implements the most performing bioclimatic strategies in the Mediterranean climate. The work starts from the analysis of the island of Sardinia as a case study. The bioclimatic strategies are analyzed by applying the adaptive thermal comfort approach. Several Design Reference Years (DRYs) are defined by elaborating climate data from stations all over regional territory, and then they are inputted in Szokolay’s bioclimatic chart. The results of the analysis are then compared with the characteristics of the Sardinian vernacular built heritage, to verify if and how those strategies were applied. The findings reveal that, in Mediterranean mild, but variable, climate, vernacular architecture incorporates bioclimatic strategies in order to meet both underheating and overheating needs in different ways. In some cases there can be found a strong correlation between constructive and morphological features and climatic contexts. [ABSTRACT FROM AUTHOR]

In light of growing concerns about climate change and energy conservation, the adaptive thermal comfort theory has become a research focus. However, to date, few about the dynamic process of human thermal adaptation has been explored. In this paper, we ask the question as to whether people accustomed to one indoor climate can readapt to another one? And what about the timescale and difficulty of thermal re-adaptation? A comparative study was conducted in China where wintertime indoor thermal environments remarkably varied between the northern region (with pervasive district heating) and southern region (without district heating). Four college student groups were surveyed in teaching buildings and over 2000 valid responses were collected. The results show that occupants’ subjective thermal comfort perception is strongly influenced by their previous thermal experience. People accustomed to indoor climate excellence are able to readapt themselves to environments with lesser quality, however, the adapting process may take some time. The effort of this study shed some light on the dynamic process of human thermal adaptation, which is helpful to shape the future indoor climate. [ABSTRACT FROM AUTHOR]

Windows are central for the development of liveable nearly zero-energy homes and require careful consideration. Various studies have indicated that the effect of windows on energy consumption may change significantly with improved building insulation levels. Current guidelines on windows may therefore not apply in very well-insulated buildings, and more up-to-date information is needed about window solutions that are appropriate for the new conditions. This study maps the effect of multiple combinations of window size and basic glazing—and frame properties on energy, daylighting and thermal comfort in nearly zero-energy houses located in the European cities Rome and Copenhagen. The aim was to identify options that can support the easy and robust design of future homes with typical use of roof and façade windows. Hourly daylight levels were calculated in DAYSIM, while space heating demand and operative temperatures were calculated in EnergyPlus. The results support previous findings on the limited ability of nearly zero-energy buildings to utilise solar gains. It was found that U -values are becoming increasingly important for the energy performance of windows. The paper sketches the increased flexibility and related possibilities that may appear with improved roof window frame constructions and glazing U -values far lower than currently standard levels. [ABSTRACT FROM AUTHOR]

In Europe and worldwide several legislations are adopting comfort models that include the variability of occupants behaviour based on the external climate conditions. The latest adaptive comfort methods consider outdoor temperature not only as a steady variable but also as the representation of occupants past thermal history. The paper presented deals with a summer environmental monitoring carried out in a Sardinian earth building. These traditional houses are very often without AC systems and the control of summer conditions is based mainly on natural ventilation. By the use of adaptive comfort model, the different thermal performance between the upper and lower floor of the two storey building are investigated. Different models have been implemented, some included in current technical standards, some other still experimental. The results show the capability of the case-study to provide comfort conditions, but only in the lower floor. The upper floor that traditionally was used as a depository and now hosts the bedrooms shows overheating problems. The change of use, in this case, is the main cause of the bad performance, as highlighted by the microclimatic survey. [ABSTRACT FROM AUTHOR]

[Display omitted] • Thermostat Interactive Interfaces allow real-time decision-making. • Adaptive premises offer tailored HMI that address behavioral problems on thermostats. • Serious Games applied on Thermostats provide community decisions toward saving energy. • Tailored Adaptive strategies promote energy reductions without losing thermal comfort. • Personality traits, player type, and energy consumer give insights for personalized interfaces. The residential Heating Ventilation and Air-Conditioning (HVAC) system use around 3/5 of the total energy consumption. Connected thermostats optimize the HVAC operation; however, householders have personality traits that lead into behavioral and usability problems toward the thermostat's interface usage. Thus, a serious game applied in the thermostat interface can balance entertainment and education. Therefore, thermostat interfaces must address strategies that reduce energy without losing thermal comfort. This paper proposed an interactive interface type and a predicted interface type based on an HVAC strategy and a Natural Ventilation strategy. These strategies measured the impact of adaptive thermal comfort, energy consumption, and costs. Hence, twelve energy models located in California (Concord, Riverside, Los Angeles, and San Diego) were simulated using EnergyPlus™ through LadybugTools. The first interactive interface included Serious Game elements, so the householder interacted with the date, location, and setpoint. The second interface predicted the energy consumption and thermal comfort during winter and summer in Concord by a two-layer feed-forward Artificial Neural Network structure. The proposed structure decreases the energy consumption by at least 62% without losing thermal comfort. [ABSTRACT FROM AUTHOR]

The concept of adaptive thermal comfort was formulated many decades ago and has been validated in numerous field studies. As a result, wider acceptable indoor temperature ranges based on adaptive models have been included in international and national standards and the adaptive approach to thermal comfort is regarded as a significant contributor in achieving low energy building design and operation. Despite the ever-increasing scientific literature on adaptive comfort around the world, the overall understanding of how to translate the adaptive principles into design practice and concepts for operating buildings is still limited, which suggests a gap between the scientific outcomes and the real-world applications. This discussion paper identifies the challenges and gaps in using the principles of adaptive thermal comfort by design practitioners and discusses them in light of relevant research findings. More than 100 literature sources were reviewed in support of the discussion. The paper then proposes a framework that aims to facilitate the adoption of adaptive comfort principles in design and operation of buildings and describes the outline of an imminent guideline for low energy building design based on the concept of adaptive thermal comfort. [ABSTRACT FROM AUTHOR]

Abstract: The adaptive thermal comfort theory considers people as active rather than passive recipients in response to ambient physical thermal stimuli, in contrast with conventional, heat-balance-based, thermal comfort theory. Occupants actively interact with the environments they occupy by means of utilizing adaptations in terms of physiological, behavioural and psychological dimensions to achieve ‘real world’ thermal comfort. This paper introduces a method of quantifying the physiological, behavioural and psychological portions of the adaptation process by using the analytic hierarchy process (AHP) based on the case studies conducted in the UK and China. Apart from three categories of adaptations which are viewed as criteria, six possible alternatives are considered: physiological indices/health status, the indoor environment, the outdoor environment, personal physical factors, environmental control and thermal expectation. With the AHP technique, all the above-mentioned criteria, factors and corresponding elements are arranged in a hierarchy tree and quantified by using a series of pair-wise judgements. A sensitivity analysis is carried out to improve the quality of these results. The proposed quantitative weighting method provides researchers with opportunities to better understand the adaptive mechanisms and reveal the significance of each category for the achievement of adaptive thermal comfort. [Copyright &y& Elsevier]

Abstract: A thermal comfort field survey has been conducted in five towns from two climatic zones in Tunisia. Two hundred persons were concerned by this survey. They have been asked in their houses and working places at their normal living conditions once each month during 1 year. The selected sample of buildings has been chosen among free running buildings. Only few office buildings were equipped with heating systems but not with air conditioning systems. The survey results have been processed and correlations between sensations and globe temperatures have been found. The comfort temperatures have been calculated for each location and each month. They have been correlated with the mean outdoor air temperature and with the outdoors running mean temperature. Robust correlations have been found. The description of this survey and the methodology of data analysis are described in details in this paper. The main results are discussed and compared with those of similar surveys conducted in different geographic locations. [Copyright &y& Elsevier]

This paper investigates adaptive thermal comfort during summer in medical residences that are located in the French city of Troyes and managed by the Association of Parents of Disabled Children (APEI). Thermal comfort in these buildings is evaluated using subjective measurements and objective physical parameters. The thermal sensations of respondents were determined by questionnaires, while thermal comfort was estimated using the predicted mean vote (PMV) model. Indoor environmental parameters (relative humidity, mean radiant temperature, air temperature, and air velocity) were measured using a thermal environment sensor during the summer period in July and August 2018. A good correlation was found between operative temperature, mean radiant temperature, and PMV. The neutral temperature was determined by linear regression analysis of the operative temperature and Fanger's PMV model. The obtained neutral temperature is 23.7 °C. Based on the datasets and questionnaires, the adaptive coefficient α representing patients' capacity to adapt to heat was found to be 1.261. A strong correlation was also observed between the sequential thermal index n (t) and the adaptive temperature. Finally, a new empirical model of adaptive temperature was developed using the data collected from a longitudinal survey in four residential buildings of APEI in summer, and the obtained adaptive temperature is 25.0 °C with upper and lower limits of 24.7 °C and 25.4 °C. [ABSTRACT FROM AUTHOR]

Retrofitting heritage buildings for energy efficiency is not always easy where cultural values are highly concerned, which requires an integrated approach. This paper aims to assess the potential of applying passive retrofitting scenarios to enhance indoor thermal comfort of heritage buildings in North Africa, as a hot climate, a little attention has been paid to retrofit built heritage in that climate. A mixed-mode ventilation residential building in Cairo, Egypt, was selected as a case study. The study combines field measurements and observations with energy simulations. A simulation model was created and calibrated on the basis of monitored data in the reference building, and the thermal comfort range was evaluated. Sets of passive retrofitting scenarios were proposed. The results (based on the ASHRAE-55-2020 adaptive comfort model at 90% acceptability limits) showed that the annual thermal comfort in the reference building is very low, i.e., 31.4%. The application of hybrid passive retrofitting scenarios significantly impacts indoor thermal comfort in the reference building, where annual comfort hours of up to 66% can be achieved. The originality of this work lies in identifying the most effective energy measures to improve indoor thermal comfort that are optimal from a conservation point of view. The findings contribute to set a comprehensive retrofitting tool that avoids potential risks for the conservation of residential heritage buildings in hot climates. [ABSTRACT FROM AUTHOR]

• Building Bio-Climatic Charts are proposed for different climate change scenarios. • Time-varying significance of nine design parameters in this century are provided. • Effectiveness of airtightness will increase up to 329% by the end of this century. • Cooling potentials of natural ventilation will significantly decrease up to 69%. • A holistic passive design can reduce the building annual cooling load by 56.7%. The application of passive design strategies is crucial at the early architectural design stage for building energy use minimization. However, the time-varying effectiveness of passive design strategies in responding to future climate change in hot and humid climates are rather limited in the literature. This paper aims to examine the dynamic effectiveness of passive design strategies for residential buildings in Hong Kong under the context of future climate change. Using the newly developed hourly weather data and adaptive comfort standard model, the dynamic effectiveness of viable passive design strategies for residential buildings are evaluated over time in the 21st century by plotting Givoni building bio-climatic charts (BBCC) and simulation-based sensitivity analyses in a validated EnergyPlus model. Results show that solar protection strategies are still the highly sensitive strategies for building energy performance and the effectiveness of external windows' airtightness is expected to increase up to 329% by the end of this century, whereas the cooling potential of ventilation utilization will significantly decrease over time. When the different combination of sensitive passive design parameters is implemented onto the baseline residential building model for different climate scenarios, the annual and peak cooling load can be reduced up to 56.7% and 64.5%, respectively. [ABSTRACT FROM AUTHOR]

• We applied support vector machine algorithms to predict thermal sensation vote. • The new model can distinguish thermal comfort response in different contexts. • It produces high prediction accuracy in both air conditioning and natural ventilation cases. • Comfort zones determined by the new model are similar to the existing ones. Many models can predict building occupants' thermal comfort, but their accuracies were not always perfect due to the limited self-learning and self-correction capability when varying the application contexts. Advances in machine learning algorithms allow us to reveal the "hidden insights" behind a large amount of data, offering a great opportunity to understand more nuanced aspects of thermal comfort in buildings. This study applied the support vector machine (SVM) algorithm to the RP-884 thermal comfort database and developed a new model with self-learning and self-correction ability. We identified its application range according to the features of the SVM algorithm and the sample distribution characteristics of RP-884. With variables of indoor air temperature, clothing insulation, metabolic rate, air velocity and so forth, the model can largely reduce the previous models' inaccuracy. Compared to the PMV model, the new model's sum of squares for residuals (SSE) reduced by 96.4%, and the fitting degree (R new) increased by 83.7%. It can also quantify the effects of each input variable on building occupants' thermal sensation. Instead of using two separate models, the data-driven model can automatically distinguish occupants' thermal comfort responses in natural ventilation (NV) and air-conditioning (AC) buildings. Using the new model, we determined thermally comfortable zones on the psychrometric chart for NV and AC buildings. Moreover, an open-access platform has been developed to help apply machine learning algorithms in thermal comfort data analysis. The work introduced in this paper can be a reference for a more comprehensive comfort model development. Image, graphical abstract [ABSTRACT FROM AUTHOR]

• Development of a new comfort-oriented control strategy for a mixed-mode building. • Simulations and experimental implementation of the strategy on a controller. • Online solution of a flow network to optimise widows opening. • Thermal comfort and energy performance comparison with a baseline controller. The paper presents the development, implementation and performance investigation via simulations and experiments of a comfort-oriented control strategy for natural ventilation and mechanical air conditioning management of a mixed-mode building. The proposed comfort-oriented control strategy determines whether it would be possible to operate in natural ventilation mode or in mechanical heating/cooling. The control algorithm calculates first the optimal opening percentage of the windows according to adaptive thermal comfort criteria. If natural ventilation cannot guarantee the thermal comfort requirements and mechanical conditioning is required, the algorithm dynamically optimises the heating or cooling set-point targeting a defined Predicted Mean Vote (PMV) index objective. The performance of the proposed controller was tested via simulations and experiments by using a residential mixed-mode building as a case study. The house features operable windows, a reverse-cycle ducted air conditioner and a comprehensive experimental control and monitoring infrastructure. A comparison with a baseline control strategy was performed to evaluate the comfort and energy performance improvement potential of the proposed control algorithm. The comfort-oriented controller was proven to outperform the baseline controller in terms of maintaining comfort in accordance with targets set by the current comfort standards, such as deviation from a PMV set-point or the middle of the adaptive thermal comfort band. The building energy consumption was also reduced in cooling dominated conditions. The experimental tests demonstrated that this logic can be integrated in an embedded controller, and its performance is in line with the expected one from the simulation results. [ABSTRACT FROM AUTHOR]