Search

Background: In 2009, the promulgation of US Food and Drug Administration (FDA) tobacco regulation focused attention on cigarette flavor additives. The tobacco industry had prepared for this eventuality by initiating a research program focusing on additive toxicity. The objective of this study was to analyze Philip Morris' Project MIX as a case study of tobacco industry scientific research being positioned strategically to prevent anticipated tobacco control regulations. Methods and Findings: We analyzed previously secret tobacco industry documents to identify internal strategies for research on cigarette additives and reanalyzed tobacco industry peer-reviewed published results of this research. We focused on the key group of studies conducted by Phillip Morris in a coordinated effort known as ''Project MIX.'' Documents showed that Project MIX subsumed the study of various combinations of 333 cigarette additives. In addition to multiple internal reports, this work also led to four peer-reviewed publications (published in 2001). These papers concluded that there was no evidence of substantial toxicity attributable to the cigarette additives studied. Internal documents revealed post hoc changes in analytical protocols after initial statistical findings indicated an additive-associated increase in cigarette toxicity as well as increased total particulate matter (TPM) concentrations in additive-modified cigarette smoke. By expressing the data adjusted by TPM concentration, the published papers obscured this underlying toxicity and particulate increase. The animal toxicology results were based on a small number of rats in each experiment, raising the possibility that the failure to detect statistically significant changes in the end points was due to underpowering the experiments rather than lack of a real effect. Conclusion: The case study of Project MIX shows tobacco industry scientific research on the use of cigarette additives cannot be taken at face value. The results demonstrate that toxins in cigarette smoke increase substantially when additives are put in cigarettes, including the level of TPM. In particular, regulatory authorities, including the FDA and similar agencies elsewhere, could use the Project MIX data to eliminate the use of these 333 additives (including menthol) from cigarettes. [ABSTRACT FROM AUTHOR]

Background: More than 90% of the cigarettes sold worldwide have a filter. Nearly all filters consist of a rod of numerous (> 1 2 000) plastic-like cellulose acetate fibres. During high speed cigarette manufacturing procedures, fragments of cellulose acetate that form the mouthpiece of a filter rod become separated from the filter at the end face. The cut surface of the filter of nearly all cigarettes has these fragments. In smoking a cigarette in the usual manner, some of these fragments are released during puffing. In addition to the cellulose acetate fragments, carbon particles are released also from some cigarette brands that have a charcoal filter. Cigarettes with filters that release cellulose acetate or carbon particles during normal smoking conditions are defective. Objective: Specific goals were to review systematically the writings of tobacco companies to: (a) identify papers that would document the existence of defective filters; (b) characterise the extent of the defect; (c) establish when the defect became known; (d) determine whether the defect exists on cigarettes marketed currently; (e) assess the prevalence of the defect on cigarettes manufactured by different companies; (f) define whether the knowledge of the defect had been withheld by the tobacco company as confidential and not disclosed publicly; and (g) ascertain the feasibility of correcting or preventing the defect. Methods: Document searches utilised databases of the scientific literature, medical journals, chemical abstracts, US Patents, Tobacco Abstracts, papers presented at tobacco meetings and court documents. Results: Sixty one documents of Philip Morris, Inc were selected for study because they disclosed specifically the "fall-out" of cellulose acetate filter fibres and, for cigarettes with charcoal filters, carbon particles from cigarette filters. The term "fall-out" was defined in 1 985 laboratory protocols of Philip Morris, Inc. as "loose fibers (or particles) that are drawn out of the filter during puffing of the cigarette". As early as 1957, the health concern of inhaling cellulose acetate fibres released from cigarette filters was addressed by Philip Morris, Inc. A 1962 document reported the results of laboratory tests conducted by Phillip Morris, Inc that compared the "fall-out" of cellulose acetate fibres from the filters of their cigarettes (Marlboro) and cigarettes of their competitor (Liggett & Meyers). A 1997 overview by Phillip Morris of documents addressing the "fallout of carbon particles and cellulose acetate fibers from bIters" stated that they were "essentially routine reports" of cigarette filter assays, and referenced a "Filter Fallout" memo written in 1961 -more than 40 years ago. Most likely these tests are being conducted presently as illustrated by a 1999 report that details the revisions of the "fall-out" protocol of Phillip Morris, Inc and reports the results of tests that measured the discharge of cellulose acetate fibres and silica gel from beta cigarettes with a new type of filter. Our analysis of the "fall-out" tests results presented in the 61 "fall-out" documents showed that filter fibres and carbon particles were discharged from the filters of all types of cigarettes tested. These cigarette types (n = 130) included both coded cigarettes and popular brand name cigarettes. No publications were found in the scientific literature of the "fail-out" studies. Thus, the results of the "fall-out" studies are thought to have been withheld as confidential to Philip Morris, Inc. We have identified also other companies that have tested recently cigarettes for defective filters. In addition, our searches have shown that simple, expedient, and inexpensive technologies for decontaminating cigarette filters of loose cellulose acetate fibres and particles from the cut surface of the filter have been developed and described in 1997 and 1998 US patents. What is more important is that these patents also define methods for preventing or reducing the broken plastic-like fibres that arise during cigarette making. Many US patents (n = 607; 1957 to 2001) have been awarded for cigarette filters. Some of these inventions describe novel materials and unique filtration schemes that would eliminate or minimise the discharge of filter materials into mainstream smoke. Conclusions: We have shown that: (a) the filter of today's cigarette is defective; (b) Philip Morris, Inc has known of this filter defect for more than 40 years; (c) the existence of this filter defect has been confirmed by others in independent studies; (d) many methods exist to prevent and correct the filter defect, but have not been implemented; and (e) results of investigations substantiating defective filters have been concealed from the smoker and the health community. The tobacco industry has been negligent in not performing toxicological examinations and other studies to assess the human health risks associated with regularly ingesting and inhaling non-degradable, toxin coated cellulose acetate fragments and carbon microparticles and possibly other components that are released from conventional cigarette filters during normal smoking. The rationale for harm assessment is supported by the results of consumer surveys that have shown that the ingestion or inhalation of cigarette filter fibres are a health concern to nearly all smokers. [ABSTRACT FROM AUTHOR]

The issues related to tobacco harm reduction continue to challenge the tobacco control research and policy communities. The potential for combusting tobacco products to reduce exposure and risk remains largely unknown, but this has not stopped manufacturers from offering such products making these claims. The role of oral tobacco products in a harm reduction regimen has also been a source of dialogue and debate. Within the last few years, major cigarette manufacturing companies have begun selling smokeless products for the first time, claiming to target current cigarette smokers. Other cigarette manufacturers are also offering smokeless products in markets around the world. The harm reduction debate has at times been divisive. There has been no unifying set of principles or goals articulated to guide tobacco control efforts. In particular, the research needs are extraordinarily high in order to drive evidence-based policy in this area and avoid the mistakes made with "light" cigarettes. This paper discusses recommendations from a strategic dialogue held with key, mostly US-based tobacco control researchers and policy makers to develop a strategic vision and blueprint for research, policy and communications to reduce the harm from tobacco for the US. Short-term and long-term objectives are described. [ABSTRACT FROM AUTHOR]

The article reports on the origin and history of cigarettes. There are several legends concerning the origin of the modern cigarette. There *are legends to the effect that the cigarette was invented by the Turks and that cigarette smoking was common in Turkey, Russia, and the Levant where British travelers encountered the habit and carried it to England and thence to the United States. But regardless of the many legends, it would seem that the modern cigarette--that is, tobacco enclosed in a paper tube--is a Spanish adoption of the Latin American original. It is a diminutive of "cigar" which in turn is derived from the Spanish cigarro, itself a diminutive, meaning "little garden." In Spain almost every family had its little garden of tobacco. According to a French authority cigarettes were smoked for a long time in France but it was not until 1864 that they were manufactured commercially. The extensive advertising campaigns engaged in by the tobacco "trusts" greatly aided in popularizing the cigarette, not only in the United States but also throughout the world.

The author offers insights about cigarette yield assessment and associated public policy in the U.S. A variety of products are available to people who are dependent of nicotine. These products, which satisfy their drug craving, include pipe tobaccos, cigars, and smokeless tobacco products. Others opt for roll-your-own tobacco, papers, and paper tubes with filters. Due to pressure from the U.S. Federal Trade Commission, cigarette manufacturers have been putting tar/nicotine yields in advertising copy since 1971.

The article focuses on a paper related to smoking cessation, published in the May 2004 issue of "Journal of General Internal Medicine." The steady decline in cigarette consumption observed in the U.S. since the 1960s supports the view that the cigarette companies are slowly losing their grip on smokers. As cigarette consumption has fallen the major cigarette manufacturers in the U.S. have responded by spending more, not less on market research, advertising and promotions in an effort to expand and retain market share. Cigarette companies have invested mostly heavily and competed most aggressively to capture and retain young adult smokers. The difference between health awareness and health concern is something that cigarette makers have carefully considered in their marketing plans.