Search

The significance of fuzzy volume percentage on the unsteady flow of MHD tangent hyperbolic fuzzy hybrid nanofluid towards an exponentially stretched surface is scrutinized. The heat transport mechanism is classified by Joule heating, nonlinear thermal radiation, boundary slippage, and convective circumstances. Ethylene glycol (EG) as a host fluid along with the nanomaterial's Cu and Al 2 O 3 are used for heat transfer analysis is also considered in this investigation. The nonlinear governing PDEs are meant to be converted into ODEs employing appropriate renovations. Then, a built-in MATLAB program bvp4c is employed to acquire the outcome of the given problem. The variation of flow rate, thermal heat, drag force and Nusselt number and their influence on fluid flow with heat transfer have been scrutinized through graphs. An increase in thermal radiation, power law index and nanoparticle volume friction heightens the heat transmission rate. Skin friction is diminished by swelling the power-law index, Weissenberg number, and ratio parameters, whereas it is increased by enhancing the magnetic parameter. The heat transfer rate upsurges with an increase in Weissenberg number and nanoparticle volume fraction. Also, the nanoparticle volume percentage is expressed as a triangular fuzzy number (TFN). The triangular membership function (MF) and TFN are regulated by the χ - cut parameter, which has a range of 0 to 1. In comparison to nanofluids, hybrid nanofluids have a higher heat transmission rate, according to the fuzzy analysis. This investigation has applications in the areas of paper manufacturing, metal sheet cooling and crystal growth. [ABSTRACT FROM AUTHOR]

This contribution aims to optimize nonlinear thermal flow for Darcy-Forchheimer Maxwell fuzzy Al 2 O 3 + Cu + TiO 2 /EO tri-hybrid nanofluid flow across a Riga wedge in the context of boundary slip. Three types of nanomaterials, Al 2 O 3 , Cu and TiO 2 have been mixed into the basic fluid known as engine oil. Thermal properties with the effects of porous surface and nonlinear convection have been established for the particular combination Al 2 O 3 + Cu + TiO 2 /EO. Applying a set of appropriate variables, the set of equations that evaluated the energy and flow equations was transferred to the dimensionless form. For numerical computing, the MATLAB software's bvp4c function is used. The graphical display is used to demonstrate the influence of several influential parameters. It has been observed that flow rate decay with expansion in porosity parameter and nanoparticles volumetric fractions. In contrast, it rises with wedge angle, Grashof numbers, Darcy-Forchheimer, nonlinear Grashof numbers, and Maxwell fluid parameter. Thermal profiles increase with progress in the heat source, nanoparticles volumetric fractions, viscous dissipation, and nonlinear thermal radiation. The percentage increases in drag force for ternary hybrid nanofluid are 13.2 and 8.44 when the Modified Hartmann number takes input in the range 0.1 ≤ Mh ≤ 0.3 and wedge angle parameters 0.1 ≤ m ≤ 0.3 . For fuzzy analysis, dimensionless ODEs transformed into fuzzy differential equations and employed symmetrical triangular fuzzy numbers (TFNs). The TFN makes a triangular membership function (M.F.) that describes the fuzziness and comparison. This study compared nanofluids, hybrid nanofluids, and ternary nanofluids through triangular M.F. The boundary layer flow caused by a wedge surface plays a crucial role in heat exchanger systems and geothermal. [ABSTRACT FROM AUTHOR]

This contribution aims to optimize nonlinear thermal flow for Darcy-Forchheimer Maxwell fuzzy Al 2 O 3 + Cu + TiO 2 /EO tri-hybrid nanofluid flow across a Riga wedge in the context of boundary slip. Three types of nanomaterials, Al 2 O 3 , Cu and TiO 2 have been mixed into the basic fluid known as engine oil. Thermal properties with the effects of porous surface and nonlinear convection have been established for the particular combination Al 2 O 3 + Cu + TiO 2 /EO. Applying a set of appropriate variables, the set of equations that evaluated the energy and flow equations was transferred to the dimensionless form. For numerical computing, the MATLAB software's bvp4c function is used. The graphical display is used to demonstrate the influence of several influential parameters. It has been observed that flow rate decay with expansion in porosity parameter and nanoparticles volumetric fractions. In contrast, it rises with wedge angle, Grashof numbers, Darcy-Forchheimer, nonlinear Grashof numbers, and Maxwell fluid parameter. Thermal profiles increase with progress in the heat source, nanoparticles volumetric fractions, viscous dissipation, and nonlinear thermal radiation. The percentage increases in drag force for ternary hybrid nanofluid are 13.2 and 8.44 when the Modified Hartmann number takes input in the range 0.1 ≤ Mh ≤ 0.3 and wedge angle parameters 0.1 ≤ m ≤ 0.3 . For fuzzy analysis, dimensionless ODEs transformed into fuzzy differential equations and employed symmetrical triangular fuzzy numbers (TFNs). The TFN makes a triangular membership function (M.F.) that describes the fuzziness and comparison. This study compared nanofluids, hybrid nanofluids, and ternary nanofluids through triangular M.F. The boundary layer flow caused by a wedge surface plays a crucial role in heat exchanger systems and geothermal. [ABSTRACT FROM AUTHOR]

The significance of fuzzy volume percentage on the unsteady flow of MHD tangent hyperbolic fuzzy hybrid nanofluid towards an exponentially stretched surface is scrutinized. The heat transport mechanism is classified by Joule heating, nonlinear thermal radiation, boundary slippage, and convective circumstances. Ethylene glycol (EG) as a host fluid along with the nanomaterial's Cu and Al 2 O 3 are used for heat transfer analysis is also considered in this investigation. The nonlinear governing PDEs are meant to be converted into ODEs employing appropriate renovations. Then, a built-in MATLAB program bvp4c is employed to acquire the outcome of the given problem. The variation of flow rate, thermal heat, drag force and Nusselt number and their influence on fluid flow with heat transfer have been scrutinized through graphs. An increase in thermal radiation, power law index and nanoparticle volume friction heightens the heat transmission rate. Skin friction is diminished by swelling the power-law index, Weissenberg number, and ratio parameters, whereas it is increased by enhancing the magnetic parameter. The heat transfer rate upsurges with an increase in Weissenberg number and nanoparticle volume fraction. Also, the nanoparticle volume percentage is expressed as a triangular fuzzy number (TFN). The triangular membership function (MF) and TFN are regulated by the χ - cut parameter, which has a range of 0 to 1. In comparison to nanofluids, hybrid nanofluids have a higher heat transmission rate, according to the fuzzy analysis. This investigation has applications in the areas of paper manufacturing, metal sheet cooling and crystal growth. [ABSTRACT FROM AUTHOR]

In nature, symmetry is all around us. The symmetry framework represents integer partial differential equations and their fractional order in the sense of Caputo derivatives. This article suggests a semi-analytical approach based on Aboodh transform (A T) and the homotopy perturbation scheme (HPS) for achieving the approximate solution of time-fractional porous media and heat transfer equations. The A T converts the fractional problems into simple ones and obtains the recurrence relation without any discretization or assumption. This nonlinear recurrence relation can be decomposed via the use of the HPS to obtain the iterations in terms of series solutions. The initial conditions play an important role in determining the successive iterations and yields towards the exact solution. We provide some numerical applications to analyze the accuracy of this proposed scheme and show that the performance of our scheme has strong agreement with the exact results. [ABSTRACT FROM AUTHOR]

In this work, the heat transfer features and stagnation point flow of Magnetohydrodynamics (MHD) hybrid second-grade nanofluid through a convectively heated permeable shrinking/stretching sheet is reported. The purpose of the present investigation is to consider hybrid nanofluids comprising of Alumina Al 2 O 3 and Copper Cu nanoparticles within the Sodium Alginate (SA) as a host fluid for boosting the heat transfer rate. Also, the effects of free convection, viscous dissipation, heat source/sink, and nonlinear thermal radiation are considered. The converted nonlinear coupled fuzzy differential equations (FDEs) with the help of triangular fuzzy numbers (TFNs) are solved using the numerical scheme bvp4c. The numerical results are acquired for various engineering parameters to study the Nusselt number, skin friction coefficient, velocity, and temperature distribution through figures and tables. For the validation, the current numerical results were found to be good as compared to existing results in limiting cases. It is also inspected by this work that with the enhancement of the volume fraction of nanoparticles, the heat transfer rate also increases. So, it may be taken as a fuzzy parameter for a better understanding of fuzzy variables. For the comparison, the volume fraction of nanofluids and hybrid nanofluid are said to be TFN [0, 0.1, 0.2]. In the end, we can see that fuzzy triangular membership functions (MFs) have not only helped to overcome the computational cost but also given better accuracy than the existent results. Finding from fuzzy MFs, the performance of hybrid nanofluids is better than nanofluids. [ABSTRACT FROM AUTHOR]

The prime objective of the current study is to examine the effects of third-grade hybrid nanofluid with natural convection utilizing the ferro-particle Fe 3 O 4 and titanium dioxide TiO 2 and sodium alginate (SA) as a host fluid, flowing through vertical parallel plates, under the fuzzy atmosphere. The dimensionless highly nonlinear coupled ordinary differential equations are computed adopting the bvp4c numerical approach. This is an extremely effective technique with a low computational cost. For validation, it is found that as the volume fraction of Fe 3 O 4 + TiO 2 hybrid nanoparticles rises, so does the heat transfer rate. The current and existing results with their comparisons are shown in the form of the tables. The present findings are in good agreement with their previous numerical and analytical results in a crisp atmosphere. The nanoparticles volume fraction of Fe 3 O 4 and TiO 2 is taken as uncertain parameters in terms of triangular fuzzy numbers (TFNs) [0, 0.05, 0.1]. The TFNs are controlled by α − cut and the variability of the uncertainty is studied through triangular membership function (MF). [ABSTRACT FROM AUTHOR]

In this framework, the boundary-layer mass and heat flow in a liquid film over an unsteady stretching cylinder are discussed under the influence of a magnetic field. By means of the similarity transformations the highly non-linear governing system of PDE is converted to ODE. We use the built-in function bvp4c in MATLAB to solve this system of ODE. The impact of distinctive parameters on velocity and temperature profile in the existence of an external magnetic field is depicted via graphs and deep analysis is also presented. [ABSTRACT FROM AUTHOR]